The product is installed at the center of api tubings. Ideal for the protection of any size esp cables, control lines and chemical injection lines etc., it provides a safe and quick way of conveying and securing downhole cables into well-bores. Features: All cable protectors have double protection to resist corrosion All hinges are spot-welded to enhance the overall integrity of the product Spring friction pad gripping system for superior grip Slip and rotation resistant Non-destructive gripping action Designed to eliminate compression-reduced damages to the conductors Specifications: Manufactured of low carbon steel or stainless steel Available as cross-coupling and mid-joint protectors Suitable for api tubing sizes from 2 3/8" to 7" Configured for flat, round or square cables, chemical injection lines, umbilicals etc. Multichannel designis available to separate multiple lines Customized upon request
Standard taper thread couplers are designed to splice the same diameter bars where one bar can be rotated and the bar is not restricted in its axial direction.It is designed to achieve failure loads in excess of 115% of the caracterisitc strength of grade 500 rebar end. Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction. Taper Thread Working Principle: 1.Slice up the end of the rebar; 2.Make the rebar taper thread cutted by taper thread machine. 3.Connect together two taper thread end by One piece of Taper Thread Coupler. Taper thread position couplers are designed to quickly splice column sections or precision coupling of elements with multiple bars jointed over a short span, such as prefabricated elements, and the closing of small temporary openings.
Standard taper thread couplers are designed to splice the same diameter bars where one bar can be rotated and the bar is not restricted in its axial direction.It is designed to achieve failure loads in excess of 115% of the caracterisitc strength of grade 500 rebar end. Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction. Taper thread working principle: 1.Slice up the end of the rebar; 2.Make the rebar taper thread cutted by taper thread machine. 3.Connect together two taper thread end by one piece of taper thread coupler. Taper thread position couplers are designed to quickly splice column sections or precision coupling of elements with multiple bars jointed over a short span, such as prefabricated elements, and the closing of small temporary openings. -
Standard taper thread couplers are designed to splice the same diameter bars where one bar can be rotated and the bar is not restricted in its axial direction.It is designed to achieve failure loads in excess of 115% of the characterisitc strength of grade 500 rebar end. Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction. Taper Thread Working Principle: 1.Slice up the end of the rebar; 2.Make the rebar taper thread cut by taper thread machine. 3.Connect together two taper thread end by One piece of Taper Thread Coupler. Taper thread position couplers are designed to quickly splice column sections or precision coupling of elements with multiple bars jointed over a short span, such as prefabricated elements, and the closing of small temporary openings.
(1) The full-automatic cherry pitting machine adopts a device with high degree of automation and automatic feeding and feeding of mold conveyor belt to carry out transportation and core punching. It can complete the function of cutting most of the cranberries by pouring them into the feed hopper. It solves the difficulties of low efficiency, labor-consuming and time-consuming manual nuclear removal. (2) The structure of the full-automatic cherry enucleator is composed of 304 stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during startup and operation. All parts are fastened and assembled with bolts, making the equipment more convenient and fast in operation and maintenance. (3) The raw materials of the full-automatic cherry enucleator are made of 304 stainless steel, which fully meets the hygienic standards of food processing equipment. The conveyor belt is made of imported polyurethane, which is anti-wear, tensile and tear resistant, and has a longer service life. (4) The automatic cherry enucleator is simple and convenient to operate without long-term care. One person can manage multiple machines at the same time.
(1) The full-automatic Ximei nuclear remover adopts a device with high degree of automation and automatic feeding and feeding of mold conveyor belt for conveying and core washing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and meat. It can work continuously and solve the difficulties of low efficiency, labor-consuming and time-consuming manual nuclear removal. (2) The structure of the full-automatic Ximei nuclear remover is composed of 304 stainless steel thick wall square tube and channel steel welding, which enhances the stability of the equipment during startup and operation. All parts are fastened and assembled with bolts, making the equipment more convenient and fast in operation and maintenance. (3) The raw material of the equipment is made of 304 stainless steel, which fully meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane, which is anti-wear, tensile and tear resistant, and has a longer service life. (4) The automatic Ximei de coring machine is simple and convenient to operate and does not need to be watched for a long time. One person can manage multiple machines at the same time. The transmission system adopts the design concept and standardized components. The core punching principle adopts the process of machine tool to punch the core, so that each equipment meets the design standard and has high precision, so that the effect of de coring rate is good, and the shape of fruit is completely unchanged.
