FDR-3001 Sulfur content of petroleum products tester (lamp method) Scope Standard: ASTM D1266 Sulfur content of petroleum products tester (lamp method) is the People's Republic of China in accordance with the requirements of standard GB/T380 "Determination of sulfur content in petroleum products (lamp method)" under the design and manufacture of this instrument is suitable according to GB/T380 standard The method of measurement prescribed Reid vapor pressure not greater than 600 mm Hg light petroleum products (gasoline and kerosene) of sulfur content. Features 1, glassware easy loading and unloading. 2, the combustion lamp can be adjusted up or down according to need. 3, the gas flow rate of each gas path can be adjusted independently. 4, can be sucked sample gas after combustion, while stirring the test solution from the dual role. Technical Parameters 1 Power supply: AC220V ± 10%; 50Hz. 2, the number of samples: independent five groups, each group can test separately. 3, electromagnetic pump: master electromagnetic pump independent five groups vacuum exhaust volume can be adjusted independently, auxiliary electromagnetic pump (mixing pump) a group. 4, vacuum extraction adjustment: stepless adjustment potentiometer. 5, Enlightening regulation: EEP each group can be independently adjusted up and down to adjust the range of not less than 15 mm. 6, structural materials: countertops and stainless steel tube holder. 7, cuvette holders: each group independently adjustable cuvette holder, adjustable range of not less than 20 mm. 8, the ambient temperature: -10 ~ 40 . 9, relative humidity: 85% 10. Power consumption: less than 150W
FDR-3301 UV fluorescence sulfur analyzer Scope This instrument is a new generation of precision instruments developed in combination with the principle of UV fluorescence measurement and computer technology. It is the most advanced total sulfur analyzer in China. It conforms to ASTM D5453, SH / T 0689 and other standards. The instrument complies with national refined oil Arbitration standard for determination of total sulfur content. It widely used in the determination of crude oil, hydrocarbons and engine fuel, LPG, plastics, petrochemical products, food and so on. The instrument uses the principle of ultraviolet fluorescence measurement, when the sample is introduced into the pyrolysis furnace, the sample undergoes the cracking oxidation reaction, in which the sulfide is quantitatively converted into sulfur dioxide, carried by the carrier gas, the moisture is removed by the membrane dryer, (SO2 *), when the SO2 * return to the steady state of sulfur dioxide emission fluorescence, the release of energy received by the photomultiplier tube, and then amplified by the micro-current amplifier, and then to the SO2 * The amount of sulfur dioxide is proportional to the total sulfur content in the sample, so the total sulfur content in the sample can be determined by measuring the luminous intensity of the sample. Features 1, computer control, it can achieve man-machine dialogue, data and peak shape can be automatically stored and printed. 2, the operating software and LIMIS system can be connected to achieve automatic data transmission. 3, the instrument uses a new quartz cracking tube, which can increase the injection volume, reduce measurement error, improve the sensitivity of the instrument, higher repeatability. 4, cooling fan can automatically turn on and off, so you can save the trouble of waiting for shutdown, saving time and effort. 5, the darkroom system uses the latest technology, the key components of imported detection components to improve the instrument's detection accuracy and sensitivity. 6, the instrument uses imported film dryer to absorb water, eliminating the need to replace the frequent trouble of magnesium perchlorate, while reducing the leakage problem. 7, the instrument uses computer-controlled temperature, improve the accuracy of the instrument temperature control, and difficult to over-temperature. 8, the instrument uses air-cooled instead of water-cooled, saving water resources. 9, the user can retrieve the existing calibration curve, after use the standard sample to calibration it, you can analysis sample. Technical Parameters 1, standards: ASTM D5453, SH/T 0689 and other standards 2, measuring range: 0.2mg / L ~ 10000mg / L ~ percentage 3. Air source: Argon: 99.999%, Oxygen: 99.999% 4, sample status: solid, liquid, gas (with corresponding injector) 5, temperature range: room temperature ~ 1100 ± 3 6, repeatability error: 0.2mg / L X
Sulfur hexafluoride sf6 Specialty gases Cas no.: 2551-62-4 Einecs no.: 219-854-2 Un no.: un1080 Purity: 99.995%-99.999% Dot class: 2.2 Appearance: colorless Grade standard: electronic grade, industrial grade Dielectric medium: Sf6 is used in the electrical industry as a gaseous dielectric medium for high-voltage circuit breakers, switchgear, and other electrical equipment, often replacing oil filled circuit breakers (ocbs) that can contain harmful pcbs. Medical use: Sf6 is used to provide a tamponade or plug of a retinal hole in retinal detachment repair operations in the form of a gas bubble. Tracer compound. As an etchant, as inert gas to fill casting forms, as a filler gas in tennis balls and so on.
