Alkali-resistant Fiberglass Mesh is mainly used for EPS board(exterior insulation system of external walls),this products uses the machine-woven material of moderate-alkali or non alkali as material and treats with alkali-resistant coating. The strength and alkali-resistance of the products are very good,and it plays an important role in insulation system,it is mainly used to prevent crack.Because of its good resistance of chemical corrosion such as acid-resistant ans alkali-resistant and high strength of longitude and latitude,it can distribute the stress on the insulation system of external walls,avoid deformation of the insulation system caused by external impact and pressure ,and improve the impact-resistance of the insulation. Besides,ití»s easy to install and quality control,it acts as the "soft steel barin " the insulation system. Ordinary Specification : 1.Mesh Size:4mm*4mm,5mm*5mm; 2.Weight/m2:65g-300g; 3.Length/roll:50m,100m; 4.Width:1m,2m; 5.Color:White(standard,blue,green, or other colors; 6.Packing:Each roll packed into shrink-wrapping plastic bag,then put into carton. 7.Special specification and package can be ordered and produced according to customers requirement. Shrink film packing,then in carton.
Based on fiberglass yarn, coating PVC which meet European Unions requirement of Environment protection on each filament of yarn. Diameter: 0.28mm, 0.33mm, 0.35mm Weight: 2.5kg/bobbin If you have special requirement, we can also process it. Color: White, black, green, yellow, gray, greyish white (warp: Gray and weft: White).
CYC Fiberglass Direct Roving (ECY150D) for FRP Pultrusion CYC Fiberglass Roving for FRP Pultrusion is finished with high performance silane sizing and compatible with unsaturated polyester(UP), polyurethane, vinyl ester (VE), epoxy (EP) and phenolic resin matrixes. It is designed for weaving, filament winding, pultrusion, extrusion and hand lay-up processes. The typical end-finished products are including various FRP/GRP pipes, pressure vessels, gratings, chemical storage tanks, automobile parts, cable trays and so on. Glass Type: E-CR Glass Filament Diameter: 13, 15, 17, 24, 31�¼m Linear Density: 300, 600, 900, 1200, 2400, 4800, 9600tex Product Features: Good strand integrity and even tension Fast and complete wet-out in resins. Inner side unwinding smoothly & no fuzz Excellent tensile strength and mechanical properties TYPICAL PRODUCT SPECIFICATIONS Product Code Filament Diameter (m) Linear Density (tex) Tensile Strength (N/tex) Moisture Content (%) Loss On Ignition (%) Compatible Resin ECY150D-300 13 300 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-600 15 600 0.40 0.10 0.5 0.15 UP/VE/PF/EP ECY150D-900 17 900 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-1200 17 1200 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-2400 24 2400 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-4800 24 4800 0.40 0.10 0.55±0.15 UP/VE/PF/EP
The fiberglass window screen is produced with the fiberglass yarn through coating processing and then woven by a method of the plain weave in the production line. The finished screen features good performance for air ventilation and solar shade. As well, it possesses many advantages in terms of anti-corrosion and heat insulation, being easy to clean without deformation, long service life as well as fine and smooth feeling in the hand. It has been widely used in various facilities in ventilation, insects, mosquitoes and flies control.
