Find Verified Ultra Low Sulphur Diesel En590 10Ppm Suppliers, Manufacturers and Wholesalers

Diesel EN590 10PPM / Ultra Low Sulphur Diesel (ULSD) available for international bulk supply. Quantity: 100,000 MT to 500,000 MT per transaction, subject to availability and contract terms.

Delivery / Transaction Structures: TTT, TTV, TTO, VTV and CIF.

Destination: Worldwide, subject to port acceptance, logistics feasibility, sanctions/compliance screening and seller confirmation.

Loading Port: TBA / nominated according to the confirmed supply and transaction structure.

Product Standard: EN 590 specification, with sulphur content up to 10 mg/kg (10 ppm), subject to the applicable product specification and independent inspection.

Inspection: Independent inspection such as SGS or equivalent, as mutually agreed by the parties.

Commercial terms: Price, origin, loading location, delivery schedule, payment terms and transaction procedure are confirmed based on the buyer's specific requirements and the available cargo.

Serious buyers are invited to submit their required quantity, destination, preferred delivery structure and purchase requirements for commercial consideration.

EN590 10 PPM Diesel is a low-sulfur automotive diesel fuel designed to meet the requirements of the European diesel fuel specification EN 590, with sulfur content limited to a maximum of 10 mg/kg (10 ppm). It is suitable for modern diesel engines and is widely used for passenger vehicles, commercial vehicles, generators, agricultural machinery and industrial equipment.

Cetane Number : 51
Cetane Index : 46
Density at 15C : 820 - 845 kg/m
Flash Point : 55C
Water Content : 200 mg/kg

Ultra-low sulfur content of up to 10 ppm
Designed for modern diesel engines
Helps reduce sulfur-related emissions
Suitable for advanced emission-control systems
Good ignition characteristics with high cetane quality

We sell Oil and Gas Products
Wholesale Ultra -low sulphur diesel ( EN590) Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6

EN590 10ppm is a high-quality automotive diesel fuel that meets the European standard EN 590 and contains a maximum sulfur content of 10 parts per million (ppm).

Key Specifications of EN590 10ppm Diesel
Sulfur Content: Maximum 10 ppm (0.001%)
Fuel Type: Ultra-Low Sulfur Diesel (ULSD)
Standard: EN 590
Application: Diesel-powered cars, trucks, generators, construction equipment, and marine engines (where permitted)
Environmental Benefit: Lower sulfur emissions, reduced particulate matter, and compatibility with modern emission-control systems.

Typical EN590 Parameters
Property Typical Value
Sulfur Max 10 ppm
Cetane Number Min 51
Density @ 15C 820-845 kg/m³
Flash Point Min 55C
Water Content Max 200 mg/kg
Lubricity (HFRR) Max 460m

Why Buyers Prefer EN590 10ppm
Cleaner combustion and lower emissions.
Suitable for modern Euro 5 and Euro 6 diesel engines.
Better engine performance and fuel efficiency.
Widely accepted for international diesel trading.
Often required by environmental regulations in Europe and many other regions.

In International Oil Trading, EN590 10ppm is one of the most commonly traded diesel grades. It is frequently offered through:

Spot contracts
Annual supply contracts
Tank-to-Tank (TTT)
Tank Takeover (TTO)
FOB (Free on Board)
CIF (Cost, Insurance & Freight).

EN590 10 PPM Diesel is a premium-grade Ultra Low Sulfur Diesel (ULSD) that complies with the European EN590 standard for automotive diesel fuel. It contains a maximum sulfur content of 10 parts per million (ppm), making it suitable for modern Euro 5 and Euro 6 diesel engines. This fuel is designed to provide cleaner combustion, improved engine efficiency, reduced emissions, and enhanced protection for advanced fuel injection and exhaust after-treatment systems such as Diesel Particulate Filters (DPF) and Selective Catalytic Reduction (SCR).
Applications :
Road Transportation
Commercial Fleets
Heavy Trucks & Buses
Construction Equipment
Mining Machinery
Agricultural Equipment
Industrial Power Generation
Marine Auxiliary Engines (where permitted)

We can sell EN590 diesel from Refinery directly( Georgia Oil gas Corporation )

We prefer to deal with end buyers or with buyer's agents eventually.No brokers chains please

Our first Trial order trough a safe and documented MT103 and regular orders via L/C at sight

We are serious,transparent and respectable 100%!We supply the goods 100%.

Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature).

Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine.

The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades:

L - summer, used at ambient temperatures above 0 C;
3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation <-35 C and n <-25 C), or winter, used at temperatures up to -30 C, then the fuel must have a stasis <-45 C and n <-35 C);

- Arctic diesel fuel, the temperature of which is up to -50 C. The sulfur content in diesel fuel of grades L and Z does not exceed 0.2% for type I fuel and 0.5 for type II fuel, and grade A 0.4%

EN590 Diesel is a refined automotive diesel fuel formulated for modern compression-ignition engines and international fuel markets. Commonly supplied as EN590 10 PPM diesel, it is characterized by ultra-low sulfur content and controlled fuel-quality parameters designed for efficient combustion and reduced sulfur-related emissions. The fuel can be supplied in bulk quantities for transportation fleets, distributors, power-generation applications and industrial users, subject to applicable regulations and contractual specifications. Quality is verified through laboratory testing of sulfur, cetane characteristics, density, viscosity, flash point, water content, distillation and other relevant parameters. Bulk deliveries can be arranged through suitable terminals, pipelines, tankers or approved fuel-storage facilities.

Key Specifications

Product Type: Automotive Diesel Fuel
Standard: EN 590
Sulfur Content: Maximum 10 mg/kg (10 PPM) for EN590 10 PPM grade
Appearance: Clear to yellowish liquid
Cetane Number: Minimum 51 under EN 590 requirements
Density at 15�°C: Typically 820 - 845 kg/m Cube
Kinematic Viscosity at 40 Degree C: Typically 2.0 - 4.5 mm Square/s
Flash Point: Minimum 55 Degree C

EN590 10ppm Diesel is a premium ultra-low sulfur diesel fuel designed for industrial, commercial, and international transportation applications. Coordinated through refinery-linked supply channels, this fuel supports efficient engine performance, cleaner combustion, and compliance with modern international fuel standards. Mountain Top International Ltd provides reliable coordination support for logistics, shipment execution, and international transaction alignment.

Diesel EN590 10ppm

Product Name:
Diesel EN590 10ppm

Product Grade:
EN590 10ppm Low Sulfur Diesel

Minimum Price (USD):
Price on Request

Maximum Price (USD):
Price on Request

Price Units:
Metric Ton / Barrel

Incoterms:
FOB / CIF / CFR

Product Detailed Description:
Diesel EN590 10ppm is a high-quality, ultra-low sulfur diesel fuel designed for modern diesel engines, commercial vehicles, industrial machinery, generators, and fuel distribution networks. With a maximum sulfur content of 10ppm, it supports cleaner combustion, improved engine performance, and reduced emissions. Atlantic Energies supplies Diesel EN590 10ppm through reliable supplier networks to meet the requirements of global buyers and bulk fuel importers.

Minimum Order Qty:
As per buyer requirement / Bulk order basis

Units:
Metric Ton / Barrel

Packaging Details:
Supplied in bulk through tanker vessel, tank truck, rail tank, or storage terminal as per agreed delivery terms.

Production Capacity:
As per supplier availability

Country Where Product Is Manufactured:
As per supplier origin / Contract terms

Sample Available:
Yes

Sample Cost Born By:
Buyer

Seller Product Code:
AE-EN590-10PPM

Product Standards:
EN590 Standard, 10ppm Sulfur Diesel

Brand:
Atlantic Energies

Model No.:
EN590-10PPM

HS Code:
271019 / 27101943

Key Specifications

Key Specifications 1:
Ultra-low sulfur diesel fuel with maximum sulfur content of 10ppm.

