- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
Parameters Required Value Physical Conditions: - Color - Smell - Taste - Water clear to very pale yellow Typical coconut aroma, no rancid Typical coconut taste Moisture Max. 0.2% Iodine Number 4.10 - 11.0 g iod/100g Free Fatty Acid as Lauric Acid Max. 0.2% Peroxide Number Max. 2 mg ek/kg Fatty Acid Composition: - Caproic Acid (C6:0) - Caprilic Acid (C8:0) - Capric Acid (C10:0) - Lauric Acid (C12:0) - Myristic Acid (C14:0) - Palmitic Acid (C16:0) - Stearic Acid (C18) - Oleic Acid (C18:1) - Linoleic Acid (C18:2) - Linolenic Acid (C18:3) - 0.0% - 0.7% 4.6% - 10.0% 5.0% - 8.0% 45.1% - 53.2% 16.8% - 21.0% 7.5% - 10.2% 2.0% - 4.0% 5.0% - 10.0% 1.0% - 2.5% 0.0% - 0.2% Total Plate Count Max. 10 colony/ml Contaminants: - Iron (Fe) - Copper (Cu) - Lead (Pb) - Cadmium (Cd) - Arsenic (As) - Max. 5.0 mg/kg Max. 0.4 mg/kg Max. 0.1 mg/kg Max. 0.1 mg/kg Max. 0.1 mg/kg General Terms and Conditions Please read the following general terms and conditions. Some special requirements can be discussed upon mutual agreement. Delivery time: In general, we deliver 4 weeks after order confirmation Order quantity: There's no minimum order quantity, but to make shipping cost more efficient, we suggest to order at least one full container load (FCL) in 20ft container, which we can load up to 10,000 kg net Packaging: We pack the VCO product according to buyer's requirement. The packaging is printed with eitherour brand (Gonavco) or buyer's own brand and label accordingly. If you don't have artwork for your brand, our graphic designer will be happy to help you in designing your brand for free of charge. Please note that we, as the manufacturer, is not responsible for any legal issue regarding trademark of your own brand. Pre-shipment inspection: Before loading into a container, an independent surveyor will inspect the product and analyze it at an accredited laboratory to check the quality. All batches must be compliance with Indonesian Standard Quality for VCO (SNI 7381:2008) Payment method: We prefer payment by Bank Wire Transfer with 40% amount should be paid in advanced and 60% balance shall be paid against scanned copy of Bill of Lading (B/L). Original B/L will be sent once balance payment is cleared. We will consider any other payment options such as Letter of Credit (L/C) or Cash Against Documents (CAD). Origin Indonesia NB : Please ask for stock and price first before buying You can customized your own specification Term of Payment : 50% DP, 50% before stuffing if u are interested can contact me in whats'up : https://wa.me/qr/3EV54I4CIBGQF1 check our website: https://bit.ly/3RLTazg
Minimum Order Quantity: 1000 MT / Month, Payment Terms: Bank Transfer/ LC at Sight Irrevocable Transferable , Packing: Bottle /Jerry Can / Flexi Tank, Country of Origin: Indonesia, Loading port: Any port of Indonesia, Shipping: In Container / in Bulk Carrier if MOQ > 10000 MT, Freight charge will depend on the Port of Discharge. Shipping Terms: CFR, Specification: Free Fatty Acid as Palmitic Acid 0.25% Max, Moisture & Impurities (M&I) 0.30% Max, Iodine Value (IV) 55 Min, Melting Point 24 °C Max, Cloud Point 15 °C Max, Color (5¼" Lovibond Cell) 3 Red Max.
Minimum Order Quantity: 1000 MT / Month, Payment Terms: Bank Transfer/ LC at Sight Irrevocable Transferable , Packing: Bottle /Jerry Can / Flexi Tank, Country of Origin: Indonesia, Loading port: Any port of Indonesia, Shipping: In Container / in Bulk Carrier if MOQ > 10000 MT, Freight charge will depend on the Port of Discharge. Shipping Terms: CFR, Specification: Free Fatty Acid as Palmitic Acid 0.10% Max, Moisture & Impurities (M&I) 0.10% Max, Iodine Value (IV) 60 Min, Melting Point 24 °C Max, Cloud Point 6 °C Max, Color (5¼" Lovibond Cell) 3 Red Max.
