Comparing with conventional tubing pump, sucker rod pump has better performance in corrosion resistance & anti-friction aspect. Plunger of it is nickel plated on alloy base, inside wall of barrel is plated with hard cadmium, key parts, such as valve hood, valve ball, are made of materials with excellent mechanical performance and corrosion resistant property. Compared with conventional pump, the series of pump has a longer working life. The pump adopts two pumps in series with different diameters to form a double-pump and single-action pump. During the operation, the upper and lower pumps suck and drain liquid simultaneously. The tail pipe is connected under the pump and a packer is installed between the tail pipe and the casing to separate the upper and lower oil level to realize separate layer production, which avoids the inference of layer difference and improves the pumping efficiency. Product Description: API-RHAM, Rod, Stationary Heavy Wall Barrel, Mechanical Top Anchor Pump API-RHAC, Rod, Stationary Heavy Wall Barrel, Cup Top Anchor Pump API-RHBM, Rod, Stationary Heavy Wall Barrel, Mechanical Bottom Anchor Pump API-RHBC, Rod, Stationary Heavy Wall Barrel, Cup Bottom Anchor Pump API-RWAM, Rod, Stationary Thin Wall Barrel, Mechanical Top Anchor Pump API-RWAC, Rod, Stationary Thin Wall Barrel, Cup Top Anchor Pump API-RWBM, Rod, Stationary Thin Wall Barrel, Mechanical Bottom Anchor Pump API-RWBC, Rod, Stationary Thin Wall Barrel, Cup Bottom Anchor Pump API-RHBM-AC, Rod, Stationary Heavy Wall Barrel, Mechanical Bottom Anchor And Cup Top Anchor Pump Sucker rod pump is equipped with a seating nipple(there are two seating nipples in API-RHBM-AC) , seating nipple connection is on the tubing string, down to the bottom of the well with the tubing string. Plunger assembly connection is on the sucker rod string and with the pump overall down to seating nipple position together , pump with fixed inside the seating nipple.Plunger assembly with the sucker rod string up and down reciprocating movement to achieve pumping work. If the pump meet quality problem, it needn't to put forward the tubing string, only need to put the whole pump forward well through the sucker rod string together , operation is simple. Main parts process and material: Pump barrel: plain carbon steel plating (A1), ordinary carbon steel carbonitriding (B1), ordinary carbon steel carburizing (B2), low alloy steel nitride (B5). Plunger: 1045 steel spraying (B1), 1045 steel spraying (B2), 1045 steel chrome plating (A1), 1045 steel double chrome plating (A2). Valve ball and seat: stainless steel (A1), cobalt chromium (B2), tungsten carbide (C1), nickel and carbon compounds (C2), titanium carbide (C3). Other accessories: plain carbon steel, low alloy steel, stainless steel, brass and other materials.
1. Copper Cathode Grade A / ASTM B115 00. 5. Weight of each sheet: 125kgs 1% net 2. Copper Cathodes 99.99% 6. Weight of each pallet: 2m 1% 3. 99.99% ASTM B115 UNS No C11040 ASTM B49-08a. 7. Minimum weight of each container of copper cathode: 20 MT approx. 4. Electrolytic Grade A: Premier degree size: 914mm x 914mm x 12mm (approx.) (36 x 36 x0.5) 8. Gross weight of each container: 22.2m/t approx. 1. Quantity 500 to 5,000 MT monthly 2. Trial Order MIN. 500 MT 3. Performance Bond 2 % Against DLC for Deliveries Equal to or above 500 MT. 4. Price LME Less 14-17 %, Net to Buyer for Trial and Regular Deliveries 5. Payment Irrevocable, Confirmed, Negotiable & Non-Transferable Letter of Credit (DLC) MT 700 under MT 103/TT Release 6. Country 7. Loading Port 8. Destination Port CIF Buyers Destination Port 9. Payment Terms 100% Settlement at destination port against Bill of Lading, Final SGS Assay Report, Export Permit, Certificate of Origin & Invoice. 1. COPPER (Cu) :99.99% 9. Antimony (SB) :0.1PPM 2. Magnesium (Mg) :0.4PPM 10. Selenium (SE) :0.3PPM 3. Aluminium (Al) :0.5PPM 11. Nickel (Ni) :0.2PPM 4. Manganese (Mn): Lessthan0.1PPM 12. Lead (PB) :0.2PPM 5. Bismuth (BI) :0.1PPM 13. Iron (Fe) :2PPM 6. Arsenic (AS) :0.1PPM 14. Sulphur (S) :4PPM 7. Cobalt (CO) :0.2PPM 15. Silver (AG) :10PPM 8. Silica (SI) :0.3PPM 16. Gold (Au) :0.1PPM 1. Export Permit 4. Copies of Bill of Lading (B/L) 2. Mineral Analysis Report 5. Invoice 3. Certificate of Origin 6. Assay report of quantity, quality and stuffing photos of the cargo into the containers with all container numbers at the Loading Port
