Sulphur Wdg 80% Suppliers and Manufacturers

Model 4L126TIL Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 545(401)/2,200 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 11.4 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 114 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536

Model 4L126TIM Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 495(364)/2,100 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.9 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 102 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536

Model 4L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 450(331)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.3 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 88 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536

Double Tube Batten Light Emergency Vapor Tight LED Tueb Light No-corrosion bridge wiring designed LED Batten Tube Light Fixture This Double Tube Batten Light adopts SMD2835 chips, can achieve higher lumen out put. The tubes of this emergency tube light fixture adopts bridge wiring design, no need to consider the power direction of the tube. It's easy for installation of the Double Tube Batten Light. Besides, the huge terminal of the tube light fixture is easy for wiring. This vapor tight tube batten light adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof. This vapor tight tube batten light can be widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements. Lamp Luminous Efficiency(lm/w): 120 Warranty(Year): 3-Year Type : LED triproof tube light fixture Application: Office, Warehouse, Garage, Factory Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-PTBLP44-5FT-CE Color Temperature(CCT) : 5500K Input Voltage(V): AC 110 or 230V( �± 10%) Color Rendering Index(Ra): 80 Support Dimmer: NO Lifespan (hours): 50000 Working Time (hours): 50000 Length: 5ft IP Rate: IP 65 Beam angle: 120 Degree Material: PC + PC Wattage: 2*22w

Technical Parameters Travel of X and Y Axes: 800x1200 mm; Maximum cutting thickness/ Maximum height of the part: 700 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 985x1580 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 160 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150 �¼s; Approx. Machine size (LxWxH): 2600x2400x1800 mm; Approx. Machine weight: 4500 kg; Approx. Machine control cabinet size: 670x630x1800 mm; Approx. Machine control cabinet weight: 200 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 â??. ;

Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 2980 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.

Technical Parameters: Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2180 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.

Technical Parameters Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1790 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.

Technical Parameters Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1480 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.

Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 3000 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.

Technical Parameters : Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2200 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.

Technical Parameters : Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1800 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.

Technical Parameters : Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1500 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.

Bucket Elevator Product Introduction: A bucket elevator is a fixed mechanical conveying equipment mainly suitable for continuous vertical lifting of powdered, granular, and small materials. It can be widely used for lifting loose materials in various scale feed factories, flour mills, rice mills, oil mills, starch factories, grain depots, port terminals, etc. The bucket elevator is used to vertically lift block and granular materials such as limestone, coal, gypsum, clinker, dry clay, as well as powdered materials such as raw materials, cement, and coal powder that pass through the crusher. According to the different operating speeds of the hopper, bucket elevators can be divided into three forms: centrifugal discharge, gravity discharge, and mixed discharge. The centrifugal unloading hopper has a fast speed and is suitable for conveying materials with small grinding properties such as powder, granular, and small pieces; Gravity discharge has a slower bucket speed and is suitable for conveying bulk, high density, and high grindability materials, such as limestone and clinker. The traction components of a bucket elevator include ring chains, plate chains, and tape. The structure and manufacturing of the ring chain are relatively simple, and the connection with the hopper is also very strong. When conveying materials with high grinding properties, the wear of the chain is relatively small, but its own weight is relatively large. The plate chain structure is relatively sturdy and lightweight, suitable for elevators with large lifting capacity. However, the hinge joint is prone to wear and tear, and the structure of the tape is relatively simple, but it is not suitable for conveying materials with high grinding properties. The temperature of ordinary tape materials does not exceed 60 , steel rope tape allows material temperature to reach 80 and the temperature of materials transported by ring chain and plate chain can reach 250 â??. Application: This series of bucket elevators is suitable for conveying powdery, granular, and small pieces of non abrasive and low abrasive materials, such as coal, cement, stones, sand, clay, ore, etc. Due to the traction mechanism of the elevator being a circular chain, it allows for the transportation of materials with higher temperatures (material temperature not exceeding 250 ). The general conveying height can reach up to 40 meters.