Minimum Order Quantity: 1000 MT / Month, Payment Terms: Bank Transfer/ LC at Sight Irrevocable Transferable , Packing: Bottle /Jerry Can / Flexi Tank, Country of Origin: Indonesia, Loading port: Any port of Indonesia, Shipping: In Container / in Bulk Carrier if MOQ > 10000 MT, Freight charge will depend on the Port of Discharge. Shipping Terms: CFR, Specification: Free Fatty Acid as Palmitic Acid 0.10% Max, Moisture & Impurities (M&I) 0.10% Max, Iodine Value (IV) 58 Min, Melting Point 24 °C Max, Cloud Point 8 °C Max, Color (5¼" Lovibond Cell) 3 Red Max.
Minimum Order Quantity: 1000 MT / Month, Payment Terms: Bank Transfer/ LC at Sight Irrevocable Transferable , Packing: Bottle /Jerry Can / Flexi Tank, Country of Origin: Indonesia, Loading port: Any port of Indonesia, Shipping: In Container / in Bulk Carrier if MOQ > 10000 MT, Freight charge will depend on the Port of Discharge. Shipping Terms: CFR, Specification: Free Fatty Acid as Palmitic Acid 0.10% Max, Moisture & Impurities (M&I) 0.10% Max, Iodine Value (IV) 56 Min, Melting Point 24 °C Max, Cloud Point 10 °C Max, Color (5¼" Lovibond Cell) 3 Red Max.
Loc Nam Import Export Company Limited (Loc Nam Imex Co., LTD) is an exporter specialized in providing bulk quantities of high quality agricultural products in Vietnam. Established since 2012, with more than 10 years building and developing, we now have more than 20 items in our catalogue including Black and white pepper, cashew nuts, coffee and spices. Our main export markets are Asia and Europe. We pride ourselves on our market and product knowledge, high quality management and customer services including processing facilities which meet the international standards of ISO 22000, ISO 9001, HACCP. About pepper, we produce a wide rank of pepper including: - Black pepper (FAQ) - Cleaned black pepper - Light berry pepper - Pin head pepper - White pepper (Double washed) Specifications of Pin head pepper: - Moisture : 13.5% max - Above mesh 1.5 mm: 90% min - Packing: PP bag (net:30 kg) - Origin: Viet Nam - Port of loading: Ho Chi Minh Port, Viet Nam
Descriptions: HL-951T Touch screen type tensile testing machine sesigned and manufactured according to ASTM, ISO, DIN, GB/T etc standards. It is suitable for wide range of material for tension, compression, bending, shearing and low cycle test. It Can automatically detect the tensile (compression) strength, elongation rate (or strain), force value, elongation, low cycle fatigue and other parameters, and can display a variety of stress strain curve. Standard: GB/Tã??ISOã??ASTMã??JISã??DIN Features: 1.High accuracy servo motor to control test speed. 2.Ball screw no backlash to guarantee the low noise and hiHL driving efficiency 3.High accuracy load cell to measure the test load 4.High accuracy photoelectric encoder to measure the displacement. 5.Maxtest software has strong function, it can show test load, displacement, test speed, test status, and also has the function of peak load holding, peak displacement holding and self return original position. 6.Thousands of test fixture can be used according to different test request; 7.Compact structure with easy operation.
Biesse Part No.: 1705A0123 1705A0123 tool holder clips Biesse tool holder (white fork) HSK F63 Biesse HSK 63F tool clips Biesse Rover tool holders Biesse CNC tool gripper HSK63F Biesse HSK 63F plastic tool fork Biesse tool collet HSK F63 1705A0123 HSK F63 Tool Holder Clips for Biesse Rover CNC This Biesse 1705A0123 spare part is the consumable of Biesse Rover CNC. HSK 63F tool fork is for the HSK63F tool holder clamping, used with carousel or side loading tool changer. HSK63F Tool Holder Forks Specifications: 1. Made in China, famous brand 2. Imported USA Dupont white plastic material, high quality, reinforced and anti-explosion. 3. The tool holder clips are resistant to the temperature changes and maintain very precise clutch tolerance. 4. Alloy steel block casting inside, reinforced structure, has high loading capacity, also with steel positioning pins. 4. Dynamic balance grade: G2.5, 30000rpm 5. Yaw precision: 0.005mm 6. Loading capacity: 8-10kgs 7. Last more than 60,000 times tool changing cycles. We have tested. 8. The same material as Italy fork used. The outlook is up to 95% same as Italy made. Lifetime can up to more than 90% of Italy made. 1705A0123 HSK63 plastic grippers are available in stock for quick delivery. Molded plastic with metal insert for rigidity and locking pin for aggregates also are available here. Beside used on Biesse Rover CNC machines, these tool changer grippers are also widely used on CNT Motion, CR Onsrud, DMS, Flexicam, Multicam, Northwood, Techno, Laguna, Thermwood, Bulleri, ITALMAC Zeus, KDT, Masterwood auto tool changer CNC router machines. They are an exact interchange tool holder gripper.
