Rated votage¡êo48v
Working wind speed: 1.8-25m/s
Survival max wind speed¡êo40m/s
Working temp.: -30¡«50¡æ
As buyer's request
Model: ZH2KW Rated Power: 2000 Watts Maximum Power: ~ 2500 Watts Type: 3 Blade Upwind Rotor Diameter: 3.6 m (12 ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Over speed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 48 VDC Nominal . Wooden case.
Rotor diameter: 3.5m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output power: 2000W Maximum output power: 2950W working voltage: DC24/36/48/96/120/240V,AC220V Annual average energy production: 4672KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 8.0m/s17.8mph Storm-stand: up to 50m/s Max rotate speed: 400r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch- Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours
1.Magnetic saturation generator design, 20years designed life. 2.2-2.5m/s start-up wind speed under low torque start-up technique. 3.Independent power supply 4.Blades are casted into molding at one time with balance up to 99%. 5.Bearings import from japan (nsk), long service time (5 years maintenance-free). 6.Low cost and low noise 7.Low cut in wind speed (3m/s) to guarantee the maximum generation at low wind speed. One pc in one plywood
Phase Three Phase Machine Structure Horizontal Color Grey Voltage 440 Condition Used Operating Mode Automatic Power 3-6kw Pressure High Pressure Uses Automotive Industry, Steel Industry Specialities High Performance Port India port
Model: Fzy2kw, Rotor diameter: 3.2m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 320r/min, Rated output power: 2kw, Max output power: 3kw, Output voltage: dc48v 72v 96v /ac220v, Start wind speed: 2.5m/s, Rated wind speed: 9m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw&magnetic resistance, Charge control: Aic(automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 5000kwh, Recommended accumulators: 12v200ah6pcs( 1200ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower, Tower height: 6m (optional), Weight: 80kgs (without tower), Can supply power for: air-condition refrigerator water pump electric cooker tv washer illumine fanner charge, Plywood box
Product information Model: hummer wind turbine 2kw H-3.8-2kw wind turbine which features high efficiency and low rated wind speed introducing several patented technologies and some special materials. Application Well used in: Housing Telecommunications station Tv transfer station Monitoring station (military, hydrology, observatory) Water-pumping station Technical parameter Rated power(w) 2000 Maximum output power (w) 3200 Charging voltage (v) dc 120v Blade quantity 3 Rotor blade material grp Rotor blade diameter(m) 3.8 Start-up wind speed (m/s) 3.0 Rated wind speed (m/s) 9.0 Rated rotating rate (r/min) 450 Wind energy utilizing ratio (cp) 0.45 Generator output single-phase Frequency conversion ac Rated charging current (a) 15 The maximum charging current (in a short time )(a) 28 Output ac frequency (hz) 0-370 Generator efficiency >0.8 Tower diameter(mm)114*2000*5 Tower height(m) 10 The weight of generator(kg) 25 Battery 12v 150ah/200ah 10pcs Plywood container.
Model: ZH2KW Rated Power: 2000 Watts Maximum Power: ~ 2500 Watts Type: 3 Blade Upwind Rotor Diameter: 3.6 m (12 ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Over speed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 48 VDC Nominal .
Blade diameter 2.5m Rated Rotated speed 50 Rated wind speed 10m/s Rated power 2000W Max voltage 3000w Output voltage 96v/48v Start up wind speed 2.5(m/s) Operating wind speed 3-30(m/s) Security wind speed 50(m/s) Height of tower 8m Weight of top section 232/252kg Output controller system charger and inverter Capacity and quantity of battery(reference) 12V100AH 8pcs can supply power for ice box, washer, water pump, tv, lighting, electric fan, charger. Wooden case packing.
Rated power(w) 2000 Maximal power(w) 2450 Rated rotation(rmp) 350 Starting torque(n/m) 0.87 Reted speed(m/s) 3.6 Cut-in speed(m/s) 2.5 Normal working speed(m/s) 3-25 Shut down(m/s) 40 Normal output voltage(dc) 48 Optional output voltage(dc) 28-240 Optional minimum outpvoltage(dc) 28 Blade diameter(m) 3.5 Blade material enhanced frp Number of baldes 3 The weight of the main power(kg) 80 The height of the tower(m) 6 The weight of the tower(kg) 57-70 Recommended battery capacity(ah*n) 12v*200ah*4 Export packing standards
