Find Verified Wind Turbine 2Kw Suppliers, Manufacturers and Wholesalers

Product information
Model: hummer wind turbine 2kw
H-3.8-2kw wind turbine which features high efficiency and low rated wind speed introducing several patented technologies and some special materials.
Application
Well used in:
Housing
Telecommunications station
Tv transfer station
Monitoring station (military, hydrology, observatory)
Water-pumping station
Technical parameter
Rated power(w) 2000
Maximum output power (w) 3200
Charging voltage (v) dc 120v
Blade quantity 3
Rotor blade material grp
Rotor blade diameter(m) 3.8
Start-up wind speed (m/s) 3.0
Rated wind speed (m/s) 9.0
Rated rotating rate (r/min) 450
Wind energy utilizing ratio (cp) 0.45
Generator output single-phase
Frequency conversion ac
Rated charging current (a) 15
The maximum charging current (in a short time )(a) 28
Output ac frequency (hz) 0-370
Generator efficiency >0.8
Tower diameter(mm)114*2000*5
Tower height(m) 10
The weight of generator(kg) 25
Battery 12v 150ah/200ah 10pcs



Plywood container.

Model: Fzy2kw,
Rotor diameter: 3.2m,
Blades quantity: 3 pcs,
Blades material: Frp (fiber reinforce plastic),
Rated speed: 320r/min,
Rated output power: 2kw,
Max output power: 3kw,
Output voltage: dc48v 72v 96v /ac220v,
Start wind speed: 2.5m/s,
Rated wind speed: 9m/s,
Working wind speed: 3-25m/s,
Security wind speed: 40m/s,
Speed regulation: Yaw&magnetic resistance,
Charge control: Aic(automatic intelligent control),
Wind turbine type: pmg (permanent magnet generator),
Working temperature: from -40 to +60,
Annual average energy production: 5000kwh,
Recommended accumulators: 12v200ah6pcs( 1200ah ),
Accumulators full charge time: about 8 hours,
Tower type: pull wire tubular tower or cone tower,
Tower height: 6m (optional),
Weight: 80kgs (without tower),
Can supply power for: air-condition refrigerator water pump electric cooker tv washer illumine fanner charge,

Plywood box

Model: ZH2KW
Rated Power: 2000 Watts
Maximum Power: ~ 2500 Watts
Type: 3 Blade Upwind
Rotor Diameter: 3.6 m (12 ft.)
Start-up Wind Speed: 2.5 m/s(5.6 mph)
Cut-in Wind Speed: 3m/s (6.7mph)
Rated Wind Speed: 10 m/s(22mph)
Cut-Out Wind Speed: None
Furling Wind Speed: 18 m/s (40mph)
Max. Design Wind Speed: 50 m/s (112mph)
Blade Pitch Control: None, Fixed Pitch
Over speed Protection: Auto Furl
Gearbox: None, Direct Drive
Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F)
Generator: Permanent Magnet Alternator
Output Form: 48 VDC Nominal .

Blade diameter 2.5m
Rated Rotated speed 50
Rated wind speed 10m/s
Rated power 2000W
Max voltage 3000w
Output voltage 96v/48v
Start up wind speed 2.5(m/s)
Operating wind speed 3-30(m/s)
Security wind speed 50(m/s)
Height of tower 8m
Weight of top section 232/252kg
Output controller system charger and inverter
Capacity and quantity of battery(reference) 12V100AH 8pcs
can supply power for ice box, washer, water pump, tv, lighting, electric fan, charger.


Wooden case packing.

Rotor diameter:
3.5m
Blades quantity:
3pcs
Direction:
always upwind
Blades material:
Glass fiber reinforced plastic
Rated output power:
2000W
Maximum output power:
2950W
working voltage:
DC24/36/48/96/120/240V,AC220V
Annual average energy production:
4672KWH (in rate 5m/s wind speed)
working wind speed:
3-25m/s
Initial wind speed:
2.5m/s
Nominal wind speed:
8.0m/s17.8mph
Storm-stand:
up to 50m/s
Max rotate speed:
400r/min
Wind turbine type:
Three-phase, PMG Alternator
Working temperature:
from -40 to +60 C
Blade Pitch Control
Fixed Pitch-
Over Speed Protection
Auto-furl
Speed regulation methods:
Yawing and electrical magnet switch
Stop Methods
Manual Brake + Hydraulic Brake
Gearbox:
None, Direct Drive
Batttery full charge time:
about 8 hours

Main market:
North america, south america, europe, africa, mid , eastern asia, ect .
Note:
1. Tower type and tower height can be changed as per your request
2. Working voltage can be specially designed according to your request
3. For the power curve and detail, please feel free to contact us.


