Iron scrap, stainless steel scrap.
Copper, steel plates, steel wire, copper scrap.Shipping and logistics
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Stainless Steel Scrap 304, Sponges, Garbage Bags.
Steel products.
Solar Mounting Structures.
Steel billet, hrc, slabs, etc anthracite coal..
«contrrust» is environmentally-friendly rust converter based on natural products and water . It converts rust into bluish-black, protective, natural polymer which stops further rusting and also can be used as primer. Ideal for iron or steel. Will not work on aluminum, copper, stainless steel, or galvanized metal. Key advantages: - “green” product, not toxic, not polluting - no mineral acids, no damage to surface - no need for additional surface preparation and after-treatment - work in hardly accessible places - no additional equipment is needed - life time of the steel is 6-12 times longer compared to using competitive remedies. Application areas Industrial fabrication Machinery & equipment manufacturing Building construction Ports & docks Shipping industry Automobile industry Locomotive and railways Installation of petroleum and petrochemical industries Oil & natural gas installations Spreading rate: 60-200 g/m2 (depending on thickness of rust layer) 5, 20, 50, 100 or 1000 liters container.
Slatwall panels and accesories, folding bars.
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
1) composite rebar (gfrp) d 4 32mm 2) composite mesh (gfrp) d 2 4mm (50*50, 100*100, 150*150 and 200*200) 3) glass fiber for concrete 4) gfrp bent elements.Wholesale trade, customs clearance, delivery services.
Pv Mounting Systems For Utility Scale Solar Power Plants, Metal Structures For Photovoltaic Power Plants .
Ferromanganese HC size: 10-80 mm Quality indexes: Mn 75-82%; C 7%; Si 1%; P 0.2%; S 0.02% Lumps use: Ferromanganese HC for the metallurgical and foundry industry. Ferromanganese HC its a manganese and iron alloy, which is widely used for deoxidation and alloying of steel in the metallurgical and foundry industries. Ferromanganese HC increases hardness of the steel, anti-corrosion properties and rupture resistance. Quantity available per month: 250t Packing: big bags
Silicomanganese (Simn65%) size: 10-80 mm Quality indexes: Si 17.2%; Mn 65.3%; C 2.4%; P 0.35%; S 0.02% Lumps use: Ferrosilicomanganese MnS17P35 for the metallurgical industry. Ferrosilicomanganese MnS17P35 is a brittle alloy of iron, silicon and manganese, which is widely used in the metallurgical industry to deoxidize steel. Ferrosilicomanganese gives the alloy shock resistance and brittleness in bending. Quantity available per month: 300t Packing: big bags
Ferrosilicon FS10 Lumps dimentions: 0-800 mm Quality indexes: Fe (75-88), Si (8-12.5), Al (0.5-2.0), C(0.4-2.0), Ti(0.3-3.5), S(0.08-0.25), Cu(0.03); Lumps use: Ferrosilicon FS10 for the foundry and engineering industry. Ferrosilicon FS10 is a ferroalloy, the main components of which are metals such as iron and silicon. Ferrosilicon is used as a deoxidizing and alloying additives for the smelting of electrotechnical, spring, corrosion and heat-resistant steels. Quantity available : 2500t Packing: big bags
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
