Applications: Designed for Ethernet device not to be spoiled by lightning over-voltage, induced over-voltage and static discharge. CAT6, CAT5e and CAT5 compatible 10/100/1000 Base-T Gigabit Ethernet protection LAN, FDDI, CDDI, ATM PDH, SDH, SPDH Industrial control Features: Multi. Protection circuits, Gas-Tube+ TVS technology Dual protection in Common module and different module TVS array technology, low capacitance Multi-Strike Capability Specifications: TypeD05J4D05J8HD12Y4D36Y2 Electrical Specifications Max operating voltage5V5V12V36V Nominal discharge current (8/20»s)3kA2kA3kA3kA Max. discharge Current (8/20»s)5kA3kA5kA5kA Protection level (3kA 8/20»s)Line to line25V25V40V60V Line to PE160V Adapt transmission rate100Mbps1000Mbps10Mbps10Mbps Insertion Loss_0.5dB Response time _5ns Mechanical Specifications ConnectorRJ45 Protection Lines 1,2 & 3,61,2,3,4,5,6,7,84 lines2 lines Form Size(mm)83 * 25 * 25 90 * 14 * 63 Working environments Operating Temperature Minimum-40 Operating Temperature Maximum85 Operating Humidity95%
Size: 805039 L: 35H(Min)
Introduction The ARNS series stainless steel lined PTFE filter housing takes high-strength SUS304 as its body, all components inside are made of PTFE material, and all parts in contact with the liquid are lined with PTFE sheet. The product has excellent resistance to strong corrosion and high temperature and pressure, ensuring stable use in various special production environments. Specification Material: SUS304+PTFE Filter type: Liquid Length: 5" ~ 40" Filter specification: Single core or multi-core Application Suitable for chemical solvents, electronic chemicals, ultra-high purity solvents and other strong corrosive liquid filtration.
The DAA1 power line noise filter is a general-purpose single-phase single-pole filter.This series of power line noise filters uses inductors, capacitors, filters and other components to filter the power line. By blocking high-frequency current on the power line, it reduces the spread of electromagnetic interference, effectively protects electronic equipment, and provides clean , the purpose of stable power supply. Features Rated current up to 10A A variety of connection methods to choose from, such as power cords and plug-ins Optional low leakage current version Optional medical version Customized versions of appearance and parameters can be provided on demand Comply with cUL, CE, ROHS, CQC related safety certifications Technical Parameters Product Name:DAA1 power line noise filter Rated Current:1A-10A Rated Voltage:110VAC-250VAC Working Frequency:50/60HZ Temperature Range:-25 ~85 Withstand Test Voltage:1500VDC(line/line) 2150VAC(line/ground) Fire Resistance UL 94V-0 Overall Dimension (±1mm) power line noise filter Circuit Diagram Approvals and Compliances power line noise filter power line noise filter DOREXS offers more power line noise filter options, please contact us.
Detailed Product Description Especially designed for household electric appliances. With a compact structure, high security and reliable. With a good price/performance ratio. Rated current: 1A-50A according to the part no.
Filter with RJ11 connectors to remove ADSL signals from the ADSL modens. 100 units/ 10Kg
Our air filter is mainly made with foam air filter,aluminium frame,aluminium honeycomb and aluminium mesh. And our foam air filter reaches the UL standards,the flame retardant Grades is UL94V0.Our air filters comply with ROHS standards. Our air filters are widely used in ventilation opening of electrical equipments,electronic equipments,communication cabinets and other equipment,the air filter can filter and deadening effectively the dust in the air.
Our air filter is mainly made with foam air filter,aluminium frame,aluminium honeycomb and aluminium mesh. And our foam air filter reaches the UL standards,the flame retardant Grades is UL94V0.Our air filters comply with ROHS standards. Our air filters are widely used in ventilation opening of electrical equipments,electronic equipments,communication cabinets and other equipment,the air filter can filter and deadening effectively the dust in the air.