Plywood cases or according to your need

Model: ZH2KW
Rated Power: 2000 Watts
Maximum Power: ~ 2500 Watts
Type: 3 Blade Upwind
Rotor Diameter: 3.6 m (12 ft.)
Start-up Wind Speed: 2.5 m/s(5.6 mph)
Cut-in Wind Speed: 3m/s (6.7mph)
Rated Wind Speed: 10 m/s(22mph)
Cut-Out Wind Speed: None
Furling Wind Speed: 18 m/s (40mph)
Max. Design Wind Speed: 50 m/s (112mph)
Blade Pitch Control: None, Fixed Pitch
Over speed Protection: Auto Furl
Gearbox: None, Direct Drive
Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F)
Generator: Permanent Magnet Alternator
Output Form: 48 VDC Nominal .

Wooden case.

1.Magnetic saturation generator design, 20years designed life.
2.2-2.5m/s start-up wind speed under low torque start-up technique.
3.Independent power supply
4.Blades are casted into molding at one time with balance up to 99%.
5.Bearings import from japan (nsk), long service time (5 years maintenance-free).
6.Low cost and low noise
7.Low cut in wind speed (3m/s) to guarantee the maximum generation at low wind speed.


One pc in one plywood

Rated votage¡êo48v
Working wind speed: 1.8-25m/s
Survival max wind speed¡êo40m/s
Working temp.: -30¡«50¡æ

As buyer's request

FDV-1KW Technical Parameter:
Power : 1KW
Blade Height: 1.8m
Material of the blades : Fiber glass-reinforced plastic
Rated Wind Speed: 10m/s
Cut-in Speed: 3m/s
Cut-out Speed: 25m/s
Security Wind Speed: 40m/s
Output Voltage: 48v
Working Temperature : -40--+40
Height of Guy Cable Tower: 6m
Top Quality Except Tower: 120kg
Generator Style: 3-phase AC PM
Output Controller System: Controller , Inverter
Suggested Batteries and its Capacity: 4PCS 12V100AH
Can Supply Power for: Washing machine,Color TV, Lighter, Fanner, Charger
1KW OFF GRID QUOTATION.

CONTROLLER & INVERTER:
Model: WWS10A-48-B
Rated Wind Turbine Power: 1kW
Rated Solar Power: 300W
Rated Battery Voltage: 48V
Wind Turbine Maximum Input Current: 40A
Wind Turbine Maximum Input Power: 2kW
Unload Voltage factory default : 56V
Unload Current factory default : 25A
Control Mode: PWM
Display Mode: LCD
Display Parameters: Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current,
PV Voltage, PV Charge Current, PV Power, Battery Voltage.
Working Temperature & Humidity: -20~+50/35~85%RH Without Condensation
Temperature Compensation optional : 4mV//2V ,¨C35--+80 , Precision 1
Communication Mode optional : RS232, RS485, RJ45, GPRS. Etc
Protection Function: Solar reverse charge protection , Solar reverse connection protection,
Battery over charge protection ,Battery reverse connection protection,
Lightning protection, Wind turbine current limiting,
Wind turbine automatic brake and manual brake.

Model: WI10-48-S
Rated Output Capacity : 1kVA
Rated Battery Voltage : 48 VDC
Over Voltage Shutoff: 68VDC
Over Voltage Recovery: 66VDC
Under Voltage Shutoff: 42VDC
Under Voltage Recovery: 48VDC
No Load Loss: 0.35 A
Output Wave Form: Pure Sine Wave
Display Mode: LCD
Display Parameters: Battery Voltage, Status parameters
Cooling Mode: Fan
Rated Output Voltage: 110/120/220/230/240VAC
Wave Distortion: 4
Output Frequency: 50/60 Hz¡À0.05Hz
Dynamic Response: 5%
Overload Capacity: 120% 1min,150% 10s
Inverter Efficiency: Maximum 90%
Noise 1m : 40dB
Insulating Strength: 1500VAC,1min
Protection Function: Battery over voltage protection, Battery under voltage protection,
Battery reverse connection protection, Output overload protection,
Output short circuit protection, Overheating protection.
Working Ambient Temperature: -20¡«50
Working Altitude: 4000m
Working Ambient Humidity: 0~90%,no condensing.


In plywood.