Model POE-S2004FB Ports 4 10/100Mbps POE + 2 10/100Mbps Uplink Power Input AC 100-240V, 50/60Hz, 1.0A Max. Power Output DC 48-57V, 80W (Rated), Full Load Max. 65W (Net Output) Max. 60W for 1st PoE port Max. 30W for 2nd~4th PoE port Data Exchange 10/100Mbps (Gigabit is optional and available), Store and Forward Bandwidth/MAC 1.6Gbps, 1K Package Forwarding/Buffer 1.15Mpps, 768K Power/Data Assignment Power: pin 1,2 + pin 3,6 - ; Data: pin 1,2,3,6 Ambient Environment Operating temperature: -10~55 Storing temperature: - 40~75 Operating Humidity: 5%~90% RH, No condensing Storing Humidity: 5%~95% RH, No condensing Network Protocolï¼? IEEE 802.3 Ethernet media access control protocol IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af/at/PoE++ Power over Ethernet cable pairs or device IEEE 802.3x Flow control IEEE802.1q VLAN Network bridge operation Data Speed Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Network Medium 10Base-T: Pair 2 Category 3,4,5(Cat3,4,5) UTP/STP(â?¤250m) 100Base-TX: Pair 2 Category 5(Cat5) or better UTP/STP(â? 150m) System Mode Standard Free communication VLAN Port Isolation 250m Supper long-distance transmission Lightning Protection 3KV 8/20us Certificate CE, FCC, RoHS Warranty 1~2 years Size/Weight PoE Switch Size: 190mm*130mm*33mm (L*W*H) Packing Box Size: 310mm*210mm*60mm (L*W*H) Net Weight: 0.9kg, Gross Weight:1.1kg
Features for the Champion 100416 - Generator Tri-Fuel Technology Your 8000-watt portable generator operates on natural gas, propane, or gasoline, plus natural gas and propane hoses are included so the unit is ready to run on any fuel right out of the box. Electric Start Power up the 459cc Champion engine with the handy rocker switch, battery included. Intelligauge with CO Shield�® rack voltage, frequency, session run time, and total run time to monitor output and track maintenance intervals, plus the UL-recognized sensor uses an LED to indicate CO shutoff or fault. Powerful Gasoline: 10,000 starting watts and 8000 running watts, propane: 9000 starting watts and 7200 running watts, natural gas: 8750 starting watts and 7000 running watts and engine oil is included. SPECIFICATIONS Portable Generator Technology : Tri Fuel, CO Shield Gasoline Starting Watts: 10000W Gasoline Running Watts: 8000W Propane Starting Watts: 9000W Propane Running Watts: 7200W Natural Gas Starting Watts: 8750W Natural Gas Running Watts: 7000W Gasoline Starting Amps at 120V: 83.3A Gasoline Starting Amps at 240V: 41.7A Gasoline Running Amps at 120V: 66.7A Gasoline Running Amps at 240V: 33.3A Propane Starting Amps at 120V: 75A Propane Starting Amps at 240V: 37.5A Propane Running Amps at 120V: 60A Propane Running Amps at 240V: 30A Natural Gas Starting Amps at 120V: 72.9A Natural Gas Starting Amps at 240V: 36.5A Natural Gas Running Amps at 120V: 58.3A Natural Gas Running Amps at 240V: 29.2A Volts: 120/240 Frequency: 60Hz Outlets: GFCI 120V 20A Duplex (5-20R) (2), 120V 30A Locking (L5-30R), 120/240V 30A (L14-30R) GFCI Outlets: Yes Covered Outlets: Yes Covered Circuit Breakers: Yes Gasoline Run Time at 1/2 Load: 12.5 h. Propane Run Time at 1/2 Load: 5 h. Noise Level: 74 dBA Parallel Capability: No DC Operation: No Voltmeter: Intelligauge Automatic Voltage Regulation: No Battery: Yes Start Type: Recoil, Electric Engine Brand: Champion Engine Size: 459cc Engine Type: 4-stroke Engine Speed: 3600 Fuel Type: Gasoline, Propane (LPG), Natural Gas (NG) Fuel Gauge: Yes Gasoline Capacity: 8.5 gal. Gasoline Tank Material: Steel Engine Oil Type: 10W-30 Engine Oil Capacity: 1.1 qt. Engine Oil Included: Yes Low Oil Shut-Off: Yes Wheels: Yes Wheel Type: Solid Wheel Diameter: 10 in. PGMA G300-2018 Compliant: Yes EPA Certified: Yes CARB Compliant: Yes DIMENSIONS Length: 27.6 in. Width: 28.2 in. Height: 26.0 in. Weight: 207.0 lb.
