Ts418 1N426 Thermopile Ndir Co2 Sensor Suppliers and Manufacturers

TS418-1N426 Thermopile Infrared Sensor SPECIFICATIONS * Thermopile IR-Sensor * Filter for NDIR CO2 Gas Detection * Single Element * Very High Signal * Flat Filter * Small Package * Accurate Reference Sensor TS418-1N426 Thermopile Infrared Sensor DESCRIPTION Thermopiles are mainly used for contactless temperature or non-dispersive infrared measurement in many applications. Their function is to transfer the heat radiation emitted from the objects or other infrared sources into a voltage output. TS418-1N426 Thermopile Infrared Sensor FEATURES * Very High Signal * Accurate Reference Sensor * 4.26µm Narrow Band Pass * Small TO-18 package TS418-1N426 Thermopile Infrared Sensor APPLICATIONS * NDIR CO2 Gas Detection

TS418-1N426 Thermopile Infrared Sensor SPECIFICATIONS * Thermopile IR-Sensor * Filter for NDIR CO2 Gas Detection * Single Element * Very High Signal * Flat Filter * Small Package * Accurate Reference Sensor TS418-1N426 Thermopile Infrared Sensor DESCRIPTION Thermopiles are mainly used for contactless temperature or non-dispersive infrared measurement in many applications. Their function is to transfer the heat radiation emitted from the objects or other infrared sources into a voltage output. TS418-1N426 Thermopile Infrared Sensor FEATURES * Very High Signal * Accurate Reference Sensor * 4.26µm Narrow Band Pass * Small TO-18 package TS418-1N426 Thermopile Infrared Sensor APPLICATIONS * NDIR CO2 Gas Detection -

SH-300-NDC NDIR CO2 Sensor Module Features * Best Extremely Precise Sensor * Quick Response Time * Long Time Use, Stable performance at High & Low Temperature * Waterproof Filter for anti static filters fine dust and humidity in the air * One-way air indraft for represent average value when momentary CO2 Value change in the air * Low Current consumption * Output support: UART, 0~3V Analog SH-300-NDC NDIR CO2 Sensor Module Application * CO2 Control for Indoor Air Quality * CO2 Measuring for Ventilation Control * CO2 Control for Building, Hospital, School * CO2 Control for Air cleaner, Air conditioner. * Mushroom Control, Boiler Control SH-300-NDC NDIR CO2 Sensor Module Technical Specification * Measuring Type: Dual Light Wavelength NDIR * Measuring Range: 0 ~ 3,000 / 5,000 / 10,000 ppm * Accuracy: ±2% FS, ±3 % measured value @0 ~ 50'C * Response Time: Every 2.0 Seconds * Warm-Up Time @ 25'C: < 90sec * Output support: UART, 0~3V Analog * Operating Temperature: -10 ~ 50'C * Operating Humidity: 0 ~ 99.5% RH (Non-Condensing)

SH-300-NDTH NDIR Carbon Dioxide Sensor Module Features * Best Extremely Precise Sensor * Quick Response Time * Long Time Use, Stable performance at High & Low Temperature * Waterproof Filter for anti static filters fine dust and humidity in the air * One-way air indraft for represent average value when momentary CO2 Value change in the air * Low Current consumption * Output support: UART, 0~3V Analog SH-300-NDTH NDIR Carbon Dioxide Sensor Module Application * CO2 Control for IAQ * Building, Hospital, School * Air cleaner, Air conditioner * Mushroom control, Boiler control SH-300-NDTH NDIR Carbon Dioxide Sensor Module Technical Specification * Measuring Type: Non-Dispersive Infrared (NDIR) * Measuring Range: 0 ~ 3,000 / 5,000 / 10,000 ppm * Accuracy: FS ±2%, measured value±3% @ 0 ~ 50'C * Response Time: Every 2.0 Seconds * Warm-Up Time @25'C: < 90sec * Output support: UART, 0~3V Analog * Operating Temperature: 0 ~ 50'C * Operating Humidity: 0 ~ 95%RH (Non Condensing)

CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Introduction Single Beam(single light source, single wavelength) NDIR CM1106 (Miniature size) can be used to detect CO2 concentration of indoor air by adopting advanced non-dispersive infrared technology(NDIR). It is widely used in IAQ monitor, air conditioner with purifying function, air purifier, ventilation system, automotive and other consumer electronic products etc. CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Features * Advanced non-dispersive infrared technology(NDIR) with independent intellectual property * High accuracy: temperature calibration within whole measurement range * High stability: advanced auto-calibration at background * Small size and compact structure, easy to install CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Application * IAQ monitor * Air conditioner with purifying function * Air purifier * Ventilation system * Automotive CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Specification * Measurement range: 0-2000ppm (extending to 5000ppm, 10000ppm) * Accuracy: auto-calibration within temperature and concentration range * Working temperature: -5'C~50'C * Storage temperature : -20'C~60'C * Working humidity: 0-95%RH (non-condensing) * Signal output: UART-TTL, PWM, IIC * Dimension: 33*19.7*8.9mm * Maintenance: Auto-calibration -

Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor MisIR Summary NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. Based on GSS patented solid state IR sensor technology and innovative optical designs, MISIR is configured to meet the requirements of the HVAC and Demand Led Ventilation markets. Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor MisIR Characteristic * Low Power 20mW * Measurement ranges from 0 to 1% * Low noise measurement

High speed carbon dioxide sensor ndir co2 sensor sprintir summary Sprintir is a high speed (20 hz) co2 sensor, ideally suited for applications which require capture of rapidly changing co2 concentrations including metabolic assessment and analytical instrumentation. Fast, accurate carbon dioxide sensor The sprintir carbon dioxide sensor is the fastest, most accurate co2 sensor on the market. A breakthrough in ndir technology, the sprintir uses advanced solid state indium antimonide ledâ??s and detectors to offer a robust sensor with no moving parts, no heated filaments, and incredibly low power requirements. The sensor comes in four versions - from 0% to 100% - all capable of the same high-speed co2 measurement. This makes the sprintir especially useful in biological applications. * high speed sensing (20hz) * measurement ranges from 0 to 100% * 3.3v supply * low power requirement 35mw * flow through adaptor (optional) High speed carbon dioxide sensor ndir co2 sensor sprintir specifications Measurement range: 0-5%, 0-20%, 0-60%, 0-100% Accuracy: â±70 ppm +/- 5% of reading Measurement noise:

MH-Z19B NDIR Infrared CO2 Sensor Module Applications MH-Z19B NDIR infrared gas module is widely used in * HVAC refrigeration * Indoor air quality monitoring. * Smart home appliances * School * Air cleaner MH-Z19B NDIR Infrared CO2 Sensor Module Technical parameters * Main Functions and Features * High sensitivity, high resolution * Low power consumption * Output modes: UART and PWM wave * Temperament compensation, excellent linear output * Good stability * Long lifespan * Anti-water vapor interference * No poisoning MH-Z19B NDIR Infrared CO2 Sensor Module Technical Parameters * Target Gas: CO2 * Working voltage: 4.5~ 5.5 V DC * Average current: < 60mA(@5V) * Peak current: 150mA (@5V) * Interface level: 3.3 V(Compatible with 5V) * Preheat time: 3 min * Response Time: T90 < 120s * Working temperature: 0 ~ 50 deg C * Working humidity: 0~ 90% RH (No condensation)

Ee893 digital co2 sensor module for oem applications The e+e co2 module ee893 is designed for oem applications and for demanding environment. A multiple point co2 and temperature adjustment procedure leads to excellent co2 measurement accuracy over the entire temperature working range; this is a must for process control and outdoor applications. The e+e dual wavelength ndir co2 sensing procedure compensates automatically for ageing effects. Ee893 is highly insensitive to pollution and offers outstanding long term stability. With its small dimensions and electrical connection via contact pins and pads, ee893 is the optimal choice for oem devices such as wireless transmitters, hand-helds or data loggers. The measured data, with a range of up to 10000ppm, is available on the e2 digital interface. An optional kit facilitates easy configuration and adjustment of the module. The measurement interval can be set according to the application requirements; by this the average current consumption can be reduced to less than 60î¼a for battery-operated devices. Ee893 digital ndir co2 sensor module typical applications * data loggers * hand helds * wireless transmitters * building management * demand controlled ventilation Ee893 digital co2 sensor module key features * autocalibration * outstanding long-term stability * temperature compensation * low power consumption * very small size Ee893 digital ndir co2 sensor module technical data * co2 working range: 0 - 2000 / 5000 / 10000ppm * supply voltage: 4.75 - 7.5v dc * average power consumption: 58âµa ~ 3.7ma * calibration interval: >5 years * operation temperature: -40~60'c (-40~140'f) * operation humidityâ??: 0~95% rh (not condensating) * operation pressure: 85~110kpa (12.33 ~ 15.95psi)

