R290 or propane gas currently stands out for its wide range of applications in both the commercial and industrial fields. This gas has practically unbeatable properties in any of its applications, due to its GWP (Global Warming Potential) = 3 and an ODP (Ozone Depletion Potential) = 0. However, on the other hand, being a class A3 refrigerant, it is a non-toxic, but extremely flammable refrigerant. R290 has similar thermodynamic properties to R22, although certain characteristics such as capacity and working pressures are lower. Even so, it has excellent therm-physical properties and its thermal efficiency is good for most conditions, including high ambient temperatures, where the discharge temperature is low. Advantages â?¢ Natural, environmentally friendly and efficient refrigerant. R290 or propane gas is a natural refrigerant and has a low cost due to its abundance. In addition, it has high energy efficiency, thanks to its thermodynamic properties and high performance, which will lead to cost reduction. Climate adaptability. R290 gas has been shown to be better adapted to hot climates than HFCs. Performance. Their smaller displacement compressors further increase efficiency in industrial equipment, while also delivering high performance in commercial applications. Wide range of application. R290 refrigerant is fully suitable for both commercial and industrial equipment and systems. Good compatibility with other components. Reduced charge of R290 refrigerant. Obtaining a higher efficiency and performance than other refrigerants with only 40% charge. Long-term solution free of fluorinated refrigerants. This natural refrigerant is a safe bet for the long term, as it has no future environmental restrictions and is free of refrigerant taxation. Applications: â?¢ Commercial Refrigeration Systems. â?¢ Industrial Refrigeration Systems. Chiller Systems. Chill Cabinetry. Vending. Cold Storage. AC Systems. Heating Pumps.
Biesse Part No.: 1705A0123 1705A0123 tool holder clips Biesse tool holder (white fork) HSK F63 Biesse HSK 63F tool clips Biesse Rover tool holders Biesse CNC tool gripper HSK63F Biesse HSK 63F plastic tool fork Biesse tool collet HSK F63 1705A0123 HSK F63 Tool Holder Clips for Biesse Rover CNC This Biesse 1705A0123 spare part is the consumable of Biesse Rover CNC. HSK 63F tool fork is for the HSK63F tool holder clamping, used with carousel or side loading tool changer. HSK63F Tool Holder Forks Specifications: 1. Made in China, famous brand 2. Imported USA Dupont white plastic material, high quality, reinforced and anti-explosion. 3. The tool holder clips are resistant to the temperature changes and maintain very precise clutch tolerance. 4. Alloy steel block casting inside, reinforced structure, has high loading capacity, also with steel positioning pins. 4. Dynamic balance grade: G2.5, 30000rpm 5. Yaw precision: 0.005mm 6. Loading capacity: 8-10kgs 7. Last more than 60,000 times tool changing cycles. We have tested. 8. The same material as Italy fork used. The outlook is up to 95% same as Italy made. Lifetime can up to more than 90% of Italy made. 1705A0123 HSK63 plastic grippers are available in stock for quick delivery. Molded plastic with metal insert for rigidity and locking pin for aggregates also are available here. Beside used on Biesse Rover CNC machines, these tool changer grippers are also widely used on CNT Motion, CR Onsrud, DMS, Flexicam, Multicam, Northwood, Techno, Laguna, Thermwood, Bulleri, ITALMAC Zeus, KDT, Masterwood auto tool changer CNC router machines. They are an exact interchange tool holder gripper.
