Data Line Protectors

Flat Cable
M&P is able to support a full line of flat cable and flat ribbon cable for electronic applications. Providing both power and data transmissions, flat cables are mainly used for internal connections within the equipment. They are available in a wide range of configurations to accommodate different connection and data transmission requirements and the range of sizes of the equipment using the cables. Flat cables provide consistent performance due to their layout and the spacing between the cables and are lighter, thinner and more flexible than other cables.

Features of Our Flat Cables & Wire
* Flat, ribbon and twisted configurations, with different levels of flexibility.
* Shielded or jacketed cable to reduce signal interference.
* Range of pitches and pin configurations to accommodate the application requirements.
* Easy to fasten with clamps, adhesive, and tape.

We provide custom services, including marking, kitting and custom cable design to provide you with a custom solution for your cabling application. Contact us to find out more about Flat Cables and Wires.

Cable Standard
Generally conforms to, Based on IS:9857-1990 VDE 0282,
IEC 245-6, BS 6899

Silent Features
- Ultra high performance flexible welding lead, double insulated
for longer life and added safety
- Better flame retardant properties
- Outstanding toughness & durability
- High resistance to cuts, tears & abrasion
- Resistance to oil, solvents and chemicals
- Excellent ozone and weather resistant

Technical Data
Fixed Installation : -20C to max.+90C
Nominal Voltage : 600 V
Spark Test : 3.5 KV(ac)
Color : Orange / Black Jacket
Min. Bending Radius : 6 x Cable Diameter

Standard Packing
Coils 100, 200, 300 and 500m

Conductor
High conductivity, bare annealed copper flexible
conductor, EC copper class 5 & class 6 generally
conforms to IS:8130-1984, IEC 60228

Separation
Polyester tape

Insulation
Double Insulated/single insulated flexible Nitrile
rubber HOFR insulated as per IS:6380-1984

Color
Orange / Black Jacket

Current Rating
The maximum current ratings of flexible welding cables for different
duly cycles are based on an ambient air temperature of 25 C and a
maximum conductor temperature of 90 C. The percentage duly cycles
for various processes and applications are as follows:
- Automobile Welding : up to 100%
- Semi Automatic Welding : 30% to 85%
- Manual Welding : 0% to 60%
- Very intermittent or Occasional Welding : up to 20%

Voltage Drop
When total cable lengths in excess of 15mtr., are involved, it may be necessary
to use cables of larger cross section to ensure that the voltage drop is not
excessive & welding currents are maintained at adequate levels.

Application
Designed for the secondary (high current) connection to automatic or hand - held metal arc welding electrodes. It is suitable for flexible use
under rugged conditions, on assembly lines & conveyor systems, in machine tool and automatically operated line & spot welding machines

Electrical Characteristics
- Rated Voltage : 0.6/1 kV AC
- Rated DC Voltage : 1.5 kV
- Maximum Permitted DC Voltage : 1.8 kV (conductor/conductor,
non earthen system, circuit not under load)
- Maximum Permitted AC Voltage : 1 KV
- Working Voltage : DC 1000 V
- Spark Test : 6000 V. ac (8400 Vdc)
- Voltage Withstand : 6500 V as per EN50395 for 5 min
- Ampacity : According to requirements for cables for PV systems

Technical Data
- Ambient Temperature : -40C +90C
- Minimum Bending Radius : 5 x OD (fixed), 15 x OD
(occasional flexing)
- Flame retardant according to IEC 60332-1-2
- Low smoke emission < 20% as per ASTM D-2843
- Halogen free according to EN 50267-2-1/-2, IEC 60754-2
- Maximum Temperature at Conductor : 120C (20000h)
- Short Circuit Temperature : 200�?�°C (at conductor max. 5sec)
- Thermal Endurance Test : According to EN 60216-2
(temperature index +120C)
- High Temperature Pressure : Test according to EN 60811-3-1
- Excellent mechanical and electrical properties.
- UV resistance & OZONE resistance
- Flexibility & suitability for fast & easy installation

Cable Standard
EN 50618

Standard Packing
Coils 100, 200,300, 500, 1000m

Conductor
Flexible Electrolytic fine Tinned
copper class-5 conductor according
to IEC 60228

Insulation
XLPO (Crosslinked Halogen Free &
Flame Retardant)

Sheath
XLPO (Crosslinked Halogen Free &
Flame Retardant)

Color
Red, Black and also available black color with red lining.

Application
For Solar Panel, Solar Power Plant,
Solar Pump Installation.

With magnet material very low setup torque reasonable structure, small and light, stable operation, easily installed, high efficient.

Technical data Item 50W-50KW
Rated power 50W-50KW
Rated voltage 12/24/48/96/110/220/380VDC
Gear Box No (Direct Drive)
Generator 3 Phase Permanent Magnet AC Generator
Line to line voltage 0-500V.

With magnet material very low setup torque reasonable structure, small and light, stable operation, easily installed, high efficient.

Technical data Item 50W-50KW
Rated power 50W-50KW
Rated voltage 12/24/48/96/110/220/380VDC
Gear Box No (Direct Drive)
Generator 3 Phase Permanent Magnet AC Generator
Line to line voltage 0-500V.