DPG (D) GRANULE AND POWDER CHINA , Technical Name: Diphenyl guanidine Appearance: White or grayish white powder or granule, Melting point:144.0 Generally used for natural and synthetic rubbers. Mainly used in manufacture of tires, slab rubber, rubber shoes and other technical rubber products.
CPE/CR Rubber Vulcanizer H631 Colour: Light yellow powder Cross-linking Agent ACTORH-631 H631 can be used as a thiadiazole vulcanization system for vulcanization crosslinking of chlorinated polyethylene rubber (CPE/CM) and chloroprene rubber (CR). As a CM/CR high-efficiency vulcanizing agent, it can produce heat-resistant, ozone-ageing, flame-retardant and excellent physical properties. It is widely used in rubber products such as cables, hoses, tapes and so on. H631 is obtained by complex condensation coupling reaction of thiadiazole derivatives and other macromolecule amides. Its appearance is a pale yellow powder. The product can be used in various vulcanization processes of CPE/CR, such as moulding, continuous vulcanization, pot-type, microwave-type, etc. H631 can effectively vulcanize chlorinated polyethylene rubber (CM), chloroprene rubber (CR) and obtain excellent vulcanizates. Characteristic 1. H631 is suitable for low pressure die-less vulcanization (conventional peroxide system requires higher vulcanization temperature and pressure), with good processing safety and longer scorching time. 2. H631 can replace high-priced plasticizers such as DOP with cheap plasticizers such as aromatic oils. 3. H631 is an effective co-vulcanizing crosslinking agent for rubber such as CPE/EPDM CPE/NR CPE/CR.
Chemical Name: Zinc 2-mercaptobenzothiazole Specification: Item MZ-5 MZ-15 Powder Oiled powder Powder Oiled powder Appearance Light yellow powder Light yellow powder Initial M.P. �¿C â?¥ 200.0 200.0 200.0 200.0 Loss on drying % â?¤ 0.30 0.50 0.30 0.50 Zinc content % 16.0-22.0 16.0-22.0 15.0-18.0 15.0-18.0 Free M % â?¤ 5.0 5.0 15.0 15.0 Residues on 150�¼m sieve, % â?¤ 0.10 0.10 0.10 0.10 Additive, % -- 1.0-2.0 -- 1.0-2.0 Properties: Light yellow powder with light bitter taste. Specific density is 1.65--1.72. Hardly soluble in acetone, benzene, ethanol, and carbon tetrachloride. Insoluble in water, gasoline. Decomposed in strong acid and alkali. Application: Used for NR, IR, SBR, NBR, EPDM and latex. May be regarded as an intermediate between Accelerator MBT and Accelerator MBTS. Used as a secondary accelerator in combination with Accelerator ZDMC and Accelerator ZDEC. Have the similar performance as MBT at curing temperature in dry rubber application. Has lower scorch and better has processing safety. Suitable for mold curing. Requires zinc oxide and stearic acid as activators in many kinds of rubber batch. Easily disperses in rubber; yields non-staining and non-discoloring products. Mainly used in the manufacture of latex products, foam rubber, latex coating gloves, etc. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Chemical Name: Dibenzothiazole disulfide Specification: Item Powder Oiled powder Granule Appearance Gray-white or light yellow powder(granule) Initial M.P. �¿C â?¥ 167.0 167.0 167.0 Loss on drying % â?¤ 0.30 0.50 0.30 Ash % â?¤ 0.30 0.30 0.30 Residues on 150�¼m sieve, % â?¤ 0.10 0.50 -- Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 1.50 Properties: A little bitter taste. Specific gravity: 1.45--1.54. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than Accelerator MBT. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Chemical Name: N-Oxydienthylene-2-benzothiazole sulfenamide Specification: Item Granule Appearance Light yellow or orange granule Initial M.P. �¿C â?¥ 80.0 Loss on drying % â?¤ 0.30 Ash % â?¤ 0.30 Insoluble In methanol,%max 0.50 Free amine,%max 0.50 Properties: Light yellow or orange crystal(granule). No posion with a little odor of ammoni. The density is 1.34--1.40. Soluble in benzene, acetone, chloroform, insoluble in water acid and alkali with lower concentration. Application: An excellent delayed accelerator. The performance is similar as Accelerator CZ with better scorch safety. Widely used in NR, IR, SBR, NBR and EPDM. Can be used alone or with those vulcanization Accelerators such as thiurams, guanidines and dithiocarbamates to improve the activity. Mainly used in manufacture of tires, shoes and belts. Non-blooming. Not Suitahle appying in beverage and food containers because of the bitterness of the product after vulcanization. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is one year when stored under normal conditions.
