HR310 Series Digital Pressure Transmitter 1.overview HR310 series digital pressure transmitter is one of excellent products in our company, Which use advanced and mixed signal processing technology and unique compensation methods to realize high precision digital pressure measurement, Full scale digital linear calibration, full temperature digital compensation, compensation parameter stored in nonvolatile memory, multiple safety protection system to avoid the products cannot be used due to calibrate parameter lost; part of Circuits have power and watchdog monitor, mechanical part with full seal stainless steel structure, both of them remarkably improve the reliability of transmitter. The high precision digital pressure transmitter is widely and successfully used in many industries, such as pressure measurement in industrial process, hydrology and water conservancy, and geological prospecting etc. 2. Features High stable pressure sensing unit, with long-term stability High precision, up to 0.05ï¼?F.S(Linearity, repeatability, hysteresis); Adopts mixed signal microprocessor and Higher order fitting algorithm to realize high precision compensation Standard RS485 MODBUS-RTU Protocol, can be used in DCS or PLC system Low power consumption, when operating at full scale then the power consumptions about 4mA, outstanding advantage when use outside battery supply Anti-surge, electromagnetic interference
Measured Range 4-20 Liquid Level Gauge Transmitter Magnetic Liquid Level Gauge Transmitter, 4mA 20mA Liquid Level Gauge Quick Detailsï¼? Place of Origin Henan, China (Mainland) Brand Name WEILI Model Number ULZ Measuring range 300~6000mm Media weight Level:â?¥0.55g/cm3 Ambient temperature -40~80 Operating temperature -20~120 Work pressure 0.6;1.0;2.5;4.0Mpa measurement accuracy ±1cm(Pillar diameter 1cm) Product Descriptionï¼? UlZ series of magnetic liquid level meter is our factory to introduce advanced foreign technology, according to the principle of buoyancy and magnetic coupling effect developed. According to the relevant standards developed by the level of instrumentation, widely used in petroleum, chemical, pharmaceutical, food and other industries in various towers, cans, tanks, spherical containers and boiler equipment in the medium of liquid level, the level of direction. Main Featuresï¼? 1. Level gauge based on the principle of buoyancy and magnetic coupling developed 2. Coupled with the liquid level alarm, control switch, liquid, boundary of the upper and lower limits alarm, control and chain 3. Coupled with the reed - resistance level transmitter, the level, the boundary signal is converted into 4 ~ 20mADC standard current signal, remote indication, detection, recording control. 4 The product is eye-catching, intuitive readings, measurements are correct, 5 The product is safe and reliable, easy to maintain, from the impact of high and low temperature, the whole process of measurement without blind spots 6 Due to the complete separation of liquid and boundary indicating system from the medium, it is especially suitable for explosive and toxic environments. Technical Parametersï¼? Measuring range 300~6000mm(Increase the range can be customized) Nominal length 300-6000mm Media weight Level:Ï? â?¥0.55g/cm3Interface:Ï?1-Ï?2â?¥0.16g/cm3 Work pressure 0.6;1.0;2.5;4.0Mpa Ambient temperature -40~80 Operating temperature -20~120 measurement accuracy ±1cm(Pillar diameter 1cm) Connection flange size DN20,PN4.0 raised face flange HG20592-97
> User configurable CO ranges up to 1000 ppm > Optional 4-digit dual row LCD display to display carbon monoxide value in ppm > Field replaceable CO sensor > Health / status (Heartbeat) LED > DIP selectable Loop powered current output or voltage output available > Optional dual 2-wire output available > IP65 protection for enclosure > Wall mount arrangement > Internal switch provided to adjust zero ppm >DIP for range selection
> User configurable CO ranges up to 1000 ppm > Optional 4-digit dual row LCD display to display carbon monoxide value in ppm > Field replaceable CO sensor > Health / status (Heartbeat) LED > DIP selectable Loop powered current output or voltage output available > Optional dual 2-wire output available > IP65 protection for enclosure > Wall mount arrangement > Internal switch provided to adjust zero ppm >DIP for range selection
PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids. >All stainless steel construction >Excellent load cycle stability and shock resistance >4~20 mA, 2-wire output >Ranges up to 400 barg >DIN 43650 plug-in connector >Higher ranges on request >Integral LED or LCD display
PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids. >All stainless steel construction >Excellent load cycle stability and shock resistance >4~20 mA, 2-wire output >Ranges up to 400 barg >DIN 43650 plug-in connector >Higher ranges on request >Integral LED or LCD display
PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids. >All stainless steel construction >Excellent load cycle stability and shock resistance >4~20 mA, 2-wire output >Ranges up to 400 barg >DIN 43650 plug-in connector >Higher ranges on request >Integral LED or LCD display
PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids. >All stainless steel construction >Excellent load cycle stability and shock resistance >4~20 mA, 2-wire output >Ranges up to 400 barg >DIN 43650 plug-in connector >Higher ranges on request >Integral LED or LCD display
India Power Station Differential Pressure Transmitter CS-III-M Deyang Dongfang Yoyik is a strong manufacture and trade company. We have a wide range of mechanical parts and components generator parts, electrical and electronic products processing, hydraulic machinery and components, hydroelectric generating units, coal-fired generating units, especially professional accessories for generator units. The goods are absolutely authentic, rest assured. YOYIK provides multiple types of spare parts and equipments for power plant : #DF-Differential Pressure Transmitter CS-III-M-DF thermocouple range WRNK2-292 oil vacuum pump P-1825B Fuse XRNP-7.2/2-50-1 wave spring N-1916 motor shaft coupling A10VS0100DRS/32R-VPB12N00 pressure hose S100-AC-AL-0100 Ethernet Cable LKD9AA217970000 thermistor TE-208 twin screw pump HSNS210-42 Card Main pump working filter (outlet) multi stage centrifugal pump DFB-100-80-230 screw pump manufacturer DLZB820-R64B heater thermocouple TE-206 thermocouple voltage WRNR2-12 Speed Sensor CS-3 thermowell flange TE-209 electric oil transfer pump DLZB820-R65-3 roots vacuum pump 30SPEN Position sensor HTD-100-3 transfer pump fuel YW50-32-125 screw pump working principle ACG052K7NVBP rotary vane pump F3-SDV20-1P11P1A Communication Cable Mini DIN interface RS232 Platinum-Iridium Wire WRN2-239 0-600â?? single screw pump HSNS210-40A multi stage centrifugal pump DFB80-80-240 non-return valve S10P5 Differential Pressure Transmitter CS-III-M heater thermocouple TE-302 thermocouple wire type k WRNK2-332 pt100 thermocouple machine WRN-330 ceramic thermocouple TE-305 accumulator bladder 6.3L NBR 31.5Mpa Resistance Thermometers W08R0024A k-type thermocouple WREK2-321 thermocoupl 1000 TC03A2-KY-2B/S12 pumps centrifugal KSB65-250 PROFILE SEAL 564/550*17.11 Type K Thermocouple Cartridge WRN2-0301T axial piston pump PVH098R01AJ30A250000002 Gear pump PFG-327/D Heat Expansion Sensor & Transmitter TD-2-25 k type thermocouple 1200 degree TE-304 high temperature thermocouple TE-213 mechanical seals 3DG-7 thermocouple temperature meter WREK2-191 centrifugal pump parts DFBII100-80-230 single screw pump ACG 070K7 NVBP thermocouple temperature sensor WRNK2-391 Transducer LJB-1000A/10V hydraulic oil pumps 100LY-62-005 MAGNETIC FLOAT LEVEL METER MTUHZ53PB(25B)2C-2 R10-J piston vacuum pump PVH074R01AB10A250000002001AE10AThermocouple Cylindrical sensor TE-210 pressure hose S110-AC-AL-0040 Oil guard HZB200-430-02-01 thermocouple wire type k WRNR2-12 thermocoupl 1000â?? WRN2-239 0-600â?? radial piston pump A10VS018DFR1/31RPPA12K01 Differential Pressure Transmitter CS-III-M DFYL-2022-3-4-ZYR
Turbine generator partspower transmitter HAA-D1 Dongfang Yoyik Engineering Co., Ltd is located in Deyang, Sichuan, provides different kinds of industrial products and brands. Our company is specialized in researching and developing hear-resisting and wear-resisting materials. As a pump and valve manufacturer ourselves, we also offer other brands both domestic and from abroad. YOYIK provides multiple types of spare parts and equipments for power plant : #DF-power transmitter HAA-D1-DF Gapmeasupe Probe GJCT-15-E VALVE COVER D600B-265500A001 RTV epoxy adhesive 793 Rubber gasket 4Q5440 Level measuring transmitter CEL-3581A/GF HR anti-corona varnish 1244 F-class room temperature dried steam turbine LP cylinder sealing grease insulating dowel taper pin 4B2337 insulating hose (1/4) 2Q4513 sealant T2075 rotor slot wedge 3Q6195 