44.MODEL:DL- BTST Textile Sweater Button Push Adhesion Pull Tensile Strength
Button Push & Pull Tensile Strength button tensile strength dynamometer
Standard configuration:
1. Tension seat
2. Pushing and pulling force gauge
3. Two jaw pliers
4. Three jaw pliers
5. Tension pliers
6. Bottom fabric fixture
7. Male button fixture
8. Mother button clamp
Size: 280 * 220 * 777mm
Button tensile testing machine Button strength machine:
The purpose of this test is to define the responsibility of garment manufacturers to ensure that buttons, buttons, and fasteners are properly secured to the garment, preventing buttons from detaching from the garment and posing a risk of swallowing by infants. Therefore, all buttons, buttons, and fasteners on ready-made clothing must be tested by a button strength tester. This function performs uniform and vertical tensile testing on various buttons on clothing to check whether their firmness meets relevant safety standards
Standard: 16CFR1500.51-53, ASTM PS79-96
Operating instructions:
1. Install the fixture, cooperate with the test button, and lock the test sample onto the base tightly
2. Put down the fixture, grip the buttons tightly and pull them upwards. Each group of buttons should be able to withstand a minimum of 17 pounds of tension (7.72kg) and maintain it for 10 seconds without any signs of looseness or damage. At least 20 buttons per model need to be tested simultaneously to be considered qualified
If one of the buttons is loose or damaged, or if it is replaced, it is necessary to retest all of them
Ethanol alcohol distillation column 1. It is standard 95-96% alcohol equipment. Also it can distill pure water. 2.The distillation system has  three columns  and  continuous  distillation  process.The process is the  same as industrial(large scale) alcohol equipment.  Mash distillation  column distills  fermented  mash or light alcohol  to 50% alcohol ethanol . It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste,  ethanol discharge in waste 0.05%, better than international standard requirements. The first rectification distillation  column  increases  alcohol degree  to 70-75% ,  separates  fusel oil and high boiling point  Impurities.  It auto discharges waste water,  ethanol discharge in waste 0.05%, better than international standard requirements. The second rectification distillation  column  increases alcohol degree to 95%,  separates low boiling point  impurities  like acetaldehyde and methanol . 3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration  module, even  you can run it by a button.
Distillation column For Ethanol Alcohol Plant 1. It is standard 95-96% alcohol equipment. Also it can distill pure water. 2. The distillation system has three columns and continuous distillation process.The process is the same as industrial(large scale) alcohol equipment.     a. Mash distillation column distills fermented mash or light alcohol to 50% alcohol ethanol .  It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, ethanol discharge in waste ?¤0.05%, better than international standard requirements.     b. The first rectification distillation column increases alcohol degree to 70-75% , separates fusel oil and high boiling point Impurities. It auto discharges waste water, ethanol discharge in waste ?¤0.05%, better than international standard requirements.     c. The second rectification distillation column increases alcohol degree to 95%, separates low boiling point impurities like acetaldehyde and methanol . 3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration module, even you can run it by a button.
Bacoban DL Alcohol-free disinfection and cleaning of medical fittings and equipment and other surfaces (in accordance with Directive 93/42/EEC: MDD). The product conforms to British Standards under ISO standards DIN EN ISO 13485:2010; DIN EN ISO 9001:2008; DIN EN ISO 10993-1; DIN EN ISO 14971:2007; and EN 14885. Bacoban is a disinfectant product produced in Germany by Ropimex R Opel GmbH. Its certifications are under the Disinfectants Commission in the Association for Applied Hygiene (VAH) in collaboration with the Scientific Societies and Professional Associations DGHM, DGKH, GHUP, BVÃ?GD and BDH tested according to the DGHM Standard Methods for Testing Chemical Disinfection Processes and deemed to be effective for prophylactic disinfection and hygienic handwash. Does not contain Aldehyde or Phenol. Microbiological effectiveness Bacoban DL is effective against: bacteria, fungi, viruses (hepatitis B and C, HIV, influenza including H5N1and H1N1, Rotaviruses and adenoviruses), and as listed on the page 'Infections that Bacoban kills'
Weather strips of automotive Devulcanization and extruding machine with stainless 80 wire mesh and remove smell of Sulfur Packing is 1,250kg/pallet Hardness A type 63~65 /Tensile Strength 75~80kgf/sq cm / Elongation rate 200% / Specific Gravity 1.29
Features Of Granulated Blast Furnace Slag (GBFS) Granulated Blast Furnace Slag or GBFS is formed when Blast Furnace Slag or BFS is successively at a fast rate quenched from the furnace rather than left for cooling. It has a density of about 60% to 70% that of natural sand. This material has a much increased resistance to sulfate attack. This eventually leads to better performance in countering acids of any type. In GBFS, no type of reaction related to alkali and silica occurs. Also the material provides a huge saving in connection to carbon dioxide emission which is an extra boon. What constitutes GBFS are its properties that consist of durability, appearance, higher ultimate strength than concrete which is made up of Portland cement and high sustainability level of the product made out of this material.