FD3.0-1KW Technical Parameter
Power : 1KW
Blade Diameter: 3.0m
Rated Rotor Speed: 400r/min
Rated Speed: 8m/s
Rated Power: 1KW
Max Power: 1.5kw
Output Voltage: DC48V
Start Up Wind Speed: 3(m/s)
Work Speed: 3-25(m/s)
Security Wind Speed: 40(m/s)
Height of Guy Cable Tower: 6(m)
Top Quality Except Tower: 76kg
Output Controller System: Controller , Inverter
Suggested Batteries and its Capacity: 4PCS 12V150AH

Can Supply Power for: Washing machine,Color TV, Lighter, Fanner, Charger
FD3.0-1 KW Off Grid QUOTATION

Controller & inverter:
Model: WWS10A-48-B
Rated Wind Turbine Power: 1kW
Rated Solar Power: 300W
Rated Battery Voltage: 48V
Wind Turbine Maximum Input Current: 40A
Wind Turbine Maximum Input Power: 2kW
Unload Voltage factory default: 56V
Unload Current factory default: 25A
Control Mode: PWM
Display Mode: LCD
Display Parameters: Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current,
PV Voltage, PV Charge Current, PV Power, Battery Voltage.
Working Temperature & Humidity: -20~+50/35~85%RH Without Condensation
Temperature Compensation optional: 4mV//2V ,¨C35--+80 , Precision 1
Communication Mode optional: RS232, RS485, RJ45, GPRS. Etc
Protection Function: Solar reverse charge protection , Solar reverse connection protection,
Battery over charge protection ,Battery reverse connection protection,
Lightning protection, Wind turbine current limiting,
Wind turbine automatic brake and manual brake.

Model: WI10-48-S
Rated Output Capacity : 1kVA
Rated Battery Voltage : 48 VDC
Over Voltage Shutoff: 68VDC
Over Voltage Recovery: 66VDC
Under Voltage Shutoff: 42VDC
Under Voltage Recovery: 48VDC
No Load Loss: 0.35 A
Output Wave Form: Pure Sine Wave
Display Mode: LCD
Display Parameters: Battery Voltage, Status parameters
Cooling Mode: Fan
Rated Output Voltage: 110/120/220/230/240VAC
Wave Distortion: 4
Output Frequency: 50/60 Hz 0.05Hz
Dynamic Response: 5%
Overload Capacity: 120% 1min,150% 10s
Inverter Efficiency: Maximum 90%
Noise 1m: 40dB
Insulating Strength: 1500VAC,1min
Protection Function: Battery over voltage protection, Battery under voltage protection,
Battery reverse connection protection, Output overload protection,
Output short circuit protection, Overheating protection.
Working Ambient Temperature: -20¡«50
Working Altitude: 4000m
Working Ambient Humidity: 0~90%,no condensing.


in plywood.

Rated power(w) 2000
Maximal power(w) 2450
Rated rotation(rmp) 350
Starting torque(n/m) 0.87
Reted speed(m/s) 3.6
Cut-in speed(m/s) 2.5
Normal working speed(m/s) 3-25
Shut down(m/s) 40
Normal output voltage(dc) 48
Optional output voltage(dc) 28-240
Optional minimum outpvoltage(dc) 28
Blade diameter(m) 3.5
Blade material enhanced frp
Number of baldes 3
The weight of the main power(kg) 80
The height of the tower(m) 6
The weight of the tower(kg) 57-70
Recommended battery capacity(ah*n) 12v*200ah*4


Export packing standards

MEGATRO is now offering different types of wind generators with competitive price, which including two types, vertical and horizontal type. It is used of wind energy in the wind farm, Energy Company and other fields.

MEGATRO wind-driven generator, is one kind of electro-mechanical device that can transformed wind energy into the mechanical energy, then again transforms them into the electrical energy. It uses the wind power, gathers them to the battery charging and saves the electrical energy. Besides, it also gather the electrical energy transformation and alternating current supply which voltage and hertz is 220V/50HZ ,110V/60HZ,230V/50HZ.

It has the advantages of no need the fuel and can't produce pollution and noises. And it has high efficiency and good low-speed, the speed regulating system adjusts automatically to wind speed, the whole system is easy to install and convenient to maintain.

It is generally suitable for the areas when the wind resources are rich. And it is widely used in the areas when the electricity is not sufficient or the electrical network is not normal. The main applied fields are as follows: air conditioning refrigerator, the washer, the illumination, the television, the searchlight, the communication equipments, the power tool and others.

