EVK-CC2541 (CC2640), BLE LaunchPad/ Development Kit, is an entire development kit for user to design Bluetooth Low Energy (BLE) application. It contains a Digimore Bluetooth module BT01-2 using TI Bluetooth low energy controller CC2541. TI CC2541 is a world-leading chip in Bluetooth Low Energy 4.0 and offers variety of peripherals such as UART, SPI, I2C and Timer.
EVK-CC2541 (CC2640) also embeds a famous FTDI FT232R USB-UART interface chip, a High-PSRR 300mA LDO, Buttons and LEDs. The LaunchPad can let user focus on their project development and verify the project easily and rapidly.
FEATURES:
* BT01-2 Bluetooth Module with TI CC2541
- Bluetooth version 4.0 low energy (LE, single mode) compliant
- High-performance and low-power 8051 Microcontroller core with code prefetch
- In-system-programmable flash, 256KB
- 12-Bit ADC with eight channels and configurable resolution
- 21 general purpose I/O
- I2C interface
- Power USARTs with support for several serial protocols
- Module dimension: 14.8 x 10mm
* FTDI FT232R
- USB 2.0 Full Speed compatible
- Entire USB protocol handled on the chip. No USB specific firmware programming required
- FTDIâ??s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases
- Data transfer rates from 300 baud to 3M baud (RS422, RS485 and RS232) at TTL levels
- Transmit and receive LED drive signals
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
- Alternative Jumper Design to use the function of FT232R independently
* LDO
- Fast Ultra High-PSRR, Low-Noise 300mA CMOS LDO
- 3.3V Output Voltage
* Mini USB Type B Connector
- To PC communication
- Supply Main Power
* Variety of Individual Pin Header Sections
- Power Source Option
- General Purpose I/O (GPIO)
- Peripherals
- Flash programming and debugging
* Buttons and LEDs
- Input / output function control
* LaunchPad Dimension: 55mm x 40mm
ST2760 is a internal JBOD module, which supports two 2.5� SATA hard drive, you can store the operating system and data file in different hard drive or use it with a RAID card. It is designed to has the same dimension as one 3.5� hard drive or one floppy size, this allows you to install ST2760 in the mini-Server, Surveillance Server, 1U Server, eMail Server and POS System that has limited space. ST2760 can help you to save the problem of requiring larger capacity but with limited space. Model No ST2760-2S-S2 Drive Bay 3.5" Floppy DriveBay Drive Fit 2.5" SATA III HDD x 2 (9.5mm thickness) RAID Level JBOD Host Interface SATA III Connector (7Pin) x2 Power Supply SATA Connector (15Pin) HDD Access Indicator LED Color Matt Black Structure Metal Body Dimensions 101.7W x 147L x 25.8H(mm) Weight 0.4(kg) Certifications CE & FCC Operating System Support Windows, Linux Packing Content Accessory Kit HDD Capacity Single HDD tested up to 2TB Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
The RAIDON iR2623-S3 is a fault-tolerant hard disk array which is easy to install and hot-swappable allowing drives to be replaced while the power is on. It is suitable for applications such as professional workstations, file servers and as real-time backup storage systems. The iR2623-S3â??s disk array is made up of two 3.5" hard disks, augmented by a 2.5" hard disk or SSD extractable tray with a separate SATA interface to diversify usage. The iR2623-S3 is a dual function storage device, offering data security and removable storage for on the go data transport. Model No iR2623-S3 Interfaces 6Gbps SATA III 1 Ports ( 3.5" RAID Module ) / 6Gbps SATA III 1 Ports ( 2.5" HDD/SSD ) Compatible Drive 2 x 2.5"/3.5" SATA III (6.0 Gbits) HDD/SSD + 1 x 2.5" SATA III (6.0 Gbits) HDD/SSD Storage Mode RAID 1 or RAID 0 ( 3.5" RAID Module ) +Independent volume( 2.5" HDD/SSD ) Operating System Windows, Linux Function Control Interface GUI (Windows Only) Electrical and Operating Requirements * Line voltage: 12V + 5V DC * Maximum continuous power: 60W * Operating temperature: 32° to 104° F (0° to 40° C) * Storage temperature: -4° to 116° F (-20° to 47° C) * Relative humidity: 5% to 95% noncondensing Size and Weight 148 mm (W) x 84 mm (H) x 202 mm (D) , 1.2 Kg Product Code EAN:4711132864984 UPC:884826503668 Carton 8 pcs per carton Package Accessories * iR2623-S3 x 1 * SATA Cable x 2 * Internal RS232 cable x 1 * External RS232 cable x 1 * Accessory kit * Quick Installation Guide
SR2611-2S-S2R+ is an internal (6Gbps) RAID module designed in 2 of 5.25� CD-ROM bay to satisfy the demands of SMB and industrial computing environment. With LCD tents leaving you to easily grasp HDD status. SR2611-2S-S2R+ accommodates 2 of 3.5 � SATA III hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of two hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown. Model No SR2611-2S-S2R+ Drive Bay 2 CDRom DriveBay Drive Fit 2.5"/3.5" SATA III HDD x 2 Host Interface SATA III Connector (7Pin) RAID Level RAID 0 / RAID 1 Hot-Swap RAID 1 Power Supply 15 PIN Power Connector x1, BIG 4Pin Connector x 1 Engineering Configuration Port RS232 Status Display LCD Display Cooling Fan 6cm Fan Buzzer Alarm Yes Environment Detector Fan Failure / Overheat Dimension & Weight 146 ( W ) x 196 ( L ) x 85 ( H ) mm / 1.3 KG Certifications CE / FCC Operating System Windows, Linux Function Control Interface GUI (Windows Only) Packing Content SATA Cable�Internal RS232 Cable�External RS232 Cable�Accessory Kit HDD Capacity Single HDD tested up to 8TB RAID 0 Operating temperature 32° to 104° F (0° to 40° C) Storage temperature 32° to 104° F (0° to 40° C) Relative humidity 5% to 95% noncondensing
InTANK iR2771-S3 has a patented design that allows two 2.5â?� SATA drives to be fitted into one 3.5â?� drive space! Itâ??s equipped with optional RAID 0 to enhance the speed of transfer compare to a regular hard drive or switch to RAID 1 for an efficient and securer data backup. iR2771-S3 internal RAID module supports SATA III 6.0 Gb/s host interface and SATA 22 pin power supply; the connectorâ??s location exactly as the same as a 3.5â?� hard drive. Thus, it is not necessary to install any other brackets but just install the iR2771-S3 inside to existing operating system and then the system will be upgraded as a RAID storage! Model no. iR2771-S3 Interface SATA III 6.0 Gb/s Support Hard Drive 2Ã?2.5â?� SATA III 6.0Gb/s HDD/SSD RAID Level RAID 0,1 The Largest Capacity 2TB Power Supply SATA 15pin (12v/5v) LED Indicators Yes Operating System Windows, Linux Function Control Interface GUI (Windows Only) Certification CE & FCC Packing Content Quick Installation Guide, Accessory Kit Dimension 102(W)Ã?26(H)Ã?147(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
InTANK iR2772-S3 has a patented design that allows two 2.5â?� SATA drives to be fitted into one 3.5â?� drive space! Itâ??s equipped with optional RAID 0 to enhance the speed of transfer compare to a regular hard drive or switch to RAID 1 for an efficient and securer data backup. RAIDON iR2772-S3 internal RAID module supports SATA III 6.0 Gb/s host interface and SATA 22 pin power supply; the connectorâ??s location exactly as the same as a 3.5â?� hard drive. Thus, it is not necessary to install any other brackets but just install the iR2772-S3 inside to existing operating system and then the system will be upgraded as a RAID storage! iR2772-S3 provides RS232 port, user can monitor the status of the system via their own program. Model no. iR2772-S3 Interface SATA III 6.0 Gb/s Support Hard Drive 2Ã?2.5â?� SATA III 6.0Gb/s HDD/SSD RAID Level RAID 0,1 The Largest Capacity 2TB Power Supply SATA 15pin (12v/5v) LED Indicators Yes Operating System Windows, Linux Certification CE & FCC Function Control Interface GUI (Windows Only) Packing Content Quick Installation Guide, Accessory Kit Dimension 102(W)Ã?26(H)Ã?157(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