Dear Manager, I hope this email finds you well. I am reaching out to you with an exciting opportunity to elevate your business with premium home textiles. As an esteemed importer of home textiles in Europe, I believe you will appreciate the exceptional quality and design of our products. At Master fabrics, we specialise in manufacturing exquisite bed sheets, bed sets, duvet Covers , fitted sheets comforter Set and Pillow covers. Our products are crafted using the finest materials, ensuring unparalleled comfort and durability. By partnering with us, you will gain access to a diverse range of stylish and contemporary home textile options that cater to the discerning tastes of European consumers. Here are some key reasons why choosing MasterFabrics for your home textile needs will be mutually beneficial: 1. Superior Quality: Our products undergo rigorous quality control measures, ensuring that each piece meets the highest industry standards. 2. Competitive Pricing: We offer competitive wholesale prices, allowing you to maximize your profit margins without compromising on Quality. 3. Customization Options: We understand that customisation is essential for maintaining a unique brand identity. I invite you to browse our comprehensive catalog of home textiles at www.themasterfabric.com to get a glimpse of our exceptional range. Looking forward to hearing from you soon. Warm regards, Saim Bashir Managing Director themasterfabric.com +92-305-6294548
Emergency Double Tube Vapor Tight LED Linear Light Bridge Wiring No-corrosion LED Batten Lighting Fixture This double tube linear fixture adopts SMD2835 chips, can achieve higher lumen out put. The tubes of this led linear fixture adopts bridge wiring design, no need to consider the power direction of the tube. It's easy for installation of the Linear LED Light Fixture. Besides, the huge terminal of the linear fixture is easy for wiring. This vapor tight luminaire adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof. It widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements. Lamp Luminous Efficiency(lm/w): 130 Warranty(Year): 3-Year Type : LED triproof light Application: Office, Warehouse, Garage, Factory Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-PTBLP44-5FT-CE Color Temperature(CCT) : 5000K (Daylight) Input Voltage(V): AC 110 or 230V( �± 10%) Color Rendering Index(Ra): 80 Support Dimmer: NO Lifespan (hours): 50000 Working Time (hours): 50000 Length: 5ft IP Rate: IP 65 Beam angle: 120 Degree Material: PC + PC Wattage: 2*22w
Standard ISO,DIN,JIS,ANSI,BSW,GB and non-standard fastener according to customers' drawing Machines Auto pressing machines, automatic heading machine,CNC machines, cold header high-precision surface grinder machine, involantary grinder machines,Hardness tester, Electrolytic metrical thickness gauge, Vision Measuring Machine,Thickness Gauge and so on Material 1.Stainless Steel: SS201, SS303, SS304, SS316, SS410, SS420 and So on 2.Steel: Carbon Steel,Alloy Steel,Spring Steel and So on 3.Brass:C36000, C37700 (HPb59), C38500(HPb58),C27200(CuZn37), C28000(CuZn40),Copper (99% Cu) and so on 4.Free Cutting Steel:1213, 12L14,1215 and so on 5.Aluminum: Al6061, Al6063 etc 6. Other material,like nylon and plastic and so on. Surface Finishing Zn- Plated,Ni-plated,Passivated,Tin-plated,Sandblast and Anodized, Polish,Electro Painting,Black Anodize,Plain,Chrome plated,Hot Deep Galvanize(H. D. G.) ,Brass Plating,Black Oxide etc. Heat Treatment Tempering,Hardening,Spheroidizing,Stress Relieving. Manufacture Process Heading/Machining/Threading/heat treatment/plating/Baking/QA/Package/Shipping Sample We can supply the samples for free,if the samples we have in stock Lead time 7-15 working days as usual,It will based on the detailed order quantity. Carton size 36*24*16 CM &36*24*12 CM and according to customer request design Pallet size Standard Euro Pallet 110*80*90 CM After-sale service we will follow up goods for every customer and help solve problem after sales.
