Vga Extender Audio Cat5 Transmitter And Receiver Suppliers and Manufacturers

Specification Resolution Up to 1600x1200 @ 75Hz (depending on the cable length) Input/Output Analog signal red, green, blue 0.7v p-p 75 ohm Sync TTL compatible Horizontal/Vertical Sync Polarity Positive/Negative System Cable CAT5 Shielded FTP Cable 2 x 2 x 24 AWG Maximum Distance 350m/1200ft Audio Mono Operating Temperature 5¿¬p C to 40¿¬p C/41¿¬p F to 104¿¬p F Storage Temperature -40¿¬p C to 70¿¬p C/-104¿¬p F to 158¿¬p F Warranty 1 Years

Frequency coverage:2403.33 mhz to 2479.10 mhz S/n ratio, a weighted 90 db í· 85 db Audio distortion 0.3 % í° 0.5 % Channel separation 70 db í· 65 db Audio bandwidth 20hz to 20khz Transmitting power í· +15dbm Receiver sensitivity -95 dbm @ 12 db sinad Standard expotting packing

QN-Kit07 Indoor Receiver Kit Rf Wireless Audio Receiver Transmitter Module Feature 1.433/868/315 Mhz high quality transmitter & Receiver Kit for garage door 2.learns up to 100 transmtters 3.can printed logo on back side 4.2/4 channel independent set-up 5.best price and quality 6.can be OEM or ODM Model No.: QN-Kit07 Power supply: 9-24V DC/AC Measure Type: Fixed Code & Rolling Code Relay spec: 12A 14VDC or 7A 120VAC Operating distance: 40-50m Gurantee: 1 Years Modulation: Ook/Ask/Fsk Application: : garage door opener,alarming system,security system,vehicles etc HS Code: 85269200 Power Adapter: Yes MOQ: 500 CE: Yes

IR Receiver Extender Cable has built-in RC filter circuit, which can effectively reduced interferences picked up by the extended cable, the shell is made of light filter material, which helps to resist visible light disturbance, remote control function will become more flexible and more convenient. * Different carrier frequency versions: 36kHz, 38kHz or 56kHz * Available in 2.5mm, 3.5mm - 3-contacts plug, or USB plug. * Standard cable length of 1.0, 1.5 or 2.0 meter (or Custom-made) * Suitable for Set top box, car DVD AV system & other IR control system Carton

Chipset: ralink 3070 Frequency band: 2.4ghz Agreement: 802.11b/g/n Transmission rate: 150mbps Antenna type: 36dbi panel antenna Usb cable:5m or 10m Interfce type: usb 2.0 32pcs/carton 0.759kg/pc Carton size: 72*42*58cm

1.Anti-interference 2.Digital wireless transmission 3.Long distance transmission 4.Work frequency band:2400mhz-2483mhz ism 5.High fidelity tone quality, hdcd effect; 16/48k/64k sampling ratio 6.Latency less than 0.5ms 7.Encryption function. 10*10cm

Supporting standard 2D 5key or 3D 5key mouse; It supports multiple sensors: KA8,MX8650A, V108; It supports 6 buttons that can be customized; Supporting mouse wheel It supports the change of DPI by buttons and upper software; FOB Price: US $0.5 / Pair Min. Order: 20 Pairs Port: Shenzhen, China Production Capacity: 5000000 Sets Payment Terms: T/T Model NO. BYKC68MS Transport Package 5000 Sets Per Carton Origin China It supports the combination of key pair codes; It supports four power saving modes; It supports the mouse button to wake up the PC in standby mode; It supports 16 frequency hopping points working at 2402mhz ~ 2480mhz frequency points; It supports 32 bit code ID; Supporting FCC test;

Working temperature: -40¡æ~+75¡æ Trasmission range: 20/40/60/80/100km(sm) 2km(mm) Application: military, oil and gas, mines, security, broadcasting, tactical field lan.

