Shield slurry pump refers to the slurry pump used at shield construction sites. It is named after the working conditions. Just like the slurry pump used at sewage treatment sites, we generally call it sludge return pump, and residual sewage pump. Mud pumps are the same. In fact, our slurry pump is used. So what is shield tunneling? Pansto Pump Industry will first take you to understand shield tunneling construction. The shield construction method refers to the full-section tunnel boring machine tunnel construction method. It is a tunnel construction method that relies on a rotating cutterhead to break the rock through a disc-shaped hob to form the entire tunnel section at one time. Generally, feed pumps and discharge pumps are used at such sites. Because the shield tunnel breaks rocks at the site, the particles are generally larger. In this case, it is generally recommended to use a gravel pump with good performance, or a slurry pump with an AH series open impeller. Because rocks are relatively abrasive, high-chromium alloys with good wear resistance are generally used as materials. The transmission mode is generally DC transmission. The sealing method is mostly sealed with packing. If you want to know more about the shield slurry pump, please contact us! Single-stage slurry pump, slurry pump diagram, slurry pump curve, slurry pump specifications Slurry pump brand Warman slurry pump ZJ slurry pump ZGB slurry pump AH slurry pump SP slurry pump vertical liquid slurry pump
Complete Automatic Aluminum Foil Container Making Machine Line Model: SEAC-63A-4 : Max. Mould Lenght 1150mm Units: Automatic Feeder+Automatic 63Ton Press+Cavities Mould+Auto Stacker+Scrap Sucker& Presser. It fit for all common size Aluminum Foil Container production requested. The Big capacity could to cover big range of size products. Lower power requested than other old model machines. Specification: 1. Raw material: Aluminum foil; Thickness: 0.030mm~0.250mm; Alloy: 8011, 8006, 3003, 3005 etc.; 2. Japan Inverter, PLC and 10inch touch screen control system; 3. Max. Width of Aluminum foil: 880mm; 4. Max. Diameter of Aluminum foil: 1000mm; 5. Core diameter of Aluminum foil: 76/152mm; 6. Working speed: 40-75 times/min; 7. Total Power: 11kw+2kw+2kw+1kw; 4Motor 8. Compressed air needed: 0.5- 0.8 Mpa, 0.2m3/min; 9. Install dimension: 7100*2600*3500mm; Technical Data: Max. Mould Size: 1100*900*450mm; Slide block stroke: 180-260mm; Slide block dimension: 380*145mm; Automatic mould height adjust unit: 0.5kw; Work plate dimension: 1100*200*300mm, separated two sets with Balls; Tension: complete automatic adjust; Feeding System: Servo Motor, higher precision and more power; Auto Stacker: SMC lift for stacking system, top quality; Power: 4P, 380V or 220V, 50Hz /60Hz; Net weight: 9,500kg.
Technical Parameters Travel of X and Y Axes: 800x1200 mm; Maximum cutting thickness/ Maximum height of the part: 700 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 985x1580 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 160 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150 �¼s; Approx. Machine size (LxWxH): 2600x2400x1800 mm; Approx. Machine weight: 4500 kg; Approx. Machine control cabinet size: 670x630x1800 mm; Approx. Machine control cabinet weight: 200 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 â??. ;
Technical Parameters : Travel of X and Y Axes: 500x630 mm; Maximum cutting thickness/ Maximum height of the part: 600 mm; Maximum Work piece weight: 700 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 600x860x600 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 150 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150; Approx. Machine size (LxWxH): 2000x1950x1750 mm; Approx. Machine weight: 2540 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 ;
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 2980 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters: Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2180 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1790 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1480 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 3000 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2200 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1800 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1500 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Model features: This series of models is an open aluminum alloy profile structure heat shrink baking machine, suitable for electronic wire harness and new energy wire harness heat shrink tubes, circuit boards, inductor wire diagrams, copper bars, hardware accessories and other products (heat shrink baking size range small, but the product size is relatively long), or products that can only be heat-shrunk and baked at one end. 1. The machine uses far-infrared heating tubes for heating (the new energy wiring harness uses thermal radiation heat shrinkable tubes). There are heating tubes installed on the top, bottom, left and right, which can be heated at the same time. It is also equipped with a high-speed centrifugal fan, which can Stir the heat evenly to keep the entire box at a constant temperature; the products that need to be heat-shrunk and baked can be heated at the same time, maintaining the original characteristics of the product, so that the product does not deform or discolor after heat-shrinking or baking, and the quality Stablize: 2. Use high-temperature resistant Teflon mesh belt (temperature resistant 0-350), feeding in assembly line mode, fast baking speed and high efficiency: 3. Aluminum alloy profile structure mode, the mechanical size and structure can be customized and modified at will, and the machine model has a compact structure and exquisite design, and can also be moved and connected to the production line and controlled synchronously; 4. Intelligent control system, the heating temperature and speed can be adjusted at will, which can adapt to the temperature and heat shrinking time needs of different products; 5. Independent control electric box, away from high temperatures; the double-layer design of the heating box is sandwiched with high-temperature insulation cotton (temperature resistance 1200�°C), so that the surface temperature of the box will not be overheated, which not only makes the working environment comfortable, but also reduces Energy waste.