Chemical Name: N-tert-butyl-2-benzothiazyl sulfenamide Specification: Item Powder Oiled powder Granule Appearance Gray-white powder(granule) Initial M.P. 105.0 105.0 105.0 Loss on drying % 0.30 0.50 0.30 Ash % 0.30 0.30 0.30 Residues on 150 m sieve, % 0.10 0.10 -- Insoluble In methanol,% 1.0 1.0 1.0 Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 1.0-3.0 Properties: Grey white powder(granule in color with bitter taste and slight odor. Specific gravity: 1.26--1.32, Soluble in ethanol, carbon tetrachloride, acetone, benzene, carbon disulfate, chloroform; Hardly soluble in gasoline and insoluble in water. It is not hygroscopic. Application: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra Accelerators in tire compounds or industrial rubber products. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 1 year when stored under normal conditions.
Rubber Adhesive GLR-806 / Rubber Adhesive CYREZ 964 / Rubber Adhesive HMMM / Rubber Adhesive RA-65 / Rubber Adhesive HMMM-65% Overview: 1. Chemical name: Hexamethoxymethylmelamine (HMMM) 65% + inert carrier (white carbon black) 35%. 2. Chemical family: Methylated melamine-formaldehyde resin, melamine resin 3. CAS No.: 9011-5-6 Technical Specifications: Appearance: White powder Ash content (850deg): 29~35 Water content % max.: 4.5 Sieve residue (325 mesh) % max.: 0.3 Free formaldehyde content % max.: 0.1 Application: 1. It can promote adhesive force for rubber and steel cord or fabric cord. 2. Suggested ratio: 2-5 poses Rubber adhesive RA-65 with 2-5 poses resorcinol formaldehyde resin. Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Shelf life is one year.
Rubber Antioxidant IPPD (4010NA) Another Name: 4010NA Molecular Formula: C15H18N2 CAS: 101-72-4 Technical Specifications: Appearance: Grey purple to puce granules or flakes Melting point min.: 71.0 deg. Heating Loss % max.: 0.5 Ash Content % max.: 0.3 Purity % min.: 96 Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Stored in dry, clean and cool warehouse, Shelf life is one year.
Rubber Antioxidant TMQ / Rubber Antioxidant RD Chemical Name: Polymerized 2, 2, 4-trimethyl-1, 2-dihydroquinoline Another Name: RD CAS NO.: 26780-96-1 Technical Specifications: Appearance: Brown granules Softening point, deg.: 80-100 Heating Loss % max.: 0.30 Ash Content % max.: 0.30 Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Stored in dry, clean and cool warehouse, Shelf life is one year.
Rubber Antioxidant 6PPD (4020) Chemical Name: N-(1, 3-DIMETHYLBUTYL)-N- PHENYL-P-PHENYLENEDIAMINE Another Name: 4020 Molecular Formula: C18H24N2 CAS NO.: 793-24-8 Technical Specifications: Appearance: Purple brown to dark brown granules or flakes Melting point min.: 46.0 deg. Heating Loss % max.: 0.3 Ash Content % max.: 0.1 Purity % min.: 96 Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Stored in dry, clean and cool warehouse, Shelf life is one year.
