Glass Lined Filter

Glass lined reactor, jacketed, 50L-80000L capacity, two pieces type (i.e. FK, open type) and one piece type ( i.e. FF, closed type), with good anti-corrosion performance widely to be used in the reaction, neutralization, and polymerization etc process: 1. The detailed assembling of our Glass lined reactor: (1) Electric Motor: Explosion-proof, Ordinary type; (2) Reducer(i.e.gear box): Cycloidal-pin wheel type, Spiral bevel gear type, Helical gear type; (3) Seal type: Packing seal, Mechanical Seal (single type, double type); (4) Agitator: Frame type, Anchor type, Impeller type, Paddle type, combination type; (5) Thermometer Pocket: A type (Straight); B type (Slant), C type ( Slant with Wing); (6) Bottom discharge Valve: Upper extension type, 2. The technical performance of our Glass lined reactor: (1)The working pressure: Inside the vessel: less than or equal to 1.0Mpa (for Packing seal: less than or equal to 0.2Mpa; for Single mechanical seal: less than or equal to 0.4Mpa, for Double mechanical seal: less than or equal to1.0Mpa); Inside the jacket: less than or equal to 0.6Mpa; (2) The working temperature: from -20 degree centigrade to 200 Celsius degree, the cooling shock: 110 Celsius degree, the thermal shock: 120 Celsius degree; (3) The Glass-lining thickness: 0.8-2.0mm; (4) The high Voltage-test to the Glass-lining: 20KV. (5) Nonstick: the smooth and clean glass-lining surface is nonstick to the materials. (6) Anti-corrosion performance: suitable for all kinds of organic or inorganic acids, organic solvents and weak alkaline etc. Besides Glass lined reactor, we also make Glass lined storage tank 200L-50000L, distiller 300L-6000L, condenser and dryer etc, certified by ISO900 and as one world class manufacturer & supplier of Glass lined equipments in china, we promise our products in high quality with favorable price and excellent service, select us, select trust, please contact us for more details, thanks.

Max glass size:1800*2500mm Min glass size:300*500mm Glass thickness:3-12mm Brushes: 3pairs Low-e glass: yes Can make three pcs insulating glass Voltage: 3p380v 50hz Dimension: 15000*2500*2900mm Weight: 2500kg

Its furnace life, energy consumption and product quality keep leading position in china market. Especially the low energy consumption which can save 10% the same cost of furnace, making it the competitive advantage of zgiec over other competitors.Zgiec can design for clients according to their detailed requirements for glass furnace. According to specific equipment conditions

Brief introduction Glass wool is a kind of insulation materials which is made of natural ores, such as quartzite, dolomite, feldspar, limestone and so on. With the features of low density, fireproof, thermal insulation, the glass wool has found a wide utilization in the fields of petrochemical industry, architecture, etc. The capacity of the glass wool production line is 2000-20000 tons per year. The raw material is cullet, feldspar, dolomite, calcined soda, borax, limestone, others. The fuel could natural gas or heavy oil, etc. Production process The glass wool production line is a complete set of machinery. The raw materials added with auxiliary agents such as calcined soda and borax are melted into glass fluid in the tank furnace. The lava is drawn, blown or thrown into very thin fibers under centrifugal force of the spinner. The forming fiber will be collected to be original blanket by wool collecting machine. The original felt is sent into the curing oven to be solidified and shaped by the conveyor. After curing, the products will go through the cooling section. It will be cut by slitting cutter and cross cutter according to the setting length. Finally, it will become the final products such as board, blanket. We could provide a series of service including the project consultancy, technical support, installation and commission, employees training, system maintenance, technology upgrade, etc. we warmly welcome you to visit our company. Equipment introduction Melting system This production line adopts tank furnace which is made up of different refractory materials and uses natural gas as fuel. Fiber forming system Centrifuge could produce glass wool fiber from vitreous fluid. It is the key equipment of the whole production line and decides the quality of the final product. Glass wool collector Glass wool collector could collect fibers into crude felt which is then sent to curing oven via the transition conveyor. Curing oven Curing oven could heat and shape glass wool layers containing binder as per the density, size required for products. It could make binder and fibers polymerize into one, producing glass wool blanket and board. Conveying and cutting machines The conveying machine could convey the cured glass wool products to the cutting system and cool the products at the same time. The cutting system could proceed longitudinal and crossing cutting to make required products. Blanket / felt-rolling machine It could roll the glass wool blanket into rolls and facilitate the packing of product. PE film, Container

Brief Introduction Vertical insulating glass production line is used to make insulating glass. This machine can make double and triple Insulating glass units. The insulating glass production line is the main equipment to produce insulating glass. The machine consists of input unit, glass washing and drying unit, cleanness inspecting unit, aluminum spacer assembly unit, panel pressing unit, tilting table. Input unit conveys glass sheets into washing and drying unit automatically. Washing and drying unit uses 3 pairs of brushes and entire rubber rollers, with hot air system and hot water system, to achieve better cleanness of glass. Cleanness inspecting units equipped with inspecting lights is used to inspect whether the glass is clean or not. Aluminum spacer assembly unit with spacer positioning system is used to load aluminum spacers onto glass sheets. Panel pressing unit with hydraulic driving system can press two sheets of glass with spacer together. Tilting table with universal wheels tilts insulating glass units to horizontal position. Features Automatic PLC Control System in whole manufacturing process, equipped with man-machine interface touch screen Realize the surface layer of coated glass and LOW-E glass automatically The washing unit and water system use stainless steel and anticorrosion material with all parts and it has features of super durability Applicable for washing glass with the thickness of 3 to 12mm, with specially designed automatic glass transport mechanism of washing and drying unit With multistage frequency conversion control and multi-speed revolution optimization function, the machine can process all kinds of glass sheets with different glass size Washing glass continuously, distinguishing the first and the secongd glass sheet automatically Every glass transportation unit uses buffer stopping function to avoid bumping, and effectively reduces the wearing of conveying wheels from glass Capable to make triple or step insulating glass unit (optional) Main Technical Parameter

1. Suitable for gross ribbon width: 2000mm-5400mm 2. Suitable for gross ribbon thickness: 1.5mm-20mm 3. Linear speed of annealing lehr roller: 80-1500m/h (stepless speed variation) 4. Diameter of annealing lehr roller: 216mm-365mm. . Linear speed of annealing lehr roller: 80-1500m/h (stepless speed variation) 4. Diameter of annealing lehr roller: 216mm-365m.

Model glass sheet size sheet weight (Kg) working time(s) max speed(M/min) cutting precision (mm/m) breaking-out bar(pcs) air supply prssure (mpa) dimensions CNC-2621 2440x1830 400

It can grind and polish flat edge with arrises. It adopts mechanical stepless speed adjustment and can be adjusted to suit different thickness glass. Major Technical Specification Speed 0.5-5(m/min) Max. Grinding Amount 3(mm) Glass Thickness 3-25(mm) Min. Glass 80x80(mm) Total Power 22.8(Kw) Dimension 6.6x1.1(M) Weight 2850(kg) Max. Glass 3000x3000(mm)