Dwyer Series 610 Low Pressure Transmitters

Dwyer pressure transmitters

A&S Transmitter Co., Ltd. provide all types of Dwyer Transmitters

Dwyer Series 610 Low Differential Pressure Transmitters
Dwyer Series 616 Differential Pressure Transmitter
Dwyer Series WWDP Wet-to-Wet Differential Pressure Transmitter
Dwyer Series TPT Pressure Transmitter,
Dwyer Series DPT Digital Pressure Transmitter,etc.
Dwyer Series 628 pressure transmitters

Except Dwyer Transmitters, other brands we can offer are listed as below:
Honeywell pressure transmitter
Rosemount pressure transmitter
Dwyer pressure transmitter
Foxboro pressure transmitter
Emerson pressure transmitter
Danfoss pressure transmitter
Yokogawa pressure transmitter
Yamatake pressure transmitter
Fuji pressure transmitter
Siemens pressure transmitter
Dynisco pressure transmitter
Hydac pressure transmitter
ABB pressure transmitter
E+H pressure transmitter
Wika pressure transmitter
Ashcroft pressure transmitter
Murphy pressure transmitter
Sitrans pressure transmitter
Vega pressure transmitter
Anderson pressure transmitter
Keller pressure transmitter
Modus pressure transmitter
Noshok pressure transmitter
Ametek pressure transmitter
Druck pressure transmitter
Taylor pressure transmitter
Setra pressure transmitter
Sensym pressure transmitter
Jumo pressure transmitter
DP pressure transmitter
Fisher pressure transmitter
Bourdon haenni pressure transmitter
Huba pressure transmitter
Gems pressure transmitter
Trafag pressure transmitter
Meas pressure transmitter

Dwyer Level Transmitter

A&S Transmitter Co., Ltd. supplies all models of Dwyer Level Transmitter
Dwyer Capacitive Level Transmitter Series CRF2
Dwyer Float Level Transmitter Series CLT
Dwyer Submersible Level Transmitter Series PBLT2 and PBLTX
Dwyer Submersible Level Transmitter Series SBLT2 and SBLTX
Dwyer Submersible Level Transmitter Series MBLT
Dwyer Submersible Level Transmitter Series FBLT
Dwyer Ultrasonic Level Transmitter Series ULT
Dwyer Ultrasonic Level Transmitter Model ULTM
Dwyer Ultrasonic Level Transmitter Model ULSL
Dwyer Ultrasonic Level Transmitter Model ULSM
Dwyer Ultrasonic Level Transmitter Model ULSS



Other brands of Level Transmitter we can offer:
Siemens Level Transmitter
Honeywell Level Transmitter
Rosemount Level Transmitter
Fuji Level Transmitter
ABB Level Transmitter
Danfoss Level Transmitter
Endress Hauser Level Transmitter
Krohne Level Transmitter
Foxboro Level Transmitter
Kubler Level Transmitter
Dwyer Level Transmitter
Fisher Level Transmitter
Anderson Level Transmitter
Gems Level Transmitter
Omega Level Transmitter
WIKA Level Transmitter
MTS Level Transmitter
ENRAF Level Transmitter
Vega Level Transmitter
K-TEK Level Transmitter
Magnetrol Level Transmitter
Flowline Level Transmitter
Ametek Level Transmitter
Killer Level Transmitter
Burkert Level Transmitter
L&J Level Transmitter
APG Level Transmitter
Taylor Level Transmitter
IVECO Level Transmitter
Kele Level Transmitter
Emerson Level Transmitter
SOR Level Transmitter
Orion Level Transmitter
Kobold Level Transmitter
TI Level Transmitter
Broil senostk Level Transmitter
Princo Level Transmitter
ABM Level Transmitter
Mercoid Level Transmitter
Intempco Level Transmitter
Milltronics Level Transmitter
Bailey Level Transmitter
Masoneilan Dresser Level Transmitter
Hawk Level Transmitter
Mobrey Level Transmitter
Daehan Level Transmitter
Bindicator Level Transmitter
Ohmart Level Transmitter
PMC Level Transmitter
Hayward Level Transmitter

Except the level transmitter, A&S Transmitter Co., Ltd. also can provide below products:
pressure transmitter,flow transmitter,temperature transmitter,differential transmitter,level gauge and flow meter.

Should you have any questions,please feel free to ask us. We are very pleased to help with the quotation.

Intek Instruments is engaged in offering a wide gamut of high quality Pressure Transmitter / Transducer.

1. Brand:- Gefran Italy
2. Series:- KS Series
3. Pressure Range:- from 1 Bar to 1000 Bar
4. Output Voltage:- 0-10 VDC or 4-20 mA
5. Wetted Parts:- Stainless Steel
6. Accuracy:- < ± 0.5% FS
7. Response Time:- < 1 msec.
8. Application:- Suitable for all industrial applications, especially, on hydraulic (presses, pumps, power pack, fluid power, etc.) with severe conditions usually with high level of shock, vibration, and pressure and temperature peaks.

HR310 Series Digital Pressure Transmitter
1.overview
HR310 series digital pressure transmitter is one of excellent products in our company, Which use advanced and mixed signal processing technology and unique compensation methods to realize high precision digital pressure measurement, Full scale digital linear calibration, full temperature digital compensation, compensation parameter stored in nonvolatile memory, multiple safety protection system to avoid the products cannot be used due to calibrate parameter lost; part of Circuits have power and watchdog monitor, mechanical part with full seal stainless steel structure, both of them remarkably improve the reliability of transmitter. The high precision digital pressure transmitter is widely and successfully used in many industries, such as pressure measurement in industrial process, hydrology and water conservancy, and geological prospecting etc.