300g fiberglass mat/ chopped strand mat/ csm/ sheet/ felt 1.Introduction E-glass chopped strand mat is made of randomly distributed chopped strands held tighter by a emulsion/ powder binder. It is compatible with unsaturated polyester, vinylit, epoxy resins. The roll width ranges from 50mm to 2080mm. Special requirements may be available upon request. 2.Usage It is used for processing and manufacturing frp products with getting through hand lay up process, filament winding process and press molding. Typical products is including bathroom accessories, pipe, building material, automobile, furniture, vessel, cooling towers and other frp products 3.Packing Product is manufactured in form of a roll wound on a paper tube and then packed in a plastic film and placed within a cardboard carton. Rolls can be loaded into a container directly or on pallets. 4.Parameter Density(g/m2Moisture content (%Loss on ignition (%Binder typeWidth (mm) 2250.22.1-6.3Powder/ emulsion1040 1270 2080 2500.22.1-6.3Powder/ emulsion1040 1270 2080 3000.22.1-6.3Powder/ emulsion1040 1270 2080 4500.22.1-6.3Powder/ emulsion1040 1270 2080 6000.22.1-6.3Powder/ emulsion1040 1270 2080
1. Mesh size: 9*9 mesh/inch(2.85*2.85mm), 8*8mesh/inch(3.2*3.2mm), 10*10mesh/inch(2.5*2.5mm), and other size as you require 2. Weight in each sqm: 50g/m2, 60g/m2, 65g/m2, 70g/m2, 75g/m2, 80g/m2 3. Length in roll: 10m, 20m, 45, 70, 90, 150, 153ect 4. Width inch roll: 35, 45, 50, 75, mm or other as clients' requirement 5. Color: white, yellow, and green ect 6. Package: shrink in each roll, 24-72 rolls in one carton or as your require. Package: shrink in each roll, 24-72 rolls in one carton or as your require.
1. Aluminium foil coated fiberglass cloth is made of continuous c glass or e glass filament texturized yarns. 2. Aluminium foil coated fiberglass cloth demonstrate a better insulating properties and greater fullness. 3. Aluminium foil coated fiberglass cloth insulating properties depend upon conductivity and radiation and these are influenced by the fabric construction. 4. Aluminium foil coated fiberglass cloth is the ideal substitute of the asbestos cloth. 5. Aluminium foil coated fiberglass cloth can re Weight: 50/30kgs/roll width: 1m-1.5m
k onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Fiberglass push pull, tracing duct rods, duct rodder--bazhou deli power tools Box
5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Fiberglass push pull, tracing duct rods, duct rodder--bazhou deli power tools Box
High silica fiberglass chopped strand is a kind of inorganic fiber, which is drew and winded from glass marbles through a system of na2o-b2o3-sio2. High silica chopped strand with low thermal conductivity and high temperature resistance is a kind of excellent high temperature insulator. 5. Off-gas filter, dust collection 6. Exhaut pipe silencer, noise reduction 7. Thermal insulation of spacecrafts, etc. Properties High silica chopped strand is excellent in high temperature resistance. 1) high temperature resistance, ablation resistance, heat resistance 2) low thermal shrinkage, low thermal conductivity 3) high electrical insulation 4) after two hours ablation in 1000¡ãc, the strands perform well 5) non-toxic, asbestos-free, environmental friendly. Specification High silica chopped strand is a kind of roving with staple length.
Characteristic of products: composite by styrene-acrylic emulsion, the products has generous texture, firmly node, suitabale flexibility as well as acid alkali resistant and anti aging. 4*4, 100g/m2, shrink wrapping bag packing, then in carton.
Fiberglass self-adhesive mesh tape is made by cutting high-quality fiberglass fabric coated with cyclic acid copolymer. Because fiberglass has a stable chemical property and isní»t liable to oxidate, the fiberglass self-adhesive tape developed and manufactured by our company not only has unexampled superiority than other similar products, it has some other features as follows: 1. Good alkali-resistance 2. High tensile strength and resistance to deformation 3. Excellent self-adhesiveness 4. Good smoothness 5. Convenient application in construction Ordinary Specification: 1. Mesh: 2.8mm*2.8mm, 3mm*3mm 2. Weight/m2: 65g-73g 3. Length/roll: 50m, 90m, 135m 4. Width: 5cm, 8cm, 10cm 5. Color: White (standard), blue, green or other colors 6. Packing: Each roll packed into shrink-wrapping plastic bag, 20 or 40 rolls per one carton. 7. Special specification and package can be ordered and produced according to customers requirement. We promise the best quality, the best service and competitive price. My EMAIL is export (at) xdfiberglass (dot) com, we look forward to your inquiry.