Key Specifications 2:
Suitable for automotive diesel engines, commercial vehicles, generators, and industrial fuel applications.

Key Specifications 3:
Refined petroleum product supplied as per international diesel fuel standards and contract specifications.

Key Specifications 4:
Available for bulk supply with FOB, CIF, or CFR delivery terms depending on buyer requirement.

Key Advantages

Key Advantage 1:
Cleaner combustion with low sulfur content, helping reduce harmful emissions and improve fuel efficiency.

Key Advantage 2:
Reliable bulk supply through trusted supplier networks for global fuel buyers and distributors.

Key Advantage 3:
Product quality can be supported with standard documentation and inspection as per contract terms.

Key Advantage 4:
Flexible supply terms, quantity arrangements, and delivery coordination based on buyer requirements.

EN590 10PPM Diesel is a high-quality ultra-low sulfur automotive fuel manufactured to meet the European EN 590 specification. With sulfur content limited to a maximum of 10 ppm, it is designed for modern diesel engines, commercial vehicles, generators, construction equipment, and industrial applications requiring cleaner combustion. The fuel typically offers a minimum cetane number of 51 and density around 820-845 kg/ cubic meter at 15 Degree Celsius, subject to the applicable specification and batch certificate. EN590 Diesel supports efficient engine operation, reduced sulfur-related emissions, and compatibility with advanced emission-control systems. Bulk supply is available for qualified international buyers through suitable export and logistics arrangements.

Ultralow sulfur diesel ULSD is a cleanerburning diesel fuel that contains a maximum of 15 parts per million ppm of sulfur ULSD contains 97 less sulfur than lowsulfur diesel LSD which typically contains 500 ppm of sulfur The European Union began mandating the reduction of diesel sulfur content in 1993 and the United States started phasing in ULSD requirements for highway vehicles in 2006 It was developed to allow for the use of improved pollution control devices that reduce diesel emissions ULSD can significantly reduce emissions when used in combination with cleanerburning diesel engines and vehicles It may react with strong acids or strong oxidizing agents such as chlorates nitrates and peroxides You should avoid contact with heat sparks fire and oxidizing agents The appearance of ULSD should be clear and bright free from visible sediment and water

Diesel Gas Oil Ultra-Low Sulphur Diesel (ULSD) is a refined diesel fuel with significantly reduced sulfur content, meeting stringent environmental standards. It ensures cleaner emissions, improved engine performance, and fuel efficiency, making it ideal for modern diesel engines in transportation and industrial applications.

Diesel EN590 is a premium ultra-low sulfur automotive diesel fuel manufactured in accordance with European EN590 specifications. It is designed to provide efficient combustion, lower emissions, improved engine performance, and compatibility with modern diesel engines. Sulfur content is maintained at a maximum of 10 ppm to meet international environmental standards. Suitable for automotive, industrial, transportation, and commercial applications. Available for bulk export shipments with flexible packaging and logistics arrangements.

Product: EN590 10ppm or 50ppm
Destination : ASWP
MOQ : 100,000 Metric Ton and above
Price : US$460 (validity 5 working days)
Payment : Transferable IRDLC MT700 / TT MT 103

Sulfur Content : Max 10 mg/kg (10 ppm)
Cetane Number : Min 51
Cetane Index : Min 46
Viscosity : 40C 2.0 - 4.5 mm
Flash Point : Min 55 C
Water Content : Max 200 mg/kg
Total Contamination : Max 24 mg/kg
Ash Content : Max 0.01%
Carbon Residue : Max 0.30%
Lubricity (WSD @ 60'C) : Max 460 m
Polycyclic Aromatic Hydrocarbons : Max 8 - 11%
FAME (Biodiesel Content) : Max 7% v/v
Appearance : Clear and bright fuel

EN590 10ppm is a diesel fuel specification, most notably known for its ultra-low sulfur content of 10 parts per million (ppm). It is the standard for automotive diesel fuel in the European Union, USA, and many other parts of the world, and is also referred to as ultra-low sulfur diesel (ULSD). This specification ensures reduced sulfur emissions, contributing to cleaner air.

