Cr Foam Tape

1"x1"x13' Sealant CR single sided foam tape insulation
Single sided CR foam tape

DESCRIPTION
CR (Neoprene) foam tape provides an excellent seal with good durability. They are less expensive than EPDM Foams. And it provides a good seal against outside elements including moisture. We can make it grid fiber adhesive as well. CR foam tape has very good weather resistance and holding power. It is popular on boat industrial; and other constructer region. Customers requests are available.


APPLICATIONS
1,As PE foam and EVA foam are weak in some conditions, CR is the suitable alternative foam tape on the special region and area.
2,assemble and fix the spare in car, air-condition, refrigerator, house hold application.
3, proofing sound, resisting shock in the areas such as construction region.


FEATURES
1, water proof.
2, excellent holding power; peel strength and initial adhesion.
3, anti shock, sound proof, heat and humidity resistance.
4, superior stick capabilities to different surfaces such as: metal; plastic; paper; wooden and silicon.
5, it is easy to cut; slit and Joint. Pretty look.




APPLY DERECTION::
1, all surfaces to be attached must be free of dust, dirt, oil, and moisture. (Apply organic solvent to clean surface if necessary.)
2, started from one side of the surface, press the adhesive side of tape firmly in place(leave backing paper on to prevent stretching).
3, remove backing paper.

CR FOAM DENSITY75-220KG
ELOGATION150%
HOLDING POWER1960G/25MM
INITIAL TACK25#
PEEL ADHESION80G/50MM
HEAT RESISTANCE120


DIMENSION AVALIABLE

Slit goods thicknesswidthlength
1-50mm3mm-1500mm5m-50m
Log roll1-50mm3mm-1500mm300m
linerWhite paper; yellow paper
Other requests please contact me.



STORAGE:
1, keep dry.
2, away from heat; shining and rain.

Self Adhesive Closed Cell EPDM Foam Tape
Descriptions:
EPDM foam EPDM foam has excellent resistance to both water and sunlight. It has many of the same characteristics as NPVC foam in terms of look, feel, function, and durability. In fact, while EPDM grips are frequently requested, most applications can be more cost effectively satisfied with NPVC.
EPDM foam tape is using EPDM foam as backing material and coated with one sided or two sided different kinds of adhesives.

Features:
Outstanding heat,ozone,and weather resistance.
The resistance to polar substances and steam are also good.
Excellent electrical insulating properties.
Good resistance to ketones, ordinary diluted acids, and alkalines.
Compatibility with fireproof hydraulic fluids, ketones, hot and cold water, and alkalis.

Applications:
For sealant and die cutting
Vehicles, used in door seals, window seals, trunk seals, and sometimes hood seals.
For die cut, cushioning, shockproof and sealing
For pipeline wrapping for air conditions, auto trim attachment, door sealing strips, etc
Used in glass-run channels, radiators, garden and appliance hose, tubing, pond liners, washers, belts, electrical insulation, vibrators, O-rings, solar panel heat collectors, and speaker cone surrounds

No Residue Removable Foam Double Sided Tape
Descriptions:
Removable foam double sided tape is use imported PU glue raw materials, one side(Permanent sided) stick strong PET film double-sided adhesive for fixing paste, the other side(Removable sided) for attaching your phone, can repeatedly paste, without leaving any traces.

Features:
Water resistance: non-absorbent, moisture-proof, water-resistant
Permanent sided works well with plastics.
Removable sided leaves no residue, can reused more than 200 times.
Removable side can be washing when it is dirty.

Applications:
Apply to plastic, wood, leather, glass, aluminum alloy, ceramic tile, marble, metal, cement and other materials
Hook tape for use in the daily life, such as plastic, clothes hook in the bathroom, towel, PSP, tablet computer protection fixed, automobile anti-skid stop slippery mat, 3 d mouse pad, etc

DESCRIPTION
PVC foam tapes have a closed cell construction and may be manufactured in many different densities, from soft to firm. It forms a good seal against light, dust, and noise. Double sided PVC foam glazing tape is very popular all over the world for its excellent quality. It is your best choice. They are resistant to chemicals and water and fluid absorption. Customersâ?? requests are available.

APPLICATIONS
1,As windows and doors are often very prone to heat loss, foam tape may offer a very good investment for those who are experiencing higher energy bills.
2,assemble and fix the ware, spare in car, air-condition, refrigerator, house hold application.
3, proofing sound, resisting shock in the areas such as construction region.

FEATURES
1, water proo
2, excellent holding power; peel strength and initial adhesion.
3, anti shock, sound proof, heat and humidity resistance.
4, superior stick capabilities to different surfaces such as: metal; plastic; paper; wooden and silicon.
5, it is easy to cut; slit and Joint. Pretty look.

STRUCTURE APPLY DERECTION::
1, all surfaces to be attached must be free of dust, dirt, oil, and moisture. (Apply organic solvent to clean surface if necessary.)

2, started from one side of the surface, press the adhesive side of tape firmly in place(leave backing paper on to prevent stretching).

3, remove backing paper.

Double sided PE foam tape

DESCRIPTION
PE (Polyethylene) foam tape is made by cross linked PE foam. It offers high tack, excellent shear and aggressive bonding strength. We are now offering paper and poly liners. The products offer great conformability and adhesion to irregular or uneven surfaces. It also offers immediate quick stick. Customers requests is available.

APPLICATIONS
1,As windows and doors are often very prone to heat loss, foam tape may offer a very good investment for those who are experiencing higher energy bills.
2,assemble and fix the ware, spare in car, air-condition, refrigerator, house hold application.
3, proofing sound, resisting shock in the areas such as construction region.


