HR3210 Micro-power Pressure Transmitter overviews HR3210 series are lower power consumption pressure transmitter,which produced especially to measure liquid pressure in the field without power supply. It is stable, reliable, high precision and easy to assembly and disassemble. It uses well-known brands pressure sensor in the world and 1Cr18Ni9Ti stainless steel structure, intrinsic safety type circuit design. The biggest advantage of the transmitter is low power consumption , the operating current is lower than 900uA, so it is easy for dry battery to supply in the field. Quick response, the single-chip can be used to make the intermittent power supply pressure acquisition system. It can reach the balance within 400 uS when power on, obtain accurate data, and then turn off the power. It will turn on when collecting data. Features .Long time and reliable operating .Low power consumption, high accuracy .Protection by the isolated and stainless steel 316L diaphragm, anti-corrosion Specifications Range 0ï½?1ï¼?1.6,2,2.5ï¼?â?¦100Kpaï¼?MPa Over-load liquid level 1.5tims F.S accuracy ±0.25%FS, ±0.5%FS, ±1%FS (Non linearity, repeatability, hysteresis) Operating Temp. ï¼?15ï½?+60 Compatible medium Compatible with 1Cr18Ni9Ti and fluoro rubber Operating current < 900uA Output Signal 0.25ï½?2.25Vdcï¼?0.25-2.25Vdcï¼?0.5-4.5Vdc Voltage 3ï½?5Vdcï¼? Insulation > 100MΩ@500V Electrical connections Direct cable, housing protection IP65 Pressure interface M20Ã?1.5M; or customized Response time
HR3288 HART Smart Pressure Transmitter Overview .HR3288 HART protocol Smart Pressure Transmitter is a high-precision, high-stability, multi-parameter, 4.5 Digit LCD displayed intelligent pressure measurement products which complies with the HART® protocol. Users can use the HART communicators to manage, adjust or monitor process variables when HART instruments running in the process, or use the buttons for on-site configuration ,it's easy to operate. .This product adopts the latest application results of digital technology in the field of sensor manufacturing, and combined with the most advanced designing and manufacturing pressure transmitter technology in the world, precision digital temperature compensation and nonlinear calibration technology, safe and reliable explosion-proof structure and standardized signal output with high accuracy and wide range coverage,its also adapt to the place where fluid pressure is precisely measured. .The product works in a two-wire mode and can be directly replace the simulative two-wire 4mA-20mA DC output transmitter. Digital communication with manual operator. Electromagnetic radiation fits IEC801 standard. Features .4mA~20mA DC current output superposition HART protocol digital communication (two-wire system) . Digital compensation and nonlinear calibration techniques . Digital error correction with local, remote zero and range calibration functions . digital wide temperature compensation in -10 ° C ~ 80 ° .can be operated by buttons to facilitate configuration. .Reverse power protection, over voltage protection . Anti-surge, Anti-electromagnetic interference
Measured Range 4-20 Liquid Level Gauge Transmitter Magnetic Liquid Level Gauge Transmitter, 4mA 20mA Liquid Level Gauge Quick Detailsï¼? Place of Origin Henan, China (Mainland) Brand Name WEILI Model Number ULZ Measuring range 300~6000mm Media weight Level:â?¥0.55g/cm3 Ambient temperature -40~80 Operating temperature -20~120 Work pressure 0.6;1.0;2.5;4.0Mpa measurement accuracy ±1cm(Pillar diameter 1cm) Product Descriptionï¼? UlZ series of magnetic liquid level meter is our factory to introduce advanced foreign technology, according to the principle of buoyancy and magnetic coupling effect developed. According to the relevant standards developed by the level of instrumentation, widely used in petroleum, chemical, pharmaceutical, food and other industries in various towers, cans, tanks, spherical containers and boiler equipment in the medium of liquid level, the level of direction. Main Featuresï¼? 1. Level gauge based on the principle of buoyancy and magnetic coupling developed 2. Coupled with the liquid level alarm, control switch, liquid, boundary of the upper and lower limits alarm, control and chain 3. Coupled with the reed - resistance level transmitter, the level, the boundary signal is converted into 4 ~ 20mADC standard current signal, remote indication, detection, recording control. 4 The product is eye-catching, intuitive readings, measurements are correct, 5 The product is safe and reliable, easy to maintain, from the impact of high and low temperature, the whole process of measurement without blind spots 6 Due to the complete separation of liquid and boundary indicating system from the medium, it is especially suitable for explosive and toxic environments. Technical Parametersï¼? Measuring range 300~6000mm(Increase the range can be customized) Nominal length 300-6000mm Media weight Level:Ï? â?¥0.55g/cm3Interface:Ï?1-Ï?2â?¥0.16g/cm3 Work pressure 0.6;1.0;2.5;4.0Mpa Ambient temperature -40~80 Operating temperature -20~120 measurement accuracy ±1cm(Pillar diameter 1cm) Connection flange size DN20,PN4.0 raised face flange HG20592-97
Wireless Interface RF Modules can be interfaced with R5.0V1 weighing scale PSBs to Make your weighing scale machine wireless .It can Transmit wireless data to a distance of about 100 feet.You can even receive the wireless weight data to your PC for wireless data acquisition .We will provide you free technology support for you to build a complete wireless weighing system .
