Specifications:- 1)Origin:Russia 2)Ash Content,not more %: 0.1 3)Mass fraction of sulphur,not more % -low-sulphur-residual-oil :0.5 4)Temperature of the flash,not less °C in the closed crucible in the open crucible °C :110 min 5)The temperature of solidification,not higher °C :25 6)Kinematics viscosity at 50°C: 118 max 7)Water Content: 0.5% 8)Mechanical Impurities:Lower than 0.1% 9)Acidity:Lower than 5mg KOH/100 ml 10)Gross Calorific value Kcal/kg/KJ/kg: Min 9200/41300 11)Density at 15.0 deg. C kg/l: 0.880-0.9200 12)Hydrogen sulfide content (H2S)pom:0.5 max 13)Carbon Residua:Lower than 7% 14)Vanadium (V) ppm : 30% MAX 15)Aluminium (Al) ppm : 5 16)Silikon (Si) ppm :12 17)Nickel ((NI) ppm :49 18)Asphaltenes :/ :3.6% 50,000-250,000 MT/month with roll for extension 100-75x50mmx75cm Tanks
This series of products is made of wood chips and produced� by a unique phosphoric acid production process. It has a large specific surface area, a developed mesoporous structure, large adsorption capacity, good decolorization effect, fast adsorption speed, stable performance of various indexes, etc. Features. It is mainly used in sugars(such as fermentation sugar, extraction of sugar, etc.), and decolorization, extraction, deodorization, deodorization and impurity removal of high pigments of food additives, chemical additives, dye intermediates, and pharmaceutical preparations. Specifications: MB Value mL/0.1g 20 18 17 16 15 14 13 Caramel� Decolorization % 130 120 120 110 110 110 110 Moisture Content % 10 10 10-60 10-60 10-60 10-60 10-60 Ash Content % 5 6 5 6 6 6 7 PH Value 3.5 3-5 2-5 3-5 3-5 3-5 3-5 Fe Content % 0.05 0.05 0.05 0.05 0.05 0.05 0.10 Particle Size 200 Mesh % 95 95 95 90 90 90 90 Water Soluble Content % 4.0 4.0 4.0 4.0 4.0 4.0 4.0 Lead Content mg/kg % 5 5 5 5 5 5 5 Arsenic Content mg/kg 3 3 3 3 3 3 3 High aromatic hydrocarbon and cyanide are tested
Scope Automatic high-temperature high-shear viscosity meter were measured and the apparent viscosity of the lubricant at high temperature and high shear rates, the test principle is at 150 ? test conditions, under nitrogen (carbon dioxide) pressure, the sample from the capillary viscosity meter flow, and pressure from the flow time of the sample, obtained apparent shear rate capillary viscometer reaches a certain apparent viscosity, with each pool viscometer calibration curve corresponding to the measured pressure of the oil viscosity. Features 1, high-temperature high-shear viscosity automatic analyzer for domestic initiative, the key components used by the us cn accessories to ensure product quality; 2, automatic high-temperature high-shear viscosity meter with digital display of pressure and time, more intuitive controllable; 3, high-temperature high-shear viscosity automatic analyzer using flanders dedicated high shear viscosity calculation software prompts, easy to learn; 4, there is a stopcock automatic high temperature and high shear viscosity of each sample tube detector, in line with the standard requirements; 5, automatic high-temperature high-shear viscosity analyzer configured with ftc circuit protection devices, over-temperature automatically cut off power; Technical parameters 1. Applicable standards: astm d5481 sh / t0703 2, heating: electric heating rods 3, temperature range: room temperature ~ 150 ? 4. Determination of the viscosity range: 0.5-8mpa.S@150c 5, the control pressure range: 3.5kgf / cm2 ~ 35kgf / cm2 6, sample capacity: 10 ml 7, pressure display: digital pressure gauge 8, the time display: digital schedule 9, the result of the calculation: friend’s dedicated calculation software 10, power supply: ac220v 50hz
Scope Automatic high-temperature high-shear viscosity meter were measured and the apparent viscosity of the lubricant at high temperature and high shear rates, the test principle is at 150 ? test conditions, under nitrogen (carbon dioxide) pressure, the sample from the capillary viscosity meter flow, and pressure from the flow time of the sample, obtained apparent shear rate capillary viscometer reaches a certain apparent viscosity, with each pool viscometer calibration curve corresponding to the measured pressure of the oil viscosity. Features 1, high-temperature high-shear viscosity automatic analyzer for domestic initiative, the key components