SH-300-NDC NDIR CO2 Sensor Module Features * Best Extremely Precise Sensor * Quick Response Time * Long Time Use, Stable performance at High & Low Temperature * Waterproof Filter for anti static filters fine dust and humidity in the air * One-way air indraft for represent average value when momentary CO2 Value change in the air * Low Current consumption * Output support: UART, 0~3V Analog SH-300-NDC NDIR CO2 Sensor Module Application * CO2 Control for Indoor Air Quality * CO2 Measuring for Ventilation Control * CO2 Control for Building, Hospital, School * CO2 Control for Air cleaner, Air conditioner. * Mushroom Control, Boiler Control SH-300-NDC NDIR CO2 Sensor Module Technical Specification * Measuring Type: Dual Light Wavelength NDIR * Measuring Range: 0 ~ 3,000 / 5,000 / 10,000 ppm * Accuracy: ±2% FS, ±3 % measured value @ 0 ~ 50'C * Response Time: Every 2.0 Seconds * Warm-Up Time @25'C: < 90sec * Output support: UART, 0~3V Analog * Operating Temperature: -10 ~ 50'C * Operating Humidity: 0 ~ 99.5% RH (Non-Condensing)

This item will be shipped to Seoul, Korea. We share the available quantity with a price according to the schedules. 1) 12th on April: 20,000 -> sold out 2) 22nd on April: 20,000 -> Booked (but, there is a possibility of cancellation.) If the buyer will cancel their order, we can give you information by email or whatsapp. unit price: $8/1pcs, Advanced T/T 3)15th on May: 20,000 unit price: $5.5/1pcs, Advanced T/T bank transfer Product data sheet http://file2.dzsc.com/product/18/09/02/1140443_111

Ultra Low Power NDIR CO2 Sensor Carbon Dioxide Sensor 0-100% VOL Summary COZIR is an ultra low power (3.5mW4), high performance CO2 sensor,ideally suited for battery operation, portable instruments and HVAC. Based on GSS IR LED and Detector technology, and innovative optical designs, the COZIR offers the lowest power NDIR sensor available.Optional temperature, humidity and light sensing are available. COZIR is a third generation product from GSS - leaders in IR LED CO2 sensing. Specification 1) Ultra-low Power 3.5mW 2) Measurement ranges from 5% to 100% 3) 3.3V supply. 4) Peak current only 33mA. 5) Optional Temperature and Humidity Output 6) Can be made by analog output ( this option can not together with temperature & humidity output)

Inline ndir h4 sensor general harateristis Measurment range 0-4.4 vol.-% (100%ueg) Temperature and pressure ompensated Integrated temperature measurement Rs485 interfae 4-20ma interfae Inline ndir h4 sensor speifiation Measuring gas: h4 Measurement range: 0 - 4.4 vol.-% (0 - 100%ueg) Resolution: 300ppm Auray: < 2% of the measured value Response time: < 10s Heat up time: < 10min Storage temperature: -20 - +85 Operating temperature: -20 - +65 Operating humidity range sensor: 0 - 99% (not ondensated) Operating humidity range eletronis: 0 - 85% (not ondensated) Interfae: rs485 Analogue output: 4 - 20ma Supply voltage: 10 - 36vd Power onsumption: < 2w Long-term stability: < 5% of the measured value per 1 year

IRceL CH4 NDIR CH4 Sensor Description Miniature infrared sensor with on-board EEPROM and thermistor IRceL CH4 NDIR CH4 Sensor Key Features & Benefits: * Integrated thermistor for accurate temperature compensation * EEPROM programmed with sensor specfic performance characteristics * Compact Size IRceL CH4 NDIR CH4 Sensor Technical Specifications * Operating Principle: Non-Dispersive Infra-Red * Measurement Range: 0-5% vol. Methane * Accuracy (-20C to +50C): Within ± (0.1% vol CH 4 + 4% of concentration)?? * Response Time (T90): < 35 Seconds * Supply Voltage: 3-5 VDC, 3.3 V to utilise EEPROM calibration * MTBF: > 5 years

Based on Infrared absorbing principle, not only it is well selective to the target gas, but also detecting accurately and stable to gas concentration. The module is compact structure, free maintenance, application is various industry situation.