Key Properties of EN590 10ppm Diesel:

Sulfur Content: Maximum 10 ppm, signifying a very low sulfur content compared to higher sulfur diesel grades.
Cetane Number: Minimum 51, indicating the fuel's ignition quality.
Density: Typically between 820-845 kg/m at 15C.
Viscosity: Usually within the range of 2.0-4.5 mm at 40C.
Flash Point: Minimum 55 C.
Boiling Range: Generally falls between 180-360 C.
Other Properties: Includes parameters like carbon residue, water content, and lubricity, all within specified limits.

Note:

For more details and price quotation, please feel free to contact us via Email or WhatsApp, it will be our pleasure to work with you.

PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.

Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.

As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.

The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS.

PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions.

Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.

As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process.

The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather.
Our products are exported to Asia, Europe, America, and the CIS.

Product Grade: EN590 10 PPM


Product Detailed Description

Diesel EN590 10 PPM is a low-sulfur automotive diesel fuel formulated according to EN590 requirements. With a maximum sulfur content of 10 ppm, it is suitable for modern diesel engines, commercial transportation, industrial generators, and other compatible diesel applications. Available for bulk B2B supply subject to product availability, agreed specifications, quantity, inspection, and delivery terms,

Production Capacity

As per confirmed order and product availability

Country Where Product is Manufactured

Oman (only if this is the actual country of origin)

Key Specifications 1

Sulfur Content: Maximum 10 ppm

Key Specifications 2

Cetane Number: Minimum 51; Density at 15C: 820-845 kg/m3

Key Specifications 3

Flash Point: Minimum 55C; Water Content: Maximum 200 mg/kg

Key Specifications 4

Suitable for commercial transportation, heavy-duty vehicles, industrial generators, and compatible diesel-powered equipment.

Key Advantage 1

Ultra-low sulfur content suitable for applications requiring low-sulfur diesel fuel.

Key Advantage 2

EN590 specification suitable for international B2B diesel fuel requirements.

Key Advantage 3

Quality can be verified through agreed product specifications and independent inspection when required.

Key Advantage 4

Bulk supply with flexible delivery, quantity, inspection, and international shipping arrangements.

EN590 FOB TTV Seller Procedure
Origin : Kazakhstan
Loading port: Singapore port
UNIT PRICE : USD 490/MT
PAYMENT TERMS : MT103
TRANSACTION TERM : FOB

1. Buyer accepts seller working procedure and issue ICPO
2. Seller's issues commercial invoice (CI), Buyer signs and returns back commercial invoice.
3. Seller issue TSR with GPS coordinate to Buyer Company,
4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. ( Note* One day extension fee is 78,000 usd and will be deduct when buyer is paying total amount )
5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties.
6. Seller injects product into Buyer's vessel or injects into Buyer's tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer.
7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer.

Kazakhstan EN590-10PPM
CIF Price $480 USD Gross/$4700 USD Net Per Mt
Monthly Quantity 10,000 MT - 5000,000MT (+/- 5%) X 12
Destination Port:
PAYMENT: T/T, MT103
commission $5 / $5

CIF TRANSACTING PROCEDURE

1.Buyer issues CP, ICPO inserting sellers terms and procedures.

2.Seller issues draft contract/SPA which is open for amendments.

3.Buyer returns the signed draft contract with NCNDA/IMFPA and a letter of guarantee to perform.

4.Seller submits the signed SPA for registration and legalization with the appropriate authorities.

5.Seller sends the below listed partial pop documents to buyer via mail.
A. statement of availability of product
B. commitment to supply the product
C. certificate of origin
D. Product Passport

6.Buyer within 7 banking days issues DLC swift MT700 or SBLC swift MT760 according to Seller's fiduciary bank verbiage to
seller nominated fiduciary offshore bank account for first month shipment, and whereby buyer fail to issue payment instrument within 7 banking days, buyer will make cash deposit of $320, 000 by TT wire transfer for allocation and security guarantee to
enable seller charter vessel and commence shipment, and this payment shall be deducted from the total cost of product after
inspection at discharge port.