Rubber Antioxidant DTPD / Rubber Antioxidant 3100 / Wingstay 100 Overview: Chemical Name: N, N-Bis (methyl phenyl)-1, 4-benzenediamine. Another Name: 3100, Nailax CAS No.: 68953-84-4 Technical Specifications: Appearance: Brownish grey granules Initial melting point (dry) deg: 90-100 Heating loss (65deg, 3h) %max.: 0.50 Ash content (800�±25deg) %max.: 0.30 Active compenents content %min.: 80.0 Diphenylamine %max.: 6.0 Fineness through 3/8 %min.: 100.0 Iron content ppm/max.:750.0 DPPD content %: 16.0-24.0 DTPD content %: 15.0-23.0 PTPD content %: 40.0-48.0 Application: 1. It can be used for manufacturing tires. 2. It is suitable for load tires, cross-country tires and various tires and bias-ply tires. Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Stored in dry, clean and cool warehouse; dampness and heating are strictly prohibited. 3. Shelf life is one year.
Rubber Processing Oil Rubber Process Oils are used during mixing of rubber compounds. These help in improving the dispersion of fillers and flow characteristics of the compound during further processing. Rubber processing oils are specially developed taking into consideration the type of rubber and the end product applications.
Material Properties Styrene butadiene Rubber latex is a kind of high-polymer dispersion emulsion polymerized by butadiene, and styrene, etc. through advanced techniques. As a white thick emulsion in appearance, it has good viscosity. It is one of the popular raw materials in tyre-dipping fabric industry, because of its good intermiscibility with VP latex for fabric dipping. Typical properties Product Styrene butadiene Rubber latex (SBR latex) Execution Standards: Q/320205 GLFF01-2010 Item Standard Solid Content, % 50.0±1 Viscosity, mP25-35 pH Value(25ºC) 10-11 Density,g/cm3(20ºC) 0.98-0.99 Mechanical Stability, %5 Chemical Stability, %0.33 Application It is suitable for the dipping of tyre cord fabric, and industrial fabric etc.. Storage&Package 1.Avoid from rain, snow or strong sunlight. Temperature: 1~40°C. 2.200L Drum, 1000L IBC. 3.Keep in dry, cool, non-aggressive gas warehouse, and avoid strong sunlight, remote from fire and thermal resource at 1~40°C, 6 months shelf life, a little decrease of PH value.
Panama Petrochem Ltd, manufactures Rubber Process Oils which are widely used across various industries and are popular as safe and environment friendly products. Different grades of superior quality Rubber Process Oils are offered which are used for the manufacturing of various rubber produces, from both natural as well as synthetic rubber. Under the brand name Panol, 3 Grades are offered namely, PANOL C 160-A – (Aromatic Base) PANOL C 160-P – (Paraffinic Base) PANOL C 160-N – (Naphthenic Base) Also, Speciality Rubber Process Oils meeting European Regulation for non-carcinogenic oils, Mild Extracted Solvent (MES), Residual Aromatic Extracted Solvent (RAE) and Treated Distillate Aromatic Extracted Solvent (TDAE), are offered on request. PANOL C 160-A Panol C 160-A is an Aromatic type of Rubber Processing Oil, formulated from specially selected aromatic furfural extracts with higher aromatic content. It is available with different viscosities as required for different applications. High rubber and polymer solvency Widely used in the manufacturing of automotive tyres and tubes, bi-cycle tyres, tyres retreading materials, belting, hoses, battery containers, extruded products and technical moulded goods Highly suitable for Natural Rubber, Styrene Butadiene Rubber, Polybutadiene Rubber and Neoprene Rubbers Offers good compatibly and is suitable for use with Natural Rubber, SBR, PBR, CR etc. PANOL C 160-P Panol C 160-P are Paraffinic type Rubber Processing / Extender Oils formulated from highly refined solvent extracted base stocks of low sulphur content. These oils are used in the manufacturing of butyl tubes and a variety of technical moulded and extruded products based on polar rubbers like EPM & EPDM etc. They have good thermal stability and are suitable in the manufacture of light coloured products and because of their high paraffinic content and viscosity, these oils are preferred for achieving high retention of properties after ageing and higher loading of oil They are used for heat resistant conveyor belts and steam hoses PANOL C 160-N Panol C 160-N serws grades are Napthenic type Rubber Processing / Extender Oils formulated from carefully selected Hydrotreated Napthenic base stocks. These are non-staining in nature and posses excellent thermal, oxidation and colour stability They are recommended in the manufacture of automotive tubes, light coloured non-back footwear products and also moulded and extruded goods They are compatible for processing with NR, SBR, PBR, Butyl and EPDM rubbers Special tailor-made blends are also available for TPR and other specific applications SPECIALITY RUBBER PROCESS OILS We manufacture and offer Speciality Rubber Process Oils meeting European Regulation for non carcinogenic oils. We have a wide range of Mild Extracted Solvent (MES), Residual Aromatic Extracted Solvent (RAE) and Treated Distillate Aromatic Extracted Solvent (TDAE).