Our wind generator' main parameters and sizes are as follows:
1 Machine Pattern: The horizontal (or vertical) axis approaches against the wind
2 Leaf Blade Pattern: Propeller
3 Leaf Blade Number: 3 pieces
4 Wind Wheel Diameter: 2.0 m, 2.5m, 2.6m, 2.8m, 3.2m, 4.0m, 5.0m, 7.0m, 8.0m, 12.0m.
5 Rated Speed: 160----400 revolutions/Minute,
6 Rated Power: 150W, 200W, 300W, 600W, 1000W, 1500W, 2000W, 3000W, 5000W, 10KW, 20KW, 30KW, 50KW
7 Working Voltages: 12V, 24V, 36V, 48V, 60V, 96V, 108V, 220V, 380V, 420V
8 Matches the accumulator cell: 480V,
9 Starting Wind Speed: 3.0 meters/ Second
10 Design Wind Speed: 8~ 9 meters/ Second
11 Operating Region: 3~20 rice/ Second
12 Hand of Rotation: Clockwise (face wind wheel)
13 The Wind cans the utilization factor: 0.4
14 High Speed Ratios: 6: 1 to 8: 1
15 Velocity Modulation Way: Leaning tail + electric brake
16 Sets Up an Altitude: 6-9meters
Place of Origin: Qingdao, Shandong, China.
Availability size: Based on the customer's requirements.
Fabrication: Based on the customer's requirements and other technical data agreed by both parties.
Package: packed with wooden case
Terms of Payment: L/C, T/T
Minimum Order Quantity: 1sets
Port of Loading: Qingdao Port
Delivery Time: one month or based on the customer's needs.

Export standard package or as per client

In turkey we are producing high quality wind turbines .Please ask for our catalogs for detailed information.


Tower type: composite coating over steel lattice
Tower weight :18t
Rotor blade type: horizontal axis, 3 blades

150w, 300w, 600w, 1kw, 2kw, 3kw, 5kw.10kw, 20kw, 30kw, 50kw, 100kw.

Power: 50W
Rotor diameter: 700mm
Height of blades: 600m
Material of blades: Glass Fiber Reinforced Plastic
Number of blades: 5
Rated rotor speed: 120r/min
Rated wind speed: 7-10m/s
Start-up wind speed: 1.3m/s
Work wind speed: 1.3-25m/s
Survival wind speed: 50m/s
Output voltage: AC12V
Packing size: 660, 350, 280mm
Weight: 15KG.

Totally two identical 145 kW wind turbine units, made in 1988 by Danish A/S Nortank, total operating hours approx 75000. The equipment have been dismatled since 2008 and inspected and serviced for operation condition and they are ready for immediate delivery

We have totally 2 units of uninstalled complete wind turbines manufactured by Danish A/S Nordtank in year 1988, manufactures type NTK 130 with rated power of 2 x 145 kW. The mills are in good operational condition and ready for immediate shipment. The hubs are heat treated MEEHANITE hubs made by company SABROE and are equipped with cast iron construction which allows adjustment for blade pitch angle. The blades are made by Danish company LM- Glasfiber, material is glass fiber reinforced polyester and they have self-supporting structure with bushing roots. The blades have also hydraulically activated tip brakes which automatically rotate the tips to a 90 degree break angle when wind is lost or it can be used for maintenance stoppage. The gear box in made by German Lohman & Stolterfoht and it is two step planetary gear type with high AGMA rating of 302 kW. The break system is 100% fail safe Nortank’s own hydraulically / mechanically activated brakes. Both units have they own Motorola 6809 multi-microprocessor operated control units which are housed in dust proof steel cabinets.

More information on requests, for spam protection please introduce yourself properly.

Main data of one mill:
Manufacture’s type: NTK 130F/LM
Year of manufacture 1988
Total operating hours: approx. 75000
Rated capacity, max: 145 kW
Number of blades: 3 pcs
Rotor diameter: 22 m
Rotor speed: 44.5 rpm
Cut-in wind speed: 4.0 m/sec
Cut-out wind speed: 53 m/sec (120 mph)
Hub height: 26 m
Generator: ASEA 145 kW / 1500 rpm / 50 Hz
Blade type: LM 9.7 m H/H/T diam. 21 m
Gear box type: Lohman & Stolterfort GPC 145
Clutch type: Lohr & Brokamp Universal Joint No 105
Total weight: 15200 kg.

250KW Wind turbines.