IRceL CH4 NDIR CH4 Sensor Description Miniature infrared sensor with on-board EEPROM and thermistor IRceL CH4 NDIR CH4 Sensor Key Features & Benefits: * Integrated thermistor for accurate temperature compensation * EEPROM programmed with sensor specfic performance characteristics * Compact Size IRceL CH4 NDIR CH4 Sensor Technical Specifications * Operating Principle: Non-Dispersive Infra-Red * Measurement Range: 0-5% vol. Methane * Accuracy (-20'C to +50'C): Within ± (0.1% vol CH 4 + 4% of concentration)â?? * Response Time (T90): < 35 Seconds * Supply Voltage: 3-5 VDC, 3.3 V to utilise EEPROM calibration * MTBF: > 5 years -

Introduction Irm300 is one of the general ndir co2 gas modules, which adopting ndir principle, consists of carefully designed light chamber, precise electric circuit and intelligent software. With the help of single light source, dual channel detector, and Unit Storage temperature Tstg -20 to 80 ¡ãc Working temperature Ta 0 to +50 ¡ãc Working humidity Ha 0 to 90 % rh Working pressure Pa 0.8 to 1.2 Atm Electric characteristics Description Symbol Min. Typical Max. Unit Supply power Vs 4.6 5 5.4 V Maximum current Imax 130 160- Ma Light current Iavg 60 70 Ma Frequency F 0.2 1 2 Hz Preheat time Twarm 90 120 180 Sec Performance characteristics Description Min Typical Max Unit Detection range 0 2000 50000 Ppm Detection accuracy - ¡¨¤60ppm¡¨¤5% fs - Ppm T90 Diffusing - 60 90 Sec Pumping - 10 20 Sec Repeatability Zero

High-Reliability CO2 Module For Various Applications IAQ, Greenhouse, HVAC * Use Dual Beam NDIR technology to improve the long term stability * Cost - effective CO2 monitors made with IR-SOC technology * Small Module for OEM ZG09 High-Reliability CO2 Sensor Module Application: * IAQ (Indoor air quality) * Greenhouse * HVAC.DCV (Demand Control Ventilation) ZG09 High-Reliability CO2 Sensor Module Specification * CO2 Measurement Range: 0~10,000ppm/1.0%â?? * Operating temperature: 0~50'C (32~122'F) * Operating humidity: 0-95% RH, non-condensing * CO2 Accuracy: ±50ppm ±3% of reading * Repeatibility: ±20ppm * Resolution: 1ppm * Response Time: About 1 min

SH-300-DS NDIR Carbon Dioxide Sensor Module Features * Best Extremely Precise Sensor * Quick Response Time * Long Time Use, Stable performance at High & Low Temperature * Waterproof Filter for anti static filters fine dust and humidity in the air * One-way air indraft for represent average value when momentary CO2 Value change in the air * Low Current consumption * Output support: UART, 0~3V Analog SH-300-DS NDIR Carbon Dioxide Sensor Module Application * CO2 Control for Indoor Air Quality * CO2 Measuring for Ventilation Control * CO2 Control for Building, Hospital, School * CO2 Control for Air cleaner, Air conditioner. * Mushroom Control, Boiler Control SH-300-DS NDIR Carbon Dioxide Sensor ModuleTechnical Specification * Measuring Type: Dual Light Wavelength NDIR * Measuring Range: 0~3,000/5,000/50,000/100,000 ppm * Accuracy: ±2% FS, ±3% measured value @ 0 ~ 50'C * Response Time: Every 2.0 Seconds * Warm-Up Time @25'C: < 90sec * Output support: UART, 0~3V Analog * Operating Temperature: -10 ~ 50'C * Operating Humidity: 0 ~ 99.5% RH (Non Condensing)