(1) The full-automatic Ximei nuclear remover adopts a device with high degree of automation and automatic feeding and feeding of mold conveyor belt for conveying and core washing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and meat. It can work continuously and solve the difficulties of low efficiency, labor-consuming and time-consuming manual nuclear removal. (2) The structure of the full-automatic Ximei nuclear remover is composed of 304 stainless steel thick wall square tube and channel steel welding, which enhances the stability of the equipment during startup and operation. All parts are fastened and assembled with bolts, making the equipment more convenient and fast in operation and maintenance. (3) The raw material of the equipment is made of 304 stainless steel, which fully meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane, which is anti-wear, tensile and tear resistant, and has a longer service life. (4) The automatic Ximei de coring machine is simple and convenient to operate and does not need to be watched for a long time. One person can manage multiple machines at the same time. The transmission system adopts the design concept and standardized components. The core punching principle adopts the process of machine tool to punch the core, so that each equipment meets the design standard and has high precision, so that the effect of de coring rate is good, and the shape of fruit is completely unchanged.
Manufacturer Henan UTERS Industrial Technology Co.,Ltd Brands UTERS / Negotiable Filter Type Hydraulic Oil Filter Element Size Data Please contact our sales manager if you need to confirm parameters. End caps Material Galvanized Carbon Steel; Stainless Steel; Nylon Plastic; Aluminum Machining And Other Standard Materials Frame Material Galvanized Carbon steel punching frame; stainless steel punching frame, etc. Filter Material 304 Stainless Steel Mesh; Glass Fiber; Oil Filter Paper And Other Standard Materials Filter Accuracy 1~100um; filtration ratio: Xâ?§100. Collapse Pres. 21bar~210bar Filter Media Conventional Hydraulic Oil, Lubricating Oil, Fuel, Etc. Operating T. -30â??~+100â?? Structure Strength 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa. Position On the suction line, pressure oil line, return line, bypass, and separate filter system. Application Steel, Electric Power, Metallurgy, Shipbuilding, Aviation, Papermaking, Chemicals, Machine Tools And Construction Machinery, Construction Machinery And Other Fields. Packing Plastic bag inside,paper box outside / Negotiable Transportation DHL, UPS, FEDEX, SF And Other International Express, By Air, By Sea, Or Special Line Services. Production Time 10 Work Days After Payment / Negotiable Warranty 12 months/ 365 days after shipment. Testing Standard ISO 2941 Filter element-Test method for filter element rupture resistance ISO 2942 Filter Element-Test Method for Structural Integrity of Hydraulic Filter Element ISO 2943 Filter Element-Test Method for Compatibility of Hydraulic Filter Element Material and Liquid ISO 3723 filter element-end-to-end compliance test ISO 3724 filter element-determination of fatigue characteristics ISO 3968 Filter Element-Differential Pressure Flow Characteristics ISO 4572 Filter Element-Multiple Pass Method for Determining Filtration Characteristics
Galvanized cable hook Mining metal hook Tunnel hook Single row double row hook Material: carbon steel plate Weight: 1.12kg Specification: 680mm*50mm*5mm Surface: galvanized Function: Cold stamping cable hook for suspension and protection of underground power supply cables in coal mines Mining metal cable hooks bundle various cables in the mine Communication cable hook Product description: It is made of hot-rolled flat steel with a stamping die to form a device for hanging cables on the right side. According to customer requirements, it is processed into a single row or multiple rows of arc-shaped hooks with holes fixed to the wall at both ends. Mold development and design Specification: Single row, double row, customized according to customer requirements Service: OEM ODM Non Standard Customized Processing Wire Cutting: Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: 0.02 mm Laser Cutting: Carbon Steel: 0.5 mm - 16 mm Stainless Steel: 1 mm - 8 mm Aluminum Alloy: 1 mm - 8 mm Brass: 1 mm - 4 mm Max Size: 4000 mm * 2000 mm Positioning: �±0.03 mm Repeated: �±0.02 mm Maximum Speed: 169 m/min Materials: Carbon Steel Plate /Galvanized Sheet / Aluminum Alloy Plate / Stainless Steel Plate / Copper Moulds: Stamping Die / Punching Mould / Bending Mold / Deep Drawing Mould / Blanking Mold / Die Cutting Processing: Laser Cutting / Stamping / Punching /Sheet Bending / Metal Forming / Metal Welding / Riveting Category: Cable Hooks / Metal Enclosure / Shims / Spring Pieces / Hinges / Embedded Parts / Gaskets / Clips Applications: Machinery / Equipment / Building / Electronic / Automobile / Medical Device / Handicrafts / Home / Decorative