Induction brazing is a process that uses induction heating to join two or more metals. Induction heating uses an electromagnetic field to provide heat without contact or flame. Induction brazing is more localized, repeatable and easier to automate than traditional torch brazing. Induction brazing has been around for a long time, but is only now becoming widely available due to advances in induction heating power sources. The principle of induction brazing is similar to that of a transformer, where the inductor is the primary winding and the heated part acts as a single-turn secondary winding. Solutions for induction brazing of workpieces using Copper and copper alloys Brass Aluminum Iron Steel, stainless steel and all types of carbide Tungsten Chromium Nickel and nickel alloys Cobalt and precious metals Dissimilar metal brazing applications Common applications for induction brazing New applications for induction brazing are discovered every day, but here is a list of common induction brazing applications. Back-bending brazing using induction heating equipment. Brazing copper heat transfer tubes Brazing copper heat exchanger tubes in refrigeration units and custom trucks Multi-strand brazed flat copper wire and squirrel cage rotors for motor and transformer manufacturing Brazed busbars Brazed brass threaded fittings in various piping systems Brazed carbide pins for road construction Carbide blade fabrication Steel pipe assemblies Large motor and transformer repair, such as wind turbines, hydro turbines, nuclear transformers, mining equipment and agricultural equipment Electric and hybrid vehicle manufacturing Medical device manufacturing The benefits of induction heating for brazing Induction brazing offers many advantages over flame brazing or furnace brazing. This short list may cause you to reconsider your current manufacturing process:. Faster production More precise brazing Create superior joints with consistent heat Easily set up reproducible processes Improve energy efficiency and reduce utility costs Improve worker safety Reduce downtime Improves equipment reliability
Chromic catgut sutures Absorbable sutures Description: Fosmedic chromic catgut sutures is a fast absorbing surgical gut suture composed of highly purified connective tissue (mostly collagen) derived from beef intestines. Fast absorbing surgical gut sutures are sterile and elicit only a slight to minimal tissue reaction during absorption. Technical details : Product, chromic, Â catgut, Â sutures Suture, Â characteristics, absorbable, Â surgical, Â suture Suture, Â type, monofilament Suture, Â material, catgut, Â chromic Suture, Â color, brown Absorption, completely, Â absorbed, Â in, Â 70, Â days Tensile, Â strength, tensile, Â strength, Â is, Â retained, Â for, Â 7, Â -, Â 14, Â days. Usp, Â range, usp2~usp6/0 Sterilization, gamma, Â rays, Â of, Â cobalt, Â 60. Shelf, Â life, Â , 3, Â years Needle, Â type, all, Â needle, Â profiles, Â conforming, Â to, Â usp, Â standards. Thread, Â length, 45cm, 75cm, 150cm Needle, Â length, 13mm-50mm Packaging, in, Â aluminium, Â foil, Â packages, Â with, Â or, Â without, Â needle , 12, Â units, Â in, Â one, Â box, Â , 50, Â boxes, Â in, Â one, Â master, Â carton
HBIS Lines Up Investment in Peru Iron Ore Mine HBIS Resources Co Ltd, a unit of China second-biggest steelmaker HBIS Group, said on Monday it had signed an initial deal to develop the Pampa de Pongo iron ore mine in Peru alongside current licence-holder Zhongrong Xinda. The two Chinese companies plan to set up a joint venture to work on the first stage of the mine, which also contains copper, cobalt and gold reserves, an HBIS Resources filing to the Shenzhen Stock Exchange showed. The scope of cooperation includes mine and port construction and operation, it added. No value was put on the framework agreement, which was signed on July 31 and will serve as a basis for negotiations between the two firms. Investing in Peru, the worlds second-biggest copper producer after neighbouring Chile, would be HBIS first foray into South America. It coincides with steady demand from Chinese steel mills as prices of iron ore, the main steel-making ingredient, top $100 a tonne. Qingdao-based Zhongrong Xinda acquired the rights to Pampa de Pongo in 2016 and its subsidiary Jinzhao Mining Peru is the projectâ??s operator. A portfolio published by Peru Ministry of Energy and Mines in October 2018 said Pampa de Pongo, in the Arequipa region, could produce 28.1 million tonnes of iron per year and was expected to start operations in 2023. It put the investment required at $2.2 billion. Peru in mid-March imposed a mining lockdown to curb the spread of the new coronavirus, but has since eased restrictions. The country has reported more than 400,000 confirmed coronavirus cases and more than 18,000 deaths from covid-19, the respiratory disease the virus causes.
Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pressure, wear resistance, corrosion prevention against H2S and CO2, especially wellhead and Christmas tree valves have higher requirements. Tungsten carbide is one of the most important raw materials for cemented carbide. It's a black hexagonal crystal with metallic luster, chemical stability, hardness and diamond similarity, and it's also a good conductor of electricity and heat. In tungsten carbide, carbon atoms are intercalated into the gap of the tungsten metal lattice without destroying the crystal lattice of the original metal, thereby forming a gap solid solution, and thus the tungsten carbide is also called an interstitial compound (or an intercalation compound). Tungsten carbide is suitable for machining at high temperatures-- it can make cutting tools, structural materials for kiln, jet engines, gas turbines, nozzles, etc. The hardness of cobalt-based carbonized tungsten alloy powder or nickel-based carbonized tungsten alloy powder and chromium-based carbonized tungsten alloy powder sprayed by HVOF tungsten carbide coating can reach 850 degrees of high temperature of HV1200. Therefore, the valve parts are resistant to abrasive, corrosion, high temperature and oxidation. The process exceeds the processes of manual surfacing, chrome plating, carburizing, quenching and tempering, etc., so that the production efficiency can be increased by more than 2 times, the production cost can be reduced by more than 50%, and the service life can be extended by several tens of times.
Stainless steel Valve Seats Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve. PRODUCT PARAMETERS Tungsten carbide is one of the most important raw materials for cemented carbide. It's a black hexagonal crystal with metallic luster, chemical stability, hardness and diamond similarity, and it's also a good conductor of electricity and heat. In tungsten carbide, carbon atoms are intercalated into the gap of the tungsten metal lattice without destroying the crystal lattice of the original metal, thereby forming a gap solid solution, and thus the tungsten carbide is also called an interstitial compound (or an intercalation compound). Tungsten carbide is suitable for machining at high temperatures-- it can make cutting tools, structural materials for kiln, jet engines, gas turbines, nozzles, etc. The hardness of cobalt-based carbonized tungsten alloy powder or nickel-based carbonized tungsten alloy powder and chromium-based carbonized tungsten alloy powder sprayed by HVOF tungsten carbide coating can reach 850 degrees of high temperature of HV1200. Therefore, the valve parts are resistant to abrasive, corrosion, high temperature and oxidation. The process exceeds the processes of manual surfacing, chrome plating, carburizing, quenching and tempering, etc., so that the production efficiency can be increased by more than 2 times, the production cost can be reduced by more than 50%, and the service life can be extended by several tens of times.
The Advantages Of PCBN Cutting Tools, CBN Inserts Long Tool Life. CBN cutting tools have properties which resist chipping and cracking and provide uniform hardness and abrasion resistance in all directions. They may outperform conventional cutting tools by as much as 50 times. Reduced tool wear results in closer tolerances on work pieces, and fewer tool adjustments keep machine down-time to a minimum. The increased reliability of CBN cutting tools makes them a major factor in automating machining operations. Cutting Hard, Tough Materials. CBN cutting tools are so hard that they can efficiently machine steel with hardness of Rc 45 and above. CBN is also used for machining cobalt-base and nickel-base high-temperature alloys with hardness of Rc 35 and above. Many of these materials are so hard and tough that they must be machined at relatively low speeds. Conventional grinding is also used but is a relatively slow metal-removal process. CBN cutting tools have a high resistance to impact and therefore can machine parts with interrupted cuts and tough abrasive scale. High Quality Products. Because the cutting edges of CBN cutting tools wear very slowly, they produce high-quality parts faster and at lower cost per piece than do conventional cutting tools. The need for the inspection of parts is greatly reduced as is the adjustment of the machine tool to compensate for cutting-tool wear maintenance. This results in better control over work piece shape and size, which produces consistent part quality far beyond that possible with other cutting tools. Uniform Surface Finish. Surface finishes of less than 10 micron. are possible, which often eliminate the need for relatively slow finishing operations such as conventional grinding.