used by the us cn accessories to ensure product quality; 2, automatic high-temperature high-shear viscosity meter with digital display of pressure and time, more intuitive controllable; 3, high-temperature high-shear viscosity automatic analyzer using flanders dedicated high shear viscosity calculation software prompts, easy to learn; 4, there is a stopcock automatic high temperature and high shear viscosity of each sample tube detector, in line with the standard requirements; 5, automatic high-temperature high-shear viscosity analyzer configured with ftc circuit protection devices, over-temperature automatically cut off power; Technical parameters 1. Applicable standards: astm d5481 sh / t0703 2, heating: electric heating rods 3, temperature range: room temperature ~ 150 ? 4. Determination of the viscosity range: 0.5-8mpa.S@150c 5, the control pressure range: 3.5kgf / cm2 ~ 35kgf / cm2 6, sample capacity: 10 ml 7, pressure display: digital pressure gauge 8, the time display: digital schedule 9, the result of the calculation: friend’s dedicated calculation software 10, power supply: ac220v 50hz
TECHNICAL FEATURES 1,Type, CNC Hydraulic Guillotine Type 2,Cutting length, 3200mm 3,Cutting thickness, 8mm(mild steel at 450MPa) 4,Shear angle, 0.5ï½?2 degree adjustable 5,Throat depth, 80mm 6,Stroke back gauge,750mm 7,Main motor, 7.5kw 8,Stroke per Minute,10 times CONFIGURATIONS 9,CNC control system,Delem DAC360, made in Holland 10,CNC control axis,X axis control backgauge Other 3 axis control cutting angle, baldes clearance and cutting stroke 11,Backgauge equipped with ball screw and servo motor, 12,Servo motor of backgauge,Japan Yaskawa 13,Main Electric elements in Cabinet,Schneider 14,Seal in the cylinders,NOK 15,Pump,Made in China 16,Electrical box Power off when open the door,ABB 17,Photoelectric sensor on back safety,Korea Autonics 18,Electromagnetic ball valves,European brand 19,Electromagnetic valve,Taiwan HP 20,Blades material,6CrW2Si 21,Ferrule connecting, 22,Holistic welding structure treated by annealing, 23,The power storage device returns steadily and quickly, 24,Hydraulic-driven upper blade carrier moving downward and linearly., 25,Automical adjust the clearance between upper and lower 4-edge blades., 26,DAC360 system controls shearing stroke, shearing angle adjusted., 27,The forward-backward moving of backgauge is controlled by DAC360 with high precision., 28,Light alignment device makes shearing easily and high-efficiently., 29,Gross weight,7400kgs 30,Before packing size(mm),3950x1850x2010 31,Packing,Transportation:40'HC container together 32,Delivery time: 50 days
Material: The hexagonal wire mesh has hexagonal holes of the same size. The material is mainly low carbon steel. According to different surface treatments, hexagonal wire mesh can be divided into two types: galvanized metal wire and PVC coated metal wire. PRODUCTS DESCRIPTION About hexagonal wire mesh The hexagonal wire mesh has hexagonal holes of the same size. The material is mainly low carbon steel. According to different surface treatments, hexagonal wire mesh can be divided into two types: galvanized metal wire and PVC coated metal wire. The wire diameter of the galvanized hexagonal wire mesh is 0.3 mm to 2.0 mm, and the wire diameter of the PVC-coated hexagonal wire mesh is 0.8 mm to 2.6 mm. Hexagonal net has good flexibility and corrosion resistance, and is widely used as a gabion net to protect slopes. According to different applications, hexagonal wire mesh can be divided into chicken wire and slope protection wire (or gabion net), the former has a smaller mesh. Feature: Easy construction, no special techniques Strong corrosion resistance and weather resistance Good stability and not easy collapse Good flexibility to increase the buffer force of objects Easy installation and saving transportation costs A long service life Application: Slope protection Bank protection Stair protection Mountain protection Chicken wire Gabion Package: Chicken wire: in rolls and plastic films. Gabion: in bundles and pallets Varieties of hexagonal wire mesh: Hexagonal wire mesh: hot dipped galvanized after weaving. Hexagonal wire mesh: hot dipped galvanized before weaving Hexagonal wire mesh: electro galvanized after weaving. Hexagonal wire mesh: electro galvanized