Place of origin : Gorontalo-Indonesia Storage type : Coolstorage Specifications : Frozen Fish Shelf life : 1 Years Producer : PT. Mohutato Aily Nusantara Composition : Fresh Fish Type of preparation : Smoked Dried Fish Additives : No Freezing process : IQF Max. humidity : 10% Part : Entire Ph value : 7 Preservation process : Water Size : 10-50 cm Style : Dried, frozen Features : Organic, Vitamins, Natural, Nutritious Product name : Smoked Dried Fish Product Type : Fish MOQ : 1*20FCL Processing : Smoked Color : Light Brown Packing : Vacuum Plastic - Carton Box Packing : 10kg/pack/box Production capability : 15,000kg/month Payment Term : 50% Advance TT-50% L/C irrevocable at sigh (in the case of 100% prepayment, the price will be cheaper) PROCESS PRODUCTION : Process (fresh fish are cleaned from dirt, then the fish are sorted based on the size and weight of the fish, after that the fish are separated from the head, split in two depending by requested, then after the fish are cleaned, the fish are arranged neatly in a smoking place with a temperature of approximately 70-100�°C with time Smoking is divided into 3 sessions, namely (drying, heating and smoking sessions). The total time required for this process is 4-6 hours. After the fish has been smoked, the fish is then put into the cooling room for a duration of 2 hours, then the fish is placed under to the packaging place and put into coldstorage with temperature (18C). This is done to maintain the durability of the smoked fish.
truSculpt iD provides an innovative RF technology that delivers clinically proven results to expand your body sculpting business. The system versatility allows for customized treatments to treat the abdomen and flanks simultaneously based on patients need in as little as one 15-minute treatment protocol. TruSculpt ID by Cutera is an innovative fat-reducing technology that helps individuals achieve their desired body shape. By using cutting edge advanced radiofrequency energy ID eliminates fat cells in different targeted areas of the body simultaneously. The abdomen, thighs, flanks, and arms can all be treated in one single treatment. Afterwards stubborn pockets of fat should be removed and your body should have a more contoured and toned appearance. TruSculpt iD is the latest body sculpting technology giving you a personalized, hands-free and hand-held solution to revolutionize your practice. This powerful, non-invasive, Monopolar RF platform tailors to patients individual needs and features Real-Time Temperature Control for clinically proven results, safety, and patient experience. truSculpt�® iD treats the entire fat layer, resulting in a 24% fat thickness reduction. It offers unique handpiece and placement location versatility and customized 15-minute protocols to treat a full abdomen or multiple body areas simultaneously. Average 24% fat reduction Clinically proven results for permanent fat cell destruction Real-Time Temperature Control for consistent results Fast 15-minute treatment protocols Hands-free & hand-held flexibility Enhanced safety High patient satisfaction Multiple body areas treated simultaneously Patient & treatment versatility Customized treatment protocols 2020 Cutera Trusculpt iD Monopolar RF Body Contouring; Pristine Cosmetic and Operating Condition, Lightly Used for a Total of 3 Treatments Only, Single Owner; Reason For Selling: Downsizing; Also Includes: (6) 40cm2 HFree Handpiece (Hands-Free Handpiece, for Abdomen & Flanks), (1) 40cm2 HHeld (Hand-Held Handpiece, for Personalized Body Treatment), (1) 16cm2 Handpiece (Hand-Held Handpiece, for Personalized Face Treatment), (2) Keys, Operators Manual.