General Specifications of ZJBOX T10 terrestrial receiver 1.By smart device No Data Sheet, No Internet, No Fee watching TV 3.MPEG-4/H.264 4.One USB 2.0 &DC 5V &AV input 5.PVR,view JPEG 6.support Multi-lingual The function of ZJBOX is connect ZJBOX AV input to different kind set-top box AVoutput that DVB-C,DVB-S2,DVB-T2,IPTV and others .Through ZJBOX into WIFI signal, the TV signals sent to the device,android mobile phone, tablet PC, Also it canlet mobile phone without internet can be seen live on TV shows, it also does not affect the original TV broadcast at the same time, you can watch TV while recording and Screen capture,and by mobile phone search, change channels, adjust the volume, and other functions. Packing : TV BOX T10*1pcs AV cable*1pcs Power adapter*1pcs Manual*1pcs Antenna*1pcs USB convert power cable*1 remote control*1pcs
Carbon Monoxide Detector And Transmitter Model#: F2000TSM-CO-C101 * Real time detect and transmit ambiance carbon monoxide level * Up to more than five years lifetime * 1x analog output for linear measurement * Modbus RS485 interface * The highest performance with the lowest price F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Description F2000TSM-CO-C101 is specifically designed to detect and transmit carbon monoxide level in the enclosed or semi-enclosed car parks and to regulate the environment according to the measurement of carbon monoxide. It is designed for easy installation and minimum maintenance during operation. F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Features * Wall mounting, real time detect CO level with measuring range of 0~100ppm/ 0~200pm/ 0~500ppm. * Electrochemical sensor which offer several advantages over traditional electrochemicalsensors. * With a long life, good long term stability, and high accuracy, the CO sensor is environmentally friendly without risk of electrolyte leakage. * With simple calibration * The special design of easy sensor's replacement makes customers replace sensor easily by themselves * Full time CO level detection, even the slightest leak can be detected * One analog output of the measurement of carbon monoxide concentration with 0~10V/4~20mA selectable * Special built-in Self-Zero Correction algorithm. * Modbus RS-485 communication with 15KV antistatic protection, also can be calibrated carbon monoxide measurement via the interface F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Application * Residential and commercial CO detectors and transmitters * Ventilation control for indoor parking garages * Recreational vehicle CO detectors * Kitchen rooms and restaurants * Freezing machine rooms and other places where air quality is easy to worsen F2000TSM-CO-C101 Carbon Monoxide Detector and Transmitter Specifications * Gas detected: Carbon monoxide * CO Measuring Range: 0~100ppm(default); 0~200ppm/0~500ppm selectable * Response Time: Within 60 seconds * Accuracy:
TCSTX - Menu Driven Loop-Powered Toroidal Conductivity Transmitter with 4-20mA Isolated Output and Local Display TCSTX Toroidal Conductivity Transmitter Features * 4-20mA isolated output, loop powered 16 - 35VDC * Large dual segmented high content display indicates conductivity & process temperature simultaneously * User-adjustable temperature compensation (0 - 4% / deg C) * Four-key menu driven, field selectable ranges * Adjustable zero and span * Nema 4X enclosure with multiple mounting configurations TCSTX Toroidal Conductivity Transmitter Description The model TCSTX is designed for on-line monitoring of water treatment applications and aggressive process chemicals. This four-key menu driven transmitter with local display is ideally suited for applications where 4-20mA signals are required and reliable instrumentation is critical. Key features include: the menu driven field selectable measuring ranges, large dual segment