Features: 1.Pocket-size transmitter, light, more handy for operation. 2abs+pc transmitter housing, water/shock/dust proof. 3.Transmitter 2-4 functions equipped with a push type emergency stop button. 4.Receiver with 4-led, quick, simple judgment for operation status &after services. Transmitter: Technical data: Operation distance:30m(open space) Frequency:fm418/433mhz Output power:
Features: 1.Pocket-size transmitter, light, more handy for operation. 2abs+pc transmitter housing, water/shock/dust proof. 3.Transmitter 2-4 functions equipped with a push type emergency stop button. 4.Receiver with 4-led, quick, simple judgment for operation status &after services. Transmitter: Technical data: Operation distance:30m(open space) Frequency:fm418/433mhz Output power:
Provides an even heatingéô ge made copper nickel heating coil with 3.0mm of silicon for surface protection, maximum heat-resists can go up to 200é¦c. Special pattern is parallel to the tires rotation and proper insulation creates an à£oven éôeffect» to provide even heating. On target temperature éô directly imported from germany with special tight tolerance thermostatic controller on target for a tires operating temperature at 70é¦ c. Multi-resistant fabric éô manufactured from heavy duty, water and heat resistant materials. Thermally insulated to save energy. Burn proof liner éô high temperature resisting fabric made from oxidized pan fiber (pano) has the best fireproof character, with this material makes our warmer less tend to possible damage from misuse. Lcd monitor éôlcd monitor displays an optimum temperature when tire warmers in operation. Fast to install and remove . Certification - ce approved Hard tire warmer carry case Temperature to approx. 100é¦c Very easy to use, no chords to adjust. Laterally curved to fit the tire exactly, covering the rim. Suitable for bikes from 125-1000cc+ 600 watt consumption Voltage: 220v
Hot-stamping machine Application : Business card, envelope, season greeting card and label Hot-stamping signing bar for credit card. Vip card, phone card. Ticket card... And various kinds of plastic cards and printing for shell. Size of the machine(mm) : 1140*540*600 Printing speed(sheet/hour) : 2100/4200 Max.Sheet size(mm) : 100*180 Max.Printingarea(mm) : 95*150 Power required 110/220v 1 phase for : 1/2hp motot Machine weight : Nw,170kgs Gw,210kgs Min.Sheet size(mm) : 25*40
Product: stainless steel in coil / sheet / plate / strip grade: 201 / 202 / 301 / 304 / 304l / 409 / 430 / 410/ 316l / 321 finish: no.1 / 2b / ba / no.4 / hl / sb / no.8 / decoration / color.
2 in 1 door guard, sliding wardrobe rod, security bar, rotating hanger rack.
Durable Construction: GT-SD101 is constructed from zinc alloy with quality polishing and finish to complement your home decor. It's anti-rust rust. GT-SG101 can be locked & unlocked easily from the inside with swinging arm for secondary lock.
Durable Construction: GT-SD101 is constructed from zinc alloy with quality polishing and finish to complement your home decor. It's anti-rust rust. GT-SG101 can be locked & unlocked easily from the inside with swinging arm for secondary lock.
(1) Counterclockwise rotating hanger arm is flattened against the wall when not in use for optimal storage space. (2) 6-hole hanger rack is ideal for organizing business garments while keeping them wrinkle-free in the office. (3) The ""round hanging ring"" design allows multiple hangers in each loop at all times.
2-in-1 Door Guard Model : GT-DG001 Material : Zinc Alloy Weight 210 g Dimension : 100 x 40 x 27.30 mm Suggested Width of Door Frame : 40.5 mm at least Finish : Chrome Plated, Bronze Plated, Antique Bronze, Antique Copper Taiwan Patent No. M565233 (1) Door guard is constructed of thicken solid zinc alloy. It's strong and durable. (2) 3.93" long swing arm folds over the closed door to protect your home security. (3) Unique hidden buckle that locks swing arm in place for secondary security. (4) Easy daily operation: Locks and unlocks easily from the inside in case of emergency.
Features: (1) Delicate printed coordinates for easy recognition and calculation. (2) Board body made by advanced POM material to avoid static electricity and frequency interference. (3) It accommodates all sizes of DIP IC and discrete components with diameters 0.65±0.1m/m, interconnect wires 20-28AWG(ø0.3-ø0.8mm). (4) Spring contact uses phosphor bronze/nickel-plated with highly elasticity and good conductive, can stand operation more than 10, 000 times. (5) Max. allowable voltage/current:48Volts/5Amps. (6) WBU-2xx Series is a valuable tool.No signal interference caused screen white dot. Suitable to design high level prototypes whether in R&D application or university laboratories.