The first clinically proven laser device for onychomycosis, or nail fungus. PinPointe FootLaser is turning feet that suffer from unsightly nail fungus into happy feet for men and women the world over. Indicated for use for the temporary increase of clear nail in patients with onychomycosis. e.g., dermatophytes Trichophyton rubrum and T. mentagrophytes, and/or yeasts Candida albicans, etc. NuvoLase Inc., a privately-held medical device company located in Chico, California and manufacturer of the PinPointeâ?¢ FootLaserâ?¢, announced today their organization has received their ISO 13485 certification for its Quality Management System. NuvoLaseâ??s scope of registration includes design, development, production, installation and service. The PinPointe FootLaser was the first light-based device to receive FDA clearance specific to onychomycosis, commonly known as nail fungus. With almost 100,000 procedures performed worldwide with the PinPointe FootLaser, the FootLaser remains one of the only devices on the market today with documented clinically proven efficacy. 2012 NuvoLase PinPointe Foot Laser â?? for the Removal of Toe Nail Fungus; Manufactured 06/2012; Excellent Cosmetic and Perfect Operating Condition, Single Owner; Reason for Selling: No Longer Providing Laser Services; Includes: Laser Fiber Handpiece, Key, Footswitch, Operator Manual. Product Specifications: Wavelength: 1064 nm, Nd Yag Pulse Energy: 200 Millijoules (Max) Pulse Width: 100 Microseconds Repetition Rate: 30 Hertz Max Preset Select: 3 fixed settings Delivery: Fiber Laser Classification: Class IIIb Wavelength: 630 to 680 nanometers Power: Less than 1.0 milliwatt Time Set:1-90 seconds AC Power: 120 V~, 60 Hz, 8 A Size: 32 in H x 13 in W x 14 in D Weight: 38 lb, 17.2 kg
2023 MODEL TOYOTA RAIZE 1.0L TURBO AUTOMATIC TRANSMISSION ENGINE: 1.0L TURBO, 3-CYLINDERS- EURO 4 MAX OUTPUT: 97 HP MAX TORQUE: 140 N.M / 2400-4000 RPM CONTINUOUSLY VARIABLE TRANSMISSION (CVT) FRONT WHEEL DRIVE (FWD) FUEL TANK CAPACITY: 36L DIMENSIONS L - W - H (MM): 4030 - 1710 - 1635 5 PASSENGERS (INCLUDING DRIVER) EXTERIOR FEATURES 17 INCH ALLOY WHEEL TIRES SIZE: 205/60R17 LED HEAD LIGHTS LED DAYTIME RUNNING LIGHT (DRL) LED REAR LAMPS KEYLESS ENTRY "REMOTE CONTROL" POWER SIDE MIRRORS WITH TURN SIGNAL LAMP REAR SPOILER COLORED DOOR HANDLE FRONT & REAR BUMPER â?? MONO TONE AND TWO TONES REAR WINDOW WIPER HIGH MOUNT STOP LAMP â?? LED INTERIOR FEATURES FABRIC SEATS REAR WINDOW DEFOGGER DRIVER SEAT VERTICAL ADJUSTER MANUAL AIR CONDITIONING LIGHT CONTROL SYSTEM 4 SPOKE LEATHER STEERING WHEEL, SHIFT LEVER & ARM REST STEERING WHEEL CONTROLS POWER WINDOW ALL DOORS (AUTOMATIC DRIVER ONLY) SUN VISORS WITH VANITY MIRRORS INSIDE REAR VIEW MIRROR DISPLAY AUDIO USB PORT 4 SPEAKERS SAFETY & CONVENIENCE FEATURES DRIVE MODE SELECT (PWR) AIRBAGS (DRIVER & FRONT PASSENGER) HILL-START ASSIST CONTROL (HAC) ANTI-LOCK BRAKE SYSTEM (ABS) VEHICLE STABILITY CONTROL (VSC) TIRE PRESSURE WARNING SYSTEM (TPWS) ENGINE IMMOBILIZER SYSTEM CHILD PROTECTOR REAR FOG LAMP
Product: Palm Kernel Expeller First of all, we would like to take this opportunity to introduce ourselves to your esteem company that we are exporters in Indonesia various� types of Palm Kernel Expeller. CV.SIBURUI NAIK DAUN was established in the year of 2020. Our company carries wide product ranges that cater to manufacturers, wholesalers & export to overseas. We may offer various type of Palm Kernel Expeller from different origin of archipelago Indonesia,in small and big quantity which is packed in bulk packing to fulfill your requirement � Our Palm Kernel Expeller  specsifications are: Protein Content : 14.59% (Standart : GAFTA 130 4:1) Fat Content : 9.70% (Standart : GAFTA 130 2:1) Moisture Content max : 4.86% (Standart : GAFTA 130 3:0) Raw Fiber : 16.38% (Standart : ASTM D 3174-12) Ash Content : 3.72% (Standart : GAFTA 130 9:0) Sand/Sillica : 0.79% (Standart : GAFTA 130 13:0) Salmonella : Negative (SNI 2897-2008) MOQ : 20 Tons Single origin from: 1. Borneo Island, Indonesia Delivery Time: 30 - 60 Days After Receive Payment Port of Loading : Surabaya Port, Indonesia Price FOB Surabaya Port : $350.00 (Negotiable) Please Do not hesitate to contact us if you interested in any of the above commodities and we shall serve you promptly and respectively.
