Indoma Industries Pvt. Ltd. revolutionized the desert cooler industry by introducing a technological marvel- Littelpump back in 2002. Due to its numerous advantages, it made the vertical pump obsolete in no time. Littelpump uses PMT technology which ensures long life and relief from calling electrician to change the pump every year.
Material construction of motor Part nameMaterial ShaftSs 431 / ss 410 Bearing bushLeaded tin bronze Thrust bearingS.S. / carbon / teflon Lower/upper housingCast iron Stator shellStainless steel (heavy duty) Material construction of pump Part nameMaterial Impeller/diffuserNoryl gfn 2-701 Bearing bushLeaded tin bronze Pump shaftS.S 202 Suction casing / nrvCast iron Strainer / cable guardStainless steel Operating limits Power range0.5 h.P. To 1.5. H.P. (150 /240 v, 50 hz. Single phase) 0.75 h.P. To 5.0 h.P. (350 /415 v, 50 hz. Ac three phase) Speed2850 rpm Max. Discharge400 lpm Min. Discharge15 lpm Max. Head900 ft. Per stage head20 ft. Special features : Lower power consumption Long durability due to corrosive ss body Special design to withstand wide voltage fluctuations. Excellent performance even at low voltage Special sand guard used to prevent ingress of solids or foreign particles.
Material Construction of Motor Part NameMaterial ShaftSS 431 / SS 410 Bearing BushLeaded Tin Bronze Thrust BearingS.S. / Carbon Lower/Upper HousingCast Iron Stator ShellStainless Steel (Heavy Duty) Material Construction of Pump Part NameMaterial Impeller/DiffuserSS 410 / Cast Iron Bearing BushLeaded Tin Bronze Pump ShaftS.S 202 Suction Casing / NRVCast Iron Strainer / Cable GuardStainless Steel Stage CasingCast Iron Operating Limits Power Range5.0 H.P. (180 /240 V, 50 Hz. AC single phase) 5.0 to 10.0 H.P. (350 /415 V, 50 Hz. AC Three phase) Speed2850 RPM Max. Discharge700 LPM Min. Discharge300 LPM Max. Head275 Ft. Per stage Head33 Ft. Special features : Lower Power Consumption Sand Fighter Model Long durability due to complete SS Motor body With stand with wide voltage fluctuation Specially Designed for high discharge Excellent performance even at low voltage
Material construction of motor Part nameMaterial ShaftSs 431 / ss 410 Bearing bushLeaded tin bronze Thrust bearingS.S. / carbon Lower/upper housingCast iron Stator shellStainless steel (heavy duty) Material construction of pump Part nameMaterial Impeller/diffuserSs 410 / cast iron Bearing bushLeaded tin bronze Pump shaftS.S 202 Suction casing / nrvCast iron Strainer / cable guardStainless steel Stage casingCast iron Operating limits Power range5.0 h.P. To 20.0 h.P. (350 /415 v, 50 hz. Ac three phase) Speed2850 rpm Max. Discharge1250 lpm Min. Discharge50 lpm Max. Head1300 ft. Per stage head(1) 50 ft. For k-type model / 45 ft. For q-type model (2) 35 ft. For k-type model / 30 ft. For q-type model Pecial features : Low power consumption Sand/mud proff design Specially designed ss 304 grade bowl for high head & high discharge
Material Construction of Motor Part NameMaterial ShaftSS 431 / SS 410 Bearing BushLeaded Tin Bronze Thrust BearingS.S. / Carbon Lower/Upper HousingCast Iron Stator ShellStainless Steel (Heavy Duty) Material Construction of Pump Part NameMaterial Impeller/DiffuserSS 410 / S.S. 304 Bearing BushLeaded Tin Bronze Pump ShaftS.S 202 Suction Casing / NRVCast Iron / S.S. Strainer / Cable GuardStainless Steel Stage CasingS.S. 304 Operating Limits Power Range5.0 H.P. to 20.0 H.P. (350 /415 V, 50 Hz. AC Three phase) Speed2850 RPM Max. Discharge1380 LPM Min. Discharge55 LPM Max. Head1200 Ft. Per stage Head50 Ft. for K-type model / 45 ft. for Q-type model Special features : Energy Efficient Models Long durability due to non corrosive SS body Sand/mud proff design Specially Designed SS 304 grade bowl for high head & high discharge Excellent performance even at low voltage
Bore well submersible pumpset:- FOR 3, 4, 6, 8 & 10 Inch Bore Size.
Bore well submersible pumpset:- For 3, 4, 6, 8 & 10 inch bore size.
Tex pump is a pump manufacturer for mining, construction, dredging and also a dredging serivce provider, We also provide refurbished toyo pumps and spare parts for replacement, We care every customer, the satisfaction from customer is always our best gift. Standard export packing.
Mfg: all types s.S. Impeller and submersible pump parts 50 kg per piece
Submersible pumps
Submersible pumps As per product varies
Submersible pump 6" to 12" submersible pump Capacity range: 5-1000m3/h Wooden package
Submersible water pump for water wells, mining, industries 1.5 to 300 HP
Gas lighter, led screen protector ( not even in domestic ), refill paper cups, table runner, earing brass clamp, auto brass electric parts, cashew nuts, wire mesh, petha sweet, niwar, mohini powder, vermicompost, dry bath incubator, test tube plastic, sordium citrate tube, health care product, ornamental freshwater fish, safed musli, used polymer bag, cotton linter, auto hood cover, areca plate, rice.
3 phase 960 rpm electric motor, water pump submersible pump, monoset, block pump.
Flow: 7m3/h Head: 15m Power: 0.75kw Material: cast iron Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries
Flow: 15m3/h Head: 7m Power: 0.75kw Material: cast iron Outlet dia: 65mm Speed: 2900r/min Voltage: 380V Phase: 3 phase/50Hz Color: Yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries
Diesel engines, generating sets, pumping sets, pumps, electric monoblocks, submersible pumps & PVC pipes.
Material construction of motor Part nameMaterial ShaftSs 431 / ss 410 Bearing bushLeaded tin bronze Thrust bearingS.S. / carbon / teflon Lower/upper housingCast iron Stator shellStainless steel (heavy duty) Material construction of pump Part nameMaterial Impeller/diffuserNoryl gfn 2-701 Bearing bushLeaded tin bronze Pump shaftS.S 202 Suction casing / nrvCast iron Strainer / cable guardStainless steel Operating limits Power range0.5 h.P. To 1.5. H.P. (150 /240 v, 50 hz. Single phase) 0.75 h.P. To 5.0 h.P. (350 /415 v, 50 hz. Ac three phase) Speed2850 rpm Max. Discharge400 lpm Min. Discharge15 lpm Max. Head900 ft. Per stage head20 ft. Special features : Lower power consumption Long durability due to corrosive ss body Special design to withstand wide voltage fluctuations. Excellent performance even at low voltage Special sand guard used to prevent ingress of solids or foreign particles.
V3 SUBMERSIBLE PUMPS (ALL RANGES) V4 SUBMERSIBLE PUMPS (ALL RANGES) V6 SUBMERSIBLE PUMPS (ALL RANGES) V8 SUBMERSIBLE PUMPS (ALL RANGES) V10 SUBMERSIBLE PUMPS (ALL RANGES) V12 SUBMERSIBLE PUMPS (ALL RANGES) MINI MONO BLOCKS (ALL RANGES) OPEN WELL (ALL RANGES) MONO BLOCKS (ALL RANGES)