The ZrO2 alkali-proof fiberglass mesh uses the machine-woven fiberglass material of ZrO2-containing as material, and is immersed and coated by macromolecular alkali-resistant emulsion. The fiberglass mesh has good alkali-resistance and flexility, and its strength of longitude and latitude conform to national JG158-2004 standard, so it is widely used for exterior insulation system, water-proof and splitting-proof of external walls of building. Ordinary Specification: 1. Mesh size: 4mm*4mm 2. Weight/m2:165g 3. Length/roll: 50m, 100m 4. Width: 1m, 2m 5. Color: White (standard), blue, green or other colors 6. Packing: Each roll packed into shrink-wrapping plastic bag, four rolls per one carton. 7. Special specification and package can be ordered and produced according to customers requirement. We promise the best quality, the best service and competitive price. My EMAIL is export (at) xdfiberglass (dot) com, we look forward to your inquiry.
Various specifications and differet color such as 145g/m2, 5*5mm, in white, 1*50m/roll, 30rolls in a carton, 104, 000m2 in a container A 40 feet high container including 60 cartons and 70 small cardboard boxes, 104, 000m2
They are made of yarn or roving by means of leno or plain weave.The diameter of elementary glass fibres varies between 9 and 17micron. Mesh fabrics combined with specially designed mesh surface treatments can be used in a wide range of applications, but are mainly used in construction industry. Surface treatments based on styrene-butadiene ensure alkali resistance and increase the mechanical durability that is required by the construction industry. In addition, other surface treatments based on pvac , pvc or styrene-acrylate are used for different. Name of application Used type of mesh fabrics Finishing components manufacturing Al60 al76 al100 al120al145al159al160 External and internal plaster reinforcement Al60 al65 al100al110al120al130al159al160 al343 al540 Style of reinforced lightweight construction boards Al90 al100 Marble slab reinforcement Al63 al70 al80(with a105 treatment) Mosaic carrier Al130 al145 al159 al160al201 Electrical heating mats Al90al130 Floor reinforcement Al110 al120 al130 al138 al217 Asphalt and other insulator reinforcement Al60 al70 al110ap60 ap70 ap82 Applications: Example of marking Example:al68 a101 Al68 type of fabrics (al-mesh)with finished fabrics weight in g/m2(68g/m2), af¼alkali resitance, lf¼leno, (pf¼plain). A 101-alkali resistant surface treatment A 105-surface treatment with soft or hard resin Lits of applications by types of mesh fabrics.
It is made of high strength C glass fiberglass yarn. It is divided into plain weave, twill weave or stain weave. It has good insulation, heat resistance, good corrosion resistance and tensile strength. It can be compatible with polyester, epoxy and vinyles ter resins, and is widely used in mica tape,fiberglasstape,aircraft industry, ship industry, chemical industry, military industry and sports goods, etc.
Its working temperature is -60~200,It is braided by non-alkali fiberglass,then coated with silicone resin and treated in high temperature.Its average is 1.2KV,1.5KV,2.5KV,4KV,7KV. Flammability:self-exstinguish,wear resistant,tear resistant,good compatibility with same class impregnation varnishs,good mechanical resistant,very flexible. We got UL,REACH,ROHS,SGS,ISO9001:2015,TS16949 and so on certifications.
It is braided by non-alkali fiberglass, then coated with silicone resin and treated in high temperature Flammability: self-extinguishing, wear resistance, tear resistance, good compatibility with same class impregnation varnishes, good mechanical resistance, very flexible Internal wiring of electronics, electrical appliances and automotive, classes H and C motors, transformers, generators, heating apparatus, lighting, control, inverter, etc.
Self-adhesive tapes are used for increasing joint strength and for quick and easy drywall and repair solutions.
Fiberglass Insect Screening mosquito nets for windows screens/Fiberglass Insect Screen 1.Size:18*16 18*14 16*16 16*14 2.Width:60~280cm 3.Weaving:plain weaving 4.Main color:Grey,Black