Name: Solid CBN inserts Brief Introduction: solid cbn inserts are used for rough and finish machining of hard steel ,cast iron and hard surface workpiece. type: RNMN,SNMN,TNGN,CNMN,RCMN,RCMX application: turning hard steel,cast iron Details Cubic boron nitride inserts (CBN Inserts) is a high-performance type of cutting tool material from a polycrystalline mass. CBN is a high hardness, high heat resistance crystal synthesized by boron and nitrogen under high temperature and high pressure. Applications of solid CBN inserts: Processing workpiece: rough and finish machining of the hard steel ,cast iron and hard surface workpiece. Processing materials: ferrous materials possessing hardness from approximately 45 HRC as well as gray cast iron, Cr-chilled cast iron and wear alloys on a cobalt, nickel or iron basis. Usages of PCBN inserts: 1.PCBN bladesare mainly using in processing of hardened steel whose hardness is of HRC50-60. such as: carbon tool steel, bearing steel, die steel, high-speed steel and so on. It also using in processing of gray cast iron, ductile iron, chilled cast iron, and other high temperature alloy and so on. 2.PCD toolsare using in cutting of non-ferrous metals (such as copper, aluminum, magnesium, etc.) and non-metallic materials (such as fiberglass, ceramics, reinforced plastics, etc.) Please don't hesitate to contact me if you have any needs:miya AT moresuperhard.com Our company also produces a series of diamond and CBN tools,welcome to consult and choose at any time Solid CBN-
Fanso Global Limited (FG) copper cathodes are known for high purity and consistent quality. Our Copper cathodes are produced using the Mount ISA electro-refining process and are 99.99% copper purity levels that meets the international quality standards BS 6017 1981 (1989) and u-Cath-1 / ASTM B-115 (1999) and are registered as LME A Grade. They are high grade and have the lowest levels of various group and individual impurities. Fanso Global Limited (FG) Copper cathodes are used in the manufacture of continuous copper rods for the wire, cable and transformer industries, and copper tubes for consumer durable goods and other applications in the form of alloys and sheets. SPECIFICATION OF COPPER CATHODE Product: Copper Cathodes Grade A (Electrolytic Copper Grade) (LME standards) Standard Cu Cathode-1, purity 99.99% Dimension: 914mm x 914mm x 12mm (LME standards) Weight of each sheet: 125kgs (+/- 1%) Net weight of each pallet: 2mts (+/- 1%) Min. weight in each container: 20mts approx. Gross weight of each container: 22.20mts approx. Packing: palletized banded by aluminum bands 2. CHEMICAL COMPOSITION Copper (Cu) : min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S:.............................. 4 PPM Iron Fe:..............................2 PPM Silver(Argent) Ag::..............................10 PPM Lead Pb:..............................0.2 PPM Nickel Ni:..............................0.2 PPM Selenium Se:..............................0.3 PPM Antimony Sb:..............................0.1 PPM Silica Si:..............................0.3 PPM Cobalt Co:..............................0.2 PPM Arsenic As:..............................0.1 PPM Bismuth Bi:..............................0.1 PPM Manganese Mn:..............................0.1 PPM Tellurium Te:.............................. 0.05 PPM Aluminum Al:.............................. 0.5 PPM Magnesium Mg:.............................. 0.4 PPM Zinc Zn:.............................. 0.4 PPM -
