Ornamental plaster moldings in glass fibre reinforced gypsum(grg)
1pcs per bag
Supplier: Gypsum Cornice, Center Flower, Corner, Wall Panel, Bleeding, Corbels, Pillar
Services: Manufacturers and Good Packing
Buyer:
Supplier: Terminal blocks, control & relay panels, power control centers, motor control centers, distribution boards, power connectors
Services: Designing, procurement, marketing
Polyester fiber sound-absorbing decorative panels with sound absorption, noise reduction, noise reduction, thermal insulation, thermal insulation, thermal insulation and other effects, the material is symmetrical and reliable, is a wide band of high-efficiency sound-absorbing materials. So how do you install a polyester sound-absorbing panel When installing the polyester fiber-absorbent panel wall with reserved back cavity, you can use straight clip type light steel keel to do the back attachment keel. In a good solid wall attached to the wall keel, the polyester fiber board with glue, or nail the method of connecting with the light steel keel. It has good flatness and stability. Directly affixed to the solid wall is as follows. 1. Pay attention to plate selection and plate-layout before construction. Pay attention to slight color difference, find out the center point of the paste surface, draw cross line, adopt the way of bricklaying, and start to line up the board from the center point (it is best to wear gloves to avoid pollution). 2.Cut the board surface Use steel ruler and sharp knife to cut or decorate accordingly, if you want to reduce the seam, you can tilt the blade inward by 0.5 1mm when cutting to facilitate the board edge butt, and reduce the gap. 3.Paste (1) Cement or wood base surface: can choose non-benzene universal glue or white latex made of neoprene rubber. (2) Base surface of paper gypsum board: under the premise that it is not easy to be damp, you can choose white emulsion glue or wallpaper glue made of cellulose as raw material (should be fixed with nails immediately after gluing to avoid the glue is not dry and the board surface moves). (3) Under the premise of easy or possible moisture, you can use universal glue. Polyester fiber sound-absorbing panels are porous sound-absorbing materials, it is easy to absorb glue, blocking holes, affecting the cavity after the sound-absorbing function. It is recommended that when constructing, you can brush glue on one side (only brush glue on the base plate or keel, the amount of brush glue is slightly heavier than normal). At the same time, you can also match the grain nail reinforcement. V-groove wall panels are CNC machine-cut to create 45 90 grooves in the surface of the PET acoustic panels. The paper size can be customized. It is widely used as a wall panel in wall spaces. Our Poly acoustic panels are made from recycled PET, which is also fully recyclable for complete acoustic panels, and we can cut CNC cut and UV printed panels on the surface that are lightweight, fire resistant, impact resistant, tacky, easy to install, and most importantly have high acoustic performance.
Supplier: Control panels, distribution boards, motor control center
Services: Consultancy
1) Dimensions: a) Max.: 3,050 x 1,450mm (thickness: 18, 20, 25, 30mm) b) Min.: 300 x 300mm (thickness: 18mm) 2) Standard dimensions: a) 1,200 x 2,400mm b) 1,200 x 1,800mm c) 1,000 x 2,000mm d) 1,000 x 1,800mm e) 900 x 1,800mm f) 900 x 900mm g) 800 x 800mm h) 600 x 600mm 3) Curve panel a) Diameter: 600-34,000mm b) Center angle: í_90 c) Panel thickness: 14, 20, 25, 30mm 4) Customized dimensions available upon request Wooden crate G.W.: 54kg (thickness: 20mm) G.W.: 50kg (thickness: 18mm)
1.capacitt:0.125m3-1000m3 2.FRP or stainless steel material 3.easy install,easy clean,long life. FRP GRP water tank. Panel sizes currently offered are: 1. 1meter square. 2. 1meter by 1/2 meter. 3.1/2 meter by 1/2meter. Standard Being the first recommended product by National Construction Material and Industry Bureau and Ministry of Construction, our SMC water tank lives up to the JC658 and 1-1997 technical request. The water quality complies with the Drinking Water Standard (GB5749-85) of our country. Application Industry, Mining, enterprises, public institution, residences, hotels, restaurants, reclainmed water disposal, fire controlling, other buildings to serve as the water storage facilities for drinking water, other water storage usage. The specification and performance of SMC mould pressing panel SMC water tank is made through high temperature, high pressure and mechanical suppressing. In the exterior design, the hollow radian at the center of panel helps to improve the tanks¡¡¥ pressure resistance ability. In the meantime, there are bulge rims of 45 or 60 degrees on the panels, which leaves out connection parts, making it more flexible and adaptable. The specifications of water tank panels are 1000mm¡¨¢1000mm, 1000mm¡¨¢500mm, 500mm¡¨¢500mm, the thickness include 5mm, 8mm, 10mm, 12mm, 14mm, 16mm. And 5mm panels specilized be used for covers. pallet or as per cutstomer required
Raised floor air flow Raised floor air flow panels Air flow under raised floor Data center - airflow panels | raised floor Perforated steel raised floor Raised floor air flow, raised floor air flow panels, air flow under raised floor, data center - airflow panels | raised floor, perforated steel raised floor General information The raised floor air flow /perforated steel panel is 600mm square. This surface covering on the panels can be high-pressure laminated (hpl) finish / vinyl (pvc) finish etc. The ventilation rate can be from 18%-60% It is often used with steel raised floor and mainly used for computer rooms, data center, command centers, communication center, laboratory, micro-electronics work shop, control room, clean room, call centre, etc. Why us Over 20 years experience in the manufacture of raised access flooring. Panel loading ability more than other floor 10~20% . Effectively solve the problems such as panel warping, plate deformation, surface degumming. High quality flooring, environment?friendly, long life and calcium sulfate core 100% recycled. Strong steel structure using high-end digital-controlled multipoint welding machine. Passed the certifications like iso9001, ce en12825, bs476, cisca, mob and so on. Other related products All steel raised floor, office building raised floor oa series, calcium sulphate raised floor panel, woodcore raised floor system, raised floor accessories, raised floor understructure system, magnetic carpet
- bearing bar: load carrying bars made from steel strip or slit sheet or from rolled extending in the direction of the grating span. - banding bar: a flat welded to a side or end of a grating panel, or along the line of a cutout, and extending neither above nor below the bearing bars. - - cross bars: the connecting bars, made from steel strip, slit sheet, or rolled bars, which extend across the bearing bars, usually perpendicular to them. They maybe into a corrugated or sinuous pattern and where they intersect the bearing bars, are welded forged or mechanically locked to them. - bearing bar centers: the distance center to center of bearing bars. - cross bar centers: the distance center to center of cross bars. Standard
Gamaflor pac system combines the quality and hardness of polygroup raised floor systems; it is made of a core of high density chipboard panels finished with different floor covering possible. It is perfect acoustic and waterproof flooring, comfortable to walk and innovation aesthetic. Gamaflor pac is ideal for different applications like offices, airports, data center, museums, casinos, libraries, military areas, … With this system you can obtain an easy access to facilities that they are under the flooring, all the panels are independent and easy to remove. Gamaflor pac system is possible to do in different heights between 90mm to 1 pallet contain 56 pcs of panels