Sulfur Hexafluoride SF6 CAS No.: 2551-62-4 EINECS No.: 219-854-2 UN No.: UN1080 Purity: 99.995%-99.999% Dot Class: 2.2 Appearance: Colorless Grade Standard: Electronic Grade, Industrial Grade Dielectric medium: SF6 is used in the electrical industry as a gaseous dielectric medium for high-voltage circuit breakers, switchgear, and other electrical equipment, often replacing oil f illed circuit breakers (OCBs) that can contain harmful PCBs. Medical use: SF6 is used to provide a tamponade or plug of a retinal hole in retinal detachment repair operations in the form of a gas bubble. Tracer compound. as an etchant, as inert gas to fill casting forms, as a filler gas in tennis balls and so on. - -
RD115B Sulfurized Calcium Alkylphenate 1.DESCRIPTION The product has excellent high-temperature detergency and good acid neutralizing ability, better anti-oxidant/anti-corrosion and antiwear performance as well. It possesses good alkali retention and water separation abilities. 2.APPLICATIONS The product is used for blending medium & high quality engine oils. It can reduce deposit formation in the upper part of engine piston. The product is also used for blending marine cylinder oil. 3.THE RECOMMENDED DOSAGE The recommended dosage is from 0.5% to 4.0%. 4. CHARACTERISTICS ITEM TYPICAL VALUE TEST METHOD Flash Point (COC), °C 170 min GB/T 3536 Kinematics Viscosity(100°C), mm2/s Report GB/T 265 Water, wt% 0.30 max GB/T 260 TBN, mg KOH/g 240 min SH/T 0251 Calcium, wt% 8.9 min SH/T 0297 Sulfur, wt% 2.9~3.8 SH/T 0303 5.PACKING AND STORAGE It is packed in 200 liter metal drums. Store in dry, clean and well ventilated warehouses. For the details of health and safety precautions, please see the related Material Safety Data Sheet.
Features 1, the instrument adopts the automatic tube furnace test method, program control tube furnace heating and moving 2, the instrument adopts the super thermal insulation material, is the tube furnace can work under high temperature 3, the instrument adopts the intelligent control system, with temperature setting, time setting and alarm function detection 4, the instrument uses a timing device, the alarm prompt
Scope UV fluorescence sulfur analyzer is based on UV fluorescence measurement principle and the development of computer technology combined with a new generation of precision instruments, is currently the most advanced of the total sulfur content tester, in line with ASTM D5453, SH / T 0689 and other standards, the instrument is National total sulfur content of refined oil arbitration standards. Now widely used in the determination of total sulfur content of crude oil, hydrocarbons and fuel, petroleum, plastics, petrochemicals, food and so on. Measurement principle instrument uses ultraviolet fluorescence method, when the sample is introduced into the pyrolysis furnace, cracking occurred sample oxidation of sulfide which quantitatively converted to sulfur dioxide, carried by a carrier gas, off which the water through a membrane dryer, into the reaction chamber, sulfur dioxide absorbing ultraviolet light energy into an excited state of sulfur dioxide (SO2 *), the fluorescence emission of sulfur dioxide when SO2 * to return to a stable state, the energy released by a photomultiplier tube to receive, and then the micro-current amplifier, computer data processing, the amount of reaction with sulfur dioxide emission intensity is proportional to the amount of sulfur dioxide and total sulfur content in the sample is proportional, so the content of the sample can be determined by measuring total sulfur emission intensity. Features 1, computer-controlled operation, enabling interactive, data, peak shape can be automatically stored print. 2, the operating software can be connected with LIMIS system, automatic data transmission. 3, the instrument uses the new quartz pyrolysis tube, the injection volume can be increased to reduce measurement errors, increase the sensitivity of the instrument, higher repeatability. 4, cooling fans, automatic switch, eliminating the need to wait for the shutdown to finish samples trouble, saving time and effort. 5, darkroom system uses the latest technology, the key components imported detecting element to improve the detection accuracy and sensitivity of the instrument. 