7.Seller bank issues the full set of proof of product (pop) and shipping document with 2%pb (performance bond) to buye's bank.
QQ Certificate & Product passport docs, all will be issued on time.

8.Shipment commences immediately as scheduled in the contract.

9.Buyer pays for the total product value via TT/MT103 to the seller's bank after successful SGS/CIQ inspection at discharge port
and tittle of product ownership transferred to buyer.

10.Seller pays all intermediaries involved in transaction as per signed NCNDA/IMFPA within 72 hours.

EN590 10ppm diesel is a high-quality refined petroleum fuel designed for modern diesel engines.

It contains ultra-low sulfur content (maximum 10 parts per million), making it environmentally compliant and suitable for road transport, marine, industrial machinery, and power generation.

EN590 10 PPM Diesel is an ultra-low sulfur automotive diesel fuel designed for compatible diesel engines and fuel distribution systems. It is specified to contain a maximum sulfur content of 10 milligrams per kilogram (10 ppm), subject to verified product documentation and the applicable EN 590 edition. The fuel is used in road transport, commercial vehicle fleets, and other approved diesel applications. It can be supplied for bulk trading and distribution, subject to availability and local regulations. Buyers should verify the certificate of quality, cetane number, density, cold-flow properties, origin, quantity, and delivery terms before confirming an order.

NSRIC Green Supplies Inc. (NGS) is your trusted, licensed intermediary for secure and efficient global trade of Ultra Low Sulfur Diesel (ULSD). As environmental regulations tighten worldwide, the demand for this cleaner, high-performance fuel is critical. NGS specializes in bridging the gap between verified end sellers and serious end buyers, ensuring a transparent, compliant, and profitable transaction every time.

Our expertise is rooted in managing the complex logistics and documentation required for international petroleum trading. We handle the intricacies of supply chain security, quality assurance, and legal compliance, allowing our B2B clients and traders to focus on their core business.

By partnering with NGS for your ULSD needs, you gain access to a global network of trusted suppliers, guaranteeing a consistent and reliable supply of high-specification fuel that meets the strictest international standards. Secure your long-term ULSD supply chain through our professional intermediary services and mitigate the risks associated with global commodity trading. Contact NGS today to discuss your specific tonnage requirements.

Product Grade

ULSD 10 PPM

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Ultra Low Sulfur Diesel (ULSD) is a refined diesel fuel characterized by its very low sulfur content. It is suitable for modern diesel engines, commercial transportation, industrial equipment, generators, and other compatible applications. The product is available for bulk international B2B supply, subject to agreed specifications, quantity, inspection, availability, and delivery terms.

Minimum Order Qty

1,000

Units

Metric Ton (MT)

Packaging Details

Bulk

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (use this only if Oman is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

ULSD-10PPM

Product Standards

Applicable ULSD specification / EN 590 where applicable

Brand

Unbranded

Model No.

N/A

HS Code

2710.19

Key Specifications 1

Sulfur Content: Maximum 10 ppm

Key Specifications 2

Cetane Number: Minimum 51; Density at 15�°C: 820â??845 kg/m�³

Key Specifications 3

Flash Point: Minimum 55�°C; Water Content: Maximum 200 mg/kg

Key Specifications 4

Suitable for commercial vehicles, heavy-duty transportation, industrial generators, power equipment, and other compatible diesel applications.

Key Advantage 1

Very low sulfur content suitable for applications requiring ultra-low sulfur diesel.

Key Advantage 2

Suitable for modern diesel engines and international B2B fuel requirements.

Key Advantage 3

Product quality can be verified against agreed specifications through inspection and laboratory testing where required.

