British Wood Free Coated Paper Suppliers and Manufacturers

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

Detail of Double A Copy Paper A4 80GSM 102-104%: - Brand: Double A (Original) - Size: A4 (210mm x 297mm) - Substance: 80gsm - Brightness: 102-104% above - Color: white - Whiteness: CIE167 - Grade: All purpose Premium Paper - Sheet in Ream: 500 - Roughness: 140ml/Min - Roughness: 140ml/Min - Thickness: 110um - Opacity: 95% - Ream box: 5 Ream - Quality: Very High

Detail of Double A Copy Paper A4 80GSM 102-104%: - Brand: Double A (Original) - Size: A4 (210mm x 297mm) - Substance: 80gsm - Brightness: 102-104% above - Color: white - Whiteness: CIE167 - Grade: All purpose Premium Paper - Sheet in Ream: 500 - Roughness: 140ml/Min - Roughness: 140ml/Min - Thickness: 110um - Opacity: 95% - Ream box: 5 Ream - Quality: Very High

Thermal printer paper, often referred to as thermal paper or receipt paper, is a type of paper designed for use in thermal printers. It is coated with a special chemical that reacts to heat, allowing the printer to create images or text without the need for ink or toner. When the thermal print head in the printer applies heat to the paper, it darkens the coated areas, producing the printed content. Thermal printer paper is commonly used for printing receipts, tickets, labels, and other documents in various industries, including retail, hospitality, healthcare, and logistics. It is valued for its speed, accuracy, and cost-effectiveness in producing clear and durable prints, although it can be sensitive to heat and light exposure, which can cause fading over time.

A4 copy paper, also known as double A paper, is a widely used type of paper known for its high-quality and versatile nature. With its standard dimensions of 210 x 297 millimeters, it is a preferred choice for printing documents, reports, presentations, and other professional materials. Double A A4 copy paper is renowned for its smooth texture, optimal thickness, and consistent performance in various printing devices, making it suitable for both home and office use. Its exceptional brightness and whiteness enhance the readability of printed content, while its durability ensures minimal paper jams and crisp printouts. Whether for everyday printing needs or important presentations, double A A4 copy paper stands out as a reliable and effective paper option.

Tissue paper is a lightweight and soft paper product typically used for various purposes, including hygiene, cleaning, and wrapping. It is characterized by its thin and delicate texture, making it ideal for gentle wiping and cleaning tasks. Tissue paper is commonly found in bathrooms for personal hygiene, as facial tissue, or toilet tissue, as well as in the form of paper towels for kitchen use. It is also employed for gift wrapping and crafting due to its decorative and easy-to-fold nature. Tissue paper comes in various colors and designs, serving both functional and aesthetic purposes in households, businesses, and artistic projects.