pcb depanelizer for fpc,SMTfly-PE PCB Separator,PCB Depanelize,PCB Depaneling,SMTfly-PEFeatures: 1.Machine has strong structure and moves easily with 4 Casters. 2.can replace a variety of mold, and mold changing easily. 3.the lower mold automatic in and out, easy to pick and place products, finished products can fall into the drawer. 4.make internal stress generated by PCB cutting to minimize and avoid tin stress cracking. 5.punching cutting semi-finished PCB with high efficiency. 6.mould and die can be made according to customer's request. 7.Apply to cut Rigid pcb,Flexible pcb(FPC),Rigid-Flexible pcb 8.Use punching mould to cut with high efficiency 9.Can replace multiple mold for product pcb depanelizer for fpc,SMTfly-PEâ?? pcb depanelizer for fpc,SMTfly-PE Specification: Power: 110/220, 0.5KW/H Depression(Pa): 0.45-0.70 Machine dimension(mm): 730*810*1700 Contribute(T): 3-30 Weight(Kg): 530 Working area(mm): 330*220 Cycle time(s): 7 pcb depanelizer for fpc,SMTfly-PE pcb depanelizer for fpc,SMTfly-PE Our Service: # 1 day delivery # 24 hours fast response # Largest manufactory in South China # 100% responsible for quality # 14 years experience # Free sharpening for blades within 3 months
1, Product Information: ZHW stainless steel flexible joints have been designed to control vibration, reduce noise, relieve stress, prevent system shock and compensate for misalignment and movement. Use of braided metal connectors for applications such as pumps, compressors, and other mechanical equipment will enhance the overall operation of the system. Stainless steel flexible joints by itself, when subjected to high pressure can over-extend past the ability to operate properly. It is necessary, therefore, to include an external flexible restraint (i.e., braid) to withstand the specified internal pressure and prevent excessive elongation. Braid, (woven metal) is designed to fit snugly over metal hose and is fastened to the ends of both hose and fittings. This braid is designed to be strong enough to withstand elongation for the full pressure rating of the hose. 2, Product Description: ZHWs stainless steel flexible joints series SFH11 are specifically designed for piping applications requiring limited absorbtion of axial and lateral movements. are available with Stainless Steel 304/316 Series Braid. In order to increase the pressure resistance of the high temperature flexible hose, it is steel braided. Depending upon the pressure parameter in the application, the metal hose is designed using either single braid or double braid or multiple braids. ZHW manufactures wide range of braid constructions including 24 and 36 carriers. Bright annealed and high tensile wires are used for the production of metal braids. Once the metal hose is welded with the stainless steel braid, it can absorb mild vibrations and movements, and also act as a protective covering to the relatively thin walled hose.
1, Product Information: ZHWs stainless steel flexible joints series SFH11 are specifically designed for piping applications requiring limited absorbtion of axial and lateral movements. are available with Stainless Steel 304/316 Series Braid. In order to increase the pressure resistance of the high temperature flexible hose, it is steel braided. Depending upon the pressure parameter in the application, the metal hose is designed using either single braid or double braid or multiple braids. ZHW manufactures wide range of braid constructions including 24 and 36 carriers. Bright annealed and high tensile wires are used for the production of metal braids. 2, Product Description: The metal hose is made of austenitic stainless steel, thus ensuring the heat resistance and excellent corrosion resistance of the hose, the hose is extremely wide range of working temperature, corrosion resistance, high temperature resistance, low temperature (-196 DEG ~+600 DEG), light weight, small volume and good flexibility. Widely used in aviation, aerospace, petroleum, chemical, metallurgy, power, paper making, timber, textiles, construction, medicine, food, transportation and other industries.