Key Advantage 4

Available for bulk international supply with flexible quantity, delivery, inspection, and shipping arrangements.

Vessel loaded with EN 590 10 ppm 100,000 MT diesel en route Singapore ETA end March 2026.
STS Operation in Singapore, no upfront payment, no re-routing fees, no deposit, buyer to submit CPA for approval by seller prior to ATB, please act fast before prices go up.

We have large quantities of EN590 available at various major ports of the world, only on FOB TTT immediate lifting, for serious buyers only.


Kindly note that we only offer Tank To Tank (TTT), our products is of high quality with good market competitive prices and buyer friendly transaction procedures.

Premium-grade, highly refined Ultra-Low Sulfur Diesel (ULSD) that fully complies with the European EN 590 standard for automotive road fuels. Formulated to meet stringent Euro 5 and Euro 6 emissions regulations.

Key Specifications:

Product: EN590 Diesel Fuel
Sulfur Content: Maximum 10 ppm
Standard: EN 590
Quality: Premium Low-Sulfur / Export Grade
Appearance: Clear and bright, free from visible contamination
Density at 15C: 820-845 kg/m³
Cetane Number: Minimum 51
Cetane Index: Minimum 46
Flash Point: Minimum 55C

EN 590 Diesel is a European-standard automotive diesel fuel designed for modern compression-ignition engines. The commonly traded EN 590 10 ppm grade is ultra-low-sulfur diesel with sulfur at or below 10 mg/kg (10 ppm). It is used in passenger cars, trucks, buses, generators, construction equipment and other diesel-powered machinery

Biodiesel/FAME : Depending on grade/contract; specify B0 or permitted FAME content
Appearance : Clear, bright petroleum distillate
Cold-flow properties : According to applicable EN 590 climatic class
Standard : EN 590
Typical use : Automotive, commercial, industrial diesel engines

High-quality automotive diesel fuel manufactured to the EN 590 specification, with sulfur content limited to a maximum of 10 mg/kg (10 ppm). Designed for modern compression-ignition diesel engines.

Applications & ComplianceEmissions Support: Compatible with Euro 5 and Euro 6 engines using advanced after-treatment like DPF (Diesel Particulate Filters) and SCR (Selective Catalytic Reduction).Common Uses: Passenger cars, heavy-duty commercial fleets, buses, agricultural machinery, and industrial logistics

EN590 Diesel Fuel 10 PPM is a premium-quality Ultra-Low Sulfur Diesel (ULSD) manufactured to meet the European EN590 fuel specification. With a maximum sulfur content of 10 parts per million (ppm), it is designed for modern diesel engines equipped with advanced emission control systems.

EN590 10 PPM is widely used in passenger vehicles, commercial fleets, heavy-duty trucks, buses, marine support equipment, power generators, and industrial machinery. It provides cleaner combustion, improved engine performance, and reduced exhaust emissions.

Product Name : EN590 Diesel Fuel 10PPM Grade
Grade : EN590 10 PPM (ULSD)
Sulfur Content ; Max.10 ppm
Cetane Number : Min. 51
Density @ 15C : 820 - 845 kg/m
Kinematic Viscosity @ 40C : 2.0 - 4.5 mm/s
Flash Point : Min. 55C
Water Content Max. : 200 mg/kg
Ash Content : Max. 0.01%
Lubricity (Wear Scar) : Max. 460m
Appearance : Clear and Bright
Color : Light Amber
Origin : As per refinery

We are supplier and exporter of Diesel. We have various types of Diesel. Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency.

Ultra-low sulfur diesel compliant with European EN-590 standards for high efficiency and low emissions. Independently tested to ASTM specifications for reliable performance in modern diesel engines.

High-quality ultra-low sulfur diesel fuel meeting European standards, ensuring efficient combustion, reduced emissions, engine protection, and reliable performance for modern diesel engines.

