Stainless steel Valve Seats
Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve.
PRODUCT PARAMETERS
Tungsten carbide is one of the most important raw materials for cemented carbide. It's a black hexagonal crystal with metallic luster, chemical stability, hardness and diamond similarity, and it's also a good conductor of electricity and heat. In tungsten carbide, carbon atoms are intercalated into the gap of the tungsten metal lattice without destroying the crystal lattice of the original metal, thereby forming a gap solid solution, and thus the tungsten carbide is also called an interstitial compound (or an intercalation compound). Tungsten carbide is suitable for machining at high temperatures-- it can make cutting tools, structural materials for kiln, jet engines, gas turbines, nozzles, etc.
The hardness of cobalt-based carbonized tungsten alloy powder or nickel-based carbonized tungsten alloy powder and chromium-based carbonized tungsten alloy powder sprayed by HVOF tungsten carbide coating can reach 850 degrees of high temperature of HV1200. Therefore, the valve parts are resistant to abrasive, corrosion, high temperature and oxidation. The process exceeds the processes of manual surfacing, chrome plating, carburizing, quenching and tempering, etc., so that the production efficiency can be increased by more than 2 times, the production cost can be reduced by more than 50%, and the service life can be extended by several tens of times.
safety relief valve DN 20 valve body bronze valve seat and spring brass operating temperature -200 ------+250
Ball Valves Screwed / Socket Weld / Butt-weld / Flanged Ends : Ball valves are designed and manufactured to provide maximum service life and dependability. Three Piece and Two Piece design Ball Valves ensure efficiency, reliability and economy. Pneumatic Operated Ball Valves and Electrical Actuated Ball Valves are maintenance friendly and suitable for on-line maintenance . Butterfly Valves High Performance Butterfly Valve 150LB/300LB/600LB ,wafer type with integrally moulded elastomeric body sleeve are designed for longer life and trouble free performance. Gate Valves ATSIPL distributes a full line of Gate Valves, including Wedge Gate Valves, Knife Gate Valves, Lined Gate Valves, Resilient Seated Gate Valves and more. Gate Valves are available from 1/2â?³ through 24â?³ and larger in various material options.
Rigid Hull Fiberglass Inflatable Boat RIB boat, Fiberglass hull with inflatable tube boat, RIBs 580 Model: RIB580 Full length: 580cm/19ft Full width 245cm Tube Dia: 53cm Hull weight: 422kgs Max person: 12 persons Gross Weight:520kg Recommend HP: 60 to 90 HP Packing size: 560*210*115 cm Materials, 0.9mm or 1.2mm pvc materials or hypalon materials boat Standard accessories: Repair kit(materials,spanner,air valve,manual,glue) Extra accessories: 5 sets life jacket inside aluminum fuel tank Anchor and rope FRP anchor holder Bilge pump 60 A Battery with box Cream color cushion Console(Alu wind screen,Six wire switch,oil gauge) Seat box Steering system Stainless or FRP A Bar with lighter Trailer Hydraulic steering system Stainless Canopy/ T-TOP Canopy Stainless C type ladder FRP Step Butffly type Anchor holder Stainless rail duct New type of square anchor Pull stick Teak floor
Rigid-inflatable boat (RIB) is made by fiberglass hull and inflatable tube, it is a lightweight but high-performance and high-capacity boat constructed with a solid, shaped V hull . The design is stable and seaworthy. which can be used for a variety of applications including rescue, interception, patrolling,pleasure,leisure and as tenders for larger ships. Model: RIB580 Full length: 580cm/19ft Full� width� 245cm Tube Dia: 53cm Hull weight: 422kgs Max person: 12 persons Gross Weight:520kg Recommend HP:� 60 to 90� HP Packing size: 560*210*115 cm Materials, 0.9mm or 1.2mm pvc materials or Hypalon materials boat Standard accessories: Repair kit(materials,spanner,air valve,manual,glue) Original manufactuer eastsportboat from China. Do not support transport by air. only can send by sea from China Equipment Extra accessories for extra pay: 5 sets life jacket inside fuel tank Anchor and rope FRP anchor holder Bilge pump 60 A Battery with box Cream color cushion Console(Alu wind screen,Six wire switch,oil gauge) Seat box Steering system Stainless or FRP A Bar with lighter Trailer Hydraulic steering system Stainless Canopy/ T-TOP Canopy Stainless C type ladder FRP Step Butffly type Anchor holder Stainless rail duct New type of square anchor Pull stick Teak floor
19ft Rigid hull inflatable RIB boat fiberglass fishing boat RHIB boats rigid-inflatable boat (RIB) is made by fiberglass hull and inflatable tube, it is a lightweight but high-performance and high-capacity boat constructed with a solid, shaped V hull . The design is stable and seaworthy. which can be used for a variety of applications including rescue, interception, patrolling,pleasure,leisure and as tenders for larger ships. Rigid Hull Fiberglass Inflatable Boat RIB boat, Fiberglass hull with inflatable tube boat, RIBs 580 Model: RIB580 Full length: 580cm/19ft Full width 245cm Tube Dia: 53cm Hull weight: 422kgs Max person: 12 persons Gross Weight:520kg Recommend HP: 60 to 90 HP Packing size: 560*210*115 cm Materials, 0.9mm or 1.2mm pvc materials or hypalon materials boat Standard accessories: Repair kit(materials,spanner,air valve,manual,glue) Extra accessories: 5 sets life jacket inside aluminum fuel tank Anchor and rope FRP anchor holder Bilge pump 60 A Battery with box Cream color cushion Console(Alu wind screen,Six wire switch,oil gauge) Seat box Steering system Stainless or FRP A Bar with lighter Trailer Hydraulic steering system Stainless Canopy/ T-TOP Canopy Stainless C type ladder FRP Step Butffly type Anchor holder Stainless rail duct New type of square anchor Pull stick Teak floor
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
1. We have powder-mixing line, mold forming, injection, CNC machining, HIP sintering, vacuum welding, CNC grinding, EDM and so o 2.100% virgin material 3. Discount price for large quantity 4. Fast delivery time and suitable transportation solution 5. Dust-free workshop enhanced high quality of tungsten carbide products by Uniform density and pure material. Caride shim Feature Grade: YG6/YG6X/YG8/YG15/YG15C/YG11C/YG20/YG20C/YG25C optional Size: customized 1. Good toughn
Materials:SUS410,SUS420J2 We have a wide range of products and models for your selection. All products are produced under strict quality control, and development ensures that you are getting the latest products with the most advanced and cost effective technologies.
