Size 120 x 120 x 38mm (4.71 x 4.71 x 1.50inch) Motor Shaded Pole Frame Aluminum Die-Cost Impeller PBT + 30% Fiber Glass. UL94V-0 Lead Wire 1007# 22AWG. UL/CSA Insulation Resistance Min 10 M 0hm at 500VDC Between Terminal and the Frame Dielectric Strength 1 min at 1,500VAC 50/60Hz Bearing Type B: 2 Ball Bearing. S: Sleeve Bearing Operating Temp Ball Bearing: Within -20 ~ 80°C Sleeve Bearing: Within -10 ~ 56°C Life Expectancy Ball Bearing: 50,000 hours at 60C Sleeve Bearing: 20,000 hours at 45°C Net Weight 520 grams
Price: 100-200tons = lme-1% 200-500tons = lme-2.5% 500-1000tons = lme-5% Payment: l/c at sight(irrevocable) Shipping term:fob Origin : laos Type :copper cathode Copper : 99, 97% min. Cobalt : 0, 2ppm max. Lead : 0, 2ppm max. Aluminum : 0, 5ppm max. Manganese : 0, 1ppm max. Nickel: 0, 2ppm max. Antimony : 0, 1ppm max. Arsenic : 0, 1ppm max. Silica : 0, 3ppm max. Bismuth : 0, 1ppm max. Tellurium : 0, 05ppm max. Silver : 10ppm max. Selenium : 0, 3ppm max. Sulphur : 4ppm max. Magnesium :0, 4ppm max. Oxygen : 0 Purity : 99, 99%-99, 97% min. Thickness : 0.1mm-150mm Width : 10mm-1500mm Length : 1m-12m, or as required Hardness : 1/16 hard, 1/8 hard, 1/4 hard, 1/2 hard, full hard. Surface : polished, bright, oiled, hair line, brush, mirror, or as required
Outdoor antennas, indoor antennas, satellite taps, satellite splitters, baluns, TV wallplates, audio & video leads, adaptors, connectors, crimp tool.FOB & CIF
Hello! Thanks for reading our selling lead as follows. My name is Alex, a third-generation successor of family business group. We are experieced in the trading area and dealing with various products(such as electronic, plastic, rubber....etc.) in Asia until now. We also provide excellent Sintered NdFeB Magnet and Bonded NdFeB magnets for multipurposes. We have confident and want to mention our important principle again - we always pay more attention to the quality of products than customer itself. Please refer to our company profile in order to realize more or visit our website: http://www.sssmile.com.tw/English/main.asp Certificated by D-U-N-S(Dun & Bradstreet) https://www.directory.dnb.com/profiles/en/SUN-SMILE-CORPORATION-347529.html Thanks. Sun Smile Corporation Alex
Description Hello! Thanks for reading our selling lead as follows. My name is Alex, a third-generation successor of family business group. We are experieced in the trading area and dealing with various products(such as electronic, plastic, rubber....etc.) in Asia until now. We also provide excellent rubber mat, path, brick and products for multipurposes. We have confident and want to mention our important principle again - we always pay more attention to the quality of products than customer itself. Please refer to our company profile in order to realize more or visit our website: http://www.sssmile.com.tw/English/main.asp Certificated by D-U-N-S(Dun & Bradstreet) https://www.directory.dnb.com/profiles/en/SUN-SMILE-CORPORATION-347529.html Thanks. Sun Smile Corporation Alex
Hello! Thanks for reading our selling lead as follows. My name is Alex, a third-generation successor of family business group. We are experieced in the trading area and dealing with various products(such as electronic, plastic, rubber....etc.) in Asia until now. In addition, we also invested and have our own lost wax and other casting factories in China, producing excellent casting parts and export to Europe, Japan and Austrilla so far. We have confident and want to mention our important principle again - we always pay more attention to the quality of products than customer itself. Please refer to our company profile in order to realize more or visit our website: http://www.sssmile.com.tw/English/main.asp Certificated by D-U-N-S(Dun & Bradstreet) https://www.directory.dnb.com/profiles/en/SUN-SMILE-CORPORATION-347529.html Thanks. Sun Smile Corporation Alex
