Tci Bit

1.Tighten the bits when screw on. 2.When the bit lower down to the bottom , Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling. 3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay. 4.When drill jammed, withdraw first, should not to force the rig start. 5.Drill could not without water, to ensure that the bit will be too hot. 6.Use the bits in right order , big size first, then small one . 30*35*40cm 45kg

Advantage: 1 TCI tricone bit, steel teeth tricone bit,rock bit,milled tooth bit,tci bit,steel tooth bit 2 Certified by ISO9001&API 3 Wide size code 4 Best price 5 Delivery on time 6 High quality and competitive price 7 rubber seal or metal seal 8 including drill rods,drill collar,rerun steel tooth bits, ,used drill bits stock,used mud pumps,etc 9 be used for water well, oil field, underground, construction, geothermal, directional boring 114-117, 127 Soft Formation Tooth Bits The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth. 127 Medium-Hard Formation Tooth Bits The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear. 437 Soft Formation TCI Tricone Bits The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 517 Medium Formation TCI Tricone Bits The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability. 637 Hard Formation TCI Tricone Bits The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life. 617 Medium-Hard Formation TCI Tricone Bits The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.

Advantage: 1 TCI tricone bit, steel teeth tricone bit,rock bit,milled tooth bit,tci bit,steel tooth bit 2 Certified by ISO9001&API 3 Wide size code 4 Best price 5 Delivery on time 6 High quality and competitive price 7 rubber seal or metal seal 8 including drill rods,drill collar,rerun steel tooth bits, ,used drill bits stock,used mud pumps,etc 9 be used for water well, oil field, underground, construction, geothermal, directional boring 114-117, 127 Soft Formation Tooth Bits The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth. 127 Medium-Hard Formation Tooth Bits The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear. 437 Soft Formation TCI Tricone Bits The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 517 Medium Formation TCI Tricone Bits The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability. 637 Hard Formation TCI Tricone Bits The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life. 617 Medium-Hard Formation TCI Tricone Bits The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.

Brief introduction Size 12 1/4'' (311.1mm) Iadc 517 Bearing type Sealed bearing Thread connection 6 5/8 reg pin Wob(kn/mm) 0.35~1.05 Rpm(r/min) 120~50 Make up toqure(kn.M) 46.1~54.2 Weight(kgs/pc) 278 Color Customized Packing Plywood box(free-fumigation) Industrial standard Sy/t5164 Moq 1 pc Payment terms T/t, western union, and l/c are acceptable Applications Soft with low compressive strength and high drillability, such as shale, clay, sandstone and soft limestone, etc. Note:other size and iadc is avaiable

TCI tricone rock bits: 1)Certified by ISO9001&API 2))Used for water well, oil field 3)IADC:114-117,127,437,517,617,637.

TCI 437 Soft formation TCI Tricone bits The 437 tci bits are used to drill low compressive strength very soft formation tci bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design combined with maximum cone offset ,results in high bit penetration rates.the deep intermesh of cutter rows prevents bit bailing in sticky formations. TCI 517 medium formation TCI Tricone bits The 517 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows this design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations the HSN rubber o-ring provides adequate sealing for bearing durability. TCI 617 TCI tricone bits 617 features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows .this design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations . the HSN rubber o-rin provides adequate sealing for bearing durability . TCI 637 can be used to drill hard and abrasive formations wear –resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.

Tricone Bit, Steel Tooth Bit, TCI tricone Bit, Single Cone Bit, Rock drill Bits,Rotary Bits. Application Petroleum & Gas ,Water well ,Mining and Tectonic Industries ,Oil field, Construction, Geothermal, Directional Boring, and Underground Foundation work. 1) Condition: 100% new 2) Manufacturer brand name: GREAT 3) The bit size: 2 7/8" - 36" 4) IADC code: 111,115,117,127,137,217,417,517,537,617,637 etc. 5) Seal type: Rubber Sealed Bearing ,Metal Sealed Bearing. 6) Bearing type: Sealed Journal bearing ,Roller Bearing ,Air Bearing. 7) Nozzle quantity and nozzle size: 3 nozzles. 8) Connection joint Pin size: API 2-3/8"-7 5/8" Reg.

Model Number:417,517,617 ,437,537,637,117,217 Type: rock bit cutter Material:Tungsten Carbide Use: Well Drilling Formation:soft to hard formation Usage:Produce /replace hole opener cutters Bearing type: journal bearing Sealed type:metal sealing /Rubber seal Teeth type: insert button or milled tooth,saw tooth Name:Tci rock bit cutter

Product description: 12 1/4" TCI bit Size: 12 1/4" IADC code:517 Sealed Type: Rubber sealed Thread:6 5/8"reg pin WOB(KN/mm):0.7~1.20 RPM(r/min):70~40 Make up toqure(KN.M):16.300~21.700 Weight(kgs/pc):105 Color:Blue, red, green or Customized Packing:Plywood box(free-fumigation) Industrial standard:SY/T5164 MOQ:1 PC Payment terms: T/T,Western Union,and L/C are acceptable Applications:Soft with low compressive strength and high drillability, such as shale, clay, sandstone and soft limestone, etc. Note:other size and IADC is available