before weaving. Hexagonal wire mesh: PVC coated. Hexagonal wire mesh: in stainless steel As a professional manufacturer of hexagonal wire mesh,� ANPING Xinghong� has been developing in improving products quality to satisfy customers' needs. Now, our hexagonal wire meshes are exported to more than 20 countries for chicken wire, rabbit netting, rockfall netting, stucco netting, gabion basket and gabion sack. With best quality and reasonable price, our hexagonal wire mesh products gain the trust of customers and are widely recognized by customers. Welcome to contact us! Twist style: Normal twist, Reverse twist Galvanized hexagonal wire mesh in normal twist Mesh size Wire gauge (BWG) inch mm 3/8" 10 32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21 1/2" 13 27, 26, 25, 24, 23, 22, 21, 20 5/8" 16 32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21 3/4" 20 25, 24, 23, 22, 21, 20, 19 1" 25 27, 26, 25, 24, 23, 22, 21, 20, 19, 18 1-1/4" 32 23, 22, 21, 20, 19, 18 1-1/2" 40 23, 22, 21, 20, 19, 18, 17 2" 50 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 2-1/2" 65 21, 20, 19, 18 3" 75 21, 20, 19, 18, 17, 16, 15, 14 4" 100 19, 18, 17, 16, 15, 14
10L Rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries. Main Features of the10L Automatic Lifting Rotary Evaporator: 1, The main body of the use of stainless steel + aluminum alloy, reasonable structure, materials stress. 2, Sealing system using PTFE and imported fluorine rubber combination seal, to maintain high vacuum. 3, Vacuum pressure gauge shows real-time vacuum, vacuum up to 0.098Mpa. 4, Glass parts are all high borosilicate glass (GG-17), high temperature, anti-corrosion. 5, Can be continuously fed to facilitate the use of customers, valve-type feeding tube sets of tetrafluoroethylene tube. 6, Vertical three-tier serpentine coil condenser, the main cold + pay cold double condenser, to ensure high recovery rate, additional tube. 7, Microcomputer ON-OFF power switch control. 8, Bath digital display, intelligent thermostat control, K-type sensor fast and accurate delivery temperature. 9, Frequency control (0-120rpm), speed digital display, knob set, easy to operate. 10, Fuse safety protection. 11, The pot is made of high quality stainless steel, durable and durable. 12, Bath handwheel lift. 13, Collection of bottles with a discharge material, easy to evaporate the collection of extracts, discharge. 14, Check valve control, continuous discharge.
Brief Introduction of the 10L Rotary evaporator: 10L Rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries. Its principle is: under vacuum condition, constant temperature heating makes the rotary bottle rotate at constant speed, and the material forms large area film on the bottle wall, so it can be evaporated efficiently. The solvent evaporation is cooled by the high-efficiency glass condenser and recovered in the collecting bottle, so as to greatly improve the evaporation efficiency. The utility model is especially suitable for concentrating and purifying biological articles with high temperature and easy decomposition and degeneration. Main Features of the 10L Rotary evaporator 1, The main body of the use of stainless steel + aluminum alloy, reasonable structure, materials stress. 2, Sealing system using PTFE and imported fluorine rubber combination seal, to maintain high vacuum. 3, Vacuum pressure gauge shows real-time vacuum, vacuum up to 0.098Mpa. 4, Glass parts are all high borosilicate glass (GG-17), high temperature, anti-corrosion. 5, Can be continuously fed to facilitate the use of customers, valve-type feeding tube sets of tetrafluoroethylene tube. 6, Vertical three-tier serpentine coil condenser, the main cold + pay cold double condenser, to ensure high recovery rate, additional tube. 7, Microcomputer ON-OFF power switch control. 8, Bath digital display, intelligent thermostat control, K-type sensor fast and accurate delivery temperature. 9, Frequency control (0-120rpm), speed digital display, knob set, easy to operate. 10, Fuse safety protection. 11, The pot is made of high quality stainless steel, durable and durable. 12, Bath handwheel lift. 13, Collection of bottles with a discharge material, easy to evaporate the collection of extracts, discharge. 14, Check valve control, continuous discharge.
