Rated power(w) 2000
Maximal power(w) 2450
Rated rotation(rmp) 350
Starting torque(n/m) 0.87
Reted speed(m/s) 3.6
Cut-in speed(m/s) 2.5
Normal working speed(m/s) 3-25
Shut down(m/s) 40
Normal output voltage(dc) 48
Optional output voltage(dc) 28-240
Optional minimum outpvoltage(dc) 28
Blade diameter(m) 3.5
Blade material enhanced frp
Number of baldes 3
The weight of the main power(kg) 80
The height of the tower(m) 6
The weight of the tower(kg) 57-70
Recommended battery capacity(ah*n) 12v*200ah*4
Export packing standards
Model: ZH2KW Rated Power: 2000 Watts Maximum Power: ~ 2500 Watts Type: 3 Blade Upwind Rotor Diameter: 3.6 m (12 ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Over speed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 48 VDC Nominal . Wooden case.
1.Magnetic saturation generator design, 20years designed life. 2.2-2.5m/s start-up wind speed under low torque start-up technique. 3.Independent power supply 4.Blades are casted into molding at one time with balance up to 99%. 5.Bearings import from japan (nsk), long service time (5 years maintenance-free). 6.Low cost and low noise 7.Low cut in wind speed (3m/s) to guarantee the maximum generation at low wind speed. One pc in one plywood
Rated votage¡êo48v Working wind speed: 1.8-25m/s Survival max wind speed¡êo40m/s Working temp.: -30¡«50¡æ As buyer's request
Rotor diameter: 3.5m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output power: 2000W Maximum output power: 2950W working voltage: DC24/36/48/96/120/240V,AC220V Annual average energy production: 4672KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 8.0m/s17.8mph Storm-stand: up to 50m/s Max rotate speed: 400r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch- Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours
Model: ZH2KW Rated Power: 2000 Watts Maximum Power: ~ 2500 Watts Type: 3 Blade Upwind Rotor Diameter: 3.6 m (12 ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Over speed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 48 VDC Nominal .
Model: SJ2500 2kw Rated Frequency ( Hz ): 50 / 60 Rated Voltage ( V ): 110 / 120 / 220 / 230 / 240 Max. Power Output ( KW ): 2.3 / 2.5 Rated Power Output ( KW ): 2.1 / 2.3 Phase: Single Voltage Regulate: AVR Power Factor: 1 Engine Model: SJ170FE Bore Stroke ( mm ): 70 54 Compression Ratio: 8.5 : 1 Starting System: Recoil Start & Electric Start Engine Oil Capacity ( L ): 0.6 Fuel Tank Capacity ( L ): 15 Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder N.W. / G.W. (KG): 44 / 47 Dimension (LWH): 610 450 465 20FT (set) : 240
Product description Wind turbine / wind power generator 1. Dual, automatic emergency braking system. 2. Unique anti-vibration design. 3. Waterproofing. 4. Unique anti-vibration design. 5. Efficient aero-dynamic design, compared with the vertical shaft, power utilization rate is greatly improved. 6. High strength, corrosion resisting aluminium alloy. 7. Unique permanent magnetic material generator, small size, light weight, power output is very high. 8. Low noise level. Model Nl-3kl-w Rated powe,3kw Rated voltage(dcv) 240v Rated voltage(dca) 17v Wind wheel diameter 4m Blade material Gfrp strengthening Blade numbe,3 Started wind speed 3.0m/s Rated wind speed 10 m/s Safety wind speed 40m/s Upwind method Upwind Rated rotating speed(rpm) 300 Tower height 9m Generato,Asynchronous Braking system Electronic magnet+manual Protection grade Ip55 Noise level ¡Ü55db Insulation class F Operation mode Automatic or manual Suggested battery capacity 12v 200ah 10pcs Efficiency 0.85
Parameter Blade diameter:2.6m Number of blades: 3 Blade material: fiber glass Rated wind speed: 8m/s Start wind speed: 3m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Rated output power: 300w Max output power: 450w Rated speed: 400r/min Type of generator: permanent-magnets-3 phase a.C. Speed regulation: yaw& magnetic resistance output voltage : dc24v Tower type: pull wire tubular tower Normal tower height: 6m Weight of top section: 30kg Necessary battery: 12v 100ah 2 pieces Can supply power for ú¦color tvú¿below 29 inchú¬ú¼lightingú¼electric fan and charger. Packing no. N.W kgs G.W kgs Packing size L (cm) W (cm) H (cm) M3 1 50 62 135 40 31 0.1674 1 3 7 81 55 6 0.0267 3 30 30 200 6 6 0.0216 5 83 99 0.2157
Parameter Blade diameter:2.2m Number of blades: 3 Blades material: fiber glass Rated wind speed: 8m/s Start wind speed: 3m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Rated output power: 200w Max output power: 350w Rated speed: 400r/min Type of generator: permanent-magnets-3 phase a.C. Speed regulation: yaw & magnetic resistance output voltage : dc24v, Tower type: pull wire tubular tower Normal tower height: 6m Weight of top section: 27kg Can supply power for ú¦lightingú¼electric fan and charge. Necessary battery: 12v 100ah 2 pieces Packing no. N.W kgs G.W kgs Packing size L (cm) W (cm) H (cm) M3 1 55 70 113 51 32 0.1844 3 30 30 200 6 6 0.0216 4 85 100 0.2060