Pneumatic Sanitary Ball Valve Overview: Pneumatic sanitary ball valve (quick-installation ball valve) is a sanitary valve that meets high-standard manufacturing standards. It is usually connected to the pipeline by a card box and quick-installation method. It can be more convenient for dry disassembly, maintenance and cleaning. Pneumatic sanitary ball valves are made of SUS304 and 318L stainless steel materials. The inner and outer surfaces have been polished and sterilized, and have undergone precise inspection procedures and strict quality management. They can meet the needs of wine, food, biopharmaceutical and other industries. special requirements. The pneumatic sanitary ball valve adopts the all-inclusive F4 seal, which is easy to clean without any dead ends, and has no individual accumulation area. It is completely clean and meets the standards of food hygiene. Pneumatic Sanitary Ball Valve Features: 1. The pore size of the pneumatic quick-loading ball valve is consistent with that of the pipeline, and the surface is smooth without dead ends, and no sediment will be generated; 2. The inner wall of the flow channel is polished and sterilized to fully meet the sanitary standard; 3. Pneumatic sanitary ball valve adopts all-inclusive fluorine-lined (PTFE) sealing form, there is no dead angle and easy to clean: 4. Pneumatic quick-loading ball valves are all made of stainless steel, and the inner wall of the flow channel is 0.5um electronically polished to keep the fluid unimpeded. Application of Pneumatic Sanitary Ball Valve: Pneumatic sanitary ball valves are equipped with solenoid valves, travel switches and other related accessories, which can be used for remote automatic control, and can also be equipped with valve positioners to input 4-20mA signals according to the needs of working conditions, so as to adjust the quality of the pipeline, and the pneumatic hygiene The inner wall of the ball valve is long and smooth, no dead angle, seamless, automatic exhaust and other channels, and it is also very suitable for the needs of cleaning in place. It is widely used in food, sour wine, beverages, dairy products, fine chemical pharmaceuticals and biological engineering, etc. Many industries.
Explosion-proof electric ball valve overview: The electric explosion-proof ball valve is mainly composed of an explosion-proof actuator and a ball valve. It is an electric explosion-proof valve used in flammable and explosive conditions. The electrical components on the explosion-proof electric ball valve are required to be fire-proof and anti-static, and all meet the explosion-proof standards. The explosion-proof grade is ExdIIBT4 (CT6), and the protection grade is IP87. The electric explosion-proof ball valve can control the valve switch by inputting the relevant power signal, and can control the operation of the ball valve by inputting the 4-20mA signal and 220/power supply for proportional adjustment, so as to achieve the automatic control of the medium flow, pressure, temperature and other parameters in the pipeline. Applied to explosion-proof occasions such as natural gas, sewage, gas, coal mine, chemical industry, etc. EXDIICT4 grade explosion-proof electric ball valve Explosion-proof electric ball valve features: Explosion-proof Shendong modified valve means that the curved heat actuator of the ball valve h meets the explosion-proof standard. It is used in places requiring explosion-proof, such as liquid or gas (inflammable and explosive places in the chemical industry, used to open and close the valve. Or section, explosion-proof valves can be divided into intrinsically safe type and explosion-proof type. The intrinsically safe type uses a DC motor, and the explosion-proof type uses an AC motor. control, and can also be operated on site. Electric explosion-proof ball valve standard specification: 1. Design and manufacture: GB12237-89, API608, API 6D, JPI7S-48, BS5351, DIN3357. 2. Flange size: JB/T74~90 (JB74~90), GB9112~9131, HGJ44~76, SH3406, ANSI B16.5, JIS B2212~2214, NF E29-211, DIN2543. 3. Structure length: GB12221-89, ANSI B16.10, JIS B2002, NF E29-305, DIN3202. 4. Inspection main test: JB/T9092, API598.