Price: 100-200tons = lme-1% 200-500tons = lme-2.5% 500-1000tons = lme-5% Payment: l/c at sight(irrevocable) Shipping term:fob Origin : laos Type :copper cathode Copper : 99, 97% min. Cobalt : 0, 2ppm max. Lead : 0, 2ppm max. Aluminum : 0, 5ppm max. Manganese : 0, 1ppm max. Nickel: 0, 2ppm max. Antimony : 0, 1ppm max. Arsenic : 0, 1ppm max. Silica : 0, 3ppm max. Bismuth : 0, 1ppm max. Tellurium : 0, 05ppm max. Silver : 10ppm max. Selenium : 0, 3ppm max. Sulphur : 4ppm max. Magnesium :0, 4ppm max. Oxygen : 0 Purity : 99, 99%-99, 97% min. Thickness : 0.1mm-150mm Width : 10mm-1500mm Length : 1m-12m, or as required Hardness : 1/16 hard, 1/8 hard, 1/4 hard, 1/2 hard, full hard. Surface : polished, bright, oiled, hair line, brush, mirror, or as required
Features: (1)Advanced POM material make the insertion hole is hardly deformed when sustaining continuous Insert and pull out. Static electricity and frequency interference is precluded also. (2) Round pin jacks help component's pin to insert and fit perfectly. Components plug-in and replacement is easy and convenient with good conductive. (3) A landscape arrangement for easy of assembly operation. Conform the work flow of PC board. (4) The power distribution strip provide 4 sections of anode for using different voltages at the same time. 45 junctions provided for negative circuit. (5) Delicate printed coordinates for easy recognition and calculation. (6) Spring contact uses phosphor bronze/nickel-plated with highly elasticity and good conductive ensuring reliable connections, it can stand operation more than 10, 000 times. (7) It accommodates all sizes of DIP IC and discrete components with diameters 0.65±0.1m/m, interconnect wires 20-28AWG(ø0.3-ø0.8mm). (8) Design of protrusion tail and latch groove keep the two adjacent boards mating together tightly(A perfect distance from one board to another). A V-shape cross section groove allows DIP IC to insert which increase the rate of utilization. (9)Max. allowable voltage/current:48Volts/5Amps. Trade Term & Delivery?: (1)Quotes are based on F.O.B Taiwan port US$. (2)Payment term: T/T in advance. (3)Delivery: within 2~3 weeks after receipt of T/T(wire transfer). --- O.E.M./O.D.M orders are welcome --- ALL THE WISH PRODUCTS ARE 100% MADE IN TAIWAN. **REGISTERED TRADEMARKS ** PLEASE PURCHASE GENUINE PRODUCT. COUNTERFEITING NOT ALLOWED.
Features: (1) Coordinates molded in convex character. The operator can recognize and calculate easily. (2) Board body made by advanced POM material preclude static electricity and frequency interference. (3) Square insertion hole design with straight arrangement. The insertion hole is hardly deformed when sustaining continuous Insert and pull out. (4) Spring contact uses phosphor bronze/nickel-plated with highly elasticity and good conductive ensuring reliable connections, it can stand operation more than 10, 000 times. (5) Durable aluminum base plate treated with a special coating to avoid static electricity. (6) It accommodates all sizes of DIP IC and discrete components with diameters 0.65±0.1m/m, interconnect wires 20-28AWG(ø0.3-ø0.8mm). (7) Allowed more application of DIP IC pins insertion. The pin of DIP chips can be crossed without interfere with each other when proceeding test. (8) Max. allowable voltage/current:48Volts/5Amps. (9) Reliableconnection of Mini Self-Adhesive Round hole Breadboard ensure trustworthy of test and building small electronics design project. Multipack includes the basic needs and can be transferred to a circuit board quickly and easily. Trade Term & Delivery?: (1)Quotes are based on F.O.B Taiwan port US$. (2)Payment term: T/T in advance. (3)Delivery: within 2~3 weeks after receipt of T/T(wire transfer). --- O.E.M./O.D.M orders are welcome --- ALL THE WISH PRODUCTS ARE 100% MADE IN TAIWAN. **REGISTERED TRADEMARKS ** PLEASE PURCHASE GENUINE PRODUCT. COUNTERFEITING NOT ALLOWED.
Copper Oxide, Nickel Oxide, Cobalt Oxide And The Other Metal Oxide. Special Solvent And Electronic Ferrite And Inductance..