FEATURES
1, water proo
2, excellent holding power; peel strength and initial adhesion.
3, anti shock, sound proof, heat and humidity resistance.
4, superior stick capabilities to different surfaces such as: metal; plastic; paper; wooden and silicon.
5, it is easy to cut; slit and Joint for the pretty outlook.






STRUCTURE APPLY DERECTION::
1, all surfaces to be attached must be free of dust, dirt, oil, and moisture. (Apply organic solvent to clean surface if necessary.)

2, started from one side of the surface, press the adhesive side of tape firmly in place(leave backing paper on to prevent stretching).

3, remove backing paper.




PE FOAM DENSITY30-350KG
ELOGATION210%
HOLDING POWER1960G/25MM
INITIAL TACK21#
PEEL ADHESION80G/50MM
HEAT RESISTANCE120â??


DIMENSION AVALIABLE
Slit goods thicknesswidthlength
0.2-50mm3mm-1500mm5m-50m
Log roll0.2-50mm3mm-1500mm300m
linerWhite film, Red film, Green film, Blue film, White paper, Yellow paper
Other requests please contact me.





STORAGE:
1, keep dry.
2, away from heat; shining and rain.

Introduction:
Double sided PE foam tape is coated with a strong sticky acrylic adhesive in the foam substrate on both sides, and then one side covered with a release paper or release film, with a strong adhesive force, to maintain a good waterproof performance, high temperature resistance, anti-UV ability features. The foam substrate is divided into: EVA foam, PE foam, PU foam, acrylic foam and high foam. The glue department divided into: Oil glue, hot sol, rubber and acrylic adhesive.

Double Sided PE Foam Tape Replace 3M PE Foam Tape
Basic Info
Model NO.:XINST29XX Type:Adhesive Tape
Efficacy (For Tape):Double Sided Tape Label Material:PE Foam
Surface Materials (For Adhesive):PE Foam Surface Material:PE Foam
Adhesive (For Label):No Technics:No
Membrane-type (For Adhesive):PE Foam Backing Paper (For Adhesive):Polyethylene
Color:White/Black

Application:
Double Sided PE Foam Tape Mainly used in automotive interior and exterior components, signs, nameplates and other fixing and bonding.

Key Specifications/Special Features:
OEM designs/services offered
Exquisite appearance and fashionable widely use
Acrylic foam as the substrate, two-sided soaking altered acrylic adhesives
Has strong adhesive force, excellent shock absorption properties and anti-cracking
High temperature-resistant to anti-solvent, anti-plasticizer and good sealing
Top grade VHB foam tape application
Widely used in automotive interior parts, door trim, rain gear, paste the fixed signs, home appliances, decoration, curtain wall structural adhesive fixed
Auto trim, auto glass, auto pedal, seals, surfers, round arc, block flow, plate brake light
Down at the car fixed plate bonding

Features: exceptionally strong adhesive, waterproof and car signs
Thickness: 1-3mm
Length: available as customer's requirements
Width: available as customer's requirements
Packing: shrink film, common carton/box packed
Adhesive power (to stainless steel): 3000gf/25mm
Initial adhesive (steel ball test): 13 ball no
Holding power (to stainless steel): 72 hours
Tensile strength: 18kgf/25mm
Temperature resistant: 20 to 60&176Dg

Shockproof Sponge PORON Foam Tape Sheet
Descriptions:
PORON is a fine pitch open cell urethane foam produced by Rogers Corporation.The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water exposure. The average cell size of PORON foam is approximately 100 microns.
PORON cellular urethane foam was engineered to have excellent memory (compression set resistance). The compression set resistance of PORON makes it a top pick for sealing and cushioning electronics.
PORON urethane foam is manufactured by continuously casting and curing mechanically mixed formulas to the desired thickness.
PORON foam tape is using PORON foam as backing material and coated with one side or two sided different kinds of adhesives.


Features:
Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required.
Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices.
Consistent microcellular structure - Fine and consistent open cells make PORON microcellular urethane an ideal dust gasket material, suitable for many cleanroom applications.
Adhesive backings - PORON readily accepts most of pressure sensitive adhesive offerings. Since PORON does not contain any plasticizers, it does not reduce adhesive shelf-life. The integral skin surface provides a clean, readily bonded surface.
Thickness options - PORON is available in a wide range of thicknesses. Offers bonded layers to achieve non-standard thicknesses and stacked/bonded assemblies.
Smooth skin - Most grades of PORON foam are manufactured with a smooth skin on both sides. The supported products have a 1 mil PET film bonded permanently to one side.

Applications:
Provide sealing and cushioning in thin displays, medical devices, electronic enclosures, and automotive and industrial applications.
For Sealing, Gasketing, and Cushioning.

OEM Size: Special length, thickness or combinations can be supplied per customer's request. Products can be supplied in roll, tape, sheets or shapes per customer's request. Only you provide the CAD drawing, we can die cut any size for you.
Shelf Life: To obtain best performance, use this product within 12 months from date of delivery and store under normal conditions of 60 C to 80F (16 C to 27C) and 40 to 60% R.H. in the original carton.

PE Foam Double Sided Tape For Mirror Mounting

Descriptions:
PE foam double sided tape is polyethylene foam double sided coated with acrylic adhesive, range provides solutions to practically every industry for bonding, mounting, fixing and joining applications. The products are economical, easy and quick to apply, clean to use, adaptable, versatile and consistent.

Features:
No residue, easy to control the interface
Strong adhension, double-stick and anti-crack
Good wather resisitance,heat resisitance and anti-chemicals ect
Durable and accmodated irregular surface
Good isolation and buffering

Applications:
Widely used for flexible conjunction of furniture, construction and decoration.
Automobile foam tape usually used on rough and uneven surface: sticking signboard, mirror, map etc.
Protecting the glass board and packing electric accessories for eliminating noise and reducing vibration function