Panel furniture, disposal plastic spoon & folk, white painted kitchen door.Manufacturer and exporter
Chemical formula: CH3C6H4SO3H - H2O CAS No.: 6192-52-5 Synonym: 4-Methylbenzenesulfonic acid, p-Toluene Sulfonic acid, Tosic acid, Tosylic acid, PTSA etc. Appearance: White crystalline powder Grade-A: purity 98% Free sulfuric acid 0.3% Max. Grade-B: purity 97% Free sulfuric acid 0.5% Max. Grade-C: purity 96% Free sulfuric acid 1% Max. Grade-D: purity 95% Free sulfuric acid 3% Max. Packing: 1. 25 kg paper bag with inner PE bag 2. 300 kg jumbo bag 3. 500 kg jumbo bag Product origin: Taiwan Application: PTSA is widely used as a catalyst and an intermediate in various applications: 1. As a catalyst in the synthesis of pharmaceuticals, manufacturing of plasticizers, paint & coating industry, cross linking reactions, curing agent, organic synthesis, esterification, condensation, polymerization, alkylation etc. 2. As an intermediate in the manufacturing of fine chemicals, dyestuffs & pigments. 3. As a curing agent in thermosetting resin systems, acrylic resins, foundry resins (sand casting).
Description CP-358 Multi-purposes Paint is based on specific polymer resin and a variety of materials with water resistance ,abrasion resistance, weather resistance characters. This refined dry fast paint can be used in cement ,metal ,wood ,asphalt surface to meet your particular requirement and very economy. Owing to excellent materials , strict QC and production process , Carmine Paint can offer the advantages of time- saving , easy usage . Application * used in multi-kind materials, such as metal, wood, cement and asphalt. * Indoor, outdoor paint. * Line Marking. Characteristics Durable hard and tough film. Excellent adhesion. Excellent abrasion and corrosion resistance. Package 25KG / Iron durm Color : white / yellow / red / green Cover ability : 8 ~ 10 m�²
Description CC-610N is a 2k topcoat which cured by non-yellowing isocyanate. Feature â?¦ Solvent-free, friendly to human. â?¦ Compression and impact resistant. â?¦ Chemical resistant as its special structure. â?¦ Suitable for critical area (0~80â??). â?¦ Suitable for food factory, freezer, medicine plant, chemical plant, laboratory..etc Usage Used as a topcoat on surface of concrete and metal, bridges and steel structures. Package 5 gal per set
CP-358 Multi-purposes Paint is based on specific polymer resin and a variety of materials with water resistance ,abrasion resistance, weather resistance characters. This refined dry fast paint can be used in cement ,metal ,wood ,asphalt surface to meet your particular requirement and very economy. Owing to excellent materials , strict QC and production process , Carmine Paint can offer the advantages of time- saving , easy usage . * Durable hard and tough film. * Excellent adhesion. * Excellent abrasion and corrosion resistance. * used in multi-kind materials, such as metal, wood, cement and asphalt. * Indoor, outdoor paint. * Line Marking.
Description CC-020 is a new type cement based compound coating with various texture of finishes and shades. By apply with different tools and methods, it can provide either natural or rough texture, depending on the requirements. Use & Feature 1. Suitable for interior and exterior decorative applications. 2. An economical alternative to textured elastomeric coatings. 3. High water-resistance with handy-usability. 4. The built-in texture helps to disguise rough and irregular surfaces. 5. Can be used as primer with water-diluted CC-020. Tool Spray guns, trowels, spatulas, pattern-rollers
Material: Stoneware Reactive Color Glaze with Hand Painting Color: as shown in the photos ** Please contact us for all specifications
Fondaparinux Sodium USP / intermediates ( N-4, N-3), Ropivacaine HCl (USDMF No. 20249 US-FDA Approval), Propofol ( API and technology transfer) China GMP, Droperidol China GMP, Nicorandil China GMP, Doxapram HCl China GMP, Diatrizoic Acid China GMP, Meglumine China GMP, Formulations/China, Injections:, Fondarinux sodium injection 2.5 mg/0.5 ml, PFS, Propofol injections 1%, 2% 10, 20, 50 ml, Ropivacaine Mesylate Injection, Sodium hyaluronate injection, Calcium Gluconate Injections, MCT/LCT Fat emulsion injection, Doxapram HCL injection, Diatrizoate Meglumine and Diatrizoate sodium injection, Tablets and capsules:, 1. Nicorandil Tablets, 5 mg, 2. Amlopdipine besylate tablets, 5 mg, 3. Fenofibrate micronized Capsules, 4. Lecitin-bound iodine capsules, Non alcohol hand sanitizer US FDA.
Epoxy is substituted by DURAFLEX which has been launched and had excellent feedback from our customers. It's the environmental friendly, non-toxic paint which apply in multiple layers with smooth surfaces. Used as waterproofing coating and burnish surface coating in wet and fouling protection areas.