Digimore KB-6868 was the best-selling keyboard ever 18 years ago. We refurbished moldings and re-launched it with new functionality, 24 anti-ghost keys. KB-6868 is a very classic design with the enhanced layout as the original IBM Model M keyboard. Apart from its ergonomic keycap with 5 different heights and S-curve body design, it also has the cable management system for hiding the excess cable on the back. It is made in Taiwan. KEYBOARD SPECIFICATION - Key Number: 105/ 106/ 110 Keys (US/ EU/ JP) - Key Switch: Membrane with 10 million life cycle time - Key Force/ Traveling Distance: 50 +/- 7 gm; 4 +/- 0.5 mm - Key Caps: 5 different height of ergonomic keycap design - Input Power: 5 VDC, 100mA - Interface: USB 1.1 version - LED Indicator: 4 LEDs, Num Lock, Caps Lock, Scroll Lock, Gaming Mode (Blue LED) - Special Setting for Gaming Features: Activate Gaming Mode by holding Fn key and pressing Left Windows key Locking Windows keys by holding Fn key + pressing left Windows Key Swapping ASDW keys with 4 arrow keys by holding Fn + pressing W key Anti-Ghost keys Area, QWERT, CapsLock, ASDFG, Left Shift, ZXCVB, Left Ctrl, Space Bar and arrow keys, allow to press simultaneously up to 24 keys - Compatibility: Fully compatible for Windows XP/ Vista/ Windows 7 or later OTHERS - Physical Dimension: 465.63 (L) x 171.99 (W) x 29.84 (H) - Box/ Weight: 490 (L) x 200 (W) x 45 (H) mm / 1.17 Kg (G.W.) - Packing Information QTâ??Y/ Carton: 5 pcs/ctn; 1.39 cuft/ctn; 8.0 kgs (G.W.); Carton Size: 51.5 x 30.5 x 25 cm
Product Features : 1.Strong adhesion and economical choice. 2.Quick setting and curing time. 3.Easy and quick use. 4.Suitable for dry fastening. 5.Suitable for wall and overhead application. 6.Reduced anchor spacing and edge distance. 7.Variety of cartridge sizes are available. 8.Partially used cartridges can re-used by replacing the mixer nozzle. Base Material : Concrete,solid masonry ,and hollow bricks masonry. Application : Fixing machines,handrails,steel constructions,and reinforcement bars. Shelf Life : 12 months after the manufactured day if stored in perfect conditions.
CS-613W is 2-component water-based premium epoxy product. CS-613W as admixtures can improve the properties, particularly in relation to water absorption reduction, toughness enhancement, vibration damping and increase of the bond strength of cement to reinforcements other than being used as admixtures, CS-613W is used partial replacement of fine aggregate, for coating, sealing and repairing concrete and for coating steel reinforcing bars for corrosion protection. AREA OF APPLICATIONS Repair mortar for concrete areas. Industrial flooring. Bonding agent for new to old concrete. As water based primer. Can be applied with damp surface. FEATURE Weatherproof and waterproof of capabilities that help prevent the deterioration of the ground-coat material. Low odor. Washable with water including tools. Best to wash as soon as possible before it hardens.100% water resistant when cured.
Description CP-358W2K is a product which can be painted on rusty iron sheet, iron and other alloy products. Normally, iron products should get the rust removal by sand blast first when they get rusty. Then, they get painted with the anti-rust coating and fireproof paint. If it does not get the rust removal first and directly get painted, the rust will spit out. But, the same situation will not happen if using CP-358W2K. Features/Advantages Quick and easy to use. Fireproof coating. â?? Hydrophilic. â?? Water-based. â?? Non-toxic & smokeless. Environmentally friendly. Can be applied well on steel construction body, steel bar, and steel sheet. Does not blister and get damaged when burning. Rust removal is not required when applying CP-358W2K (unless the rust is thick). Applications Can be used in rocket missile or products that high-temperature application is required. Heating pipe. Iron plate or sheet. Indoor/outdoor fireproof paint. Multiple iron materials/fireproof paint. Plywood, veneer board. Fire door surface treatment.
PREPARATIONS The substrate, bolt and anchor holes must be clean, sound, dry and free of oil, grease, without laitance and loose particles. Prewet the bolt holes thoroughly, but no standing water in it. Before applying ITLS CA-007H absorbent substrates must be saturated thoroughly, but without standing water. MIXING Mix 3.2-4.4 liters of clean water with 25kg bag of ITLS CA-007H together. To add water based on the condition of stirring and keep stirring around 5 minutes until grouting well. APPLICATIONS Pour ITLS CA-007H mortar after mixing into the reserved cavities and recesses use the stick or bar to remove the air bubble, ensure that air entrapped into the grout is allowed to escape. Suggest to blend the grout by auto-mixer for better application. COVERAGE 25 Kg ITLS CA-007H when mixed with water will produce approx. 13.5 liters of Liquid Grouting Mortar. ITLS CA-007H suggest to be placed in thickness ranging from 10-15cm/layer.