Differential Transmitter In All Brand Emerson , Rosemount , Honeyweel , F+h , E+h Etc

Features: 1.With 8 selectable channels (Dip Switch) 2.Transmit the crisp A/V signal with radio frequency 3.With 5.8GHz antennas embedded into housing 4.Remote control the A/V source with IR extender 5.Compatible with Camcorder or CMOS camera application 6.NTSC / PAL video format available. Specifications: ITEM501T501R 5.8GHz antennaDirectional flat antennaDirectional flat antenna 433MHz antennaExternal omni-directional antennaInternal Omni-directional antenna Transmit power17dBm(Typical)- Sensitivity--86dBm type Frequency band5.725GHz~5.865GHz5.725GHz~5.865GHz Channel Customer8 selectable channels8 selectable channels Input formatAvailable in NTSC or PAL- Output format-Available in NTSC or PAL Video input level1 Vp-p@75Ω- Audio input level1 Vp-p@600Ω- Video output level-1 Vp-p@75Ω Audio output level-1 Vp-p@600Ω Input / output ConnectorMINI DIN jackMINI DIN jack Operating conditionIndoor usage recommendIndoor usage recommend Remote control frequency433.92MHz433.92MHz IR carrier frequency32~38KHz32~38KHz Power Consumption9Volt DC, 300mA(Typical)9Volt DC, 300mA(Typical) Operating Temperature-10℃ ~ +60℃-10℃ ~ +60℃.

The ZP050 Temperature Transmitter is designed to meet common Single Point measurement application requirements. This transmitter can easily work with a variety of sensors (RTDs and thermocouples) and thermowells. It provided in a head mount configuration suitable for installation in a wide variety of connection heads and housings. Provide HART protocol, equipped USB mini-USB interface, easy-to-use configuration method from any PC. Power Supply 12VDC~40VDC Input Types 4-20mA / 20-4mA; RTD(PT100,PT200,PT500,PT1000,Cu50); R(0-400 ,0-4000 ); TC(K,E,S,B,R,J,T,N); mV(-80-+80mV); V(0-1V) Output signal types 4-20mA or 0...1/5V, 0...1/10V Response Time < 0.4S (0-90%,100%-10%) Precision ±0.05% Temp. Drift 0.01% per Celsius Volt fluctuation influence �±0.005% X span / below V DC Load Capacity < 700 in 24VDC; (mA output) < 1060 in 36VDC (Volt output) Isolation Strength AC1500v 1min between the input / output IP Ranking Casing/Terminal IP50/IP20

> User configurable CO ranges up to 1000 ppm > Optional 4-digit dual row LCD display to display carbon monoxide value in ppm > Field replaceable CO sensor > Health / status (Heartbeat) LED > DIP selectable Loop powered current output or voltage output available > Optional dual 2-wire output available > IP65 protection for enclosure > Wall mount arrangement > Internal switch provided to adjust zero ppm >DIP for range selection

> User configurable CO ranges up to 1000 ppm > Optional 4-digit dual row LCD display to display carbon monoxide value in ppm > Field replaceable CO sensor > Health / status (Heartbeat) LED > DIP selectable Loop powered current output or voltage output available > Optional dual 2-wire output available > IP65 protection for enclosure > Wall mount arrangement > Internal switch provided to adjust zero ppm >DIP for range selection

> 2 x 2-wire, 4~20 mA or 0~10V DC outputs with RTD resistance output option > Any or both outputs can be assigned to RH or T or Dew point or specific derived physical quantity > RH & T range selection, parameter configuration and calibration with > USB to serial converter (DCC501) > Handheld configurator (HHC202) > Inbuilt LCD and 3 keys >. Health / status (Heartbeat) LED > Calculated physical quantities -Dew point -Absolute humidity -Heat index -Enthalpy -Air density > Isolated RS485 / MODBUS RTU or BACnet MS/TP > Replaceable RH+T sensor > Convenient installation with 2-part housing with fixed back and removable electronics > Stylish housing with vents for air flow across sensor for better accuracy