Battery-powered rail coachscrewing machine is a new product developed by our company in accordance with international requirements for environmental protection. Using lithium battery as energy source, low-voltage and high-current DC motor as power, it has the characteristics of small size and high power. It is suitable for the tightening operation of ordinary sleeper vertical bolts, turnout sleeper vertical bolts, and high-speed railway sleeper plate vertical bolts. BENEFITS *36V super endurance trolley impact Li-battery Wrench *Super endurance capability, 3000 bolts are loosened and tightened per charge (M27 Boltï¼? *Intelligent torque adjustable design, the operator can set the working torque according to the actual working conditions *Intelligent electronic control technology, the actual working torque will not change with the decrease of battery power *Intelligent digital display, working torque and real-time power digital display *The whole machine is waterproof and can work in rainy days, and can also work under minus 30 degrees *The whole machine is 41 kg, which can be quickly disassembled and assembled, which is convenient for loading and unloading without additional tools SPECIFICATION Rated power 2Kw (brushless DC motor) No-load speed 0-1200rpm Frequency 0-2300 bpm Maximum tightening torque 3000Nm Maximum unscrewing torque 3500Nm Switch type Three switches, safety start switch and forward and reverse switch Illumination Dual LED lights Adjustable torque range digital display 80-500Nm (10Nm increment adjustment) Tightening time of M24 bolts 3~5s Weight â?¤41.5Kg (including sleeve and battery pack) Operating temperature requirements minus 30�°C~45�°C Rated voltage of battery 36V Rated capacity of battery 36Ah Endurance 3000 bolts are loosened and tightened per charge (M27 Boltï¼? Battery life 1000 cycle times of charge Waterproof rating of the whole machine IP45 (safe to use even in heavy rain)

TRANSMISSION OIL RANGE BVM (MANUAL) GEARBOXES MINERAL SAE 75W-80 STANDARDS AND SPECIFICATIONS API GL-4+ BMW MTF LT-2 PSA B71 2330 MTF 94 TRANSELF TRJ GEAR MULTIBOX 75W80 is intended for the lubrication of gearboxes fitted in most private passenger cars. GEAR MULTIBOX 75W80 is suitable for RENAULT BVMs requiring API GL-4+ standard. GEAR MULTIBOX 75W80 is perfectly adapted for vehicle BVMs ALFA ROMEO, MERCEDES, ROVER, SMART, VOLKSWAGEN, VOLVOâ?¦ ï?? Excellent extreme-Pressure and anti-wear properties ï?? Compatibility with non-ferrous metals (ensures the length of life of synchronized components) ï?? Smoother gear change ï?? Increased gearbox life, thanks to additive technology used by original equipment manufacturers for years ï?? Rationalisation of LV gearbox oils PERFORMANCE LEVELS API GL-4 / GL-4+ BMW MTF LT-2 FIAT 955550-MZ-6 GM 1940768 HONDA MTF / MTF-II / MTF-III SPECIAL GEAR OIL, MTF 94 NISSAN MT-XZ NISSAN MT-XZ, type TL/JR PSA B71 2330 / 2315 TRANSELF NFJ (gearbox JBX, JCX, JHX, JRX, NDX, TLX) TRANSELF NFP (gearbox PKX, PFX, VMX, NEX, NGX, NOX, UNX) TRANSELF TRJ VW G 009 317 Oxidation resistance Shear stability Extreme-pressure level EXPERIENCE IN OPERATIONAL USE FORD-M2C-186-A GM 1940764 MB 235.10 TRANSELF TRT / TRZ VOLVO 97308 / 97309

This T8 twin tube LED weatherproof fitting adopts SMD2835 chips, can achieve higher lumen out put. The tubes of this lT8 twin tube LED weatherproof fitting adopts bridge wiring design, no need to consider the power direction of the tube. It's easy for installation of the T8 twin tube LED weatherproof fitting. Besides, the huge terminal of the LED weatherproof fitting is easy for wiring. This vapor tight LED light fitting adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof. It widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements. Lamp Luminous Efficiency(lm/w): 130 Warranty(Year): 3-Year Type : LED triproof tube light fixture Application: Office, Warehouse, Garage, Factory Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-PTBLP40-4FT-CE Color Temperature(CCT) : 5000K (Daylight) Input Voltage(V): AC 110 or 230V( �± 10%) Color Rendering Index(Ra): 80 Support Dimmer: NO Lifespan (hours): 50000 Working Time (hours): 50000 Length: 5ft IP Rate: IP 65 Beam angle: 120 Degree Material: PC + PC Wattage: 2*20w