LED Tube Linear LED Light Fixture with Small Fixed Separate Plate This� Linear LED Light Fixture designed with small fixed separate plate, and the small fixed separate plate designed with huge terminal block. It can make wiring more easier, and the small fixed� separate plate of this� LED Linear Fixture� allows for quick sliding installation, greatly reducing installation time. The tubes of this� linear light fitting has bridge wiring design in fitting, no need consider power direction of tubes, and it's more safety for installater. This linear luminaire designed with emergency function, it has� single tube emergency or double tubes emergency� option. Lamp Luminous Efficiency(lm/w): 120 IP Rating: IP20 Warranty(Year): 3-Year Place of Origin: Guangdong, China Color Temperature(CCT): 5000K Color Rendering Index(Ra): 83 Support Dimmer: NO Emergency Function: Yes Lifespan (hours): 50000 Working Time (hours): 50000 Lighting solutions service: Lighting and circuitry design, DIALux evo layout, auto CAD layout Light Source: LED CRI (Ra>): 83 Model Number: ZL-PTBLP18-4FT-CE Brand Name: comled Input Voltage(V): AC100-277V Working Lifetime(Hour): 50000 Lamp Luminous Flux(lm): 2340 Length: 4ft Application: Warehouse Material: Iron+PC
Cacao powder provides vitality, antioxidants and is a dietary fiber rich in protein, carbohydrates and healthy fats, therefore it is an excellent source of energy and also an excellent source of minerals such as magnesium, iron, copper and calcium. Do you want to know more about this superfood? Continue reading! Cacao powder benefits 1. Antioxidant Cacao powder contains more than 30 antioxidant substances such as flavonoids (quercetin, rutin, and catechin), acids (caffeic acid, vitamin C or ascorbic acid, ferulic acid), caffeine, vitexin, etc. All these components make it one of the most antioxidant foods that exists protecting the cell from naturally aging damage, but the cell can also be damaged by triggering tumor processes. 2. Stimulant Cacao contains stimulant alkaloids similar to coffee or tea. For example, theobromine stimulates the nervous system although it has less concentration than coffee. Thatâ??s why cacao drinks are used for breakfast 3. Euphoriant Cacao contains phenylethylamine which produces euphoria and well-being. It has a similar effect to amphetamines. That is why it has always been said that chocolate is an antidepressant since its consumption makes you feel some happiness. 4. Remineralizing Its contribution of minerals prevents anemia, strengthens the immune system, memory, and muscles and bones. 5. Cosmetics It is used in massages, hygiene products, anti-aging, anti-cellulite creams, and treatment of spots on the skin. There are homemade recipes to prepare masks and other cosmetics with cacao powder. Available for Export Supply. (Presentation 20kg Boxes) Directly to your door or nearest port/airport.
Product: Palm Kernel Expeller First of all, we would like to take this opportunity to introduce ourselves to your esteem company that we are exporters in Indonesia various  types of Palm Kernel Expeller. CV.SIBURUI NAIK DAUN was established in the year of 2020. Our company carries wide product ranges that cater to manufacturers, wholesalers & export to overseas. We may offer various type of Palm Kernel Expeller from different origin of archipelago Indonesia,in small and big quantity which is packed in bulk packing to ful fill your requirement Our Palm Kernel Expeller� � specsifications are: Protein Conten : 18.20% (Methods : SNI 7856 : 2013) Fat Content : 6.26% (Methods : SNI 7856 : 2013) Moisture Content max : 3.96% (Methods : SNI 7856 : 2013) Raw Fiber : 17.29% (Methods : SNI 01-2891-1992) Ash Content : 6.10% (Methods : SNI 7856 : 2013) Profat (Protein+Fat) : 24.46% (Methods : Calculation) Calorie : 321.9 Kcal/100g (Methods : Calculation) Aflatoxin B1 : Below 1.0 ug/kg (LCMSMS) MOQ : 20 Tons Single origin from: 1.  