CE Approved Drug of Abuse Test is a qualitative immunoassay for detection of specific drugs present in human urine or saliva at the cutoff concentration of the drug specified. The drug test kit is available in strip, panel, cassette and cup format. Indications for Use (DOA) Drug of Abuse Test are for the detection of drug like COC AMP MOP TH MET OPI BAR BZO MTD MDMA TCA OX BUPPCP EDDP. Application Public security departments and anti-drug agencies to screen suspicious groups; Conscription and admission physical examination; Drug rehabilitation machine purchase treatment monitoring; General survey, screening and physical examination of medical, health and epidemic prevention departments. Format: strip, panel, cassette and cup Storage: store between 2â?? and 30 â?? Shelf life: 2 years Advantages Accurate results: according to international drug abuse monitoring standards; Good specificity: select monoclonal antibody with high specificity to minimize possible crossover; Easy to operate: do not need any equipment and additional testing; Samples are easy to collect and can be tested on site; Fast detection: 5 minutes to interpret the results, saving time; Joint testing: multiple drugs can be screened at once.
Applied for inflatable bed, swimming ring, inflatable floating, inflatable water trampoline, inflatable water roller, inflatable castle, inflatable slides, inflatable water slides, inflatable water park, inflatable pool slides, inflatable bouncy castle, inflatable jump bed welding and jointing. 1, simple to setup and easy to operate. 2, firmly welding , meet the needs of different thickness of materials. 3, with current limit system, when the high frequency current reaching a high value automatically cut off and protection products to avoid excessive current lead scrap 4, automated weld cycle with multiple recipes 5, it is automatic one of the work tables. 6, european standard high frequency oscillatory square cabinet, more reliable and stable in output. 7, ultra fast sensitive anti spark system. Technical specification: Model:Cn-100kwt Maxpressure:10t Power:100kw Max gap of electrodes:150mm Power supply:220/380v*3p 50/60hz Size of active horn:150mm Frequency:27.12mhz Size of up electrode:2000*2200mm Input power:150kva Size of working table:2100*2300mm Rectifier:Silicon diode Net weight:12t Vibrational tube:9t94a Weld time:0-10s adjustable Driven mode:Pneumatic
Applied for medical bag and blood PVC bag, urine bag, infusion bag etc welding and jointing. 1. Simple to setup and easy to operate. 2. Firmly welding ,meet the needs of different thickness of materials. 3. With current limit system, when the high frequency current reaching a high value automatically cut off and protection products to avoid excessive current lead scrap 4. Automated weld cycle with multiple recipes 5. Fully H.F Shielded and filtered work area. 6. European standard high frequency oscillatory square cabinet,more reliable and stable in output. 7. Ultra fast sensitive anti spark system. 8. With Auto slide table. Technical Data MODEL:CN-10GL-Q2 MAXPRESSURE:600KG POWER:10KW MAX GAP OF ELECTRODES:150MM POWER SUPPLY:220/380V*3P 50/60HZ SIZE OF ACTIVE HORN:150MM FREQUENCY:27.12MHz SIZE OF UP ELECTRODE:400*550MM ELETRONIC POWER:15KVA SIZE OF WORKING TABLE:600*800MM RECTIFIER:SILICON DIODE NET WEIGHT:850KG VIBRATIONAL TUBE:E3069 WELD TIME:0-10s Adjustable DRIVEN MODE:Pneumatic FORESEEN PRODUCTIVITY:5PCS/MIN
Standard taper thread couplers are designed to splice the same diameter bars where one bar can be rotated and the bar is not restricted in its axial direction.It is designed to achieve failure loads in excess of 115% of the caracterisitc strength of grade 500 rebar end. Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction. Taper Thread Working Principle: 1.Slice up the end of the rebar; 2.Make the rebar taper thread cutted by taper thread machine. 3.Connect together two taper thread end by One piece of Taper Thread Coupler. Taper thread position couplers are designed to quickly splice column sections or precision coupling of elements with multiple bars jointed over a short span, such as prefabricated elements, and the closing of small temporary openings. Taper thread anchor plate provides an alternative to hooked rebar,or an anchor or stop nut for rebar passing through a pile bank or structural steel element.The fraont face of the coupler is generously designed to carry the full tension load of the rebar when the anchor is bearing against concrete or structural steel.
Standard taper thread couplers are designed to splice the same diameter bars where one bar can be rotated and the bar is not restricted in its axial direction.It is designed to achieve failure loads in excess of 115% of the caracterisitc strength of grade 500 rebar end. Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction. Taper Thread Working Principle: 1.Slice up the end of the rebar; 2.Make the rebar taper thread cutted by taper thread machine. 3.Connect together two taper thread end by One piece of Taper Thread Coupler. Taper thread position couplers are designed to quickly splice column sections or precision coupling of elements with multiple bars jointed over a short span, such as prefabricated elements, and the closing of small temporary openings. Taper thread anchor plate provides an alternative to hooked rebar,or an anchor or stop nut for rebar passing through a pile bank or structural steel element.The fraont face of the coupler is generously designed to carry the full tension load of the rebar when the anchor is bearing against concrete or structural steel.