Our Drill bits are come from CS brand and Kingdream Brand, which are the best famous brand in China and top 5 in the word, our drill bits has solded to more than 30 countries including USA and Russia with superior quality. - Product Specifications 1) Condition: 100% new 2) Manufacturer brand name: CS or Kingdream brand 3) The exact bit size: 8 1/2" = 215.9mm 4) IADC code: 127 Steel tooth Tricone Bit 5) Seal type: Elastomer Sealed Bearing 6) Bearing type: Journal Sealed bearing bit with gauge protection 7) Nozzle quantity and nozzle size:3 pcs 8) Connection joint Pin size: 4 1/2 API Reg pin 3-Available sizes: 60mm,65mm,76mm,93mm,95mm,98mm(3 7/8),101.6mm,114mm,118mm,120mm,127mm(5) 130.1mm(5 1/8),133.3mm(5 1/4),139.7mm(5 1/2),142.8mm(5 5/8),149.2mm(5 7/8) 152.4mm(6),155.5mm(6 1/8),158.7mm(6 1/4),161.9mm(6 3/8),165.1mm(6 1/2) 190.5mm(7 1/2),193.6mm(7 5/8),200.0mm(7 7/8) 212.7mm(8 3/8),215.9mm(8 1/2),222.2mm8 3/4) 241.3(9 1/2),244.4(9 5/8),250.8(9 7/8) 269.8(10 5/8),295.3(11 5/8) 311.1(12 1/4),346.0 (13 5/8),349.2(13 3/4) 374.6(14 3/4) 381(15),393.7(15 1/2),406.4(16) 444.5(17 1/2),508(20),558(22),609.6(24) 660.4(26) 4-Available models: Steel tooth (IADC) : 111, 121,131 117,124,126,127,136,137 211,311 216,217, 227 TCI (IADC): 415,435, 417,437 515,525,535,545, 517,527,537,547 615,625,635,,617,627,637,737 512,522,532,612,622,632,732
(TL-101) Digital manometer measures gauge/differential pressure from -55H2O to +55H2O(2 psi) It features 11 selectable units of measure: in H2O, pis, bar,mbar,Kpa,inHg,mmHg,ozin2,ftH2O,kgcm, additional features include data hold and auto power off disabled,careful use of this meter will provide years of reliable service. Features: 1.Max / minimum / average, and with a relative time 2.Large LCD backlit dual display 3.Zeroing, offset, and data compensation 4.Low battery display and automatic shutdown 5.Data Hold and Error code 6.9Vbattery 7.Client can calibrate the meter by oneself Specifications: 1.Pressure Range:+/-5psi(TL-101) 2.Accuracy:+0.3% FSO (at 25oC) 3.Repeatability: +0.2% (Max+0.5%FSO) 4.Linearity/Hysteresis:+0.29% FSO 5.Response Time:0.5Seconds Typical 6.Over Range Indicator:Hi 7.Under Range Indicator:Lo 8.Operating Conditions:0 to 50oC(32 to 122oF) 9.Storage Conditions:-10 to 60oC (14 to 140oF) 10.11 Selectable units of Measure 11.Max / minimum / average, and with a relative time 12.Large LCD backlit dual display 13.Zeroing, offset, and data compensation 14.Low battery display and automatic shutdown 15.Data Hold and Error code 16.9Vbattery 17.Client can calibrate the meter by oneself OEM is acceptable CE and ROHS are approved Lowest shipping cost could be provided 53X31X36CM/carton 37pcs/carton 10KGS/carton
Model No. Height Stitch Dtex Gauge Density GateBall 10 16 5000 3/16 10500 Golf 30 16 5000 3/16 63000 JW-DoubleS-25 25 20 8500 3/8 21000 JW-DoubleS-50 50 16 14000 5/8 10500 JW-2520M 25 20 10000 3/8 21000 JW-2520C 25 20 10000 3/8 21000 JW-3016M 30 16 7000 3/8 16800 JW-Rainbow 25 16 9000 3/8 16800 JW-Covering 10 50 2000 3/8 52500 JW-001 25 16 8000 3/8 16800 JW-002 50 16 10000 5/8 10500 JW-003 25 16 7000 3/8 16800 JW-004 25 16 9200 3/8 16800 JW-005 25 16 9200 3/8 16800 JW-007 25 16 9500 3/8 16800 JW-011S 50 16 10000 5/8 10500 JW-011 50 16 6000 5/8 10500 JW-011 50 16 8000 5/8 10500 JW-011 50 16 10000 5/8 10500 JW-012M 30 20 14000 3/8 21000 JW-013 12 30 2000 1/5 58800 JW-014 25 16 8000 3/8 16800 JW-015 25 16 8000 3/8 16800 JW-016 25 16 8800 3/8 16800 JW-017 25 16 7200 3/8 16800 JW-030-2 30 16 7000 3/8 16800 JW-030-2 40 18 7000 3/8 18900 JW-030-2 50 18 8000 3/8 18900 Nonfilling 30 20 12000 3/8 21000 Nonfilling 30 20 14000 3/8 21000 Y-1 30 16 11000 3/8 16800 Y-2 35 15 12000 3/8 15750 Y-3 30 18 7000 3/8 18900 Y-4 45 13 16500 3/8 13650 Y-5 40 18 12000 3/8 18900 Y-6 45 16 9000 3/8 16800 Y-9 50 11 16500 3/8 11550 Y-10 30 16 11500 3/8 16800 Y-11 30 16 10500 3/8 16800 Y-12 40 18 7800 3/8 18900 Y-13 30 18 8500 3/8 18900 Y-14 30 14 9500 3/8 14700 Y-15 45 14 12000 3/8 14700 Y-16 45 14 11500 3/8 14700 Y-17 45 14 12000 3/8 14700 Y-18 45 14 16000 3/8 14700 Y-19 30 20 8500 3/8 21000 Y-20 20 20 9400 3/8 21000 Y-20-1 30 20 9400 3/8 21000 Y-21 35 17 12500 3/8 17850 Y-22 35 18 11500 3/8 18900 Y-S 40 16 12000 3/8 16800 Y-M 45 16 11000 3/8 16800 A-2 25 16 8000 3/8 16800