Borneo Island : Kutai Kartanegara, East Borneo Delivery Time: 3 weeks after receive payment Port of Loading : Surabaya Port Price FOB Surabaya Port : USD  350,00 - / Tons  valid price until 25 September 2023. Please Do not hesitate to contact us if you interested in any of the above commodities and we shall serve you promptly and respectively. Thanks and looking forward to establish a brand new business relationship with your esteem company in a near future. Tommy Septanus Christian, S.Sos
1. Appearance: Stanley plums are medium to large in size and have an oval or egg-like shape. They are typically deep purple or dark blue-black in color, with a slightly dusty or powdery appearance on the skin. The skin is smooth and thin, and it may have a slight bluish tint. The flesh inside is yellow-green. 2. Texture: The flesh of Stanley plums is firm and dense, making them excellent for various culinary uses. When fully ripe, they can have a slightly grainy texture near the pit. 3. Flavor: Stanley plums are prized for their sweet and tart flavor profile. They are known for being rich, with a distinct and robust plum taste. The tartness provides a pleasant contrast to the sweetness, making them a popular choice for both eating fresh and for cooking. 4. Pit: Stanley plums have a clingstone pit, which means the flesh adheres tightly to the pit, making them a bit challenging to pit for certain culinary applications. 5. Uses: These plums are highly versatile in the kitchen. They are commonly used for making jams, jellies, preserves, and compotes due to their rich flavor and high pectin content. Stanley plums also make excellent additions to pies, tarts, and other baked goods. They can be dried into prunes, or simply enjoyed fresh as a snack. Stanley plums are cherished for their robust flavor, making them a favorite among plum enthusiasts and home cooks. Whether eaten fresh, used in cooking, or turned into delicious preserves, Stanley plums are a versatile and delightful fruit.
Streamline your sportswear experience with these versatile long shorts. Say goodbye to unnecessary hassle simply slip into these shorts and dive into running, swimming, weight-lifting, or any spontaneous activity that comes to mind. You can trust these shorts to rise to the occasion! Crafted from 91% recycled polyester and 9% spandex, the fabric composition, with slight potential variation of up to 3%, assures both comfort and flexibility. Weighing approximately 5.13 oz. /yd. (174 g/m ), the fabric strikes the ideal balance between lightweight and durable. Embrace the freedom of movement granted by the four-way stretch moisture-wicking microfiber fabric. Stay cool and comfortable with the breathable, fast-drying material. Shield yourself from the sun's rays with UPF50+ protection, ensuring safety under the sun. Designed with a 6.5 (16.5 cm) inseam, these shorts offer optimal coverage without sacrificing mobility. The elastic waistband, paired with a flat white drawstring, guarantees a secure fit that complements your shape. Carry your essentials with ease using the convenient mesh side pockets. Enjoy unrestricted movement and functionality with these long shorts that cater to your dynamic lifestyle. Choose the perfect fit from sizes ranging from 2xs to 6xl. Shipping within 10 days, and payment terms include LC and TT. Elevate your activewear game and seize the day with confidence get your pair today!
