DESCRIPTION
ITLS PMS 60 is a single component elastomeric sealant without isocyanates.
It cures rapidly under the effect of atmospheric humidity to form a flexible and resistant joint with very good adhesion on most materials.
APPLICATION
ITLS PMS 60 is suitable for industrial and refrigerated trailers, truck bodies, shipbuilding, air conditioning and ventilation units, sandwich panels and other industrial applications.
ITLS PMS 60 can also be used for bonding and caulking different materials used in the building industry : concrete, wood, aluminum, most lacquered metals, polyester, glass, stone, ceramic, and so on. However, for difficult materials especially lacquered or non-ferrous metals, it is necessary to make tests beforehand.
INSTRUCTIONS FOR USE
SUBSTRATE PREPARATION:
The substrates must be clean, even, dry, free of dust, oil, grease and any contaminants that could harm bonding. All traces of poorly adherent paints or coatings should be systematically removed beforehand.
They may be cleaned with PMS primer, methylethylketone (MEK) or acetone. Check the compatibility of the solvent used with the substrates.
It may be necessary to rub down the substrate beforehand. After rubbing down, the surface should be recleaned. Allow the substrate to dry after degreasing.
When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer.
CAULKING:
ITLS PMS 60 can be applied by a manual or pneumatic gun. After application, use a putty knife to smooth the joint with soapy water. Do not apply at a temperature under 5 C. In cold weather, store the cartridges at about 20 �°C before use. This product should be used within 24 hours of opening the cartridge protection; otherwise, the sealant could harden inside. Avoid any contact with non-cured polyurethanes during curing.
CLEANING:
Tools can be cleaned with PMS primer, MEK or acetone before the sealant has completely cured. After curing, abrasion is necessary.
STORAGE AND SHELF LIFE
12 months in the original, hermetically sealed packagings between 5 and 25 C
PACKAGING
290 mL cartridges and 600 ml sausages
SAFETY
Not classified as hazardous. Read the material safety data sheet before use.
