Poylimide adhesive tape Polyimide adhesive tapes specifications: Sizethickness 1mil-5mil, width10-520mm, length 33m 1. Physical and mechanical performances A. Adhesive strength(n/25mm): 6.2 B. Elongation: 55% C. Tensile strength: 115mpa 3) dielectric performance A. Insulation grade: h(at 200f¦) B. Break-down voltage(kv): 7(at 200f¦) C. Insulation resistance 1x106 (at 200f¦) Rolls in carton with plastic foam liner
Polyimide tape, esd polyimide tape, polyester tape, esd polyester tape, glass cloth tape, electronic tape, silicone tape.
Corona resistance polyimide films ,not only with ordinary polyimide film electrical properties, good heat resistance and resistance chemicals, but also with the super corona resistance and good thermal conductivity performance, mainly apply to sintering electromagnetic winding wire ,traction motor, wind generators, and the special motor turn-to-turn insulation and heat insulation, the heat resistance level is a class C. The technical requirements: 1. Type CR type: Corona resistance polyimide film without any coating FCR type: Corona resistance polyimide film with F46 single side coating FCRF type: Corona resistance polyimide film with F46 double side coating 2. Appearance its appearance is golden brown, translucent, the surface is bright and clean, no wrinkles, tear, particles, bubble, pinhole and foreign material defects. Its edge is tidy, and without damage. 3. Thickness and allowable deviation Model CR type FCR type FCRF type Thickness(um) 25 38 50 Allowable deviation(um) 2 3 3 Note: coating thickness may be based on customer demand in 5 ~ 12.5 um range regulation. 4. Width and allowable deviation Width may cut according to the customer request within 600 -1050 mm. Each volume length is for 500-1000 m; Each volume joints for final product are not more than three, the proportion of volumes with joints vs the total volumes number in the one order is not more than 25%,the shortest length is more than 300 m; Single plate or roll products joint numbers are not more than three, the shortest length is more than 300 m. FCR type and FCRF type using thermal bonding lap. 5. Film marks: -Every single volume label marked: batch number, specification, net weight;Every single plate or roll labeling: specification. -Package should have obvious and firm mark; -The format of the packing cases is confirmed by purchase order related terms. Serial Number Type CR FCR FCRF 1 Corona resistance life (h) 1 KV voltage, frequency 20 KHz temperature 90 2 pulse rise time 400 ns Y80 Y80 Y80 2 Industrial frequency electric intensity (v/um) Y200 Y120 Y100 3 Surface resistivity 1X1014 1X1014 1X1014 4 Volume resistivity 1 1X1010 1X1010 1X1010 5 Relative permittivity (48-62 Hz ac) 3.2 0.4 3.2 0.4 3.2 0.4 6 Dielectric power factor (48-62 Hz ac) 13.5X10-3 13.5X10-3 13.5X10-3 7 Tensile strength (Mpa) : Y135 Y80 Y80 8 Elongation at break (%) Y40 Y40 Y40. 1. Testing method: According to the ICE62068-1-2003/ GB /T13542.6-2006 "electrical insulation, part 6," Polyimide film for electrical insulation regulation experimental method. 2. Film packaging: Film roll with plastic film packaging, outer with shockproof foam cushion packaging, and support in place in the package overhead, make the film in the transportation conditions often get fully protected without damage, each volume end article sticker marking. 3. Dust is strictly prohibited in the packing box internal. 4. Film should be stored in a dry and clean indoor, film roll to be supported in the box, placed suspended and not be erected. It should not be close to the fire, central heating or exposed to direct sunlight. 5. Products should avoid damp and mechanical damage in the storage and transport. 6. Film storage period is for two years after COA issued date. Expired films are still available after again qualified according to the product standards inspection.
Polyimide film Thickness:0.025mm~ 0.075mm Width: 16mm~660mm Length: any with in 1000m 1 roll / Wooden case
Bopp self adhesive tapes, customized printing tapes, masking tapes and jumbo rolls, box strapping rolls hsn 20201011.
Mayler tape, polyimide tape, copper foil tape, vhb tape.
Adhesive tapes packaging tapes protection tapes/surface protection guard film masking tapes paper a4 ccopy paper kraft white/brown paper rolls/sheets paper tapes warning films/tapes oem: printed with design & logo.
Description: HN Polyimide Film has the excellent balance of electrical, thermal, mechanical, physical, and chemical properties over a wide range of temperatures as low as C269C and as high as 400C. Application: HN Polyimide Film can be used in a variety of electrical and electronic insulation applications: wire and cable tapes, formed coil insulation, substrates for flexible printed circuits (FPC), motor slot liners, magnet wire insulation, transformer and capacitor insulation, magnetic and pressure-sensitive tapes, and tubing. Size: Film Thickness: 0.013mm, 0.025mm, 0.040mm 0.05mm, 0.075mm, 0.100mm, 0.125mm, 0.150mm, 0.175mm, 0.200, 0.225mm. Film Width: 6mm to 1040mm Special thickness or width can be supplied according to customer. Rolls: 3 inch Core, max.width 1040mm Tapes: from 6mm width upwards Packing: approx.28kgs per roll in carton. Special size can be supplied according to customer.
Glass cloth tape, polyester tape, polyimide tape, teflon glass cloth tape, plating tape, masking tape.
Insulation materials, kapton (polyimide tape), polyimide film, seamless polyimide tube, spiral wound polyimide tube, pet tape, ESD polyimide tape, pet screen protector.