44.MODEL:DL- BTST Textile Sweater Button Push Adhesion Pull Tensile Strength Button Push & Pull Tensile Strength button tensile strength dynamometer Standard configuration: 1. Tension seat 2. Pushing and pulling force gauge 3. Two jaw pliers 4. Three jaw pliers 5. Tension pliers 6. Bottom fabric fixture 7. Male button fixture 8. Mother button clamp Size: 280 * 220 * 777mm Button tensile testing machine Button strength machine: The purpose of this test is to define the responsibility of garment manufacturers to ensure that buttons, buttons, and fasteners are properly secured to the garment, preventing buttons from detaching from the garment and posing a risk of swallowing by infants. Therefore, all buttons, buttons, and fasteners on ready-made clothing must be tested by a button strength tester. This function performs uniform and vertical tensile testing on various buttons on clothing to check whether their firmness meets relevant safety standards Standard: 16CFR1500.51-53, ASTM PS79-96 Operating instructions: 1. Install the fixture, cooperate with the test button, and lock the test sample onto the base tightly 2. Put down the fixture, grip the buttons tightly and pull them upwards. Each group of buttons should be able to withstand a minimum of 17 pounds of tension (7.72kg) and maintain it for 10 seconds without any signs of looseness or damage. At least 20 buttons per model need to be tested simultaneously to be considered qualified If one of the buttons is loose or damaged, or if it is replaced, it is necessary to retest all of them
Hoang Minh Chau Company(Address : Tan Hung, Chi Tan, Khoai Chau, Hung Yen) has nearly 20 years of experience in the cultivation and production of turmeric . The company specializes in official export to the most demanding markets in the world such as: Japan, Italy, Germany, USA, India, Eastern Europe... The biggest advantage is being located in the largest turmeric raw material area of Vietnam. ï?¶ The turmeric raw material area of Hoang Minh Chau Co., Ltd., which is protected by the State, has been implementing the process of growing and developing turmeric according to GlobalGAP standards in order to improve the productivity of turmeric, open many export markets to the world. WHY SHOULD YOU CHOOSE TO BUY TURMERIC PRODUCTS OF HOANG MINH CHAU COMPANY : 1. TURMERIC IS GROW AND STRICTLY CONTROLLED: Keep a farming diary on each turmeric field ð??? Only use standard varieties and benign microbial organic fertilizers ð??? No residue of pesticides ð??? Have clear product traceability 2. SPECIFICATION *ITEM* *STANDARD* 1>Type : Turmeric powder 2>Origin : Hung Yen, Viet Nam 3>Brand Name : Hoang Minh Chau Co., Ltd 4>Color : Orange yellow 5>Features : Delicious, nutritious, healthy 6>Curcumin : Over 5 - 6 % 7>Application : Health Food, food additive, medicine, cosmetic 8>E-coli : Absent 9>Salmonella : Absent 10>Certificate : GlobalGAP, ISO 22000:2005(United Kingdom), four-star OCOP... 11>Supply Ability : Over 50 Tons per Month 12>Packing : PE + carton 10kg, 15kg; PE + PP 20kg, 25kg,...or according to customer's request. 13>Labelling : In accordance with the rules and regulations applying to buying country 14>Shelf Life : 24 Months 15>Storage : In cool and dry places. We wish to become a supplier of high quality products with competitive prices for partner companies to develop strongly in International Market. If you have any queries, questions or need further information, please donâ??t hesitate to let me know & contact us as bellow :
3.Technical Parameter: Model and specification :DL9930 Drop height: 10-1500mm, any setting Steel ball weights :55g, 64g, 110g, 225g, 535g (optional upon request) The maximum size of the test piece is :400 * 350mm Height display method: Graduated scale display (electrically selectable with LCD or touch screen control display) Drop height error :â?¤ �± 2mm Drop method: electromagnetic adsorption drop Control and lifting methods: Electric control electromagnet, manual lifting of electromagnet fixing rod (electric lifting using motor) Protective cage :around the protective device Sample fixation method: fixture clamping and fixation Drop bottom plate size :500 * 400 * 10mm Overall dimensions of the testing machine :500 * 400 * 1800mm Control box overall size :300 �? 370�? 1060mm Motor power: 0.4KW (electric) The net weight of the equipment is :approximately 40kg Power supply:AC220V/50Hz 5.Configuration List 1. Main purpose: The falling ball impact testing machine is suitable for testing the impact strength of plastic, ceramics, acrylic, glass, lenses, hardware and other products. 2.Product features: DC electromagnetic control mode is adopted to place the steel ball under the electromagnetic chuck and the steel ball is automatically sucked up. Press the drop key, the magnet releases the steel ball instantly, and the steel ball will conduct Free fall test to accurately impact the surface of the test piece; The drop height can be adjusted up and down, and there is a height scale attached (the electric series can directly display the test height) to determine the drop height of the component. Equipped with a laser positioning device, the impact testing position can be accurately aligned with the laser, resulting in more accurate testing results. Compliant with standards Test standards: JIS R3205:1989, ISO/DIS125421 12543-6:1997 AS/NZS2208:1996, GB/T9962-1999.