Size: 9 x 2 3/16 projection Material: stainless steel.
For construction use. Carry film faced plywood. Made of high-grade solid sawn Pine lumber and Pine plywood. Prefabricated wood H 20 Beams are manufactured in a range of sizes. Long lengths use fingerjoining to splice flanges and butt jointing or toothed, tongue and groove or scarf configurations to splice the webs. The actual length is limited only by transportation restrictions Weight per running meter: 5.2-5.8 kg Mechanical specification: Bending moment íºC max.5 kN.m Cutting action íºC max 11.0KN Bending íºC max1/500 Live load (Bending Stiffness) íºC max 500 kN/m2 Length in cm 180 - 245 - 290 - 330 - 360 - 390 - 420 - 450 - 460 - 490 - 590
For construction use, the function is the same as film faced plywood, in various countries, constructions adopt alternative film faced plywood, shuttering plywood, or 3 ply shuttering panels. Three Ply Shuttering Panels are made of 3-plywood with a thickness of 9 mm each ply. The 1st and the 3rd ply grain are arranged at right angles to the second ply. Glueing is made with high temperatures and pressure. The moisture content is less than 13%. Both sides of the panels have a melanimic protection in orange colour and alkaline proof and to avoid humidity. Size: 970 x 500 mm 1000 x 500 mm 1500 x 500 mm 1970 x 500 mm 2000 x 250 mm 2000 x 300 mm 2000 x 500 mm 2000 x 1000 mm 2500 x 500 mm 3000 x 500 mm. 4000 x 500 mm 6000 x 500 mm Thickness: 21mm (3 x 7mm),27mm (3 x 9mm). Glue: WBP (MUF) / E1. Density: 425Kgs/M3. Material: Fir/Abisia. Sanding: Double faced sanded and Coated.
All of the products are made by ourself.
Building material
Dinston manufactures fine quality ornamental gypsum/plaster moldings in glass fibre reinforced gypsum(grg) such as elegant plaster cornice moldings, ceiling roses and domes, and ornament, classical columns, corbels and capitals, pediments, wall niches, fireplace mantels, panel moulding and brackets. 5pcs/bag
Descriptions: Chamotte refractory block is made from high quality calcined fireclays. It is widely used in float glass furnace bottoms and in multi-course furnace bottoms. Its glass contact qualities. Also make it suitable for day tanks and other special glass contact applications. Applications: Chamotte brick is mainly used for furnace and hot blast stove, furnaces of metallurgic, Building material, glass, ferrous metal etc.
Descriptions: Insulation brick is made from high purity refractory clays and other raw materials, with light Weight and mini-porosity well distributed. It has advantages of low thermal conductivity, low Heat storage, high spalling resistance, high hot compressive strength, how iron oxide and Alkali flux content, accurate dimensions. Applications: It is widely used for insulating layer and lining of industrial kilns & furnaces.
Descriptions: Mullite bricks have the properties of high purity, good mechanical strength, high refractoriness under load and low thermal conductivity. Mullite bricks are the best suited for reducing atmospheres and have resistance to slag and alkali attack. It has superior resistance to abrasion and thermal shocks. The effect on energy saving is significant. Applications: It is the ideal to be used as both insulating linings and working linings of high temperature kilns like glass tank furnace, kiln furnitures for firing ferrites, high alumina ceramics, carbon black reactor, cement kiln, burner blocks.
Descriptions: High-alumina bricks are made from bauxite, a naturally occurring material containing aluminum hydroxide (al[oh]3) and kaolinitic clays. These raw materials are roasted to produce a mixture of synthetic alumina and mullite. By definition high-alumina bricks contain between 60 and 95 percent alumina and much more robust than fireclay refractories at high temperatures and in basic environments. In addition, these bricks exhibit better volume stability and abrasion resistance. Applications: High-alumina bricks are used in blast furnaces, blast-furnace stoves, liquid-steel ladles, steel refining furnaces, glass tanks, ceramic kilns, enamel kilns, rotary cement kilns and other vVarious kilns and furnaces.
Straight brick
Designed for 10-12mm tempered glass door High strength die-cast aluminium or zinc body Stainless steel material cover plate Compatible with interface of any floor hinge
2450x155mm Ornamental plaster moldings in glass fibre reinforced gypsum(grg) 5pcs per bundle
Ornamental plaster moldings in glass fibre reinforced gypsum(grg) 1pcs per bag
Item AL-1 AL-2 AL-3 AL-4 Al2O3(%min) 75 65 55 48 Fe2O3(%max) 0.7 1.0 1.0 1.8 R.U.L 0.2mpa 1520 1500 1470 1420 Refractoriness 1790 1790 1770 1750 A?P 22 22 21 21 C?C?S Mpa 53.9 49 44.1 39.2
Item LL-1 LL-2 LL-3 LL-4 Al2O3(%min) 70 75 77 80 Fe2O3(%max) - - - 1.5 ??(g/cm3) 2.68 2.7 2.75 2.85 Refractoriness 1765 1770 1770 1790 C.C.S mpa 58.5 60 80 70 R.U.L 1320 1350 1400 1470
Prefabricated modular building 1. Natural disaster proof such Typhoon-proof, earthquake-proof, termite-proof. It very durable! 2. Green house proof 3. Very transportation, accept worldwide. 4. Very cost effectiveness 5. Tailor made design. 6. Experience engineer consultant 7. and more effective support. Characterist prefab modular: 1. Construction made of metal H Beam. 2. Container size 20 Hq. About 6 units, and it was designed to be folded and be able to be packed in normal size container which can be delivery easily and save cost of shipping. 3. Exterior wall uses light -weight concrete Density 950 Kg/M3 finishing with ôTilesö Interior wall uses cement board 9t (Non asbestos) finishing with wall paper. 4. PC concrete 90t can support load 300 Kg/M2 finishing with ceramic ôTilesö. 5. Gypsum board 12t finishing with ôPlaswood 6tö 6. Asphalt single roof 7. Plumbing system,electrical system and Furniture complete set from factory(Piping pressure test=12 Bar)
BR Uniaxial Geogrids are meshes with elongated apertures made from high density polyethylene (HDPE) and generally used as reinforcement of walls and slopes. Their principle characteristic is good creep performance with low strain and high strength under constant load Properties Polymer: High Density Polyethlene: Polymers and master-batch for the production of Geogrids have been strictly tested and selected and performance confirmed in the company's Research and Development Laboratories. Production is tested and quality controlled in strict accordance with international standards and stable properties are guaranteed. Resistance to Ultra-violet light: A high level of resistance to U-V light is given to geogrid Products by the incorporation of not less than 2% of weathering-grade carbon black, well dispersed in the polymer matrix. These products may be used for many years in exposed conditions. Chemical and Biological Resistance: Uni-axial Geogrids are manufactured from High Density Polyethylene which is unaffected by all chemicals, including acids, alkalis and salts, normally found in soils. Also, it is not a nutrient, therefore these products are not affected by micro-organisms in soil. Creep Performance: A good creep performance under sustained loading is essential for the use of geogrids in critical structures such as walls, abutments and steep embankments. we maintains constant Creep testing programmes in its laboratories and works closely with National and International experts in the performance of geogrids to ensure that its products meet the strictest demands in all markets. bulk
Caso4 98% 40 kgs PP bags inside laminated
Building construction material