3 ProductService Description Introducing the INFINITY F1 a cuttingedge 2D fiber laser cutting system meticulously crafted by SLTL Group Indias pioneering fiber laser cutting machine inventor and manufacturer Designed for optimal safety the INFINITY F1 boasts a hermetically sealed cabinet providing a secure environment for seamless operation Its rapid booting time sets a new standard for efficiency and the highend 64bit CNC controller with a userfriendly interface responds within an impressive 20 nanoseconds making the Infinity super responsive Key Features of Infinity F1 AntiCollision Mechanism The Infinity F1 features an advanced anticollision mechanism comprising snip sew and parabolic leaps This minimizes nonproductive times caused by parts tipping over during the cutting of thin sheet metal ensuring continuous productivity without collisions between the laser head and cutout pieces Auto Sheet Orientation Revolutionize your cutting process with the autosheet orientation feature Say goodbye to manual sheet alignment for each cutting operation as this innovative feature automatically orients the program to match the angle of the sheet Eliminate nonproductive time spent on rearranging sheets accelerating your workflow Smart Automation The Infinity F1 incorporates smart nesting software with exceptional intuitiveness This software not only reduces processing time for smaller designs but also enhances efficiency for larger parts Users can effortlessly add change or delete programs on the go achieving maximum precision and highspeed laser outputs of up to 10 kW Effective Work with Leading Software The integration of superior laser machines with smart nesting software ensures effective work processes This highly intuitive software minimizes processing time for various design sizes providing flexibility to users for realtime program adjustments Experience maximum precision and highspeed laser outputs at peak power with the Infinity F1 Unleash the power of precision and efficiency with the Infinity F1 where cuttingedge technology meets the demands of the future in metal cutting SpecificationAdditional Details a Model Infinity F1 b Laser Source Fiber c Laser Power 1 15 2 3 4 6 kW d Power Consumption 10 12 17 20 24 32 kW e Working Area X Y Z 1550 x 1550 x 150mm 61 x 61 x 59 f Maximum Speed X Y Z 170mmin g Position Accuracy 005 mmm h Repeatability 002 mmm i Work Piece Weight 220 kg j Country of origin Made in India
NO. OE # MAKE MODEL Porsche Cayenne 7L0698007 1 VW Touareg 95535890105 3.6 4.8 4E0616007D AUDI A8 2 4L0698007A 3 4L0698007B AUDI 4L0698007C Q7 3.0 4.2 6.0 A6 4 4F0616005F AUDI C6 4F0616005E 2004-2011 4F0616006A Without a distributing valve LR045251 Land Rover Lr3 5 RYG500160 LR044016 Lr4 LR045444 Range Rover Sport LR061888 15228009 Seville 22189726 6 22175873 Cadillac 12494811 DeVille 12494809 949-010 7 LR041777 Land Rover Range Rover 949-000 Cadillac Escalade 8 15254590 Chevrolet Suburban 1500 19299545 Avalanche 1500 20930288 GMC Yukon 22941806 1643201204 9 164320120405 Mercedes-Benz ML GL 10 2213201704 Mercedes-Benz S级 11 4F0616013 AUDI A6 A8 Compresor de aire Unidad válvula 25806015 949-009 "BUICK LUCERNE 2006-2011 " 12 15811960 CADILLAC DTS 2006-2011 15147082 BUICK TERRAZA 2005-2007 22137534 CHEVROLET UPLANDER 2005-2008 13 949-008 CHEVROLET VENTURE 1997-2005 OLDSMOBILE SILHOUETTE 1997-2004 PONTIAC MONTANA 1999-2006 PONTIAC TRANS SPORT 1997-1998 SATURN RELAY 2005-2007 Lr3 14 LR023964 "Land Rover  Land Rover " Lr4 15 "97035815110 " 97035815111 PORSCHE Panamera 37206859714 X5 16 37206799419 X6 37206789938 BMW 37226775479 E70 NEW 37226785506 LR047172 LAND ROVER RANGE ROVER 17 LR069691 2012-2016 LR056304 37226787616 750Li 18 37226778773 BMW X5 37221092349 E53 X6 760Li 2000-2005 LeSabre BUICK 1997-2005 Park Avenue 19 88957250 1997-1999 Riviera 2003-2007 Rendezvous
3 ProductService Description Introducing PRIME a cuttingedge laser cutting machine born from SLTL Groups renowned Brahmastra series Engineered to empower modern manufacturers PRIME ensures precise and efficient production control This system featuring SLTLs proprietary software stands out as the markets most robust solution combining intelligent hardware with userfriendly design Highly Intelligent Nesting Smart nesting software reduces processing time for both small and large designs Users enjoy flexibility to add change or delete programs on the fly Achieve maximum precision and speed with laser outputs at peak power UserFriendly Software PRIME integrates futuristic laser technology with smart software capable of drawing and editing basic shapes within the system The userfriendly interface makes machine operation seamless offering essential functionalities on the dashboard AntiCollision Mechanism The anticollision mechanism including snip sew and parabolic leaps minimizes nonproductive times caused by parts tipping over when cutting thin sheet metal Ensures cutout pieces do not collide with the laser head ensuring permanent machine productivity Dynamic Motorized Lens PRIME features a dynamic motorized lens that automatically adjusts focus for different materials and thicknesses This innovation significantly improves laser cutting efficiency and reduces piercing time for thick sheets enhancing overall productivity Elevate your manufacturing units efficiency with Prime where innovation meets performance SpecificationAdditional Details a Model Prime b Laser Source Fiber c Laser Power 1 15 2 3 4 6 kW d Power Consumption 10 12 17 24 32 kW e Working Area X Y Z 2200 x 3100 x 300mm f Maximum Pipe size round 25 to 180mm g Maximum Pipe size square 25 to 150mm h Maximum Pipe size rectangular 25 to 150mm i Maximum Pipe Cutting Length 2500mm j Maximum Job Weight 70kg k Maximum Speed X Y Z 170mmin l Position Accuracy 005 mm m Repeatability 002 mm n Work Piece Weight 900 kg o Country of origin Made in India