ORTHOSYN MTP PROSTHESIS Modular Replacement of the First Metatarsophalangeal Joint Orthosyn MTP is a modular joint replacement for the first metatarsophalangeal joint intended for use in patients with hallux rigidis or other destructive conditions of the joint. The components are modular and can be used for either hemi- or total joint replacement. The total joint includes a polyethylene articulation. Stems are titanium and uncemented; the bearing surface is cobalt chrome. Indications: Hemiarthroplasty Hallux rigidus with mild to moderate arthrosis Advanced arthrosis, with a good weight-bearing layer of suchondral bone in the head of the 1st metatarsal Post-traumatic arthrosis Salvage operation following hallux valgus operation with trimming or arthrosis Total joint replacements Hallux rigidus with moderate to severe arthrosis Pronounced post-traumatic arthrosis Rheumatoid arthritis Salvage operation in the presence of major destruction of joint proportions Revision of silicone rubber or metal joint implants REF PRODUCT DESCRIPTION 66.890.006 metatarsal head 8mm 66.890.007 metatarsal head 7mm 66.890.008 metatarsal head 6mm 66.890.210 metatarsal component S 66.890.220 metatarsal component M 66.890.230 metatarsal component L 66.890.240 metatarsal component XL 66.890.115 phalanx insert 15-5.0mm 66.890.125 phalanx insert 15-6.0mm 66.890.135 phalanx insert 15-7.5mm 66.890.145 phalanx insert 15-9.0mm 66.890.010 phalangeal component S 66.890.020 phalangeal component M 66.890.030 phalangeal component L 66.890.040 phalaheal component XL REF DORSAL FLEXION SYSTEM 66.890.300 metatarsal head DF 10mm 66.890.310 metatarsal head DF 20mm 66.890.320 metatarsal head DF 30mm 66.890.330 metatarsal head DF 40mm 66.890.340 metatarsal DF component 7.5mm 66890350 metatarsal DF component 9.5mm 66.890.360 phalanx total 10mm 66.890.370 phalanx total 20mm 66.890.380 phalanx total 30mm 66.890.390 phalanx total 40mm 66.890.400 phalangeal component 7.5mm 66.890.410 phalangeal component 9.5mm
Principle: Aczets Karat tester can distinguish the real precious metal from the fake material. The result is based on the specific gravity of the sample. USB Connection: USB also be connected to this device for easy operation ( Data Transfer). Ease: Thanks to its inbuilt measuring software which makes it easy to operate. Application: It can be used in: Gold Valuer Jewellery Showroom Bank & Financial Institution Fake Gold Detector Pawn Shops Optional: Non-editable software connectivity to human errors. FUNCTIONS: GOLD- Users can select either copper or silver individually or both as mixed material in GOLD for purity measurement. PLATINIUM- Users can select either palladium or Ruthenium or Cobalt individually as mixed material in PLATINUM for purity measurement. Advantages: To Detect Fake Gold Jewellery. To determine the purity of GOLD in % / Karat. Non-destructive. Precious metals like Platinum & Silver can be tested in Optional mode. It can be used as a normal scale or Densimeter as the need arises.
Permanent Magnet Compared with soft magnets, powerful permanent magnets (also called hard magnets) should have maximum Coercivity (HcB), high Remanence (Br), high magnetic energy product (BH) Max and wide hysteresis loop to ensure maximum magnetic energy storage and magnetic stability. Permanent magnets can be divided into ferrite, rare earth strong permanent magnets (samarium cobalt and NdEeB) and AlNiCo magnets. Sintered neodymium magnet is popular as the strongest permanent magnets in the world. Neodymium rare earth permanent magnets are widely used as the type of ordinary magnets(including disc, rings, blocks, arcs) and magnet assemblies(such as cup magnets, hook magnet...). Different Types of Permanent Magnet for Sale Neodymium Magnets Neodymium( NdFeB) magnet is the most sold and used rare earth industrial permanent magnet in the market, its magnetic energy product range from 33MGOe of N35 neodymium magnets to 53MGOe of N52 neodymium magnets. The maximum operating temperature of NdFeB magnets ranges from 80 â?? for the N series to 230 â?? for the AH series. Electroplating is a unique feature of permanent neodymium magnets, The processing performance of neodymium-iron-boron material is stronger than other types of magnets.