high content display, adjustable temperature compensation (% deg C), isolated output and reversible cell drive. A NEMA 4X (IP66) enclosure provides excellent durability. A variety of mounting choices are available for wall, panel, pipe or rail installation. Pair the TCSTX with a TCS3020 toroidal sensor for troublefree service. TCS3020 sensors are offered in Noryl construction and can be mounted in a custom CPVC flow cell (p/n: FC95C) for in-line use. TCSTX Toroidal Conductivity Transmitter Specifications-Transmitter * Full Scale Range: 0-2000 mS - User selectable * Sensitivity: 0.05% of span or 0.1uS * Repeatability: 0.3% of span, or 0.1uS * Non-Linearity: 0.3% of span or 0.1uS * Operating Temperature: -20 to 60 deg C (-4 to 140 deg F) * Operating Humidity: 0-95% R.H. non-condensing * Power Requirement: 16-35 VDC (2-wire device)
Description: CJBT-I utlizes specific temperature module,can modify kinds of thermocouple,hot resistance, then output standard analog signals.It is high accuracy,strong anti-interference,anti-explosion,heat resistance,anti-knock. Features: Wide measure range All material is Stainless steel Various Pressure port type Protection Grade: IP65 Application: Measure temperature of gas or liquid which is compatible to 316L stainless steel Used in field of petroleum, chemical industry, Metallurgy, Electricity, hydrology etc. Performance Parameters: Measure Range: -551200 Accuracy: ±0.5%typical ±1.0%MAX Long term stability: ±1.0%F.S/year Working temperature: -20~80 Power Supply: 1530VDC Output signals: 420mA 15VDC Pressure Port: M27Ã?2 or customize Shell Material: Stainless Steel 1Cr18Ni9Ti Wire: polythene Protection Grade: IP65
Model: CJBHZ Description: CJBH series liquid level transmitter adopts high precision silicon piezoresistive isolation film oil filling core body as a signal measuring element, according to the mathematical model of the relationship between the pressure and the measured liquid density, liquid level, it measures liquid pressure which is prortional to the depth of liquid level and it Outputs standard signals after signal processing circuit converts.Characteristics of air guide cable, advanced sealing technology, reliable specific amplification circuit and precise temperature compensation technology enables it to be high accuracy, small volume and good anti leak.Long-term immersion in liquid is reliable and stable. Features: Wide measurement range, Protection Grade: IP68 Various output signal Multiple protection Good anti-leakage performance Good anti-electromagnetic interference Application: Measure temperature of gas or liquid which is compatible to 316L stainless steel Used in field of petroleum, chemical industry, Metallurgy, Electricity, hydrology etc. Performance Parameters: Measure Range: 0~1m...~200m Overload: �1.5X rated range Accuracy: ±0.5%(MAX) ±0.25%(Typical) Long term stability: ±0.2%F.S/year (>20mH2O) ±20mm (�20mH2O) Operating temperature range: -20°C~80°C Storage temperature range: -40°C~120°C Power supply: 15~30VDC Output signal: 4�20mA 0�10/20mA 0/1�5VDC Digital output: Utilize HART protocol, realize digital signal transfer and bidirectional communication Shell material: Aluminium casting, 1Cr18Ni9Ti stainless steel Diaphragm Material: 316L O ring: Fluororubber Cable: Polyethylene ventilate cable Insulation resistance: 100MΩ, 100VDC Protection Grade: IP65 Explosion Grade: ExiaIICT6