Ultra Low Sulfur Diesel (ULSD) is a refined petroleum fuel designed for diesel engines and equipment requiring low-sulphur fuel. In markets such as the United States, ULSD generally contains no more than 15 parts per million (ppm) sulphur. Low-sulphur diesel helps enable the use of advanced exhaust after-treatment systems and supports compliance with applicable emissions regulations. It is widely used in commercial transportation, logistics fleets, industrial machinery, generators, and selected marine or off-road applications where permitted. Specifications vary by country and fuel standard, so sulphur limits, cetane rating, density, flash point, and other properties should be confirmed before purchase.

En590 10ppm Diesel
Vopak-to-vopak Procedure:
1- Buyer Sends Cis + Cp
2- Conference Call /meeting Between Buyer & Seller Where Both The Parties Exchanges
Vopak Tank Coordinates
3- Seller Release Ci, Buyer Counter Signs
4- Seller Releases Full Pop With Fresh Sgs Report
5- Buyer Makes Full Payment Via Mt 103
6- Seller Transfers Title To Buyer
7- Buyer Pays Commission To Intermediaries
8- Seller Issues Spa Contract For 12 Months
Platts {-} Minus 50 U$d Nwe And U$d 10.00 Commission Payable By The Buyer. Hence Net Cost To
The Buyer Will Be Nwe Platts {-} Minus 40 U$d
Product: En590-10ppm
Quantity: 100,000 Mt
Availability: Fob Rotterdam {vopak Tank/s}
Monthly Deliveries In Annual Contract
Conditions: Ncnda { Attached} And Intermediary Services CONTRACT {ATTACHED} will be signed
by the Buyer once their CIS + CP is accepted by the Seller.

En590 Diesel Cif With Escrow Payment

En590, 10 Ppm
Origin Kazakhstan
Quantity 50,000 & Above
Price Price - $420 Gross/ $400 Net Per Mt
Terms Of Transaction
Delivery Cif Any Safe World Port
Payment Term Escrow/ Mt 103 Tt Wire
Origin Kazakhstan
Inspection Any Universally Accepted Q&q Inspection Company
Commission To Be Shared 50% Each By Both Sides
Procedure Transaction Procedure (cif)
1. Buyer Issues Icpo:
2. Seller Issues Draft Spa
3. Buyer Signs Spa And Commercial Invoice
4. Seller Registers Spa:
5. Seller Issues Partial Proof Of Product (ppop)
6. Escrow Agreement And Guarantee Deposit:
�?¢ Upon The Buyer's Receipt And Satisfactory Verification
Of The Ppop, The Buyer, Seller, And An Agreed Fiduciary
(escrow Agent) Shall Jointly Execute A Tripartite
Escrow Agreement.
�?¢ Subsequently, The Buyer Shall Deposit A Guarantee
Deposit Of Usd 360,000.00 Into The Fiduciary's Designated
Escrow Account, Typically Located In Singapore Or
Hong Kong.
�?¢ This Guarantee Deposit Will Be Credited Towards The
Total Cif Value Of The First Shipment.
7. Fiduciary Holds Funds:
�?¢ The Fiduciary Shall Hold The Guarantee Deposit In
Escrow
8. Product Loading, Full Proof Of Product And Shipment:
�?¢ Upon The Successful Completion Of Cargo Loading, The
Seller Shall Issue The Full Proof Of Product (pop) And
Complete Shipping Documents To The Buyer,
9. Transfer Of Title And Off-loading Commencement
10. Final Payment:
Following The Confirmation Of The Vessel Tanker Port
Clearance, The Buyer Shall Make The Balance Payment
For The Full Shipment Via Telegraphic Transfer (tt Wire)
Or Mt103.