Our foam air filter is made by soft polyurethane and the pores exceed 97% of the total space in the material,so our foam air filter has good permeability,it can filter and deadening effectively the dust in the air. The most important is our foam air filter reaches the UL standards,the flame retardant Grades is UL94V0.And our foames comply with ROHS standards. Our pore size of foam air filter:10PPI,15PPI,20PPI,25PPI,30PPI,35PPI,40PPI,45PPI,50PPI,55PPI,60PPI.The colour is black,or we can produce according to our customer requirements.We also produce the foam air filters according to the drawings. Our foam air filters are widely used in air filter industries and air purification industries like electrical appliances,electronic products,various types of computer boxes,switching cabinets and other areas.
Our foam air filter is made by soft polyurethane and the pores exceed 97% of the total space in the material, so our foam air filter has good permeability, it can filter and deadening effectively the dust in the air. The most important is our foam air filter reaches the ul standards, the flame retardant grades is ul94v0.And our foames comply with rohs standards. Our pore size of foam air filter:10ppi, 15ppi, 20ppi, 25ppi, 30ppi, 35ppi, 40ppi, 45ppi, 50ppi, 55ppi, 60ppi.The colour is black, or we can produce according to our customer requirements.We also produce the foam air filters according to the drawings. Our foam air filters are widely used in air filter industries and air purification industries like electrical appliances, electronic products, various types of computer boxes, switching cabinets and other areas.
Our air filter is mainly made with foam air filter,aluminium frame,aluminium honeycomb and aluminium mesh. And our foam air filter reaches the UL standards,the flame retardant Grades is UL94V0.Our air filters comply with ROHS standards. Our air filters are widely used in ventilation opening of electrical equipments,electronic equipments,communication cabinets and other equipment,the air filter can filter and deadening effectively the dust in the air.
Emi & emc filters, dc emi filter for photo voltaic inverters dc feedthrough filter, military grade filter, data line filter for ethernet filter with poe.
Made of 100% Natural Combed Cotton With Spun Bonded Filters Amazing Grace Masks are made of fine natural fiber of 100% Combed Cotton Ring-Spun Fabric with 100% Polyethylene Spun Bonded Filters. This quadruple-layer Combed Cotton Masks reinforced with Spun Bonded Filters are very soft and comfortable to wear and provide protection from Air Pollution, Dust, Pollen, Microorganism and Harmful Substances in the air. Size Adjustable Amazing Grace Masks are made to fit your face contour. You may freely change and adjust the size length to protect you efficiently and to fit you comfortably. Quadruple Layers for Quadruple Protection Amazing Grace�® Masks are made of Quadruple Layers. First Layer - 100% Natural Combed Cotton Ring-spun fabric is the first line of defense. Second Layer - 100% Polyethylene Spun Bonded non-woven filter is the second line of defense. Third Layer - Another 100% Polyethylene Spun Bonded non-woven filter is the third line of defense. Fourth Layer - 100% natural Combed Cotton Ring-spun fabric (White) is your fourth defense line and it is soft, non-abrasive layer that makes you feel comfortable on your face. Reusable Amazing Grac Masks are Reusable after Sterilization with Disinfectant Spray and/or Ultraviolet (UV) Sterilization (Available to buy "Click Here")and/or after Washing (Hand wash with warm water and mild soap. Do not wring. Hang to dry) Available Fashion Colors Amazing Grace�® Masks are available in 4 different fashionable Reversible Color Combinations: Black/White, White/White, Royal Blue/White, and Orange/White. Manufactured in the Sanitized Environment Amazing Grace Masks are made in a Sanitized Environment Factory in Mexico under USA Technology and Supervision. 4 Pieces Value Pack Amazing Grace�® Masks are packed in an Airtight Packaging Envelope after UV (Ultraviolet) Sterilization Process. It is Safe, Washable, Reusable and Convenient to carry. Satisfaction Guaranteed Amazing Grace Masks is Registered Trademark and Client's Satisfaction is Guaranteed by; Amazing Grace Health & Beauty LLC 158 Linwood Plaza Ste. 315 Fort Lee, New Jersey 07024 USA Email: info@amazinggracemask.com Product Details Fabric:100% Combed Cotton Filter: 100% Polyethylene Spun Bonded Size: 9 x 5.75 x 0.25 inches (228mm x 146mm x 6mm) Net Weight Per Piece: 0.50 Ounces (14g) Shipping Weight 4 Pieces Pack: 1.94 Ounces (55g)
Vertical fold-flat, without exhalation valve Welded elastic earloops Imbedded nose clip, sponge nose lining CE approved by UNIVERSAL (NB no. 2163) Tested and certified according to EN 149:2001+A1:2009 Class: FFP3 NR This respirator mask is certified and classified as FFP3 under EU standard EN 149:2001+A1:2009. EN 149:2001+A1:2009 - Respiratory protective devices - Filtering half masks to protect against particles. This European Standard specifies the minimum requirements for filtering half masks used as respiratory protective devices, specifically against particles, and the required laboratory and practical performance tests to assess masks' compliance. EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols. FFP3 masks have a minimum of 99% filtration percentage and maximum 2% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.