Bucket Elevator Product Introduction: A bucket elevator is a fixed mechanical conveying equipment mainly suitable for continuous vertical lifting of powdered, granular, and small materials. It can be widely used for lifting loose materials in various scale feed factories, flour mills, rice mills, oil mills, starch factories, grain depots, port terminals, etc. The bucket elevator is used to vertically lift block and granular materials such as limestone, coal, gypsum, clinker, dry clay, as well as powdered materials such as raw materials, cement, and coal powder that pass through the crusher. According to the different operating speeds of the hopper, bucket elevators can be divided into three forms: centrifugal discharge, gravity discharge, and mixed discharge. The centrifugal unloading hopper has a fast speed and is suitable for conveying materials with small grinding properties such as powder, granular, and small pieces; Gravity discharge has a slower bucket speed and is suitable for conveying bulk, high density, and high grindability materials, such as limestone and clinker. The traction components of a bucket elevator include ring chains, plate chains, and tape. The structure and manufacturing of the ring chain are relatively simple, and the connection with the hopper is also very strong. When conveying materials with high grinding properties, the wear of the chain is relatively small, but its own weight is relatively large. The plate chain structure is relatively sturdy and lightweight, suitable for elevators with large lifting capacity. However, the hinge joint is prone to wear and tear, and the structure of the tape is relatively simple, but it is not suitable for conveying materials with high grinding properties. The temperature of ordinary tape materials does not exceed 60 , steel rope tape allows material temperature to reach 80 and the temperature of materials transported by ring chain and plate chain can reach 250 â??. Application: This series of bucket elevators is suitable for conveying powdery, granular, and small pieces of non abrasive and low abrasive materials, such as coal, cement, stones, sand, clay, ore, etc. Due to the traction mechanism of the elevator being a circular chain, it allows for the transportation of materials with higher temperatures (material temperature not exceeding 250 ). The general conveying height can reach up to 40 meters.
It is an intermittent full automatic capsule filling machine with multiple tamping stations, precise design and stable performance. Following processes are completed: capsule feeding, capsule separating, powderfilling, defective capsule rejecting, capsule closing, finished capsule discharging automatically. It adopts closed rotary table with ten stations. There are 21 holes in1 row crossing on the module. Function of machine reaches international advanced standard, which also meets the requirement of GMP, CEand FDA standard. Itâ??s absolutely the most ideal machine for producing capsule products. Product INTRODUCTION Performance (1) Output: 3200pcs/min (2) Change speed by transducer, PLC control(C type) (3) Easy to operate and install (4) Function for filling powder, pellet, granule, pellet and pill into capsule. (5) Automatic detection and diagnosis of lack of material, capsule and mechanical trouble, make alarm and stop automatically. (6) Displaying in-time speed and accumulative output. (7) Available for electronic signature and recording, and Industrial Ethernet. Machine Advantage 1. Closed turret and dosing station,preventing powder come into the turret. Easy to operate, clean and change over the mould. 2. New turret design, adopt 90 linear bearings from Japan, to guarantee machine precision and use life 3. Adopt bigger cam&dosing disk design, enhance the stability of the machine and extend the use life of the machine 4. Equippedwith oil pump forsupply lubricate oil to the cam channel, reduce abrasion and extend use life of the parts 5. Automatic capsule switch, controlled by touch screen via PLC 6. Touch screenwith used-friendly graphic operator panel.