Hello! Thanks for reading our selling lead as follows. My name is Alex, a third-generation successor of family business group. We are experieced in the trading area and dealing with various products(such as electronic, plastic, rubber....etc.) in Asia until now. We also provide excellent cylinder, screw, screw and barrel assembly parts for multipurposes. We have confident and want to mention our important principle again - we always pay more attention to the quality of products than customer itself. Please refer to our company profile in order to realize more or visit our website: http://www.sssmile.com.tw/English/main.asp Certificated by D-U-N-S(Dun & Bradstreet) https://www.directory.dnb.com/profiles/en/SUN-SMILE-CORPORATION-347529.html Thanks. Sun Smile Corporation Alex
Digimore KB-6868 was the best-selling keyboard ever 18 years ago. We refurbished moldings and re-launched it with new functionality, 24 anti-ghost keys. KB-6868 is a very classic design with the enhanced layout as the original IBM Model M keyboard. Apart from its ergonomic keycap with 5 different heights and S-curve body design, it also has the cable management system for hiding the excess cable on the back. It is made in Taiwan. KEYBOARD SPECIFICATION - Key Number: 105/ 106/ 110 Keys (US/ EU/ JP) - Key Switch: Membrane with 10 million life cycle time - Key Force/ Traveling Distance: 50 +/- 7 gm; 4 +/- 0.5 mm - Key Caps: 5 different height of ergonomic keycap design - Input Power: 5 VDC, 100mA - Interface: USB 1.1 version - LED Indicator: 4 LEDs, Num Lock, Caps Lock, Scroll Lock, Gaming Mode (Blue LED) - Special Setting for Gaming Features: Activate Gaming Mode by holding Fn key and pressing Left Windows key Locking Windows keys by holding Fn key + pressing left Windows Key Swapping ASDW keys with 4 arrow keys by holding Fn + pressing W key Anti-Ghost keys Area, QWERT, CapsLock, ASDFG, Left Shift, ZXCVB, Left Ctrl, Space Bar and arrow keys, allow to press simultaneously up to 24 keys - Compatibility: Fully compatible for Windows XP/ Vista/ Windows 7 or later OTHERS - Physical Dimension: 465.63 (L) x 171.99 (W) x 29.84 (H) - Box/ Weight: 490 (L) x 200 (W) x 45 (H) mm / 1.17 Kg (G.W.) - Packing Information QTâ??Y/ Carton: 5 pcs/ctn; 1.39 cuft/ctn; 8.0 kgs (G.W.); Carton Size: 51.5 x 30.5 x 25 cm
UDK-CC2540, USB Dongle is a development kit for user to design Bluetooth Low Energy (BLE) application with integrated USB to the system with existing USB host. UDK-CC2540 USB Dongle contains a Bluetooth module BT02-2 using TI Bluetooth low energy controller CC2540. TI CC2540 is a world-leading chip in Bluetooth Low Energy 4.0 and offers variety of peripherals such as USB, UART, SPI and Timer. UDK-CC2540 USB Dongle also embeds a High-PSRR 300mA LDO, Buttons and LEDs, and General Purpose I/O Test Points. The Dongle can let user focus on their project development and verify the project easily and rapidly. FEATURES: * BT02-2 Bluetooth Module with TI CC2540 - Bluetooth version 4.0 low energy (LE, single mode) compliant - High-performance and low-power 8051 Microcontroller core with code prefetch - In-system-programmable flash, 256KB - 12-Bit ADC with eight channels and configurable resolution - 21 general purpose I/O - Full-Speed USB Interface - Power USARTs with support for several serial protocols - On board PCB Antenna and Crystal - Module dimension: 14.8 x 10mm * LDO - Fast Ultra High-PSRR, Low-Noise 300mA CMOS LDO - 3.3V Output Voltage * Variety of Individual Pin Header Sections - Flash Programming and Debugging - General Purpose I/O (GPIO) * Buttons and LEDs - Input / output function control * Dongle Dimension: 16mm x 41mm (PCBa) ; 16mm x 56mm (including USB connector)
