The ZP050 Temperature Transmitter is designed to meet common Single Point measurement application requirements. This transmitter can easily work with a variety of sensors (RTDs and thermocouples) and thermowells. It provided in a head mount configuration suitable for installation in a wide variety of connection heads and housings.
Provide HART protocol, equipped USB mini-USB interface, easy-to-use configuration method from any PC.
Power Supply 12VDC~40VDC
Input Types 4-20mA / 20-4mA;
RTD(PT100,PT200,PT500,PT1000,Cu50);
R(0-400 ,0-4000 );
TC(K,E,S,B,R,J,T,N);
mV(-80-+80mV);
V(0-1V)
Output signal types 4-20mA or 0...1/5V, 0...1/10V
Response Time < 0.4S (0-90%,100%-10%)
Precision ±0.05%
Temp. Drift 0.01% per Celsius
Volt fluctuation influence �±0.005% X span / below V DC
Load Capacity < 700 in 24VDC; (mA output)
< 1060 in 36VDC (Volt output)
Isolation Strength AC1500v 1min between the input / output
IP Ranking Casing/Terminal IP50/IP20
HR3288 HART Smart Pressure Transmitter Overview .HR3288 HART protocol Smart Pressure Transmitter is a high-precision, high-stability, multi-parameter, 4.5 Digit LCD displayed intelligent pressure measurement products which complies with the HART® protocol. Users can use the HART communicators to manage, adjust or monitor process variables when HART instruments running in the process, or use the buttons for on-site configuration ,it's easy to operate. .This product adopts the latest application results of digital technology in the field of sensor manufacturing, and combined with the most advanced designing and manufacturing pressure transmitter technology in the world, precision digital temperature compensation and nonlinear calibration technology, safe and reliable explosion-proof structure and standardized signal output with high accuracy and wide range coverage,its also adapt to the place where fluid pressure is precisely measured. .The product works in a two-wire mode and can be directly replace the simulative two-wire 4mA-20mA DC output transmitter. Digital communication with manual operator. Electromagnetic radiation fits IEC801 standard. Features .4mA~20mA DC current output superposition HART protocol digital communication (two-wire system) . Digital compensation and nonlinear calibration techniques . Digital error correction with local, remote zero and range calibration functions . digital wide temperature compensation in -10 ° C ~ 80 ° .can be operated by buttons to facilitate configuration. .Reverse power protection, over voltage protection . Anti-surge, Anti-electromagnetic interference
NCS-PT105 series Smart Pressure Transmitter with advanced, mature, reliable 3151 capacitance sensors has been designed meticulously by combining advanced microprocessor technology and digital capacitance measurement technology. The powerful functions and high-speed computing capability of the microprocessor make it have excellent qualifications such as smart, high precision, high reliability, stable zero and so on. Its LCD can display many physical parameters (e.g. pressure, temperature, current and so on). It can realize the functions such as zero adjustment, range settings by key-press operation, and it is easy for field testing. NCS-PT105 series Smart Pressure Transmitter supports HART, FF, and PA protocol and can measure pressure, differential pressure, liquid level, flow, and other industrial parameters. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.. According to the type of measurable pressure: Model Pressure type NCS-PT105 SR Micro-differential pressure transmitter NCS-PT105 SG Gauge pressure transmitter NCS-PT105 SA Absolute pressure transmitter NCS-PT105 SD Differential pressure transmitter NCS-PT105 SH Differential pressure transmitter for high static pressure According to the protocol: Model Communication Protocol type NCS-PT105 H HART NCS-PT105 F FF H1 NCS-PT105 P PROFIBUS PA As a transitional communication protocol in fieldbus, HART protocol achieves digital transmission on the existing analog transmission lines, and is compatible with existing analog signal control system. Either FF H1or PROFIBUS PA is a new generation of digital communication protocol, used in field connection, and linking field devices. International Standard IEC61158-2 is used in physical layer. Therefore, either FF H1or PROFIBUS PA is fieldbus actually. As following, Smart Transmitter with HART protocol is named as HART Smart Transmitter; Smart Transmitter with FF H1 protocol is named as FF Smart Transmitter; Smart Transmitter with PROFIBUS PA protocol is named as PA Smart Transmitter, All of these (Transmitters with the three types of fieldbus protocol) are named as Smart Pressure Transmitters or Smart Transmitters. In addition, HART Smart Transmitter has passed explosion-proof certification from National Supervision and Inspection Center for Explosion Protection and Safety of Instrumentation (NEPSI).