Standard taper thread couplers are designed to splice the same diameter bars where one bar can be rotated and the bar is not restricted in its axial direction.It is designed to achieve failure loads in excess of 115% of the caracterisitc strength of grade 500 rebar end. Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction. Taper thread working principle: 1.Slice up the end of the rebar; 2.Make the rebar taper thread cutted by taper thread machine. 3.Connect together two taper thread end by one piece of taper thread coupler. Taper thread position couplers are designed to quickly splice column sections or precision coupling of elements with multiple bars jointed over a short span, such as prefabricated elements, and the closing of small temporary openings. Taper thread anchor plate provides an alternative to hooked rebar, or an anchor or stop nut for rebar passing through a pile bank or structural steel element.The fraont face of the coupler is generously designed to carry the full tension load of the rebar when the anchor is bearing against concrete or structural steel.
CERAMIC FIBER PAPER TOPWOOL Ceramic fiber paper,pure white colour, completely free of asbestos ,a lightweight refractory material processed form a blend of high purity alumina-silica fibers into a highly flexible uniform sheet ,excellent slag elimination technology, made from high-purity ceramic fiber by adding a small amount of binder which makes it flexible, and reduces off-gassing and odor during use, Excellent thermal insulation properties and construction performance, suitable for use in deep processing (multi-layer composite, punching, etc.); and excellent resistance to molten infiltration, allowing itself to be used for casting washer separation in the construction and glass industries. Size and Specifications: Lengthx Thickness: 60mx1mm, 30mx2mm, 20mx3mm, 15mx4mm, 12mx5mm, 10mx6mm Width: 610mm or 1220mm Other size pls contact us freely Characteristics: (1) Excellent electrical insulation properties (2) Excellent thermal stability; (3) Excellent tensile strength; (4) Low thermal conductivity; (5) Low thermal capacity; (6) High flexibility (7) Low slag content Typical Use (1) Industrial insulation, sealing, anti-corrosion material (2) Insulation material for instruments and heating element (3) Insulation material for automobile and aerospace industry (4) Expansion joints filling material (5) Molten metal sealing gasket (6) Fireproof material (7) Substitute for glass fiber and asbestos fiber (8) Insulation for construction material, metallurgy and glass industries PACKAGE & DELIVERY 1 . Carton box packge is made from 5 layer kraft paper to gurantee goods' safety during long distance sea delivery. 2. Shipping mark and packing details will according to clients requirements to design. All transaction due to late delivery or bad quality will be compensated by 100% payment return - Lengthx Thickness: 60mx1mm, 30mx2mm, 20mx3mm, 15mx4mm, 12mx5mm, 10mx6mm Width: 610mm or 1220mm
1.product description IWD-300 barrier gate control radar is developed for the entrance and exit management of parking lots or underground garages. It can precisely control the rising and falling of the gate rod by cooperating with the main control board of the gate control system, effectively avoid the "accidental injury" of the gate rod to the passing vehicles or pedestrians in the radar field of view,and realize intelligent anti smashing. IWD-300 radar adopts the highly integrated RF chip SOC scheme, which has the characteristics of small size, low cost, all-weather work, high detection sensitivity, high precision, easy to debug and installation, very good stability and reliability. The working frequency of the radar is 77-81Ghz, with Linear Frequency Modulation and Continous Waveform,which make the available bandwidth up to 4GHz.The range resolution is up to 4cm, and ranging accuracy is better than 2cm; millimeter wave antenna adopts multiple transmitting and multiple receiving mode, with high angular resolution and angle measuring accuracy; signal processing and control unit adopts DSP + arm dual core architecture. Through the joint optimization design of software and hardware, this product can accurately identify and distinguish the pedestrian, vehicle and other targets passing through the brake lever area, and avoid the phenomena of "smashing the vehicle", "smashing the person" and "not dropping the lever". 2.Technical Specifications Input Voltage(Volts) 10~16 Temperature Range()-40~85 Power(W)< 2.5 Water Rissistance LevelIP67 Connection InterfaceRS485 Size(mm) 107.5*73.2* 18