Warm tip: BL-E99 is a home security anti-theft security system. It is burglar security alarm system which has 88 wireless can connect with other sensors like Magnetic door/window sensors, Smoke Detectors, gas detector, Infrared Sensors, remote control etc. in additional. When something happened in your home, the home wireless GSM alarm system can send the MMS to you. The wireless home safe alarm system compatible with all the GSM SIM cards, suitable for global users. arm/disarm each guarding zone independently, with 4 wired guarding zones for connecting wired sensors, Inform user if the power off via call/SMS, arm/disarm and program the system by control keyboard on the mainframe & phone .it is better choice for the user which doesn t need too much accessories. Main Function 1.With 2 wired zones for connecting wired sensors 2.SMS 5 phones automatically while alarming and drive wiretap. 3.Call 5 phones automatically while alarming and drive wiretap, Can clearly hear the voice. 4.Auto-dial 1 preset phone numbers of Alarm Center 5.Alarm panel with LCD display & keypad, easy to operate. 6.SMS alert & auto-dial alert when AC Power outage, AC power recovered 7.with standby rechargeable battery. The host automatically stores system status, while its power is off. 8.With wired MIC interface, switching the sound off and siren 9.Talkback Function: can speak with field person. 10.arm/disarm and program the system by control keyboard on the mainframe & phone & SMS & Remote controller 11.Timing arm/disarm function. 12.record function: Maximum recording time:20S 13.voice function:support play the user record voice. 14.Built-in high standard Internal Antenna with strong signal 15.original host operating system. 16.Chinese/English switch supported 17.with ROHS/CE/FCC certifications,conform to 3C Safety Standard and GB12663-2001 government 18. It can support IP P2P camera Standard Configuration: 1 X BL-E99 GSM control panel 1 X Wireless PIR motion detectors 1 X Wireless door/window magnetic sensor 2 X Wireless Remote controllers 1 X Mini siren with 110DB sounds 1 X Power adapter 1 X English user manual 1 X Brand new & neutral package box
Specificationsï¼? 1.Compatible with water, oil, universal and light solvent colorants 2.RS-232 Port or serial USB interface. 3.Qty of canister: 16/18/20 canister 4.Canister material: OPP plastic or stainless steel 5.Piston pumps body material: Stainless steel 6.Piston material: Double-decked PTFE 7.Min. accurate discharge: 1/384 of fluid ounce or ml 8.Max. pump discharge: 60ml or 2 fluid ounces per stroke 9.Nozzle purging: Automatic for single or all canisters 10.Colorant mixing: Automatic or manually controlled. 11.Max. paint container size: 320Ã?380mm 12.Voltage rang : 100V~ - 240V~ 50/60HZ 13.Max. power : 500W 14.Machine size: 1350ï¼?Hï¼?Ã?830ï¼?Wï¼?Ã?950ï¼?Dï¼?mm 15.Shipping size: 1450ï¼?Hï¼?Ã?880ï¼?Wï¼?Ã?1000ï¼?Dï¼?mm 16.Net weight: 165 kgs 17.Gross weight: 210 kgs Description: 1.The dispenser software is extremely flexible, is compatible with different tinting systems and can be easily interfaced with the majority of formula books and color matching software. 2.Usual operations as purging, dispensing, canister filling, colorant mixing etc. are easy and very quick to perform. 3.Operator errors are virtually eliminate by using real-time dispensing control and an accurate error handling software. 4.Access to last dispensed formulas, saved recipes and client files is unlimited. Formula information can be easily printed or stored for future usage. 5.Level of colorants in each canister can be visualized and managed at a glance. 6.Both the automatic purging function and accurate dispensing can work at the same time. 7.Full control on individual pumps and valves speed allows to perform accurate dispensing even with high viscosity colorants. 8.The dispenser is of intelligent and with color paste barrel recognition and automatic dosing functions.And the dispensing process is under real-time control for giving automatic fault alert and corresponding disposal measures. 9.The spray and seal needles are provided with automatic cleaning function.Alert for flushing the dispensing pots that are out of service within three days will be automatically given to keep spray needles not jammed.thus to ensure dispensing accuracy.