Strawberry agricultural production project with hydroponic system Cayman Island George Town Project for fish purchase and Cayman collection center Bolivia Tarija Blueberry agricultural production project with Hydroponic system Colombia Bogota Production and marketing of roasted coffee with hemp infusion in the USA Colombia Cohello Planting raw materials to contribute to food sovereignty El Salvador San Miguel Acquisition and reactivation of the Mill containing a Coffee Processing Plant El Salvador San Miguel Construction and start-up of a dehydrated instant food production plant Guatemala Guatemala Acquisition and reactivation of the Mill containing a Coffee Processing Plant Guatemala San Marcos Banana cultivation in Guatemala Guatemala Guatemala Projects for the development of legumes and vegetables Honduras Cortes Fish Concentrates or Feed Plant (PAP) Honduras Cortes Tilapia Processing Plant for industrialization Mexico Manzanillo Coconut cultivation Mexico Manzanillo Cultivation of Petac�³n Mango and its varieties Mexico Manzanillo Persian Lemon Processing Plant Panama Panama Hydroponics in the valleys of Anton 5 ha (Guandu, Peas, Chard) Peru Amazonia Construction of a collection center for the development of local production Surinam Paramaribo Coconut cultivation and purchase Surinam Paramaribo Waterlogged Rice Cultivation Surinam Paramaribo Cultivation of Adjuma Chili Pepper Venezuela Lara Production of eggs for consumption with chickens Venezuela Lara Diesel Engine Assembly Plant Venezuela Lara Enabling a new line of dehydrated instant foods in a processing plant Venezuela Falcon Melon planting in Falcon Paraguana Venezuela Tachira Diversification and improvements of agricultural production in the Seboruco Venezuela Tachira Tomato and Paprika agricultural production project with hydroponic system Venezuela Tachira Diversification and improvements of coffee production in the C�³rdoba
TECHNICAL DETAILS 1. The software system and the enclosed whole structure are developed by us, the internal main accessories are imported, our machine can adapt to the hash working environment of heavy dust, high pollution and corrosion, the application scope is widely and the service life is longer 2. In order to get better sorting result and improve the flexibility and sorting capability, we adopt the 32 bit color image processing method and apply the mathematical morphology based upon HIS color space 3. The subtle color difference of 0.02mm2 can be detected with the high precision full-color plane array CCD sensor technology; the suitable processing method is applied according to the special characteristics of the ore, so as to ensure the accuracy in sorting the material 4. Our color sorter fully satisfy the requirement of high output capacity and accuracy raised from the large and medium-sized mining enterprises, some types of our color sorter even have the output capacity 40 tons / hour, which is 4-5 times as high as the similar domestic factories 5. In order to avoid repeated breaking of the ore, reduce damage and waste, the size scope of the ore material for our color sorter is designed as wider as possible, which is within 40 mesh size to 10cm 6. The crawler-type double-layer flexible conveyor ensures the higher sorting accuracy and the lower carryover ratio 7. Our color sorter can select and process the ore with big and small grain simultaneously, i.e . it satisfies the requirement of selecting the ore with big difference in size 8. The split-type structure design of vibration feeding part and the main equipment body eliminate the influence of vibration to the main equipment body, which ensure the stability 9. The unique modular design and self maintenance function (automatic dust removal and spray) ensure the long working time 10. The protective layer is adopted on the surface of the equipment that contacting with ore material, such layer is characterized with wear-resistance, corrosion-resistance, easy-changing, etc . , which ensure the long service life.
