Solderless Breadboard, Wishboard Wbu-5Xx Series

Features: (1) Delicate printed coordinates for easy recognition and calculation. (2) Board body made by advanced POM material to avoid static electricity and frequency interference. (3) It accommodates all sizes of DIP IC and discrete components with diameters 0.65±0.1m/m, interconnect wires 20-28AWG(ø0.3-ø0.8mm). (4) Spring contact uses phosphor bronze/nickel-plated with highly elasticity and good conductive, can stand operation more than 10, 000 times. (5) Max. allowable voltage/current:48Volts/5Amps. (6) WBU-2xx Series is a valuable tool.No signal interference caused screen white dot. Suitable to design high level prototypes whether in R&D application or university laboratories.

Features: (1) Coordinates molded in convex character. The operator can recognize and calculate easily. (2) Board body made by advanced POM material preclude static electricity and frequency interference. (3) Square insertion hole design with straight arrangement. The insertion hole is hardly deformed when sustaining continuous Insert and pull out. (4) Spring contact uses phosphor bronze/nickel-plated with highly elasticity and good conductive ensuring reliable connections, it can stand operation more than 10, 000 times. (5) Durable aluminum base plate treated with a special coating to avoid static electricity. (6) It accommodates all sizes of DIP IC and discrete components with diameters 0.65±0.1m/m, interconnect wires 20-28AWG(ø0.3-ø0.8mm). (7) Allowed more application of DIP IC pins insertion. The pin of DIP chips can be crossed without interfere with each other when proceeding test. (8) Max. allowable voltage/current:48Volts/5Amps. (9) Reliableconnection of Mini Self-Adhesive Round hole Breadboard ensure trustworthy of test and building small electronics design project. Multipack includes the basic needs and can be transferred to a circuit board quickly and easily. Trade Term & Delivery?: (1)Quotes are based on F.O.B Taiwan port US$. (2)Payment term: T/T in advance. (3)Delivery: within 2~3 weeks after receipt of T/T(wire transfer). --- O.E.M./O.D.M orders are welcome --- ALL THE WISH PRODUCTS ARE 100% MADE IN TAIWAN. **REGISTERED TRADEMARKS ** PLEASE PURCHASE GENUINE PRODUCT. COUNTERFEITING NOT ALLOWED.

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

Nominal system voltage Rated current Rated power Rated reactance Rated reactance rate Mode of installation(horizontal or stacked) Working environment(indoors or outdoors) Angle between inlet and outlet

Alstom Gbcdg11af8101kch Idmt O/c Relay, Bss Curve,ac Series Trip Technical Specification Model No. Cdg11af8101kch Application O/c Burden / D.m.t 3va / 3 Secs. C.t. Secondary 5 Amp C.t. Case Size 1d V 10t Contacts (S/r or H/r) 2 N/o 2 N/c H/r E/f or U/v Setting Not Aplicable Flag Yes Frequency 50 Hz Mounting Flush O/c or O/v Setting 2.5 - 10 Amps. Name Plate-1 Rfg9126674 Outline Drawing Mfj012 Wiring Diagram Madz821-17

ALSTOM GBCDG11AF8104KCH INV.TIME O/C OR E/F RELAY FOR AC SERIES Technical Specifications Model No : CDG11AF8104K(M) CDG11 S/T APPLICATION - E/F BURDEN / D.M.T - 3 VA / 3 SECS. C.T. SECONDARY - 5 AMP C.T. CASE SIZE - 1D V 10T CONTACTS (S/R OR H/R) - 2 N/O 2 N/C H/R E/F OR U/V SETTING - 0.5 - 2 Amps. FLAG - YES FREQUENCY - 50 HZ MOUNTING - FLUSH O/C OR O/V SETTING - NOT APPLICABLE Name Plate RFG9126695 Outline Diagram MFJ012 Wiring Diagram MADZ821-17

Digital Trainer is intended for elementary as well as advance training of Digital electronics and for bread board digital circuits, AND, OR, NOT, NAND, NOR, XOR, Three State Buffer, RS Latch, JK Flip Flop, Monostable Multibrator. and UP/ DOWN Counter. Practical experience on this board carries great educative value for R & D labs, Science and Engineering Students. Specifications: 01. Breadboard : Solderless Bread board with 1680 inter connected Tie Points 02. Pulse Switches : 2 No?s. Bounce free push buttons 03. Logic Switches : 8 logic level Switches in Dip type . 04. Power Supply : Fixed: +5V at 750 mA 5. Power Sockets : Logic Probe Power Supply Sockets 06. Logic Input : 8 LED buffered logic level indicators 07. Variable Clock : Fine adjustment of clock frequency. Clock range selection L : 10 ? 40 Hz, H : 1K ? 20K Hz. 08. Jacks : 2mm to BNC Socket 2 No. 2mm to 4mm Socket 2 No.

Supplier: Dry type air core series reactor, dry type air core current limiting reactor, dry type air core filter reactor, dry type air core shunt reactor, dry type air core smoothing reactor