Suitable: Suitable for the size of the safety chain or transportation bundling chain corresponding to the reference table. It is firmly installed at the end of the chain and can be hung on the hook and loop for easy connection. Material: Made of grade 80 drop hammer forged alloy steel, with a sturdy structure that is not easily broken and durable to use. Easy to use: Designed for easy connection and release. They can help you create a sturdy hook pin and quick release cotter pin connection. Application: Very suitable for locking heavy cargo and securing large cargo in commercial and industrial applications. Product Code Size of chain Working Load Limit(lbs) Dimensions(in) Weights (lbs)Â Slip Hook Application H-331 A-331 B E P R HLF02G01 1/4" 1950 2750 0Â 15/16 3/8 2-9/16 0.5 HLF02G02 5/16" 2875 4300 13/32 1-1/16 7/16 2-23/32 0.75 HLF02G03 3/8" 4000 5250 19/32 1-5/16 15/32 3-1/4 1.2 HLF02G04 7/16" 5000 7000 9/16 1-9/16 9/16 3-21/32 2.06 HLF02G05 1/2" 6500 9000 3/4 1-11/16 5/8 4 2.75 HLF02G06 5/8" 9250 13500 13/16 2 3/4 4-15/16 4.75 HLF02G07 3/4" - 19250 1-5/16 2-1/2 1 6-3/32 10.3
Loc Nam Import Export Company Limited (Loc Nam Imex Co., LTD) is an exporter specialized in providing bulk quantities of high quality agricultural products in Vietnam. Established since 2012, with more than 10 years building and developing, we now have more than 20 items in our catalogue including Black and white pepper, cashew nuts, coffee and spices. Our main export markets are Asia and Europe. We pride ourselves on our market and product knowledge, high quality management and customer services including processing facilities which meet the international standards of ISO 22000, ISO 9001, HACCP. About pepper, we produce a wide rank of pepper including: - Black pepper (FAQ) - Cleaned black pepper - Light berry pepper - Pin head pepper - White pepper (Double washed) Specification of Black pepper (FAQ) - Moisture : 13.5% max - Admixture : 1 % max - Density : 500 580 g/l - Packing: PP bag (net:25/50kg) - Container capacity: 13,5 17MT/20FCL; 28 MT/40HC - Origin: Viet Nam - Port of loading: Ho Chi Minh Port, Viet Nam
Loc Nam Import Export Company Limited (Loc Nam Imex Co., LTD) is an exporter specialized in providing bulk quantities of high quality agricultural products in Vietnam. Established since 2012, with more than 10 years building and developing, we now have more than 20 items in our catalogue including Black and white pepper, cashew nuts, coffee and spices. Our main export markets are Asia and Europe. We pride ourselves on our market and product knowledge, high quality management and customer services including processing facilities which meet the international standards of ISO 22000, ISO 9001, HACCP. About pepper, we produce a wide rank of pepper including: Black pepper (FAQ) Cleaned black pepper Light berry pepper Pin head pepper White pepper (Double washed) Specifications of White pepper (Double washed) - Moisture : 13.5% max - Admixture : 0.2% max - Density : 630 g/l min - Black seed: 2% max - Packing: PP bag (net:25/50kg) - Container capacity: 17MT/20FCL; 27 MT/40HC - Origin: Viet Nam - Port of loading: Ho Chi Minh Port, Viet Nam
Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting line Keyword: Miniature Circuit Breaker Automatic Assembly, Miniature Circuit Breaker, Automatic Assembly line, Assembly Machine, Assembly Production Line Product Introduction Basic operation process: ï?¼Loading by AGV robots, printing QR codes based on the product work order issued by the SAP system, and then separating the upper and lower shells. ï?¼Bottom coating of the upper shell: The installation of three components is completed through ten processes, and after each assembly is completed, there is a corresponding installation accuracy testing process to ensure that the assembly is completely qualified. ï?¼Installation of lower shell components, upper and lower shell assembly: A total of 25 processes are used to install 12 components. After each part is assembled, guide pins are used to ensure the upper and lower assembly. After the installation of internal components is completed, the product's on/off function is tested. After passing the test, rivets are installed, pressed again, and the screws are removed. All installations are checked, and after passing the test, they are transferred to the inspection station. ï?