Model: CJBPZ-I Description: CJBPZ Intelligent Pressure Transmitter is a highly integrated measurement product with high stability.It uses intelligent processing circuit, the most advanced design and manufacturer technology of piezoresistive pressure transmitter, and is available for pressure signal and temperature signal output that in accordance with standard MODBUS-RTU protocol. Featuring integrated design, standard digital output, great compatibility, small size, high accuracy, light weight and wide pressure range, it can be applied in many fields which involve high accuracy required measurement of fluids. Features: RS485 communication interface, Standard MODBUS-RTU Protocol output Netting available Short protection and reverse polarity protection Full stainless steel construction, compact size, light weight Good output consistency and replaceability Available for calibration and parameter change on site through matched soft of upper computer Application: Measure temperature of gas or liquid which is compatible to 316L stainless steel Used in field of petroleum, chemical industry, Metallurgy, Electricity, hydrology etc Performance Parameters: Range: -100kPaâ?¦0kPa~10kPaâ?¦100Mpa (Pressure); 0m~3.5mâ?¦200mH2O (Level) Pressure type: Gauge / Absolute Over pressure: 1.5 times FS / 110MPa (min. value is valid) Accuracy: ±0.5%FS Stability: ±0.3%FS/YEAR Zero thermal drift: ±0.04%FS/â??(â?¤100kPa); ±0.03%FS/â??(ï¼?100kPa) Span thermal drift: ±0.04%FS/â??(â?¤100kPa); ±0.03%FS/â??(ï¼?100kPa) Output: RS485 Interfaceï¼?MODBUS-RTU protocolï¼? Application Temp.: -10â??~60â?? Measurement Error: ±2â?? Storage Temp.: - 40â??~85â?? Power Supply: 9Vï½?28V DC, 15V DC (recommended) Insulation: 100V, 100M Shock: 20g, 25Hz~2000Hz Impact: 100g, 11ms Protection: IP65(B1,B2); IP63(B3); IP68(Level) Electric Connection: Cable or Junction Box Weight: about 160g Housing: S.S. 316L Diaphragm: S.S. 316L O- Ring: Viton Remark: Shrinking range : 1/5 basic range, no range extension. For special temperature requirement, please feel free to contact our company.
Compact structure, beautiful appearance Digital circuit High precision, high stability Strong anti-interference, good long-term stability Small volume, light weight, convenient installation and use Wide measuring range, can measure absolute pressure, gauge pressure Variety choice of processes and electrical connection Suitable for mass production, economic and reliable Measure range: -100KPa~0~10KPa~100Mpa Pressure type: gauge pressure, absolute pressure Power supply: 24VDC, 12VDC Output signal: 4-20mA, 1-5V, 0-5V Temperature compensation: -10~70 Working temperature: -20~85 Storage temperature: -40~125 Zero temperature drift: ±1.5%FS Sensitivity temperature drift: ±1.5%FS Overload: 150%FS Mechanical vibration: 20g(20-5000HZ) Accuracy: ± 0.5%FS ± 0.25%FS Response time: 1ms(Up to 90%FS) Load resistance: (U-15)/0.02Ω Material: Stainless steel case; internal 316L sensor Media compatible: Media compatible with 316L stainless steel Protection grade: IP65
591p/1200/500/0011 591p/1200/690/0011 591p/1700/500/0011 591p/1700/690/0011 590p-drv/0015/500/0011 590p-drv/0035/500/0011 590p-drv/0040/500/0011 590p-drv/0070/500/0011 590p-drv/0110/500/0011 590p-drv/0165/500/0011 591p-drv/0015/500/0011 591p-drv/0035/500/0011 591p-drv/0040/500/0011 591p-drv/0070/500/0011 591p-drv/0110/500/0011 591p-drv/0165/500/0011 590c/0350 590c/0700 590c/1100 590c/1500 590c/1800 590c/2700 590c/3600 590c/4500 590c/7200 590c/8000 option 24 591c/0350 591c/0700 591c/1100 591c/1500 591c/1800 591c/2700 591c/3600
Model numebr ntr-8612, 8613 Brand neton(oem/odm is ok) Encapsulation sfp Function type optical transceiver Data rate up to 1.25gb/s Fiber mode single mode/sm Transmission single fiber bi-directional Wavelength tx 1310nm/rx 1550nm Tx 1550nm/rx 1310nm Distance 20km on 9/125µm smf Connector single sc Average optical output power -10~-3 dbm Extinction ratio >9 db Eye pattern ok Receiver sensitivity -33 dbm Loss of signal deassert -3 dbm Supply voltage 3.3v Supply current 200 ma Operating temperature com. 0~+70? Hot-pluggable yes Digital diagnostic monitoring(ddm) yes Compatible msa/ sff-8472 v9.3 Dimension 63.4*13.3*8.5mm Weight 0.031kg