insulating box 3F14206.2 Limit switch box AM014A0-2H PET fiberglass tape 0.1*25 1Q3301-33 generator end cap sealing grease T2575 TiteSealHydrogen sealing Sealant WH53351JG slot wedge with hole 4Q9844 F-grade modified epoxy glass fiber FJ6189 PRESSURE SWITCH TBN JACKING OI BPSN4KB25XFSP19 Filter SGF-H110*10FC fiberglass strip �?8 Sealant gun 04C0529 PET fiberglass tape 0.1*25 1Q3301-33 brush holder Q5C112.567.01MS oil sealing & oil baffle cover glass cloth tube 3640 air-dry clear insulating varnish H31-2 TITESEAL T20-66 Cylinder sealing grease DFSS-2 2.5KG SOCKET 1158M231-2 Dacron glass fiber strip �?5 THERMOMETER WTYY-1021 SENSOR LVDT FOR BFPT GOVERNOR 3000TD power transmitter HAA-D1 grease gun 5D463.338 T15 PET fiberglass strip �?5 mannual grease gun KH32 epoxy glass fiber board 3240 High temperature nut with groove GH4 D600B-261000A001 RTV adhesive 793A epoxy adhesive 6110 insulating water pipe assembly 1Q1632 TiteSealend cap Hydrogen sealing Sealant T20-75 H-grade varnished glass cloth tape 2450 0.15*25 insulating sleeve 4Q12825 O-RING Part: 709 epoxy ester air-dry red insulating varnish 9130 Servo valve MOOG 761K4112 insulating strip epoxy phenolic glass cloth tube 3640 �?17*�?21*31 TiteSeal steam turbine generator Sealant WH53351JG Neoprene rubber sealing gasket High temperature stud D600B-271000A020 RTV potting adhesive DECJ0704 RTV epoxy adhesive DECJ0792 Epoxy dipping adhesive 792 EMERGENCY OIL PUMP (EOP) 125LY-32-1 fiberglass strip �?8 TERTIARY OIL PUMP (TOP) 125LY-36-1 Gapmeasure Transmitter GJCF-15 resin 473ml slot Sealant HDJ892 Sealant T25-66 RTV HR anti-corona varnish DECJ0701 power transmitter HAA-D1 DFYL-2020-7-8-MY
*Accuracy: ±0.1% R.O. (DC / Potentiometer / Resistor / PT-100 / Load Cell) ±0.2% R.O. (AC) *Measuring AC, DC Voltage / AC, DC Current / Potentiometer / Resistor / PT-100 / Load Cell) *Small size, slim type 22.5mm, easily installation *High stability, non-flammable case (PA66), high safety*Accuracy: ±0.1% R.O. (DC / Potentiometer / Resistor / PT-100 / Load Cell) ±0.2% R.O. (AC) *Measuring AC, DC Voltage / AC, DC Current / Potentiometer / Resistor / PT-100 / Load Cell) *Small size, slim type 22.5mm, easily installation *High stability, non-flammable case (PA66), high safety
CR-606 fuel level transmitter (sensor) working principle The sensing part of the CR-606 series capacitive fuel level sensor is a coaxial container. When the fuel enters the container, the capacitance changes between the sensor housing and the sensing electrode. This change is converted by the circuit and is accurate. Linear and temperature compensated, output 4-20mA standard signal is supplied to the display instrument. CR-606 fuel level transmitter (sensor) performance indicators Detection range: 0.05-5m Accuracy: 0.1, 0.2, 0.5 Pressure range: -0.1MPa-32MPa Probe temperature resistance: -50-250 Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication Power supply voltage: 12-28VDC (intrinsic safety type needs to be powered by safety barrier) Fixed mode: threaded mounting M20�1.5, M27�2, M18�1.5, M16�1 Flange mounting DN25, DN40, DN50. Special specifications can be customized according to requirements Probe diameter: Φ12, Φ16, Φ25 Explosion-proof grade: intrinsic safety ExiaIICT6 flameproof ExdIICT5 Protection level: IP65 Intrinsic safety parameters: Ui: 28VDC, Ii: 93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH CR-606 fuel level transmitter (sensor) for occasions CR-6062 compact fuel level transmitter (sensor) industrial grade, suitable for 5MPA or below, temperature below 200, viscosity is not high fuel measurement, can be added with various protocols of communication CR-6061 automotive-specific fuel level transmitter (sensor) is suitable for the measurement of various fuel under normal temperature and pressure. The output damping time is adjustable from 30 to 180s. It can be equipped with 485 communication. CR-6062 standard fuel level transmitter (sensor) industrial grade, suitable for measurement below 5MPA, viscous fuel quality below 200, can be added with various protocol communication CR-6063 high temperature and high pressure type fuel level transmitter (sensor) industrial grade, suitable for below 32MPA, temperature measurement below 250, can be attached to various protocols CR-6061 universal fuel level transmitter (sensor) is suitable for measuring various fuel and hydraulic fuel under normal temperature and pressure, and can be equipped with 485 communication.