DESCRIPTION CP-311T elastic polyester is a new type product with a special polymerization. It is a one compound high-performance elastic waterproof membrane. The single-liquid self-crosslinking waterproof polymer with anti-fouling and wear-resisting properties is used for the coating and protection of elastic waterproof materials, roofing, wall and other elastic materials. This product has high adhesion, elasticity, wear resistance and protection. It is water-resistant, weather-resistant and hydrophobic. It is the best choice for long-term protection. SPECIFICATIONS 1. AppearanceWhite Emulsion 2. Solid Content48~52 % 3. Viscosity3000 ~ 6000 cps(RVT#3@25) 4. Proportion1.15~1.25 PROPERTIES Developed with an environmentally friendly formulation that is water-based, non-toxic and low-odor, in line with environmentally friendly low VOC regulations and CNS waterproofing specifications. The self-crosslinking single-liquid resin can make the construction work simple, and can be directly sprayed, rolled or brushed. Suitable for indoor, outdoor, floor and wall applications with high toughness, water resistance and wear resistance Excellent film properties: elastic value and stretchability, and excellent wear resistance Weathering, aging resistance, can effectively increase the life of the paint Excellent adhesion, breathability and foam resistance, which can effectively prevent surface blistering and false after application.
Silicone adhesive sealant, construction joint sealant, gap filler, waterproofing emulsion, polyurethane based topcoat, Self Adhesive Bandage Wrap Elastic Wrap.
DEACRIPTION Rockflex-BRH is a specially modified styrene butadiene rubber emulsion with widely applicable for use in repair and general purpose mortars and overlay applications. Also, it is likely to be applicable to floors, bridge deck, surfacing and compounds for repairs, road of concrete structures. CHARATERISTICS * Increase the performance of bonding agent for old and new concrete. * Improving tensile and flexural properties of repair mortar. * Reduces water penetration and shrinkage. * Repair damaged, sprawled concrete and filling of cracks. * Better abrasion resistance and chemical resistance of cement screeds. * Suitable for waterproofing and laying floor screeds. * Strength to adhere concrete, masonry surfaces. APPLICATION PROCEDURE * Substrate should be cleaned and free of dust. Use wire brush to remove loose material. * Clean surface with water to remove loose particles and dust before primer application. PRIMER COAT Apply directly or mix cement and Rockflex-BRH in the ratio of 2:1. Apply as a slurry coat before placing polymer modified primer application.
DESCRIPTION ITLS PMS 60 is a single component elastomeric sealant without isocyanates. It cures rapidly under the effect of atmospheric humidity to form a flexible and resistant joint with very good adhesion on most materials. APPLICATION ITLS PMS 60 is suitable for industrial and refrigerated trailers, truck bodies, shipbuilding, air conditioning and ventilation units, sandwich panels and other industrial applications. ITLS PMS 60 can also be used for bonding and caulking different materials used in the building industry : concrete, wood, aluminum, most lacquered metals, polyester, glass, stone, ceramic, and so on. However, for difficult materials especially lacquered or non-ferrous metals, it is necessary to make tests beforehand. INSTRUCTIONS FOR USE SUBSTRATE PREPARATION: The substrates must be clean, even, dry, free of dust, oil, grease and any contaminants that could harm bonding. All traces of poorly adherent paints or coatings should be systematically removed beforehand. They may be cleaned with PMS primer, methylethylketone (MEK) or acetone. Check the compatibility of the solvent used with the substrates. It may be necessary to rub down the substrate beforehand. After rubbing down, the surface should be recleaned. Allow the substrate to dry after degreasing. When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer. CAULKING: ITLS PMS 60 can be applied by a manual or pneumatic gun. After application, use a putty knife to smooth the joint with soapy water. Do not apply at a temperature under 5 C. In cold weather, store the cartridges at about 20 �°C before use. This product should be used within 24 hours of opening the cartridge protection; otherwise, the sealant could harden inside. Avoid any contact with non-cured polyurethanes during curing. CLEANING: Tools can be cleaned with PMS primer, MEK or acetone before the sealant has completely cured. After curing, abrasion is necessary. STORAGE AND SHELF LIFE 12 months in the original, hermetically sealed packagings between 5 and 25 C PACKAGING 290 mL cartridges and 600 ml sausages SAFETY Not classified as hazardous. Read the material safety data sheet before use.