EVK-CC2541 (CC2640), BLE LaunchPad/ Development Kit, is an entire development kit for user to design Bluetooth Low Energy (BLE) application. It contains a Digimore Bluetooth module BT01-2 using TI Bluetooth low energy controller CC2541. TI CC2541 is a world-leading chip in Bluetooth Low Energy 4.0 and offers variety of peripherals such as UART, SPI, I2C and Timer. EVK-CC2541 (CC2640) also embeds a famous FTDI FT232R USB-UART interface chip, a High-PSRR 300mA LDO, Buttons and LEDs. The LaunchPad can let user focus on their project development and verify the project easily and rapidly. FEATURES: * BT01-2 Bluetooth Module with TI CC2541 - Bluetooth version 4.0 low energy (LE, single mode) compliant - High-performance and low-power 8051 Microcontroller core with code prefetch - In-system-programmable flash, 256KB - 12-Bit ADC with eight channels and configurable resolution - 21 general purpose I/O - I2C interface - Power USARTs with support for several serial protocols - Module dimension: 14.8 x 10mm * FTDI FT232R - USB 2.0 Full Speed compatible - Entire USB protocol handled on the chip. No USB specific firmware programming required - FTDIâ??s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases - Data transfer rates from 300 baud to 3M baud (RS422, RS485 and RS232) at TTL levels - Transmit and receive LED drive signals - UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity - Alternative Jumper Design to use the function of FT232R independently * LDO - Fast Ultra High-PSRR, Low-Noise 300mA CMOS LDO - 3.3V Output Voltage * Mini USB Type B Connector - To PC communication - Supply Main Power * Variety of Individual Pin Header Sections - Power Source Option - General Purpose I/O (GPIO) - Peripherals - Flash programming and debugging * Buttons and LEDs - Input / output function control * LaunchPad Dimension: 55mm x 40mm
Lead acid battery.Manufacturer
Product Features : 1.Strong adhesion and economical choice. 2.Quick setting and curing time. 3.Easy and quick use. 4.Suitable for dry fastening. 5.Suitable for wall and overhead application. 6.Reduced anchor spacing and edge distance. 7.Variety of cartridge sizes are available. 8.Partially used cartridges can re-used by replacing the mixer nozzle. Base Material : Concrete,solid masonry ,and hollow bricks masonry. Application : Fixing machines,handrails,steel constructions,and reinforcement bars. Shelf Life : 12 months after the manufactured day if stored in perfect conditions.
CS-613W is 2-component water-based premium epoxy product. CS-613W as admixtures can improve the properties, particularly in relation to water absorption reduction, toughness enhancement, vibration damping and increase of the bond strength of cement to reinforcements other than being used as admixtures, CS-613W is used partial replacement of fine aggregate, for coating, sealing and repairing concrete and for coating steel reinforcing bars for corrosion protection. AREA OF APPLICATIONS Repair mortar for concrete areas. Industrial flooring. Bonding agent for new to old concrete. As water based primer. Can be applied with damp surface. FEATURE Weatherproof and waterproof of capabilities that help prevent the deterioration of the ground-coat material. Low odor. Washable with water including tools. Best to wash as soon as possible before it hardens.100% water resistant when cured.