Features for the DR Power WM13026DEN Wide Area Mower FLEX-SPEED Drive System Match your mowing pace to your walking pace by squeezing a pressure-sensitive, ergonomically designed hand lever. Simply pull the lever toward you to increase speed or relax your grip to slow down. Dual Blade Design Twin blades allow for greater blade tip speed than one longer blade and that produces a clean, high-quality cut. The leading blade (on operator's left side) feeds its clippings into the trailing blade, so they get recut resulting in more finely chopped clippings and small windrows when using side discharge. 3-in-1 Mower Bag, mulch, or side discharge. Bagger and mulching plug included with your mower. Bagger holds up to 2 bushels, so you spend more time mowing and less time emptying. Powerful OHV Engine DR OHV engine has 8.8 ft.-lbs. gross torque (@2500rpm as per SAE J1940). Plenty of power to handle the extra mowing width. One-Touch Height Adjustment Choose from 8 different cutting height settings, from 1" to 4". Never Flat Tires Roll along easily with no-maintenance, never flat wheels â?? 8" high in the front, 10" in the rear. Specifications General CARB Certified: Yes Cutting Blade Tip Speed: 19,000 FPM Cutting Height: Adjustable, 1" to 4" Cutting Width: 26" Grass Bagger Capacity: 2.5 bushels Number of Blades: 2 Engine Air Filter: Paper Cooling Methods: Air cooled Displacement: 200 cc Engine Type: OHV Ft Lbs. Torque: 8.8 Lubrication: Splash Make: DR Number Of Cylinders: 1 Oil Capacity: 17oz Oil Type: SAE 30W HD Pre-Cleaner: Foam
Pipe Fencing For Cattle Farm and Ranch Metal Pipe Fences can be used for a variety of purposes and are available in a variety of styles. Zishen helps you determine the best solution for your property. From cattle fencing, horse fencing to field fencing or just decorative, we build pipe fencing for cattle from the highest quality steel for a long life. Pipe fencing for cattle can be placed separately with uprights and horizontal rails, or pipe fencing can contain paneling or mesh. A paneled or fenced monorail can keep predators or pets out while keeping livestock inside. Need a heavy-duty tall fence? Pipe fencing for cattle can be used to reinforce a deer fence or a premium hunting fence. Zishen can install any number of rails depending on your purposes. A single horizontal rail is often used to "top" farm or ranch fencing, with mesh or wire fencing as the panel. We can incorporate "no climbing" wire, chicken wire, barbed wire, pig boards, etc. Pipe fencing for cattle with multiple rails (two, three or four layers) stand alone without mesh or wiring and can be used as a large horse or corral fence. Pipe fencing on farms is particularly suitable for feed plots or cattle gates and can withstand the weight of crowded fields. Add a section of barbed wire to prevent tipping, and your pipe fence will do the job.
The Trimble S6 DR is a 100% cable-free robotic total station. Numerous new features and the latest technologies will catapult your productivity and profitability forward. Available with either the TSC2 or TCU controllers. Trimble S6 total station offers field-proven optical and GPS integration in a field to office. The controller of your choice connects without wires to the GPS system. It can be changed between detectors, collecting all information into a single job file for data transfer. Trimble S6 Total Station supplies the ability and flexibility required by todayâ??s surveying professionals. Using Trimble VISION technologies, the Trimble S6 Total Station enables surveyors to remotely see and measure through a live video feed from the tool on their data control. The Trimble S6 Robotic redefines surveying tool performance with an unsurpassed integration of servos, angle sensors, and measurement technology. The Trimble S6 Robotic Complete Station offers innovative MagDrive technologies for stunning speed. It takes the work from servo or surveying. Numerous features and the latest technologies will catapult your productivity and profitability. And as an upgradable studying solution, the Trimble S6 Robotic Total Station will grow with your business. The advanced error compensation of the instrument provides precise measurements every time. Together with MagDrive servo technologyâ??s smooth servo motors, the Trimble S6 offers exceptional speed and accuracy. Come With: 1 x 2.4Ghz Radio Module Replacement for Trimble S6 1 x Trimble S6 Power and Charging Kit 1 x Battery Connector Board Replacement for Trimble S6 1x Tribrach 1 x 360 prism AC adaptor TSC2 with Access TSC2 charger 2 x Hard carry cases TRIPOD, PRISMS OR PRISM POLE 3 Battery Packs User Manual