Latex surgical gloves powdered and powder free, latex examination gloves powder and powder free, (single, double, triple and quadruple cpda blood bag) , iv cannula , hypodermic single use syringes 2ml, 3ml, 5ml and 10 ml..
100% Pure Refined CORN Oil For Human Consumption ORIGIN: UKRAINE QUALITY: Established by the International Standards (SGS). Specification: Standard Form of Packing : â?¢ in PET bottles (1L, 3L, 5L) â?¢ in bulk in flexitanks Minimum Order Quantity: 250 MT Production Capacity: 50000 MT per month Shipping Terms FOB or CIF ASWP Payments terms: SBLC or DLC: MT 760 or MT 700 â?? Irrevocable, Unconditional, Transferable, Divisible, Operative, Revolving. Confirmed Bank TOP 50 for SBLC and for DLC confirmed Bank TOP 25. Inspection: SGS or Equivalent CiF PRICE USD: 960$ COMMISSION CHARGED SHIPMENT TIME within 10 days from LC DATE and DELIVERY within 25 to 35 days from the date of bill of ladings depending on the chosen port. NO, TTM/FTF Agricultural products offered by ECO PROM TRADE are grown in clean regions of Ukraine using innovative technologies focused on growing of high-quality crops that meet international standards. All of our products are certified. It is a liquid oil suitable for cooking, baking, frying, in making margarine or our refined corn oil can be bottled as a general-purpose oil, especially for products high in poly-unsaturated fatty acids. ECO PROM TRADE sells this high-quality oil at a very affordable price, we follow a strict procurement procedure that makes sure all our partners meet all food and health requirements in place. We sell refined corn oil, sunflower oil, canola oil, rapeseed oil, soybean oil and extra virgin oil in 1L, 2L, 5L, and 10L and different packaging options can be arranged upon request Specifications for Refined Corn Oil: â?¢ Relative density 0.917-0.925 â?¢ Refractive index (at 40oC) (at 25oC) 1.4650-1.4680 1.4740 1.4700 â?¢ Humidity and volatile substances (Max) 0.20% at 105 0C â?¢ Insoluble impurities including corn seed germ (Max) 0.50% Saponification value (mg potassium hydroxide / g oil) 187 193 â?¢ Unsaponifiable matters (g / kg) max 15.0 â?¢ Soap content (max) 0. 005% â?¢ Total acidity as oleic acid (max) 0.3% â?¢ Acid value (mg potassium hydroxide / g oil) max 0.6 â?¢ Peroxide value (ml equivalent active oxygen/ kg oil) max 10.0 â?¢ Iodine value (Wijs method) 103- 128 Acid % â?¢ Caproic acid (C0:6) â?¢ None Caprylic acid (C0:8) â?¢ None Capric acid (C0:10) â?¢ None Lauric acid (C0:10) â?¢ None 0.3 Myristic acid (C0:14) â?¢ None 0.3 Palmitic acid (C0:16) 8.6 16.5 â?¢ Palmitoleic acid (C1:16) â?¢ None 0.5 Heptadecenoic acid (C0:17) â?¢ None 0.1 Heptadecenoic acid (C1:17) â?¢ None 0.1 Stearic acid (C0:18) â?¢ None 3.3 Oleic acid (C1:18) 20.0-42.2 â?¢ Linoleic acid (C2:18) 34.0-65.5 â?¢ Linoleic acid (C3:18) None- 2.0 â?¢ Arachidic acid (C0:20) 0.3-1.0 â?¢ Gadoleic acid (C1:20) 0.2-0.6 â?¢ Eicosadienoic acid (C2:20) â?¢ None-0.1 Behenic acid None- 0.5 â?¢ Bihenic None 0.5 â?¢ Erucic acid (C1:22) â?¢ None 0.3 Docosadienoic (C2:22) â?¢ None Lignorceric acid (C0:24) None 0.5 Nev
6ml or 11ml syringe containing sterile gel with/without Lidocaine & CHG. 10 ml syringe containing Purified water with 10% glycerine solution. impregnated gauze dressing with paraffin. impregnated gauze dressing with CHA. impregnated gauze dressing with PVP-I. impregnated gauze dressing with Manuka Honey.