Supplier: Industrial chemicals likes tetra sulpho optical brightener and di sulpho optical brighteners for pulp and paper, caustic soda flakes / sodium hydroxide, caustic soda lye, asa sizing agent, akd sizing agent, wet strength resin agent / dry strength resin (polyamido polyamine epichlorohydrin resin with a high% of solids 25 35%), sae anionic for sizing agent (butyl acrylate styrene polymer 24 26%), sae cationic for sizing agent (copolymer n [3 (dimethylamino) propyl] methacrylamide / styrene ]]) for paper industry, fluorescent brightening agents, optical brighteners for paper, fluorescent whitening agents, optical brightener, carbomer, carbopol, polyaluminium chloride, carbon brushes and brush holders, pp granules, plastic granules and many more.
Product name: WS-5 Other Name: Cooler 5(WS-5) Kinds: WS-23, WS-3, WS-5, WS-12, WS-10, WS-27 Molecular Formula: C15H27NO3 Molecular Weight: 269.38 Appearance: White crystals or powder Purity: 99% CAS NO.: 68489-14-5 EINECS No.: 695-735-2 Supplier: ZhenYiBio Relative Cooling Strength at First Onset WS-5>WS-12>WS-3>Menthyl acetate>WS-23>Menthyl lactate Cooling Longevity WS-12>WS-5>WS-23>WS-3>Menthyl acetate>Menthyl lactate Uses Physiological coolant in foods, beverages, tobacco products, toiletries, cosmetics and pharmaceuticals.
Product name: N,2-diethyl-2-(isopropyl)-3-methylbutyramide Other Name: N-ethyl-2,2-diisopropyl butanamide;WS-27 Kinds: WS-23, WS-3, WS-5, WS-12, WS-10, WS-27 Molecular Formula: C12H25NO Molecular Weight: 199.33 Appearance: White crystal powder Purity: 99% CAS NO.: 51115-70-9 EINECS No.: 256-978-6 Supplier: ZhenYiBio Relative Cooling Strength at First Onset WS-5>WS-12>WS-3>Menthyl acetate>WS-23>Menthyl lactate Cooling Longevity WS-12>WS-5>WS-23>WS-3>Menthyl acetate>Menthyl lactate WS-27 is a newly developed flavor coolant of the WS series. Compared with the coolant WS-23, it is more delicate and easier to dissolve. We developed a proprietary process to provide the WS-27 with a high purity product that does not have the bitter aftertaste of previous products. It mainly affects the front of the mouth and the tongue. And it has a high burst and high intensity of cooling sensation, suitable for a variety of products.
Product name: N,2,3-Trimethyl-2-isopropylbutamide Other Name: WS-23;Cooling agent WS-23 Kinds: WS-23, WS-3, WS-5, WS-12, WS-10, WS-27 Molecular Formula: C10H21NO Molecular Weight: 171.28 Appearance: White to Almost white Solid Purity: 99% CAS NO.: 51115-67-4 EINECS No.: 256-974-4 Supplier: ZhenYiBio Relative Cooling Strength at First Onset WS-5>WS-12>WS-3>Menthyl acetate>WS-23>Menthyl lactate Cooling Longevity WS-12>WS-5>WS-23>WS-3>Menthyl acetate>Menthyl lactate N,2,3-Trimethyl-2-isopropylbutanamide is a white, crystalline powder,which gives a physiological cooling sensation on skin or mucosa. It is mainly used to create cooling and freshness in oral care preparations. Uses Physiological coolant in foods, beverages, tobacco products, toiletries, cosmetics and pharmaceuticals.