PS-SAFE23 has unique feature as it can stick the styrofoam material. It does not contain toluene and formaldehyde that contribute to smog in cities and industrial area. This is the only contact adhesives with 36.5% solid. It's cost effective with the highest active ingredients. PS-SAFE23 is made of tough elastomeric rubber, tackifying resins and solvent with least odor without toluene . Unique feature as it can adhere the styrofoam material Strong grab on contact with higher green strength Excellent water resistance as it immersed in water for 3 months without adhesion failure. Very Low odor without toluene and MEK
CC-403 Epilox Epoxy Binder is a two part solvent free epoxy resin binder system for combining with selected fillers and aggregate to produce epoxy mortars of various consistencies. Ideal for : bonding, sealing, priming, coating and grouting. May be used on vertical or horizontal applications as structural epoxy adhesive paste and filler. CC-403 is also used as a primer for Epilox floor coatings and toppings as well as Epilox mortars. FEATURES AND BENEFITS 100% solids epoxy Solvent free Low VOC High tensile and compressive strength Bonds to damp concrete High mechanical strength Excellent adhesion to most substrates Cures at temperature down to 5Ã??C High chemical resistance Unfilled system Allows for mortars and grouts to be mixed to any desirable consistency Typically 3-4 times stronger than typical concrete Complies with AS4020 potable water Australian Made Convenient mix ratio- ( 2 parts Resin- 1 part Hardener ).
Description CS-264 is the latest innovative Contact adhesive using our home-grown technology. This is the only Contact adhesives with 50% solid. It's cost effective with the highest active ingredients. Less solvent less health hazard. CS-264 is made of tough elastomeric rubber, tackifying resins and solvent with least odour without toluene. Features Faster sticking Contact Adhesive within 5 minute. Strong grab on contact with higher green strength. Paintable when dried. Easy to extrude even at -15 C , most suitable for all season. Very Low odour without toluene.
Descriptiion CS-500 is a sealant mainly made by specialized rubber polymer, compatible with surface of various materials. Especially suitable for architectural expansion joint and crack repairing applications. Use 1.Used for sealing joints in applications such as curtainwall joints, metal panel joining,bedding thresholds,secondary glazing seals. 2.Standing seam roofs, side walls, gutters and downspouts sealing. 3.Filling and caulking joints in heating and air conditioning ducts. 4.Joint sealing in sheet metal. Feature 1.Excellent thixotropy,non-sagging during vertical application. 2.Good durability and flexibility. 3.Compatible with various kinds of paint. Color grey Packaging 300ml cartridge
Description PU-850 is a one component, thixotropic, polyurethane waterproofing membrane where viscosity of the liquid is paramount. In applications such as sloped roofing, flashing details and under tile waterproofing PU 850 cures to form a durable yet elastic membrane with strong adhesion to many types of substrates. PU 850 is fast curing, and is tack-free in less than two hours, with exceptional elasticity. Due to it thixotropic, hydrophobic and elastomeric nature, PU 850 is the perfect solution to provide excellent waterproofing on vertical and sloped surfaces without running. Use - Shower Recesses - Bathrooms - Laundries - Kitchens - Balconies - Retaining Walls - Planter boxes - Steel (suitably primed) - Patios - Plasterboard - Courtyard Areas - Brick - Concrete, Cement render, plaster - Wet area wall lining board - Hardie/CSR sheet flooring - Light weight aggregate block Feature â?¢ Easily applied onto vertical and sloped surfaces with no running OR bubbling. â?¢ Excellent adhesion to most substrates. â?¢ No thinning required. â?¢ Excellent thermal resistance, never turning soft. â?¢ Excellent cold resistance, remaining elastic to -40â?°c â?¢ No accumulation of humidity under coating â?¢ Excellent mechanical properties â?¢ Highly stable, will not bleed through porous materials â?¢ Bitumen free â?¢ Highly elastic and stable. Packaging 15 Litre pail Consumption 1.2~1.5kg/m�² Shelf Life Unopened pails can be stored for up to 12 months in a cool, dry and weatherproof environment.
DESCRIPTION CC-301(54) is 1 K aromatic moisture curing PU adhesives, it can be used as a waterproof primer for cement. CC-301(54) has excellent bonding strength, weather resistance, hydrolysis resistance after fully curing. (about 3 days. ) TECHNICAL DATA Appearance : light yellow transparent liquid Component PU : pre-polymer Viscosity : 700-900 cps Solid Content : 100% Shelf Time : 6 months OPERATION 1. Put CC 301(54) onto the cement, then used a roller to coat on the cement. 2. After first coating has already tack free (about 1 hour), the second coating can be applied immediately. 3. After fully curing ( a bout 8 24 hours), the top coating can be applied.
Description CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology. Features Paintable easily with wb coating Easy to use Smooth to tool with trowel Non-sagging Stronger adhesion High solid by volume; 100% water resistant when cured. Low odor VOC free / Solvent free Uses Gypsum boardCalcium silicate board Fiber cement board Plywood / Timber Concrete / Tile It may be suitable to use on other substrates not mentioned above. Application 1. The surface to be adhered must be free of dust, release agent, oil and grease 2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as indicated by uniform color. 3. Do not stir or mix the two parts on the application surface.