EN590 ULSD available in Major Ports for FOB shipping terms, Kazakhstan Origin,
EN590 FOB price is $470/mt including $10 commission to buyer's side.
FREE ON BOARD (FOB) PROCEDURE
1. Buyer Issues ICPO:
The buyer submits an Irrevocable Corporate Purchase Order (ICPO) with banking details and passport information.
2. Seller Issues Commercial Invoice (CI):
The seller sends a Commercial Invoice (CI) for the available product, which the buyer countersigns.
3. Seller Provides POP Documents:
The seller provides Proof of Product (POP) documents, including:
SGS Report
Tank Storage Receipt (TSR)
Product Analysis
Injection Report
Authority to Verify (ATV)
Refinery Commitment Letter
Authorization to Sell and Collect (ATSC)
4. Buyer Verifies POP:
The buyer contacts the tank farm to confirm product availability.
5. Payment & Dip Test:
The buyer pays for a 5-day tank lease, and the seller issues an Unconditional Dip Test Authorization (UDTA). The tank farm provides a Clearance Access Entrance Permit (CAEP) for the dip test and SGS report.
6. NCNDA/IMFPA Signed:
All intermediaries sign the NCNDA/IMFPA and send it to the seller for endorsement.
7. Sealing & Final Payment:
After a successful dip test, the buyer requests tank sealing. The buyer pays for the full product via MT103/T/T and extends the tank lease for 48 hours.
8. Payment to Intermediaries:
The seller pays the intermediaries within 48 hours of receiving payment

Diesel EN590 (10PPM) ULSD (Ultra Low Sulfur Diesel) is a premium diesel fuel that conforms to the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.

EN590 10PPM ULSD

EN590 ULSD available in Major Ports for FOB shipping terms, Kazakhstan Origin

Interested buyer or buyer mandate should send their inquiries. We have available product in HOUSTON, ROTTERDAM, FUJAIRAH and other major ports on FOB basis, and also we have TTO procedure.

Product Description : EN590 Diesel is a premium automotive diesel fuel manufactured according to the European EN590 standard developed by the European Committee for Standardization (CEN). It is designed for modern diesel engines equipped with advanced emission control systems and contains a maximum sulfur content of 10 ppm, ensuring cleaner combustion, reduced emissions, and improved engine performance.

Sulfur Content Maximum : 10 ppm
Cetane Number : Minimum 51
Density @15C : 820 - 845 kg/m
Viscosity @40 C : 2.0 - 4.5 mm
Flash Point : Minimum 55C
Water Content Maximum : 200 mg/kg
Lubricity (Wear Scar) : Maximum 460 m
Ash Content : Maximum 0.01%

EN590 10ppm Diesel is a high-quality ultra-low sulfur diesel fuel that meets European standard EN590. It is designed for modern diesel engines, offering clean combustion, reduced emissions, improved engine performance, and compatibility with advanced emission control systems such as Euro V and Euro VI engines.

Sulfur Content: Max 10 ppm (0.001%)
Cetane Number: Min 51 (typical 51 - 55)
Density @15C: 820 - 845 kg/m
Flash Point: >55 C
Viscosity @40C: 2.0 - 4.5 mm/s
Water Content: 200 ppm
Ash Content : 0.01%
Distillation (95%): 360 C
Appearance: Clear, bright liquid

EN590 10 PPM Ultra Low Sulfur Diesel is a premium automotive diesel fuel manufactured to European EN590 specifications. The product contains a maximum sulfur content of 10 parts per million (ppm), ensuring cleaner combustion, reduced emissions, improved engine performance, and compliance with stringent environmental regulations. Suitable for passenger vehicles, commercial fleets, industrial equipment, generators, marine support applications, and transportation industries. Available for bulk export under FOB, CIF, and other international trade terms.

Fuel Type : Ultra Low Sulfur Diesel (ULSD)
Standard : EN 590
Sulfur Content : 10 ppm (0.001%)
Cetane Number : 51
Density @ 15C : 820 - 845 kg/m
Viscosity @ 40 C 2.0 - 4.5 mm
Flash Point : 55C
Water Content : Very low (trace levels only)
Distillation : Controlled boiling range as per EN 590
Lubricity : HFRR 460 um
Appearance : Clear, bright, free from particles
CFPP (Cold Filter Plugging Point) Seasonal grades (summer/winter/arctic)
Aromatic Content : Controlled and limited