3 Double Lumen Catheter Curve / Straight Sizes: 11.5fr X 13cm, 13.5cm, 15cm, 16cm / 12fr X 16cm Contents: Double Lumen Catheter, Dilator's 10fr, 12fr, Catheter Protector Pouch St.Stone Medical 4 Triple Lumen Catheter Curve / Straight Sizes: 12fr X 15cm, 16cm Contents: Triple Lumen Catheter, Dilator's 10fr, 12fr, Catheter Protector Pouch St.Stone Medical 5 Double Lumen Catheter Kit Curve / Straight Kit Contents: Double Lumen Catheter, Hollow Introducer, Guidewire 0.035"X70cm, Introducer Needle 18gx7cm, Drape Sheet, Tegadram, Scalpel # 11, Dilators, Patient Id Card, Ifu, Catheter Protector Pouch St.Stone Medical 6 Introducer Needle (Adult) Sizes: 18g X 7cm St.Stone Medical 7 Introducer Needle (Padiatric) Sizes: 20g X 3.81cm St.Stone Medical 8 Transducer Protector Sizes: Standard St.Stone Medical 9 Fistula Needle Sizes: 16ga, 17ga St.Stone Medical 10 Central Venous Catheter Kit Contents: Double Lumen Cvc, Guiding Syringe, Guidewire 0.035"X70cm, Introducer Needle 18gx7cm, Drape Sheet, Tegadram, Scalpel # 11, Dilators, Patient Id Card, Ifu, Catheter Pouch St.Stone Medical 11 Spinal Needle Sizes: 18g-27g, Lengths 9cm-12.7cm St.Stone Medical 12 Guidewire Ptfe Coated (Angle/Straight) Sizes: 0.032", 0.035", 0.038" X 150cm St.Stone Medical 13 Guidewire Ptfe Coated (Angle/Straight) Sizes: 0.032", 0.035", 0.038" X 260cm St.Stone Medical 14 Angio / Ptca Kit Contents: Manifold 3 Gang Right Onn, P.M. Line 200cm,I.V. Set Non-Vented, 12ml Control Syringe, 5ml Syringe, 10ml Luer Lock, 3ml Luer Lock. St.Stone Medical 15 Stopcock Manifold 2 Gang Sizes: Right Off/Right On St.Stone Medical 16 Stopcock Manifold 3 Gang Sizes: Right Off/Right On St.Stone Medical 17 Ptca Y Connector Push Click Contents: Torque Devices, Blunt Needle, Y Connector St.Stone Medical 18 Ptca Y Connector Tuohy Borst Contents: Torque Devices, Blunt Needle, Y Connector St.Stone Medical 19 Introducer Needle (Adult) Sizes: 18g X 7cm St.Stone Medical 20 Introducer Needle (Padiatric) Sizes: 20g X 3.81cm St.Stone Medical 21 Pressure Monitoring Line Sizes: 25cm, 50cm, 100cm, 150cm, 200cm St.Stone Medical 22 3 Ways Stop Cock With Extention Line Sizes: 10cm, 25cm, 50cm St.Stone Medical 23 Control Syringe Sizes: 12ml St.Stone Medical 1 Ptfe Guide Wire 150cm/ 260cm (0.032 To 0.038) - St/ Jtip Medtronic 2 Inflation Devices (Plain/ Kit) Medtronic 3 Cougar Ptca Wire (0.014" X 180cm) Medtronic PAGE | 4 4 Guiding Catherter Medtronic 5 Diagnostic Catherter Medtronic 6 Introducer Sheath Medtronic 7 Export Catheter 6f.7f Medtronic 8 Sprinter Balloon Medtronic 9 Sprinter Nc Balloon Medtronic 10 Endavour Sprint Medtronic 11 Resolutes Intigrity Medtronic 12 Act Cartage Medtronic 1 Pacing Lead 5f, 6f St Jude 1 Ptfe Guide Wire 150cm/ 260cm (0.032 To 0.038) 150/260 - St/ Jtip Terumo 2 Ta Band Terumo 3 Radial Sheath Terumo 4 Tiger Catheter Terumo 5 Ryjin Plus Balloon Terumo 6 Hirayu Balloon Terumo 7 Progreat Catheter Terumo