6, equipment imported membrane dryer to absorb , eliminating the need to frequently replace magnesium perchlorate of trouble, while reducing the leakage problem. 7, using computer control of temperature, improve the instrument precision temperature control, and difficult to over-temperature. 8, using air instead of water cooling, saving water resources. 9, can be adjusted to take existing calibration curve calibrated using a standard sample after sample analysis. Technical Parameters 1, in line with standards: ASTM D5453, SH / T 0689 and other standards 2, measuring range: 0.2mg / L ~ 10000mg / L ~ percentage 3. Air source: Argon: 99.999% Oxygen: 99.999% 4, sample status: solid, liquid, gas (with corresponding injector) 5, temperature range: room temperature ~ 1100 ? ± 3 ? 6, repeatability error: 0.2mg / L=X
ULTRA LOW SULFUR Quantity: Minimum 10,000 MT Trial Shipment Maximun 500,000 MT Monthly
1. Sulfur technical granulated 99.98% with quality certificates, in big runs. 2. Delivery in the amount of 3,000 tons in month. 3. Origin: Kazakhstan
Sulfur hexafluoride (SF6) or sulphur hexafluoride is a synthetic fluorinated compound with an extremely stable molecular structure. UN 1080 CAS 2551-62-4 MF F6S Melting point� â??50� �°C(lit.) Boiling point� â??64� �°C1� mm Hg(lit.) density� 6.602 NANJING ZL ENERGY CO.,LTD. specialize in Isobutane R600a, Propylene, Ethane, Cyclopentane, 1-hexene and Isooctane, etc. We look forward to your inquiry if any needs.
Insoluble sulfur HS OT20 / Insoluble sulfur OT20 / Insoluble sulfur HD OT20 / Insoluble sulfur IS7020 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Insoluble sulfur OT33 / Insoluble sulfur IS6033 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 66.0-68.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 32.0-34.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150�¼m) % max.: 0.30
Sulfur Granule/Powder etc.
Insoluble sulfur IS7020 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Insoluble sulfur OT20 / Insoluble sulfur HD OT20 / Insoluble sulfur HS OT20 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Insoluble sulfur OT20 / Insoluble sulfur HD OT20 / Insoluble sulfur HS OT20 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Sulfur 99.98% +/- 0.008 Specifications 1- Shape: Granulated and Ground Sulfur 2. Purity min.99.98%. +/- 0.008 3. Origin: Uzbekistan. 4. Color: Yellow /Yellow Bright. 5. Price $50 for mt Mark Krupovlyanskiy MMK,Inc Email: mmk91335@Gmail.com Phone: +1(818)3786718 https://www.mmktrade.com/commodities
Barcode: 6253008707288 SKU Internal Code: 7288 Size: 150g Product Description: A unique formula of vegetable oils carefully blended with sulfur helps to control the sebum secretions of the skin. Removes dirt, impurities, and dead skin cells that may cause the appearance of pimples and acne. Cleans pores deeply, provides the skin with the necessary elements, and makes the skin healthier and smoother. Rejuvenates the skin again by rebalancing the skin's natural moisture leaving the skin active and radiant. Used daily to clean hands, face, and body in general It is recommended to apply moisturizer after use. Usage Directions: Rinse your face and body with warm water, rub with soap for a while and rinse again. Used daily to clean hands, face, and body in general. Avoid contact with eyes. For external use only. Ingredients / Composition Products: Products contain Dead Sea minerals and salts such as potassium, magnesium and many other minerals that help to regenerate and rebuild the skin naturally. They also contribute to resisting wrinkles and gently ridding the skin of excess oils, moisturizing the skin and ridding it of roughness. We use pure vegetable oils in the manufacture of all our products and glycerin is added as a humectant in all types of soap. Precaution: Used daily to clean hands, face, and body in general Avoid contact with eyes For external use only
The Low shrinkage oil is a distillate fuel manufactured from a selected crude oil; this Diesel Fuel contains 10 parts per million of sulfur (
sulfuric acid 98% belongs to Class 8 dangerous goods UN1830 HS 2807000010 CAS: 7664-93-9 A 20' FCL contains 16 IBC barrels, one IBC barrel contains 1.6875 tons of sulfuric acid, and a 20' FCL contains 27 tons of sulfuric acid. The size of IBC barrels is 1200*1000*1160mm, and the weight of each IBC barrel is 57kg