Vertical fold-flat, without exhalation valve Welded elastic earloops Imbedded nose clip, sponge nose lining CE approved by UNIVERSAL (NB no. 2163) Tested and certified according to EN 149:2001+A1:2009 Class: FFP3 NR This respirator mask is certified and classified as FFP3 under EU standard EN 149:2001+A1:2009. EN 149:2001+A1:2009 - Respiratory protective devices - Filtering half masks to protect against particles. This European Standard specifies the minimum requirements for filtering half masks used as respiratory protective devices, specifically against particles, and the required laboratory and practical performance tests to assess masks' compliance. EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols. FFP3 masks have a minimum of 99% filtration percentage and maximum 2% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.
The 80fa flow meter is for permanent flow metering applications. Its modularity offers comprehensive configuration options to make the instrument suitable for everything from simple water flow measurements to energy flow monitoring, automated process control and product recognition. The transmitter electronics are housed in a corrosion-resistant, wall mounted enclosure and can be powered by ac or dc power supplies. By offering a wide range of input, output and communication inferfaces such as rs 485, modbus and relay, the flow meter can easily be connected to process automation systems. Features --real time data transfer --intuitive flow meter menu --heat measurement function optional --easy installation and operation --measuring temperature from 0-160 c (32 to 320 f) --ex-enclosure provided --powed by either ac & dc Specifications Flow element Working power supply: ac220v/dc8~36v Accuracy: ¡¨¹1% Max. Flow velocity: 10m/s Measuring period: 500ms (2 times per second, and 128 groups of data collected at each cycle ) Display: 10 digits, 2 lines characters displayed on the same screen Operation: 2*8 keyboard Signal output: 1 way isolated rs485 1 way isolated rs485 1 way oct Signal input: 3 way 4-20ma 2 way pt100 resistor Communication protocol:modbus protocol, fuji extension protocol Installation:external application installation Protection:transducer ip 68, mainframe ip 65 Ex-proof:exd ii bt 4 Carton package, size 41*30*15cm, weight 4kg
Cable Standard Generally conforms to, Based on IS:9857-1990 VDE 0282, IEC 245-6, BS 6899 Silent Features - Ultra high performance flexible welding lead, double insulated for longer life and added safety - Better flame retardant properties - Outstanding toughness & durability - High resistance to cuts, tears & abrasion - Resistance to oil, solvents and chemicals - Excellent ozone and weather resistant Technical Data Fixed Installation : -20C to max.+90C Nominal Voltage : 600 V Spark Test : 3.5 KV(ac) Color : Orange / Black Jacket Min. Bending Radius : 6 x Cable Diameter Standard Packing Coils 100, 200, 300 and 500m Conductor High conductivity, bare annealed copper flexible conductor, EC copper class 5 & class 6 generally conforms to IS:8130-1984, IEC 60228 Separation Polyester tape Insulation Double Insulated/single insulated flexible Nitrile rubber HOFR insulated as per IS:6380-1984 Color Orange / Black Jacket Current Rating The maximum current ratings of flexible welding cables for different duly cycles are based on an ambient air temperature of 25 C and a maximum conductor temperature of 90 C. The percentage duly cycles for various processes and applications are as follows: - Automobile Welding : up to 100% - Semi Automatic Welding : 30% to 85% - Manual Welding : 0% to 60% - Very intermittent or Occasional Welding : up to 20% Voltage Drop When total cable lengths in excess of 15mtr., are involved, it may be necessary to use cables of larger cross section to ensure that the voltage drop is not excessive & welding currents are maintained at adequate levels. Application Designed for the secondary (high current) connection to automatic or hand - held metal arc welding electrodes. It is suitable for flexible use under rugged conditions, on assembly lines & conveyor systems, in machine tool and automatically operated line & spot welding machines