Molecular Formula: C5H8 The goods is an important monomer of synthetic rubber, its dosage accounted for 95% of the total output of isoprene, mainly used for the synthesis of isoamyl rubber, its production after styrene-butadiene rubber and butadiene rubber and synthetic rubber in the third.Secondly, used as a monomer synthesis of butyl rubber, to improve the butyl rubber vulcanization performance, but very few dosage, isoprene is also used in synthetic resin, liquid polyisoprene rubber, etc.Also used in the manufacture of pesticide, medicine, spices, adhesives, etc.
Packaging and storage: paper plastic composite bags, pearlescent film or plastic woven bags, 25kg/ bags. Store in dry and ventilated places. For other types of vulcanization accelerators such as MBT (M), MBTS (TM), DCBS (BZ), TBBS (NS), etc., please send message to Email.
Characteristics and Usesï¼? Applicable to various lubricating oils, re-processed gasoline, paraffin and other mineral oils, as well as to polyethylene, polystyrene, polypropylene, ABS resin, polyester, cellulose resin and foamed plastic (particularly to white or light-colored product), food-grade plastics, natural rubber, synthetic rubber, animal and plant grease etc.
Non-polluting antioxidant TH1520 macromolecule material antioxidant Chinese Name: 2,4-bis (n-octylthiomethyl) -6-methylphenol English Name: 2,4-Bis (octylthiomethyl) -6-Methylphenol CAS No. 110553-27-0 Molecular formula: C25H44OS2 Molecular weight: 424.7 Physical property: Melting point: 20 C Appearance: White crystals or colorless to yellowish liquids Specific gravity: 0.975-0.979 (20 C) Viscosity: 80-90 mPa.s (20 C) Technical Indicators: Content (>98%) Transmittance: 425 nm 95% Antioxidant 1520 is a new high molecular weight liquid antioxidant, which has certain effect on the stability of rubber and adhesive compound. 1520, it can effectively prevent gel formation and prevent rubber color, molecular weight and viscosity changes during isolation, drying, storage and shipping. 1520 is effective even in rubber processing without the addition of phosphite (TNPP). But if necessary, adding phosphite will make the effect better. At the same time, 1520 can also be used in polymer or organic matrix, including thermoplastic elastomer, synthetic oil, etc. Purpose: This product is a rubber antioxidant. Mainly used in cis-butadiene rubber, styrene-butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomer and other synthetic rubber, its dosage is small, antioxidant effect is good, can improve the stability of plastics or synthetic plastics. It belongs to environmental protection antioxidant, and realizes the transformation of rubber products from general type to environmental protection type. This product can also be used in lubricants, plastics and other polymer polymers, with excellent oxidation resistance. Packing, storage, transportation and precautions: Galvanized drum packing, net weight 200 kg; The product should be stored in a clean and dry place to prevent rain. When handling this product, strong rubbing should be avoided.
