Description
CS-264 is the latest innovative Contact adhesive using our home-grown technology.
This is the only Contact adhesives with 50% solid. It's cost effective with the highest active
ingredients. Less solvent less health hazard.
CS-264 is made of tough elastomeric rubber, tackifying resins and solvent with least odour without toluene.
Features
Faster sticking Contact Adhesive within 5 minute.
Strong grab on contact with higher green strength.
Paintable when dried.
Easy to extrude even at -15 C , most suitable for all season.
Very Low odour without toluene.
Mxbon Ca Adhesive 12 pieces per sheet
Description CS-261 is a acrylic sensitive adhesives. It has good initial tack, suitable for the adhesion of PVC tile. It is easy to use. Application CS-261 can be used in decoration, PP to paper,PVC to non-woven fabrics industry.
APPLICATIONS & CHARACTERISTICS 1. High bonding strength and easy to brush. 2. It can be applied for many materials, such as wood, PU leather, sponge and cloth etc. 3. Water based, green product. PHYSICAL PROPERTIES : 1. AppearanceBeige liquid 2. Main ComponentWater-based neoprene. 3. Solid Content 52± 2% 4. Viscosity 4500 5500 cps (25, LVT) 5. Shelf Life 6 months
Description CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology. Features Paintable easily with wb coating Easy to use Smooth to tool with trowel Non-sagging Stronger adhesion High solid by volume; 100% water resistant when cured. Low odor VOC free / Solvent free Uses Gypsum boardCalcium silicate board Fiber cement board Plywood / Timber Concrete / Tile It may be suitable to use on other substrates not mentioned above. Application 1. The surface to be adhered must be free of dust, release agent, oil and grease 2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as indicated by uniform color. 3. Do not stir or mix the two parts on the application surface.
A multipurpose premium grade adhesive specially used for heavy duty bonding & required high strength. It forms strong permanent contact bonds. Adhesive can be used where very less pressure is required for bonding. It is specially used for Furniture work mostly sun mica, plywood & partical board etc.PVC sheet, PU foam, leather cloth, leather, polyester glass fibers, hard board, chip board, wood, painted metal, automotive & coach building ,roof head lining.
The multipurpose high polymer modified thin-set adhesive offering vast application for interior & exterior areas . It is comentitious power to be mix only with water to install various types of medium & large format tiles & stone on variety of substrates using thin-set compliance.
Features 1.Low VOC meets US CARB standard 2.Aggressive tack multipurpose neoprene adhesive; 3.Anti-heat & anti-aging; 4.Adjustable spray pattern, easy operation. Applications Sprayidea 30 LowVOCHi-StrengthSprayAdhesive can be used forlaminates, plastics, most rubber and supported vinyl, leather, wood. It is also plasticizer resistant and heat resistant, suitable for automotive headliner and other general industrial applications.
Supplier: Sealants and adhesives, polysulphide sealant (gun grade)/(pouring grade), general purpose rubber sealant, urja food graded duct sealant, nexo seal weatherproof 789 silicone sealant (std. / premium grade), p u sealant, fire stop sealant, water base duct sealant, clean room sealant, non drying pest, clean cloth. (tag rag) microfiber clean cloth, acrylic sealant, under body coating, water base/bitumen base, ms 99 ( metal to metal ), high temperature sealant, low temperature sealant, sol sealer, n.c. thinner, peelable coating, nexo seal multipurpose rtv silicone sealant, heat reflective paint, masking tapes
Services: Manufacturer
Paver lacquer is applied on the surface of pavers to impart a decorative finish and colourful look. This is a high gloss, best quality lacquer coating which provides more coverage area and gives more shine to the surface of pavers. It can be applied on cement concrete block, paver block, decorative tiles and like items. Easy To Use : Forms a hard transparent film over the surface applied. Provides high glossy finish with shine and scratch resistance. Excellent water , dust, alkali and abrasion resistance. Has strong bonding property. Exceptionally high coverage area. Available in packing of 20, 50 ,200 ltrs.