RF Advantages: LoRa spread spectrum modulation technology, enabling long communication distance and very strong interference immunity Ultra-small size, surface mount design, easy to embed Support multiple modulation modes to facilitate network use Support deep custom designs and other special applications Easy to produce, free of RF debugging Support frequency hopping communication (LoRa mode) Support specified node communication and broadcasting communication modes to facilitate customers to Set up the wireless network Support self cycle reset function Support module firmware upgrading Application: AMR Auto Meter Reading, Network Communication, Remote Control, Mine Monitoring, Industrial Control, etc. Parameter: Frequency: 433/470/868/915MHz (¡¡¡ì¡¨¨ 20MHz Provide for setting) Modulation Mode: LoRa/FSK Output Power: 2~20dBm Sensitivity: -139dBm (Max) Data Rate: 1.2~115.2Kbps(Provide for setting) Tx Current: 130mA (+20dBm) Rx Current: 20mA Standby Current: 2|¡¡ì¬A Frequency Deviation: 10~50kHz Receive Bandwidth: 42~166kHz Interface: 8N1/8E1/8O1 TTL UART(Scalable exteriorRS232\RS485) Communication Distance: > 5000m@LoRa Antenna Impedance: 50|¸ Operation Temperature: -20 to +70 Power Supply Mode: DC4.5~5.5V Module Size: 47X26X10mm Certifications: FCC\ETSI\RoHS Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
Application: Wireless Remote Control Switch, Smart Plug, Wireless Doorbell, Vehicle Anti-Theft Device(RKE), Weather Station, etc. RF Advantages Parameters flexibly configurable and modifiable with software, simple and user-friendly operations High measured sensitivity, narrowband applications, long communication distance Easily passing safety Blocking Test, very good immunity Integrated DutyCycle operating mode, reducing the average operating current, ultra-low power consumption Different frequencies can be set with software without changing the crystal, reducing peripheral components Parameter: Frequency: 300~960MHz (Support software settings) Modulation Mode: OOK/(G)FSK Data Rate: 0.5~30Kbps/0.5~100Kbps(FSK) Sensitivity: -114 dBm(1kbps 0.1%BER) Measured Distance: Product: > 300m, Demo Board: > 1000m Blocking Immunity: SR=1Kbps, ¡¡¡ì¡¨¨ 1/2/10MHz, Offset: 52/74/75db Power Supply: 1.8~3.6V Rx Current: 4.2mA@434MHz; 4.6mA@868MHz Duty-Cycle Rx Mode: Support software settings, Reduce average working current Receiver Start-up Time: DutyCycle: On 12.3ms/off 7.3ms Receiver Wake-up Time: < 1ms Wake On Radio Function: Provide for setting of Preamble, Syncword and other conditional wake-up Crystal: 26MHz+/-20PPM Program Limes: One million times Operation Temperature: -40~+85 Communication Mode: SPI-3Wire Chip Package: QFN-16 IC Size: 3X3X0.75mm Certifications: RoHS\REACH\CE, etc. Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
Application: Remote controller. RF Advantages: Cost-effective solution of SoC Single-Chip Remote Controller Parameters flexibly configurable and modifiable with software, simple and user-friendly operations Maximum power output of 13dBm, adjustable Different frequencies can be set with software without changing the crystal, reducing peripheral components Parameter: Frequency: 240~480MHz(Support software settings) Modulation Mode: OOK Data Rate: 0.5~30Kbps Output Power: -10~+13dBm(Support software settings) Output Power programmable with steps: 1dBm Second Harmonics: 315\434M@+13dBm: -60dBm/-52dBm Third Harmonics: 315\434M@+13dBm: -65dBm/-60dBm Power Supply: 1.8~3.6V Operating Current: 18mA (+10dBm\50% duty cycle\9.6Kbps) Sleep Current: 1|¨¬A Crystal: 26MHz +/-20PPM Crystal Load Capacitance: 12~20PF(Support software settings) PLL Lock MODE: Dynamic lock Program Limes: One million times Operation Temperature: -40~+85 Communication Mode: Tx with MCU Chip Package: SOP-14 IC Size: 8.65X1.6X1.75mm Certifications: RoHS\REACH\CE, etc. Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