Product Overview NCS-PT105IIS series Smart Pressure Transmitter with advanced, mature, reliable Piezoresistive Silicon Sensors has been designed meticulously by combining advanced microprocessor technology and digital capacitance measurement techniques. The powerful functions and high-speed computing capability of the microprocessor make it have excellent qualifications such as intelligent, high-precision, high reliability, stable zero and so on. Its LCD can display many physical parameters such as pressure, temperature, current. It can be realized zero adjustment, range settings and other features by key-press operation, and easy to on-site tests. NCS-PT105IIS series Smart Pressure Transmitter supports HART, FF H1, Profibus PA, Profibus DP protocol and can measure pressure, differential pressure, liquid level, flow, and other industrial parameters. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc. Features Performance up to 0.075% of accuracy Gauge pressure, absolute pressure Automatically environmental temperature compensation Parameters can be set by magnetic sticks, communicator, HOST software Measurement media: liquid, gas and stream HART®, FOUNDATIONâ?¢ Fieldbus, PROFIBUS® Up to ±0.1% of Upper Range Limit (URL) for 1 year
Description: CJBT-I utlizes specific temperature module,can modify kinds of thermocouple,hot resistance, then output standard analog signals.It is high accuracy,strong anti-interference,anti-explosion,heat resistance,anti-knock. Features: Wide measure range All material is Stainless steel Various Pressure port type Protection Grade: IP65 Application: Measure temperature of gas or liquid which is compatible to 316L stainless steel Used in field of petroleum, chemical industry, Metallurgy, Electricity, hydrology etc. Performance Parameters: Measure Range: -551200 Accuracy: ±0.5%typical ±1.0%MAX Long term stability: ±1.0%F.S/year Working temperature: -20~80 Power Supply: 1530VDC Output signals: 420mA 15VDC Pressure Port: M27Ã?2 or customize Shell Material: Stainless Steel 1Cr18Ni9Ti Wire: polythene Protection Grade: IP65
Supplier: Laptops, desktops, computer pcs, printers, scanners, ups, led monitors, cisco networking products, storage and solutions, processors and memories, copier machines, cctv's, ubiquiti, perfumes, thermal rolls, a4 papers, stationery, perfume/ body spray
Quick Details Place of Origin: Sichuan, China (Mainland) Brand Name: SAND Model Number: PT124B Pressure Range: 0~5~150MPa / 0~500~20000psi Accuracy: ±1.0%FS Power: 24VDC(9~36VDC) Output: 0~5V or 1~5V or 0~10V or 0~20mA or 4~20mA Probe Temperature: 400 Temperature Drift:
Features: Suitable for industrial application. Integrated design combines PT100 and transmitter. Easy installation. Sensor type: RTD Pt100 Measuring range: -50 ... 200 C Output: DC 4 ... 20 mA(2-wire) Accuracy: 0.5% F.S. IP rating: IP65
Differential Transmitter In All Brand Emerson , Rosemount , Honeyweel , F+h , E+h Etc
NCS-TT105 temperature transmitter is a new generation of smart transmitter with FF Hl, PROFIBUS PA or HART technology. NCS-TT105 transmitter integrates abundant function blocks and realizes not only normal measurement function but also complicated control strategy. NCS-TT105 uses digital technology, so it can connect with many types of thermocouple and thermo resistive sensors. It has wide range and simple interface between field and control room, which reduces the expense of installation, operation and maintenance.