Fully-automatic FFP2/FFP3 Mask Making Machine | Respirator Production Line It is a high-quality fully-automatic FFP2/FFP3 mask production line we launched by working with a German company. This mask making machine for producing FFP2/FFP3 face masks. Protective face mask in GB2626, EN149 and OSHA standards is called particulate respirator. The machine makes 4-to-6-ply respirators/masks automatically by the following procedures. 1) Unwinding and feeding fabrics 2) Welding and laminating fabrics 3) Feeding and positioning nosepieces 4) Feeding and welding earloops 5) Folding face masks 6) Cutting the face masks The above process is done automatically and continuously by PLC. Features: 1) Fully-automatic. 2) High-speed and speed adjustable. 3) Multiple ultrasonic systems employed produce reliable welding. 4) Easy to use. The touch-screen control system makes operation easy. 5) Alarm when the fed material breaks or is in short. 6) A counting system makes the quantity of produced masks visible and make it possible to set the mask quantity of each stack for the conveyors. Specifications: Power supply: 14 kW Running power: 2.5 kW Capacity: max. 50 pcs/min Weight: 2000 kg Dimensions: 9800(L)*1335(W)* 2008 (H)mm Site level: class 100000 cleanroom Compressed air: 6 bar, pre-filtered, 23L/min Fold symmetry: ±2mm
Electrical Characteristics - Rated Voltage : 0.6/1 kV AC - Rated DC Voltage : 1.5 kV - Maximum Permitted DC Voltage : 1.8 kV (conductor/conductor, non earthen system, circuit not under load) - Maximum Permitted AC Voltage : 1 KV - Working Voltage : DC 1000 V - Spark Test : 6000 V. ac (8400 Vdc) - Voltage Withstand : 6500 V as per EN50395 for 5 min - Ampacity : According to requirements for cables for PV systems Technical Data - Ambient Temperature : -40C +90C - Minimum Bending Radius : 5 x OD (fixed), 15 x OD (occasional flexing) - Flame retardant according to IEC 60332-1-2 - Low smoke emission < 20% as per ASTM D-2843 - Halogen free according to EN 50267-2-1/-2, IEC 60754-2 - Maximum Temperature at Conductor : 120C (20000h) - Short Circuit Temperature : 200�?�°C (at conductor max. 5sec) - Thermal Endurance Test : According to EN 60216-2 (temperature index +120C) - High Temperature Pressure : Test according to EN 60811-3-1 - Excellent mechanical and electrical properties. - UV resistance & OZONE resistance - Flexibility & suitability for fast & easy installation Cable Standard EN 50618 Standard Packing Coils 100, 200,300, 500, 1000m Conductor Flexible Electrolytic fine Tinned copper class-5 conductor according to IEC 60228 Insulation XLPO (Crosslinked Halogen Free & Flame Retardant) Sheath XLPO (Crosslinked Halogen Free & Flame Retardant) Color Red, Black and also available black color with red lining. Application For Solar Panel, Solar Power Plant, Solar Pump Installation.
Glass lined filter Cleaning, dissolution and filtration can be completed in this unit, and agitator can be mounted on top of this unit according to the requirement of the chemical process. With aborative operation and maintenance, the bottom cover can be easily opened and closed for discharge and replacement of the filtration cloth. Non-package iron or wooden pedestal, suitable for inland or marine transportation, split flanges are provided for all glass lined nozzles and gl nozzles are protected with blind flanges.