2. Features
High stable pressure sensing unit, with long-term stability
High precision, up to 0.05ï¼?F.S(Linearity, repeatability, hysteresis);
Adopts mixed signal microprocessor and Higher order fitting algorithm to realize high precision compensation
Standard RS485 MODBUS-RTU Protocol, can be used in DCS or PLC system
Low power consumption, when operating at full scale then the power consumptions about 4mA, outstanding advantage when use outside battery supply
Anti-surge, electromagnetic interference

Pressure Transmitter for Sandvik LH307/LH410

Notice

1. All the supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring diagram,factory date, etc. Please check carefully to avoid misuse.

2. Installation should check whether the field interface is connected to the product according to the connection mode and thread type of the product.The mouth is the same. If it is a threaded interface, it should be tightened slowly and sealed carefully. Torque can not be added directly to the transmitter shell, but only on the six sides of the pressure interface.

3. The wiring should be strictly in accordance with the instructions of our company.

4.This product is a precise instrument. It is forbidden to disassemble, colide,fall,throw hard or punch the drainage hole with a sharp instrument.

5. The transmitter can work by electricity, but the preheating output is stable for 30 seconds.

6. If any abnormality is found in use, the power supply should be turned off, the use should be stopped, the inspection should be carried out, or contact our technical department direct.

7.When transporting and storing, the original packaging should be restored and stored in a cool, dry and ventilated warehouse.

8.The quality assurance period is 12 months.
Intelligent Operation Method



1. LCD shows the output percentage or process pressure. Press the S key to select the display percentage or pressure.Press Z key to select pressure unit KPa or Mpa when displaying pressure.

2. Press S+Z key for 8 seconds, then release it at the same time, press Z key to set the zero value; Press the S key set the range. note: this function can only be triggered once an operation.

3. Adjustments to zeros or ranges may cause changes in the displayed options, i.e.The percentage being displayed becomes pressure or KPa becomes Mpa, etc. All these changes are shown only in the display, and have no effect on the internal parameters of the transmitter, pressure detection and current output. After adjusting the zero point and range, the S and Z keys can be used to select the desired percentage or pressure.

4. Zero-setting in field pressure-free state: 30 seconds after pressing S+Z key, the display shows zero time at the same time release the two keys, that is, zero.
Simulated operation method

1.Zero-setting in pressure-free condition: The potentiometer with the word "zero" on the circuit board is adjusted to zero when it is displayed on the spot.(Note: Clockwise increase, counterclockwise decrease)

2.The potentiometer marked "range" on the circuit board can not be adjusted without standard pressure, so as to avoid the disorder of measurement range.

General Description

The series of pressure transducers use imported high-quality pressure sensors and special integrated modules, through fine temperature, zero, full range, and non-linear compensation to achieve accurate measurement and transmission of pressure changes in liquid, gas, steam and other media.
Technical Index

Measuring medium: liquid, gas, steam

Pressure range: -0.1MPA~0~60MPA

Accuracy grade: ±0.2%FS, ±0.5%FS

Stability: â?¤0.2%FS/year

Temperature drift: â?¤0.02%FS/(range 0~70)

Environment temperature: -20+85

Storage temperature: -20+85

Output signal: 4-20mA or 1-5VDC

Supply voltage: 12-40VDC

Allow overload: two times the quota voltage

Explosiveproof grade: intrinsically safeia II C T6 flameproof dII C T6

Wetware material: 316 stainless steel and 1Gr18Ni9Ti

Shell material: die casting alloy aluminum,surface epoxy spraying

Pressure interface: M20X1.5

Weight: ordinary 0.75kg, with on-site instructions 1kg
Structure Type

x1
Connection

x2x31
x4

The link mode and output signal of the compact tranmitter are as follows:

Two-wire system:

1 Positive power supply

2 Negative power supply

3 Empty

4 Shell

Three wire system:

1 positive power supply

2 Negative power supply (Negative sharing with signals)

3 Signal+

4 Shell
x5

The connection mode of aviation plug transmitter is as follows:

Two-wire system(direct outlet type)

1 Red wire connection positive power supply

2 Black wire connection negative power supply
Notice

1. All the supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring diagram,factory date, etc. Please check carefully to avoid misuse.

2. Installation should check whether the field interface is connected to the product according to the connection mode and thread type of the product.The mouth is the same. If it is a threaded interface, it should be tightened slowly and sealed carefully. Torque can not be added directly to the transmitter shell, but only on the six sides of the pressure interface.

3. The wiring should be strictly in accordance with the instructions of our company.

4.This product is a precise instrument. It is forbidden to disassemble, colide,fall,throw hard or punch the drainage hole with a sharp instrument.

5. The transmitter can work by electricity, but the preheating output is stable for 30 seconds.

6. If any abnormality is found in use, the power supply should be turned off, the use should be stopped, the inspection should be carried out, or contact our technical department direct.

7.When transporting and storing, the original packaging should be restored and stored in a cool, dry and ventilated warehouse.

8.The quality assurance period is 12 months.

PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids.

>All stainless steel construction
>Excellent load cycle stability and shock resistance
>4~20 mA, 2-wire output
>Ranges up to 400 barg
>DIN 43650 plug-in connector
>Higher ranges on request
>Integral LED or LCD display

PTX201 is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and mild corrosive fluids.

>All stainless steel construction
>Excellent load cycle stability and shock resistance
>4~20 mA, 2-wire output
>Ranges up to 400 barg
>DIN 43650 plug-in connector
>Higher ranges on request
>Integral LED or LCD display