Short Description: CR-605 series universal liquid level gauge is suitable for measurement of sewage, oil (sheathed tube), high viscosity, easy to crystallize, easy to adhere, changeable medium , foam or aerosol impact and other diffcult to measure situation. The whole machine does not have any movable or elastic parts with advantages of impact resistance, convenient installation, high reliability, high precision and good cost performance. It can replace the RF admittance, radar, ultrasonic, magnetostrictive and other level gauges to make accurate measurements. The core components use advanced RF capacitance sensing circuit to convert to standard electric signal after precision temperature compensate and linear correction through inner processor. The product uses tomography technology to automatically detect the dielectric constant and temperature changes of the medium, automatically calibrate, and automatically adapt to the measured medium. In any case, you can adapt to different measurement requirements in complex locations without recalibration. And it has excellent resistance to hanging materials, anti-condensation, anti-bubble and other super adaptability. The products own protection rating is IP68, which enables long-term stable measurement in harsh environments. Advantagesï¼? â?²Automatic adaptation, automatic calibration, long-term stable output true height value. â?²Anti-hanging material, anti-condensation, anti-bubble and other anti-pollution ability. â?²The structure is simple without any movable parts, high reliability and low maintenance. â?²A variety of signal outputs are available for easy access to different systems. â?²It is not affected by factors such as temperature, specific gravity and pressure of the liquid to be tested. â?²High temperature resistance â?¤150°C, high pressure resistance â?¤2.5MPa, long life. â?²Good sealing performance, protection class IP68 (except CR6052). â?²Perfect overcurrent, overvoltage, and power polarity protection measures. Performance indexï¼? Measurement rangeï¼?0.01~10m Precision: 0.5ã??1 Ambient temperature: -20~60 Storage temperatureï¼?-40ï½?+85 Probe temperature resistance: -40~150 Wet contact material: 304 stainless steel/PTFE Supply voltage: 12ï½?28VDC Power consumptionï¼?â?¤30mW Pressure range: -0.1~2.5MPa Long-term stability:â?¤0.2%FS/year Output signal: 4ï½?20mA/0-5V/RS485/CAN communication Fixed way: thread mounting M27Ã?2ï¼?M33Ã?2ï¼?G2 thread Temperature driftï¼?â?¤0.02%FS/ï¼?0ï½?70ï¼? Explosion-proof parameter: intrinsic safety Exiaâ?¡C T6 Ga IP gradeï¼?IP67/IP68 Intrinsic safety parameter:Ui:28VDC,Ii:93mA,Pi:0.65W,Ci:0.02uf, Li:0.1mH
Product Overview NCS-PT105IIS series Smart Pressure Transmitter with advanced, mature, reliable Piezoresistive Silicon Sensors has been designed meticulously by combining advanced microprocessor technology and digital capacitance measurement techniques. The powerful functions and high-speed computing capability of the microprocessor make it have excellent qualifications such as intelligent, high-precision, high reliability, stable zero and so on. Its LCD can display many physical parameters such as pressure, temperature, current. It can be realized zero adjustment, range settings and other features by key-press operation, and easy to on-site tests. NCS-PT105IIS series Smart Pressure Transmitter supports HART, FF H1, Profibus PA, Profibus DP protocol and can measure pressure, differential pressure, liquid level, flow, and other industrial parameters. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc. Features Performance up to 0.075% of accuracy Gauge pressure, absolute pressure Automatically environmental temperature compensation Parameters can be set by magnetic sticks, communicator, HOST software Measurement media: liquid, gas and stream HART®, FOUNDATIONâ?¢ Fieldbus, PROFIBUS® Up to ±0.1% of Upper Range Limit (URL) for 1 year
CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation. The CR-6062 industrial grade fuel level transmitter (fuel level sensor) core components are converted to standard electrical signals (typically 4-20 mA) using advanced RF capacitance sensing circuits through 16-bit microcontrollers with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with two buttons or two leads to suit different requirements in complex locations. CR -6062 Industrial Grade Fuel Level Transmitter (Fuel Level Sensor) Working Principle The sensing part of the CR-6062 industrial grade fuel level transmitter (fuel level sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion is performed with precise linear and temperature compensation, and a 4-20 mA standard signal is output to the display meter. CR -6062 Industrial Grade Fuel Level Transmitter (Fuel Level Sensor) Performance Specifications Detection range: 0.05 -5m Accuracy: 0.1, 0.2, 0.5 Pressure range: -0.1MPa-32MPa Probe temperature resistance: -50 -250 Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier) Fixing method: Thread mounting M20�1.5,M27�2,M18�1.5,M16�1 Flange mounting DN25, DN40, DN50. Special specifications can be customized according to requirements Probe diameter: Φ 12 , Φ 16 , Φ 25 Explosion-proof grade: Intrinsic Exia II CT6 Explosion-proof Exd II CT5 Protection level: IP65 Intrinsic safety parameters: Ui : 28VDC , Ii : 93mA , Pi : 0.65W , Ci : 0.042uf , Li : 0mH
CR-605 series universal liquid level gauge is suitable for measurement of sewage, oil (sheathed tube), high viscosity, easy to crystallize, easy to adhere, changeable medium , foam or aerosol impact and other difficult to measure situation.The whole machine does not have any movable or elastic parts with advantages of impact resistance, convenient installation, high reliability, high precision and good cost performance.It can replace the RF admittance, radar, ultrasonic, magnetostrictive and other level gauges to make accurate measurements. The core components use advanced RF capacitance sensing circuit to convert to standard electric signal after precision temperature compensate and linear correction through inner processor.The product uses tomography technology to automatically detect the dielectric constant and temperature changes of the medium, automatically calibrate, and automatically adapt to the measured medium.In any case, you can adapt to different measurement requirements in complex locations without recalibration.And it has excellent resistance to hanging materials, anti-condensation, anti-bubble and other super adaptability.The product's own protection rating is IP68, which enables long-term stable measurement in harsh environments. The product complies with GB3836.4-2010 and GB3638.1-2010
The series 610 low differential pressure transmitters are capable of measuring the pressures and flow of air or non-conducting gases at high resolutions. Designed specifically for clean rooms, isolation rooms, and other critical environments, the series 610 uses an improved all stainless steel micro-tig welded sensor to detect differential pressure and convertthis pressure into a linear dc electrical signal by a unique electrical circuit. This unit is ideal for situations when accurate and reliable pressure monitoring is essential. Easy access pressure ports and electrical connections, removable process heads, and detachable terminal blocks make for fast and easy installation. The series 610 transmitters are available for air pressure ranges as low as 0.1 in w.C.Full-scale. -
200W UHF DTV Transmitter Main features: Wide-band frequency:(470-862MHz) Low noise and power consumption Extremely low group delay Stable constant power output from ALC Output VSWR detection protection Suitable for DTV transmission system with single or multiple channels Widely used in transmission of HFC,AML or MMDS TV signals wireless DTV networking at a lower cost Modular design faciliates installation and maintenance Automatic and manually operated switching backup system available Embedded lightning protector to avoid lightning overvoltage and instant overvoltage Local monitoring and control Wireless remote monitoring(optional) Technical specification: Frequency range:470-860MHz Input signal level:87-117 Noise figure:3db Digital average output power:53dbm Power Consumption:1 KW Power Supply Connector: IEC320 Cooling System Temperature-controlled forced air cooling Operating Temperature Range:0 ~ +45¡ãC Operating Humidity:0 ~ 95%, non-condensing Storage Temperature:-55 ~ +85¡ãC Storage Relative Humidity:0 ~ 95%, non-condensing. Size(W'H'D)/Weight:620mmX810mm X960mm /120kg Package:plywood.
GD-F06 fixed/roling code transmitter for doors, windows and curtains, wireless controller, voice transmission module, and the research of the relevant products.
GD-F28 fixed/roling code transmitter for doors, windows and curtains, wireless controller, voice transmission module, and the research of the relevant products.