Brief Introductions: Type: PCBN Inserts Application: ferrous materials machining Specification: Customized Brand Mark: Moresuperhard Trade Terms: FOB Packages: Hard carton Delivery Time: 15 workdays by express Introductions of Moresuperhards PCBN Inserts Machining ferrous materials. Such as gray cast, cast iron, carbon steels, quenched steel, nickel and cobalt, other kinds of ferrous metal, etc. More Superhard PCBN inserts are widely used in automotive, medical and aerospace machining industries. Such as Shafts, gears, bearings, dies, molds Clutch plates, brake rotors and drums, cylinder blocks, flywheels heads Camshafts, valve bodies, impellers, casings, valve guides Turbine blades, vanes, shrouds, housings, hip joints, pipe and liners, fuel rod Valves seats, hydraulic pumps, cam lobes Extrusion screws, barrels, turbine, case, housings, compressor hubs insert type size info L (mm) I.C (mm) S (mm) R (mm) D (mm) TNGN110304 11 6.35 3.18 TNGN110308 11 6.35 3.18 TNGN110312 11 6.35 3.18 TNGN160404 16 9.25 4.76 TNGN160408 16 9.25 4.76 TNGN160412 16 9.25 4.76 Advantages of Moresuperhards PCBN Inserts Strong corrosion resistant, perform a good thermal stability and red-hardness CBN cutting tools have properties which resist chipping and cracking and provide uniform hardness and abrasion resistance in all directions. They may outperform conventional cutting tools by as much as 50 times. The high chemical stability allows for PCBN to be stable up to 1000 C and no reaction with Fe, Ni, CO etc. Cutting hard and tough Materials. CBN cutting tools are so hard that they can efficiently machine steel with hardness of Rc 45 and above Easy grinding and EDM cutting. Uniform surface finish, surface finishes of less than 10 micron Service: Detailed Specifications can be customized! Provide after-sales service. Technical support on usage. Return and exchange of products for non-human reasons. About us: MORESUPERHARD is a professional manufacturer of grinding, cutting, polishing and dressing tools. Thanks to abundant experience in surface treatment, we design and offer a complete grinding and dressing solution to our customers in various industries. With innovative and creative development conception, MORESUPERHARD is tirelessly striving to provide excellent design, superior quality and perfect service to world-wide customers. More than 1000+ customers benefit from our professional technical services.
we are export: Ready Made Garments Product, Yarn and Fabric. Supply All kind of Paper For Printing and Packaging, Yarn, Textured Yarn, Spun polyester, Cotton Yarn, Filament Yarn, weft and warp Yarn, Petrochemicals Product PP, LLDPE, HDPE, HIPS, Commodities Product Corn, Wheat, Wheat Flour, Soybean seeds, Sunflower seeds, Rape seeds Vegetable Oil, Cooking oil, Soybean Oil, Sunflower oil, Rapeseed oil, Sorghum, Barley, Rice ,Sugar, Burley , Sugar Beet Pulp, Milk Powder , Oats, Edible Oils, Coffee, Cocoa Petroleum Product 60/70 Bitumen, Diesel 50 ppm, Gasoline 93/95, Diesel fuel EN590, Aviation turbine fuel. (Jet A1), Gasoline 95, AVIATION KEROSENE JET FUEL, MAZUT, D6 VIRGIN FUEL, LIQUEFIED PETROLEUM GAS, LIQUEFIED NATURAL GAS, BASE OIL, EN590 10 PPM. Petroleum, Crude oil, gas condensate Mining Product Bituminous Coal, Black Carbon, Petroleum Coke, Nickel Ore, Gold bullion , Gold Dust/Gold Bars, Tin, Silver, Gems, Cobalt, Coltan, Talc, iron ore, manganese ore, zinc ore, Milestone, Clinker ,Stone, Lithium ore , lithium carbonate Chemicals Product Sulphur, Magnesium Potassium chloride, Potassium hydroxide, Ammonium nitrate propane, butane, ethanol Calcium Hypochlorite 45kg/drm (India) Chlorine Tablet (50kg/drm) China Citric Acid (25kg/bag) China Boric Acid (25kg/bag) Russia/Europe Ferric Chloride (300kg/drm) India Nitric Acid 60% (35kg/drm) Europe Ammonium nitrate 6484-52-2 Magnesium Nitrate 13446-18-9 Magnesium acetate 16674-78-5 Magnesium citrate 144-23-0 Caustic soda,Calcium carbide, Sodium, hydrosulphide, sodium metabisulfite, xanthates, Ferrous sulphate, Monohydrate Fertilizer UREA, DAP, MOP, NPK, MAP,MKP, TSP Fertilizer products, Organic Fertilizer. Cocopeat Aluminum Steel, Copper Product Aluminum Ingot A7, Copper Cathode, zinc, lead , rubber, iron silicate, garnet sand, used rails Scarp HMS 1& 2 Animal Feed: Corn, Barley, Rice Burn, Wheat Burn, Alfalfa, Sunflower meal, Rapeseed meal, Soybean meal, if you need any help to source right product, the right price, right time send me your requirements. Have any opportunity or partnership for business Execute feel free to contract any time Expecting your soonest reply.