¼Unipolar products undergo instantaneous detection, delay detection, cooling tower and other unit inspections, and are then labeled with QR codes and covers before being transferred to the next workstation. ï?¼Multi pole products require 9 steps of multi pole assembly, and after assembly, a second delay is performed to verify the stability and reliability of the product ï?¼Finally, it is transferred to the automatic packaging unit through pressure resistance testing, transfer printing, laser labeling, and buckle installation. The specific parameters: (1) Equipment input voltage: 220V �± 10%, 50Hz; (2) The equipment has functions such as automatic shell loading, lid opening, assembly of arc extinguishing plates, magnetic guide plates, handle springs, base springs, positioning pins, handles, jump buckles, locks, coil components, iron core components, wiring columns, adjustment screws, arc extinguishing covers, CCD recognition, lid closing, identification of qualified and unqualified products, assembly of cutting processes, online detection, real-time monitoring, component life monitoring, data storage, MES system and ERP system networking, parameter arbitrary formula, smart energy analysis and energy-saving management system, intelligent equipment service big data cloud platform, etc. (3) Theoretical production effeciency: 2 seconds per unit; Daily production of approximately 14400 pieces/8 hours; (4) This device has the function of power-off to save data for 30 days, making it easy to manage production data; (5) This device adopts touch screen operation, has a computer communication interface, and printing function
Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting line Keyword: Miniature Circuit Breaker Automatic Assembly, Miniature Circuit Breaker, Automatic Assembly line, Assembly Machine, Assembly Production Line Product Introduction Basic operation process: ï?¼Loading by AGV robots, printing QR codes based on the product work order issued by the SAP system, and then separating the upper and lower shells. ï?¼Bottom coating of the upper shell: The installation of three components is completed through ten processes, and after each assembly is completed, there is a corresponding installation accuracy testing process to ensure that the assembly is completely qualified. ï?¼Installation of lower shell components, upper and lower shell assembly: A total of 25 processes are used to install 12 components. After each part is assembled, guide pins are used to ensure the upper and lower assembly. After the installation of internal components is completed, the product's on/off function is tested. After passing the test, rivets are installed, pressed again, and the screws are removed. All installations are checked, and after passing the test, they are transferred to the inspection station. ï?¼Unipolar products undergo instantaneous detection, delay detection, cooling tower and other unit inspections, and are then labeled with QR codes and covers before being transferred to the next workstation. ï?¼Multi pole products require 9 steps of multi pole assembly, and after assembly, a second delay is performed to verify the stability and reliability of the product ï?¼Finally, it is transferred to the automatic packaging unit through pressure resistance testing, transfer printing, laser labeling, and buckle installation. The specific parameters: (1) Equipment input voltage: 220V �± 10%, 50Hz; (2) The equipment has functions such as automatic shell loading, lid opening, assembly of arc extinguishing plates, magnetic guide plates, handle springs, base springs, positioning pins, handles, jump buckles, locks, coil components, iron core components, wiring columns, adjustment screws, arc extinguishing covers, CCD recognition, lid closing, identification of qualified and unqualified products, assembly of cutting processes, online detection, real-time monitoring, component life monitoring, data storage, MES system and ERP system networking, parameter arbitrary formula, smart energy analysis and energy-saving management system, intelligent equipment service big data cloud platform, etc. (3) Theoretical production effeciency: 2 seconds per unit; Daily production of approximately 14400 pieces/8 hours; (4) This device has the function of power-off to save data for 30 days, making it easy to manage production data; (5) This device adopts touch screen operation, has a computer communication interface, and printing function