The woodworking industry in Ukraine, particularly in the Transcarpathian region, is flourishing due to abundant forest resources. Transcarpathia boasts a significant forest cover, ranking first in Ukraine. The region's forests, covering 695.8 thousand hectares, primarily consist of beech (58.2%), spruce (26.4%), oak (8.5%), and other tree species (7.9%). Notably, more than 80% of the forested area is in the mountainous part of the region. With 52% forest coverage, the region has 0.55 hectares of forests and 165 cubic meters of wood per capita, surpassing national averages. Over the past 50 years, forest area has increased by 10,000 hectares, with an average reserve of 358 cubic meters per hectare. The town of Zhdeniyevo houses a modern woodworking enterprise on a 2-hectare land with state-of-the-art equipment, capable of producing 25-30 cubic meters of finished products per shift. The enterprise's equipment includes a Vertical band sawmill, laser buzzer, non-burning saw INEX, four-sided machine, cutting machine, grinding machine, wood chipper, and drying Termolegno. This facilitates the production of various wood products from both soft and hard wood. The enterprise is contributing to the national economy by producing more than 300 types of goods for domestic and foreign markets. It focuses on modernization, forming production chains, and ecological considerations. The main goal is to develop the unused wood processing base, creating environmentally friendly wood products for domestic and international markets, thereby generating employment for the local population. The lumber available for sale includes edged lumber made from high-quality softwood and hardwood, meeting specific customer requirements in various dimensions. Polish Wood to be sold: Edged lumber is made from high-quality softwood and hardwood in accordance with the requirements and exact specifications of customers. The main dimensions for ordering are: 22 x 143 x 1200 22 x 98 x 1200 22 x 143 x 800 16:17 x 95 x 1200 Also, if necessary, it is possible to order an individual of any size on request

455 kHz ceramic discriminator is a component commonly used in radio receivers, particularly in AM (amplitude modulation) radios. The use of a ceramic material in the discriminator helps to provide stability and accuracy in the demodulation process, as ceramic materials can have well-defined resonant properties at specific frequencies. MAXIMUM RATINGS Withstanding Voltage : D.C. 50V. 1 minute (Between each terminal) Insulation Resistance : 100 M�© min. at D.C. 100V (Between each terminal) Input signal level : 5dB (50�© Termination ) Operating Temperature Range : - 20â?? to + 80 â?? Storage Temperature Range : 25 �±5â?? ELECTRICAL CHARACTERISTICS ( 0â?? to + 40 â?? ) Item Requirements Distortion (at 455 KHz) 2.0% max Recovered Audio 3dB Bandwidth (from 450KHz) �±4.0 KHz min. Recovered Audio Output Voltage (at 455KHz) 100 �± 40 mV Test Method Input signal Condition Input level : 80dB Frequency Deviation : �±4.0KHz Modulation Frequency : 1 KHz Recovered Audio Input the above signal and sweep the carrier frequency 3dB Bandwidth around 455 KHz and find out the maximum audio output frequency. Then sweep the carrier frequency again and find two frequencies which are observed -3dB attenuation points from the maximum point . Higher frequency point is called (f1) and lower called (f2), (f1-455KHz)is defined as upper 3dB bandwidth and (455Khz-f2) Recovered Audio Recovered audio output voltage shall be measured Output Voltage when the carrier frequency is adjusted to 455KHz. The Distortion Carrier frequency is adjusted to 455Khz. And then , distortion shall be measured with 1 kHz modulation frequency For more information please visit our website

LED Batten Lighting Emergency Tri-color Linear Luminaire This LED Batten Lighting Luminaire with sliding design is suitable for stair well,office, corridor,parking lots. This LED Linear Light is easy for installation. And this LED Linear Light adopts stainless steel base, so that the intensity of this led linear fixture can achieve IK10. This LED Batten Lighting Luminaire has high transmittance milky diffuser and high lumen out put SMD2835 LED chips, so that the luminous efficiency of this LED Emergency Tri-color Linear Luminaire can achieve 130lm/w. The safety hooks design of this LED Emergency Tri-color Linear Luminaire is more convenient and safe for installation. The clip-fixed backup battery design of this LED Linear Light makes the maintenance and replacement more easier. And the emergencny function enable the LED Batten Lighting Luminaire to operate continuously for more than 3 hours in emergency situations. It's very practical. Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-NSBLP40-4FT-CE-3CCT Color Temperature(CCT): 3000K/4000K/5000K Input Voltage(V): AC200-240V Color Rendering Index(Ra): 80 Lifespan (hours): 50000 Working Time (hours): 50000 Length: 4ft CCT: 3000K/4000K/5000K Beam angle: 120 Degree