Product description: General Features Industrial design Aluminum casing Wireless access to internet Based on Wavecom module Q24 Plus With TCP/IP stack Internet Services: PPP,TCP, UDP, HTTP, SMTP, POP3 Open AT Flash memory 32MB, PSRAM 16MB 850/900/1800/1900MHZ 3V SIM card slot DB15 RS232 interface including RJ11 for voice(handset) SIM Application Toolkit Double tone multi-frequency function (DTMF) Send and receive voice, data, e-mail, SMS GPRS Class 10 Antenna with high sensitivity Always on-line Comply with ETSI GSM Phase2+ standard Output Power Class 4 2W @ 850/900MHz Class 1 1W @ 1800/1900MHz I Input voltage DC6V-36V Input current 1A-2A Standby current: 56mA Working current: 100-140mA Working temperature -20 to +55 degrees Storage temperature:-25 to +70 degrees. Size 95*54*25mm Weight 110g Accessories: AC/DC adaptor, DB15 RS232 cable, antenna, 2 mounting plates, CD Specification for data GPRS Class 10 max.85.6kbps(downlink PBCCH support Coding schemes CS 1,2,3,4 CSD up to 14.4kbps USSD Non-transparent mode Transparent mode Specifications for SMS via GSM/GPRS Point to point MO and MT SMS cell broadcast Text and PDU mode. Size 95*54*25mm Weight 110g.
RS232+USB 3G/HSDPA MODEM with voice Product description: General features Industrial design Aluminum casing RS232+USB interface Based on Simcom module SIM5216E With TCP/IP stack WCDMA/HSDPA 900/2100MHZ GSM/GPRS/EDGE:850/900/1800MHZ GPRS class 12 EDGE class 12 UMTS/HSDPA 3GPP release 5 GSM 3GPP release 99 LED for signal Jack for earphone SIM application toolkit 3V SIM card slot Internet, data and SMS service Output Power Class 4 (2W 850/ 900MHz GSM) Class 1(1W 1800MHz GSM) Class 3 (0.25W 900/2100MHZ) Input voltage 7.5V-30V DC Input current 1A-2A Standby current 56mA Working current 100-140mA Working temperature -30 to +80 degrees Storage temperature -40 to +85 degrees Size 85*54*25mm Weight 100g Accessories AC/DC adaptor, DB9 RS232 cable, USB cable, earphone, antenna, 2 mounting plates, CD Spec for Data HSDPA Max. 3.6 mbps (DL) WCDMA Max. 384 Kbps (DL), Max.384Kbps (UL) EDGE Max. 236. 8 Kbps (DL),Max118 Kbps (UL) GPRS Max. 85.6 Kbps (DL), Max.42.8 Kbps (UL) CSD 2.4/4.8/9.6/ 14.4kbps, Non-transparent mode GPRS coding scheme: CS 1-4 EDGE coding scheme: MCS 1-9 PAP,PPP, PBCCH USSD UMTS R99 Spec for SMS MO, MT,CB SMS Cell broadcast Text and PDU mode Spec for voice HR FR EFR AMR. Size 85*54*25mm Weight 100g.
USB 3G/HSDPA Modem Model: D-6280W Product Description: Based on Qualcomm chipset MSM6280 HSDPA/WCDMA/UMTS 2100MHZ EDGE/GPRS/GSM 900/1800MHZ HSDPA downlink up to 7.2 mbps UMTS (WCDMA) up to 384 kbps EDGE up to 237 kbps GPRS up to 85.6 kbps Embedded antenna with high sensitivity More stable, faster, Automatic software installation (no CD) LED for status and data 2.0 USB interface 3V movable SIM slot Micro SD card slot (4GB) Wireless access to internet Send and receive SMS, data, e-mail Always online Input voltage: 5V Standby current: 10 mA Working current: 200-300mA Working temperature: -10 to+55 degrees Storage temperature: -20 to+60 degrees Compatible with Windows 2000/XP/Vista/ 7 Size:88x22x 7mm Weight: 26g Accessories: manual. Plastic gift box: 19x13.5x2.3cm Master carton: 45x20x13cm/15 pcs/2.5kg.
Supplier: GSM/GPRS/EDGE/HSDPA/HSUPA/CDMA/GPS modems/ modem pool and modem cards, evaluation kits for testing modules, wireless communication parts and various cables
Services: OEM