Description CP-358W2K is a product which can be painted on rusty iron sheet, iron and other alloy products. Normally, iron products should get the rust removal by sand blast first when they get rusty. Then, they get painted with the anti-rust coating and fireproof paint. If it does not get the rust removal first and directly get painted, the rust will spit out. But, the same situation will not happen if using CP-358W2K. Features/Advantages Quick and easy to use. Fireproof coating. â?? Hydrophilic. â?? Water-based. â?? Non-toxic & smokeless. Environmentally friendly. Can be applied well on steel construction body, steel bar, and steel sheet. Does not blister and get damaged when burning. Rust removal is not required when applying CP-358W2K (unless the rust is thick). Applications Can be used in rocket missile or products that high-temperature application is required. Heating pipe. Iron plate or sheet. Indoor/outdoor fireproof paint. Multiple iron materials/fireproof paint. Plywood, veneer board. Fire door surface treatment.
PREPARATIONS The substrate, bolt and anchor holes must be clean, sound, dry and free of oil, grease, without laitance and loose particles. Prewet the bolt holes thoroughly, but no standing water in it. Before applying ITLS CA-007H absorbent substrates must be saturated thoroughly, but without standing water. MIXING Mix 3.2-4.4 liters of clean water with 25kg bag of ITLS CA-007H together. To add water based on the condition of stirring and keep stirring around 5 minutes until grouting well. APPLICATIONS Pour ITLS CA-007H mortar after mixing into the reserved cavities and recesses use the stick or bar to remove the air bubble, ensure that air entrapped into the grout is allowed to escape. Suggest to blend the grout by auto-mixer for better application. COVERAGE 25 Kg ITLS CA-007H when mixed with water will produce approx. 13.5 liters of Liquid Grouting Mortar. ITLS CA-007H suggest to be placed in thickness ranging from 10-15cm/layer.
ITLS-RB is a flexible high-performance sound barrier. It is a low-stiffness material which improves the sound transmission loss by effectively blocking noise. ITLS-RB has a reinforced backing to further enhance its mechanical strength. It is designed for hanging-up applications where the material is typical used as an acoustic curtain. ITLS-RB is a high temperatures resistant noise barrier. It provides excellent soundproofing effect at a wide range of temperatures, typically from -40°C to +140°C, where other traditional noise barriers would fail. ITLS-RB meets with GM Holden specification HN2483 requirements. Key Features *Durable & flexible *Suitable for hung-up applications *Easily cut, fabricated and installed *Contains no lead, non toxic *May be stapled or nailed into position *Suitable for elevated temperatures up to 140°C(Intermittent) Key Benefits *Proven soundproofing performance *Economical *Low installation cost *Easy to handle
DESCRIPTION Power Screw adhesive is one of ITLS new range of power adhesives developed to give a cost effective and high adhesion performance. It is very low in odor and free of aromatic solvent for use indoor and outdoor. It was designed for use by both the home handy man and professionals. Power Screw adhesive which consists of tough elastomeric rubber, tackifying resins and Light hydrocarbon solvent. Power Screw can be used in most common construction materials. The substrates are timber, plywood, MDF, particle board, hard board, plaster board, cementitious fibrous board, concrete, ceramic, aluminum, ,mild steel, galvanized iron sheet, back of mirror (on wall only). FEATURES *Unique user friendly, highly pseudo-plastic and non runny characteristic making it TRULY easy to use on vertical wall and ceiling. * Extremely easy to extrude from cartridges in winter making it an all round product for use in all seasons. * Gap filling because of its higher solid content and especially it is highly pseudo-plasticity (soft smooth by stiff, non-sagging) property. * Flexible but tough for use around home and in construction * Easy on hand to extrude and apply due to its unique consistency. *Easy to spread our adhesive evenly and thinly due to its soft buttery consistency. * Broad application for most timber based, cementitious substrates, ceramic and most common metallic construction products. * Printable when dried. * Help to spread out pressure on bonded materials thereby prevent localized stress leading to adhesion failure.
Upgrade your cutting room with TAC Automatic Cutting Machines and experience class-leading performance. Our machines are powered by Japanese technology and developed with Taiwanese engineering, specifically designed for thin fabrics. With our advanced cutting technology, you can enjoy improved productivity on your shop floor. Our machines are built to deliver reliable and efficient cutting performance. Don't settle for less, choose TAC for your cutting needs and experience the difference in performance.