Chinese Distemper Paint Suppliers and Manufacturers

Hydroxyl Acrylic Resin SE6651 K SE 6651 K is an hydroxyl functional acrylic resin that, when combined with appropriate aliphatic polyisocyanates, provides excellent durability and outstanding gloss retention. It should be used in solid color paints and clearcoats for vehicle refinishing and in industrial topcoats. Se 6651K is used in combination with aliphatic isocyanates it exhibits good exterior durability, good build and gloss, high end hardness and good adhesion results on metallic base coats. 1. Features High gloss, good levelling property, high hardness, excellent chemical resistance and pigment dispersity 2. Applications PU top coat, automotive refinishing paint, colored paint 3. Properties Componen:Acrylic ester copolymer Appearance :Clear Fe-Co Color:ï¼?1 Viscosity Pa.s/25â??: 2-5 Non-volatile%:60�±2 Acid value mgKOH/g: 4-8 Solvent: XYL/S-100 Hydroxyl value:86 4. Compatibility and solubility XYL + BCS + TYL + CAC + BAC + CYC + Remark:+ show soluble in/compatible in 5. Reference formula Two component (brilliant black paint) Diluent (A component) SE6651K 70 XYL 40 BBG333 0.2 TOL 5 BBG306 0.3 BAC 25 BBG110 2.0 CAC 15 BAC 24.3 PMA 15 Carbon black 3.0 10% sn 0.2 (B component) Bayer N3390 A component: B component: diluent=100: 15: 80~100 6. Process conditions Baking condition: (1) 65 x 60min, place 24hours for test (2) Air drying Substrate: Sand plate tin 7. Test technical index Test Item Test Method Reference Standard Test Standard Test Result (reference value) Surface drying Blow cotton ball method ------ Not stick cotton ball 25min(2m) Hard drying Finger pressing method ------ No finger print 24h(25m) 8h hardness Pencil scratch GB/T6739-96 -----

we are leading professional supplier of automotive refinish products, such as *1k basecoat *2k topcoat *clearcoat *Hardener *Thinner *Putty & primer we are the professional supplier of automotive paint in China and overseas market, excellent services and high quality products will be provide to you. We have sold our products to wide area of the world, such as Africa, Latin America,etc, .look forwarding to hearing from you soon

Product formation: The composition of the matrix resin, catalyst, carbon forming agent and foaming agent This product is fireproof coating for steel , this paint is made of special resin , fire retardant materials , titanium dioxide and other materials. It can prevent the heat transfer of the flame, and make time for fire extinction so as to decrease hazard loss. Product features: Protecting the steel structure from deformation, beam bending , because it lost the carrying capacity over temperature of 450-650 . If no paint, it will damage and can not continue to use. Application: 1.Please do the necessary substrate treatment such as derusting , dedusting and degreasing, and then apply the anti-corrosive primer paint such as zinc rich primer paint or epoxy mio paint. 2.Make sure the paint is fully mixed before use. 3.Please do not use this product when moisture content rh>90 or t.

Description: This product is quick-dried acrylic aerosol paint, with convenient application, perfect atomization and high emission rate. Its paint film has high plumpness, good adhesion and rich colors. It is widely used for metal, wood materials and ABS plastic etc. Features: 1.Acrylic fast-dried spray paint. 2.Rich colors, perfect atomization. 3.Above 96% emission rate. 4.ISO9001, ISO14001, SGS, REACH certificates. Applications: The paints can provide films with excellent weather resistance, good leveling, strong coverage, and match well with many types of primers. They can be widely used for all interior/exterior applications, for surface finishing of mechanical equipments and plastics. The films should avoid contacting with gasoline or other organic solvents. 12pcs/ctn, 400ml/pc, 350ml/pc

Ature:remove all oil or grease, soluble contaminants and other foreign matter All surfaces to be coated should be clean, dry and free from contamination If applied on rusty surface, rusty layer thickness should be below 50mm, other than bottom surface processing requirements, without acid and sandblasting processing, catalytic reaction, to get black protective layer and solvent (acrylic acid, polyurethane, epoxy resin, alkyd resin, amino paint or water-based paint) match well, will not occur and paint color bleeding Apply in nice weather, don't let coating contact any liquid like water or other solvent before completely dry No painting be carried out in rainy day outdoor If above 85% humidity please stop painting Temperature of substrate should be above 5¡ãc Lower temperature might not dry or cause long time to dry •air spray:nozzle orifice range: 1.5 to 2.5mm Nozzle pressure range: 0.3 to 0.5mpa •airless spray:nozzle orifice range: 0.4 to 0.5mm Nozzle pressure range: 12 to 15mpa •features:brush: use soft brush Recommended finish: rsl series Storage temperature: 5 to 30¡ãc in well ventilated warehouse Stir thoroughly before painting Don't use any steel or other metal stick to stir paint 20l/barrel

Thermoplastic Road Marking Paint is a 100% solids material blend of binder, pigments, glass beads, peformance additives and other wear-resistant fillers. The binder is made from petroleum-derived resins, it is the best used for long-lifespan road marking applications. Intermixed and drop-on glass beads provide retroreflectivity for nighttime visibility of the road marking. Its composition specification and physical technical data conforms to BS3262-1:1989 Part 1 standard.

A:Technical Specifications Colour Blend grey Material Recycleled polyester felt paint materials Thickness Appr 1.5 mm Width 100 cm Roll length 50 M Weight 200 g/m2(+/5%) Contruction Fleece layer + non-slip PE foil backing layer H.S code: 5603949019 B: Feature of recycleled polyester felt paint materials (1)Absorbent non-woven fabric layer +Slip-resistant and impermeable coated bottom (2) Simple, clean and fast interpreted (3) Absorbent surface, impermeable underside of sheet (4) Anti-slip bottom for a secure grip (5) Reusable,damp-proof (6) Inside and outside use absorbent non-woven non slip mat C: Application of recycleled polyester felt paint materials Suitable for various areas of application in the craft and the construction: (1) Protects floors, carpet and furniture from paint spills, thinners, glue, etc, like a sponge. (2) Fixed stop on stairs and ladders. (3) Protection against liquids and mechanical damage.

Outline Dimension: 3600(L)*1200ï¼?Wï¼?*1600ï¼?Hï¼? Area for machine place at factory: 1.2x1.5+1.65m Diameter: from 20mm to 57mm Wound tube Length: 1.23m ~3.4m Finished Roller Cover Length: from 3" to 10" Power Supply: AC380V/220V,50/60HZ, 3phases Air supply: 0.6MP Speed: Up to 1000 pcs/H Operator: only 1 person Controller: touch screen 1> This paint roller finishing machine is one-off completion of Cutting, Combing, Beveling, Vacuum cleaning. 2> Manufacturing customized device according to different diameter and length 3> The paint roller finishing machine is PLC operated. 4> Fast changeovers between different inner diameter.