Application: Centrifugally cast stainless steel roll are of good heat, corrosion, wear resistant properties, working at high temperature environment on average: 800 to 1, 200¡ã c, which are used in the steel mills, like continuous annealing line, continuous galvanizing line. Process of centrifugally cast stainless steel roll: centrifugal casting for barrel/tube, forging for journal/shaft, static /investment or sand casting for cone/turnings, welding and machining and grinding. Material of centrifugally cast stainless steel roll: high nickel and high chrome heat resistant alloys, cobalt base alloys, like hu, ht, hk, hp, hw, 24/24nbtizr, 50cr/50ni (2.4813), 1.4865, 1.4849, 1.4848, 1.4410, 1.4059, 1.4841, 1.4845, 1.4852, 2.4879 or as per customer¡¡¥s requirements. Wooden package
PDC CUTTER The artificial PDC hole cutter, crafted from polycrystalline diamond integrated with a carbide matrix, combines diamond's inherent hardness and thermal conductivity with carbide's strength and resilience. Leveraging diverse tooth configurations and specialized post-processing techniques, it effectively reduces residual stress, ensuring a robust interface bond, yielding unparalleled thermal stability and impact toughness. Types Of PDC Cutter Standard PDC Cutter Diamond composite flat teeth primarily serve in the realms of oil and gas drilling, geological exploration, coal drilling, and stone processing as essential components of drilling and cutting tools. PDC dome/round inserts, tailored for exceptionally abrasive and hard formations, are predominantly employed as gauge inserts in DTH bits. Shaped PDC Cutter Benz teeth, ridge teeth are suitable for drilling soft to very hard formation, through hard interlayer and other complex formation drilling. What Are PDC Cutter Made Of? 01 Cutters Cutters are made from a carbide substrate and diamond grit. 02 High Heat High heat of around 2800 degrees and high pressure of approximately 1,000,000 psi forms the compact. 03 Cobalt Alloy A cobalt alloy is also present and acts as a catalyst to the sintering process. As a drill bit manufacturer, we will do our best to meet all the needs of customers. If you want to know more types of diamond pdc bit, please visit our website.
Iron Oxide Pigments For Ceramic Iron oxide red pigment is mainly introduced into ceramic pigment formula in the form of colorant. Such as brown series and black series in glaze pigment; zirconium iron oxide red pigment in zirconium series pigment; iron oxide red raw material is also widely used in black, coffee, brown series of billet pigment, as well as ceramic glazed tiles and other colorful cement bricks. Therefore, the dosage of iron oxide red pigment in ceramic pigment is very large, and the annual dosage is expected to be more than 10,000 tons. At present, the production methods of iron oxide red pigment used in ceramic pigment are mainly divided into sulfuric acid method and mixed acid method (nitric acid method). Take the thin iron plate as raw material, after processing, we get the red color bright iron oxide red pigment. Generally speaking, the comprehensive index of iron oxide red produced by nitric acid method is better than that of iron oxide red produced by sulfuric acid method. 1. What are the most common types of iron oxide red used in ceramics? Iron oxide red 110, iron oxide red 130, iron oxide red 190 are the most popular, and iron oxide red 180, iron oxide red 120, iron oxide red 160, iron oxide red 140, iron oxide red 101 are also widely used in ceramics. 2ã??How much iron oxide red is used in ceramics? The sales volume in China market is more than 10,000.00kg. 3ã??Which production process is better quality for iron oxide red applied in ceramics? Currently, there are two production processes for synthesizing iron oxide red, sulfuric acid method and mixed acid method, which is also known as nitric acid method. The later ceramic quality is better than the first. 4, iron oxide red coloring ceramics what colors? Iron oxide red used as a ceramic coloring agent, is the formation of ceramic glaze brown series, black series, cobalt iron series glaze, ceramic billet composition of black, coffee, dark brown and other colors of the pigment. The brown series occupies an important position in the ceramic industry. The crystal structure of the brown series is Fe-Cr-Zn-Al and Fe-Cr-Zn, Fe III is red, and the combination with chromium oxide green is golden yellow to black brown.