Polyimide film tape, PTFE tape, PTFE glass cloth tape, polyester film tape, polyester silicone adhesive tape, glass cloth tape, acetate cloth tape, aluminum foil tape, filament tape, duct tape, cloth tape, pipe wrapping tape, double sided cloth tape, double sided tissue tape, double sided pet tape, plasma spray masking tape, copper foil tape, conductive fabric tape, crepe paper masking tape, washi paper masking tape, high temperature masking tape, EMI shielding tape, rfi shielding tape, sand blasting masking tape, general purpose double sided tape, nameplate fixing tape, carpet joining tape, high adhesion tape, high tensile strength tape, strong tape, bundling tape, packaging tape, thermal insulation tape, heat insulation tape, water-proof tape, external wall insulation tape, high tensile strength insulation tape, class H insulation tape, powder coating tape, electroplating masking tape, wiring harness tape, anti-corrosion tape, adhesion resistance tape, PI tape, golden finger tape.Die-cutting, aluminum foil tape die-cutting, copper foil tape die-cutting, foam tape die-cutting, conductive fabric tape die-cutting, crepe paper tape die-cutting, polyimide film tape die-cutting
Proffessional Black Matte Non Reflective Cloth Stage Tape Gaffer Tape Descriptions: Gaffer tape is a matt gaffer tape specially designed for the arts and entertainment industry. It consists of a PE coated woven PET fabric backing coated with a pressure sensitive natural rubber adhesive. It is the ideal solution for a wide range of applications whenever a non-reflective surface is important. Features: light-absorbing, non-reflective good adhesion, even on rough surfaces abrasion resistant water repellent conformable easy to remove available in matt black, matt white, and matt silver Applications: On-stage/back-stage jobs in theatre, opera, cinema and music halls Fixing of cables on carpets, walls etc. Covering of shiny and glossy surfaces Fixing of cable links Sealing of joints Floor marking and fixing
Self Adhesive Closed Cell EPDM Foam Tape Descriptions: EPDM foam EPDM foam has excellent resistance to both water and sunlight. It has many of the same characteristics as NPVC foam in terms of look, feel, function, and durability. In fact, while EPDM grips are frequently requested, most applications can be more cost effectively satisfied with NPVC. EPDM foam tape is using EPDM foam as backing material and coated with one sided or two sided different kinds of adhesives. Features: Outstanding heat,ozone,and weather resistance. The resistance to polar substances and steam are also good. Excellent electrical insulating properties. Good resistance to ketones, ordinary diluted acids, and alkalines. Compatibility with fireproof hydraulic fluids, ketones, hot and cold water, and alkalis. Applications: For sealant and die cutting Vehicles, used in door seals, window seals, trunk seals, and sometimes hood seals. For die cut, cushioning, shockproof and sealing For pipeline wrapping for air conditions, auto trim attachment, door sealing strips, etc Used in glass-run channels, radiators, garden and appliance hose, tubing, pond liners, washers, belts, electrical insulation, vibrators, O-rings, solar panel heat collectors, and speaker cone surrounds
Manufacturer Die Cut Double sided PU/EPDM/Sponge/EVA CR Foam Tape CR/EPDM Foam Tape belonging to excellent overall performance rubber, which itself has flame retardant properties, also has oil resistance properties. High density, good elasticity. CR foam tape is CR foam one sided or two sided coated with adhesive CR/EPDM Foam Tape Features: Independent holes, closed bubble, sealing resistance, low water absorption. Outstanding flame retardant from the fire that is self-extinguishing, to UL96 HF-VO level, into carbon fast, good weather resistance. Cell delicate, good resilient, cushioning, thermal insulation, sound insulation, good sealing, shock effect is superior. CR/EPDM Foam Tape Applications: Precision machinery, medical equipment, furniture, glass cushioning protection. Vehicles, ships, doors, baggage window seal. Air-conditioning, refrigeration equipment insulation, insulation. Civil construction waterproofing. Machinery and equipment, residential soundproof wall sealed, moisture, and shock. OEM Size: Special length, thickness or combinations can be supplied per customer's request. Products can be supplied in roll, tape, sheets or shapes per customer's request. Only you provide the CAD drawing, we can die cut any size for you. Shelf Life: To obtain best performance, use this product within 12 months from date of delivery and store under normal conditions of 60 ºC to 80ºF (16 ºC to 27ºC) and 40 to 60% R.H. in the original carton.
Descriptions: Double aluminum foil tape is as a smooth aluminum (purity is 99.95%) foil that also has an adhesive coating, but this adhesive coating is conductive. The unplated aluminum foil with conductive adhesive is a common EMI shielding tape for non-corrosive conditions. Features: Good viscosity, Cold resistance Mechanical resistance, Moisture resistant High heat and electric conductivity Excellent ductility and corrosion resistance Flame retardant Easy to tear apart Applications: Electric and electric springs, switches Lead frames Connectors and oscillation reeds Battery Communication cable Cable armoring Mobile phone main board Ion battery production lamination with PI film PCB collector (electrode backing) materials
Descriptions: Thermal conductive glue is made of an advanced thermal conductive pressure sensitive adhesive.Xinst-P80XXN series provides a better way for applications requiring good adhesion strength and superior thermal conductive efficiency. Xinst-P80XXN series is suitable to apply to electronic mechanical components assembly such as the heat sink module and LED light bar module to provide a better heat-transfer path between heat-generating components and heat sink or other cooling devices. Features: Complete thickness standard is available. Various structures are for different applications. Stable and economic. Superior adhesion strength and thermal conductive efficiency. Applications: Assembly of the heat sink and DDR-RAM module. Assembly of the LED light bar module and metal frame bezel. Die-cut piece and Laminate. Applied to the chip, flexible circuit boards and high-power transistors and heat sinks or other cooling device bonding.