Details of silicone rubber vulcanizer DPDH Chinese Name: 2,5-dimethyl-2,5-bis (tertbutyl peroxy) hexane; 2,5-dimethyl-2,5-bis (peroxide tertbutyl peroxide) hexane; 2,5-dimethyl-2,5-bisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbisbis (bis "2,5" vulcanizing agent; bis-2,5-hexane; 2,5-didimethyl-2,5-bis-2,5-bis (peroxytertbutyl) hexane (peroxy tertbutyl) hexane; 2,5-didididimethyl-2,5-dididididimethyl-2,5-bisbisbisbis (tertbutbutyl peroxy) hexahexa5-dimethyl-2,5 bis (tert) Butyl peroxide) hexane. English Name: 2,5-BIS (T-BUTYLPEROXY) - 2,5-DIMETHYLHEXANE; 2,5-BIS (TERT-BUTYLPEROXY) - 2,5-DIMETYLPEROXY) - 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DIMETHYL-2,5-BIS (TERT-BUTYLPEREROXY) HEXANE; 2,5-DIMETHYL-2,5-DIMETHYL-2,5-DI DIMETHYL-2,5-DI (T-BUTYLPEREROXY-BUTYL-DI DI DI (T-BUTYL-BUTYL-PEROXY) HEXANE; - BUTYLPEROXY) HEXANE Di-tert-butyl 1,1,4,4-tetramethyltetramethylene diperoxide; luperox; LUPEROX 101XL; Trigonox 101; VAROX DBPH; VAROX DBPH-50 Molecular formula: C16H34O4 Molecular weight: 290.4 CAS No. 78-63-7 Product Profile: Bis-pentadecyl sulfide can be used as crosslinking agent for natural or synthetic rubber, as well as for thermoplastic polyolefins. Compared with 3M and di-tert-base silicone rubber products, the silicone rubber products produced have higher operation safety, better heat resistance and physical properties. It has high content, low consumption and low cost. It can be used as crosslinking of natural or synthetic rubber as well as thermoplastic polyolefins. 1. Rubber with bis-pentadecane vulcanizer has excellent scorching safety. 2. Safe processing temperature: 135 C (rheometer tS2 > 20 minutes) 3. Typical crosslinking temperature: 175 C (rheometer T90 about 12 minutes) Use of bis-pentadecyl sulfide: Bis-pentadecane vulcanizer is a bifunctional peroxide, which can be used as crosslinking of natural or synthetic rubber, as well as thermoplastic polyolefins. Product Specification of Bi-pentadecane Sulfide: Appearance: White paste with high viscosity: 50 PT-Co Max Content: 92.0% min ROS: 10.14% min Organic peroxides are unstable to heat and can produce exothermic self-accelerated decomposition. Self-accelerated decomposition temperature SADT is the lowest temperature at which peroxide may produce self-accelerated decomposition in packaging for transportation. The determination of SADT is based on the "heat accumulation storage test". Bis-pentadecane vulcanizer packaging: standard packaging is 25kg/plastic bucket
Non-polluting antioxidant TH1520 macromolecule material antioxidant Chinese Name: 2,4-bis (n-octylthiomethyl) -6-methylphenol English Name: 2,4-Bis (octylthiomethyl) -6-Methylphenol CAS No. 110553-27-0 Molecular formula: C25H44OS2 Molecular weight: 424.7 Physical property: Melting point: 20 C Appearance: White crystals or colorless to yellowish liquids Specific gravity: 0.975-0.979 (20 C) Viscosity: 80-90 mPa.s (20 C) Technical Indicators: Content (>98%) Transmittance: 425 nm 95% Antioxidant 1520 is a new high molecular weight liquid antioxidant, which has certain effect on the stability of rubber and adhesive compound. 1520, it can effectively prevent gel formation and prevent rubber color, molecular weight and viscosity changes during isolation, drying, storage and shipping. 1520 is effective even in rubber processing without the addition of phosphite (TNPP). But if necessary, adding phosphite will make the effect better. At the same time, 1520 can also be used in polymer or organic matrix, including thermoplastic elastomer, synthetic oil, etc. Purpose: This product is a rubber antioxidant. Mainly used in cis-butadiene rubber, styrene-butadiene rubber, ethylene propylene rubber, nitrile rubber, thermoplastic elastomer and other synthetic rubber, its dosage is small, antioxidant effect is good, can improve the stability of plastics or synthetic plastics. It belongs to environmental protection antioxidant, and realizes the transformation of rubber products from general type to environmental protection type. This product can also be used in lubricants, plastics and other polymer polymers, with excellent oxidation resistance. Packing, storage, transportation and precautions: Galvanized drum packing, net weight 200 kg; The product should be stored in a clean and dry place to prevent rain. When handling this product, strong rubbing should be avoided.