Contract length One Year Commodity Copper Cathodes Purity 9999 Cu Form Electrolytic Origin Republic of Zambia Quantity 61000MT Sixty One Thousand Metric Tons First shipment 1000 MT One Thousand Metric Tons Monthly shipment 5000 MT Five Thousand Metric Tons Price Less 12 Twelve Per cent LME Price of the day Loading Port Dar Es Salaam Port Tanzania or Durban Port South Africa Discharge Port xxx xxxxxxxx Incoterms Strictly CIF Cost Insurance and Freight Delivery term Strictly CIF Cost Insurance and Freight Payment Terms Secured by SBLC MT 760 Operative Irrevocable Non Transferable Unconditional Confirmable Standby Letter of Credit MT 760 as Payment Guarantee and finally by Telegraphic Wire Transfer MT 103 After Final Inspection of Quality and Quantity by SGSCICC report at final destination port until Five 5 banking days Note No advance payment will be required by Seller or his representative as long as the SBLC MT 760 is in place and is in active Seller shall use his own resources to ship the copper cathodes to Buyers destination Refinery 1SPECIFICATIONS NONLME Electrolytic Copper Cathodes Grade A Purity Cu 9999 Maximum 9997 Minimum conforming to the LONDON METAL EXCHANGE LME specification Cathode Grade Designation Cu Cath 1 CHEMICAL COMPOSITION ON DRY BASIS PERCENTAGE IN WEIGHT Cu 9996 9999 Rejection below 9996 Sulphur Sppm 4 Cobalt Coppm 02 Iron Feppm 2 Arsenic Asppm 01 Silver Agppm 10 Bismuth B1ppm 01 Lead Pbppm 02 Manganese Mnppm 01 Nickel Nippm 02 Tellurium Teppm 005 Selenium Seppm 03 Aluminium Alppm 05 Antimony Sbppm 01 Magnesium Mgppm 04 Silica Sippm 03 Zinc Znppm 04 2MEASUREMENT 914 mm x 914 mm x 12 mm LME Standards App 36 X36X05 Weight of each sheet 125 Kilograms Approximately 2 Net weight of each pallet 2000 Kilograms Approximately 2 Net weight per container 200 Metric Tons Approximately 2 Gross weight per container 222 Metric Tons Approximately 2 3 PACKING Palletised Aluminium banded Bundles of bare unsoiled nonoxidized Copper Cathode plates and banded by aluminium bands suitable for long distance transportation and well protected against scattering shock and rust Net weight of each bundle 25MT 1 No wooden packaging allowed 4PRICE AND PAYMENT GUARANTEE PROCEDURE Value of SBLC MT 760 shall be equivalent to one 1 month shipment value with a validity period of One Year and One Day Rolls and Extensions Both parties understand and agree that SBLC via MT 760 shall be issued only from one of the Top Prime Banks located in major cities of Middle east Western Europe Asia or US
TCI BIT The TCI drill bit has the characteristics of wide adaptability to the stratum and high mechanical drilling speed. As a TCI/MI tricone drill bit manufacturer, SML's products conform to the API standard and the drill bit type conforms to the international IADC (International Association of Drilling Contractors) specifications, the carbide inserts used in TCI drill bits are tungsten carbide (WC) and cobalt (Co) series carbide, which are mainly used in oilfield, gas field, mine, water well, geological exploration, geothermal development, hydrological exploration, engineering piling, etc. The TCI drill bit has the function of impacting, crushing, and shearing to break the rocks of the formation when rotating, so the TCI drill bit can be adapted to various formations of soft, medium, and hard. Different Types Of OEM/ODM TCI Drill Bit For Sale TCI Tricone Bit Double action of impact and shear for rock breaking, both impact of teeth and shear caused by sliding, high rock breaking efficiency. Features Of OEM/ODM TCI Drill Bits For Sale The TCI Drill Bits for sale adopts high-strength and high-toughness carbide teeth, and the optimized design of the number of tooth rows, the number of teeth, the exposed tooth height and the unique alloy tooth shape give full play to the high wear resistance and excellent cutting ability of the insert drill. The shape of the TCI Drill Bits teeth is designed according to the formation conditions. In general,the sharp and long teeth are suitable for soft formations, and the short and blunt teeth are suitable for hard formations.