Application: AMR Auto Meter Reading, Industrial Control System, Wireless Remote Control Equipment, Mining Safety Monitoring, Smart Home, Smart Security, Internet of Things and Other Wireless Devices, etc. RF Advantages: High output power, very good receiver sensitivity, long communication distance Strong interference resistance to meet wireless certification standards Meet the requirements of mainstream wireless applications, high cost-effective No output power reduction at a supply voltage down to 1.8V Parameter: Frequency: 868/915MHz Modulation Mode: FSK/GFSK/OOK Output Power: 20dBm Sensitivity: -123dBm (1.2kb/s in FSK) Data Rate: 300Kbps (FSK mode) Tx Current: 125mA (+20dBm) Rx Current: 9.3mA Standby Current: 0.1|¨¬A Interface: SPI Communication Distance: > 1000m(1.2kb/s) Antenna Impedance: 50|¸ Operation Temperature: -40~+85 Power Supply Mode: DC1.8~3.7V, 1.8VTransmission power Of power supply will not fall Module Size: 16X16mm Certifications: FCC\ETSI\RoHS Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
Montage MS2437 . CPU: 4000DMIPS . GPU: Dual Core ARM Cortex A7 . Flash: 128MB . DDR: 256MB . 1 x F Type Female 75ohm RF input . 1 x RJ45(100M Ethernet) . 1 x HDMI 1.4 with HDCP1.4 . 1 x Mini AV . 1 x S/PDIF(Optical) . 1 x DC Jack Power Input Accessories are included in the giftbox: . RCU: (standard NEC protocal) . Battey(1.5V AAA) . User Manual . Giftbox . 12V 1A EU type PSU
FUJI FKC Differential pressure transmitter ( FUJI FKC Flow Transmitter FUJI FDC Differential pressure transmitter ( FUJI FDC Flow Transmitter FUJI FKC Flow transmitter ( FUJI FKC FUJI FDC Flow transmitter ( FUJI FDC 1.Product Introduce The Fuji FCX -AIII differential pressure (flow) transmitter accurately measures differential pressure and converts it into an output signal of 4~20mA DC. Fuji transmitter utilizes a unique micromachined capacitance silicon sensor with advanced floating capsule structure and newer micro-processing technology, the transmitter has high accuracy, good stability, safety and reliability, and easy to use. It's small volume, light weight, good environment adaptability, and applicable to all fields. If using the hand held communicator(sold separately), it can be set and display via remote operation, without affecting the DC 4~20mA output signal of transmitter. Fuji FCX-AIII series transmitters with safety funtion have obtained the certificate of SIL certification by T�?V. 2ï¼?Fuji FKC Transmitter Features a. High accuracy Differential pressure (flow) transmitter can be carried out with high accuracy measurement in the range of 0.1 20000kPa. Standard accuracy: ± 0.065% High accuracy(optional) ± 0.05% There's no need to linear calibration when carrying out zero elevation or suppression. b. Excellent environmental adaptaboility The advanced floating cell protects sensor from temperature,static pressure and overpressure effect, and controls the total measurement error of the filed to the minimun. c. Excellent operability and easy to use Built-in RFI filter and lightning arrester Various anti-corrosive materials Built-in local configurator with 3 push buttons d.The transmitter can communicate using FUJI, HART, communication protocol, and also can use FOUNDATION FIELDBUS or PROFIBUS protocol after changing the electronic circuit. 3:Product Specification Measured fluid: Liquid,Gas,or vapour Range, operating pressure, and overrange limit:
NCS-TT105 temperature transmitter is a new generation of smart transmitter with FF Hl, PROFIBUS PA or HART technology. NCS-TT105 transmitter integrates abundant function blocks and realizes not only normal measurement function but also complicated control strategy. NCS-TT105 uses digital technology, so it can connect with many types of thermocouple and thermo resistive sensors. It has wide range and simple interface between field and control room, which reduces the expense of installation, operation and maintenance.