TL-3 model Direct burning furnace with lower Inlet and upper outlet is consists of 8 parts: natural gas burner + inner tank + insulation box + fan + fresh air damper + waste heat recovery device + dehumidification fan + control system. It is specially designed for supporting downflow drying room/heating rooms. After fully combusts the natural gas inside the inner tank, it�´s mixed with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system.
4. Advantages/features
1. Simple structure and easy installation
2. Large air volume and small wind temperature fluctuation
3. Stainless steel high temperature resistant inner tank, durable
4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic),
5. High-density fire-resistant rock wool insulation box to avoiding heat loss
6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device.
8. Automatically replenish fresh air
TL-4 model Direct burning furnace with 3 layers sleeve consists of 3 layers of cylinders. It uses fully burned natural gas to obtain high-temperature flame, and mixing this temperature with fresh air to achieve the required hot air device. Due to the use of fully automatic single-stage fire, two-stage fire or modulating burner, the output hot air is extremely clean by natural gas fully burned, , meeting the drying and dehydration needs for most stuffs. The external fresh air enter the furnace body under negative pressure, takes two strokes and sequentially cools the middle cylinder and the inner tank. After being fully mixed with the high-temperature flame in the mixing zone, it is extracted from the furnace body and enter the drying room. When the temperature reach the setting number, the main burner stops working and the auxiliary burner continues to burn to maintain the temperature. When the temperature drops to the set lower limit temperature, the main burner will be run again.
4ã??Advantages/features
1. Simple structure and easy installation
2. Small air volume, high temperature, adjustable from normal temperature to 500â??
3. Stainless steel high temperature resistant inner tank, durable
4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic),
5. The fresh air has a long stroke that can fully cool the inner tank, so the outer tank can be touched without insulation.
6. Equipped with high temperature resistant centrifugal fan, large pressure center and long lift
TL-1 burning furnace is consists of 5 parts: natural gas burner + inner tank + insulation box + fan + control system. The burner forms a high-temperature flame after full combustion in the high-temperature resistant inner tank, these flame mixes with the cold or recirculated air to produce a new and high-temperature air. Under the action of the fan, it is discharged to provide heating for drying machines or places.
Advantages/features
1. Simple structure and low cost
2. Large air volume and small wind temperature fluctuation
3. Stainless steel high temperature resistant inner tank, durable
4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic),
5. High-density fire-resistant rock wool insulation box to avoiding heat loss
6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA
Incinerator bottom ash).
It can be classified as follows:
Basel code B1010.
EW Code: 17 04 02.
With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks.
This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape.
The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace).
The stock can contain all kind of aluminium packing.
We can currently provide this material in three different fractions and with different aluminium content:
3-8 mm split in two different qualities:
65% ± 3% Al
85% ± 3% Al
8-16 mm: about 70% ± 3% Al
16-60 mm: about 80% ± 3% Al
The material contains minor impurities typically stones, ash, glass.
Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed.
The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
TL-5 model Indirect burning furnace with 5 layers sleeves consists of 5 parts: a blower, flue gas induced draft fan, burner, five-layer sleeve body and control system. The flue gas in the furnace takes two rounds while the fresh air takes three rounds.
Natural gas is burned through the burner to generate a high-temperature flame. Under the action of the flue gas fan, the heat is transferred to the heated air through the five-layer sleeve wall and dense fins, meanwhile the flue gas is discharging out the body after it´s temperature down to 150. The heated fresh air enter the sleeves through blower. After heat mix, the temperature rises to the setting number and sent out from the hot air outlet.
4ã??Advantages/features
1. Continuously provide pure air with constant temperature and constant pressure.
2. Temperature has a wide adjustable range: 40~300
3. Indirect heating, automatic operation, exhaust gas emissions meet the requirements
4. Reasonable design, compact structure, thermal efficiency up to 75%
5. Stainless steel high temperature resistant inner tank, durable
5040 Tl 3 Model Natural Gas Direct Burning Furnace Suppliers
Short on time? Let Tl 3 Model Natural Gas Direct Burning Furnace sellers contact you.
Turmeric is one of nature's most powerful healers. The active ingredient in turmeric is curcumin. Tumeric has been used for over 2500 years in India, where it was most likely first used as a dye.
The medicinal properties of this spice have been slowly revealing themselves over the centuries. Long known for its anti-inflammatory properties, recent research has revealed that turmeric is a natural wonder, proving beneficial in the treatment of many different health conditions from cancer to Alzheimer's disease.
Here are 20 reasons to add turmeric to your diet:
1. It is a natural antiseptic and antibacterial agent, useful in disinfecting cuts and burns.
2. When combined with cauliflower, it has shown to prevent prostate cancer and stop the growth of existing prostate cancer.
3. Prevented breast cancer from spreading to the lungs in mice.
4. May prevent melanoma and cause existing melanoma cells to commit suicide.
5. Reduces the risk of childhood leukemia.
6. Is a natural liver detoxifier.
7. May prevent and slow the progression of Alzheimer's disease by removing amyloyd plaque buildup in the brain.
8. May prevent metastases from occurring in many different forms of cancer.
9. It is a potent natural anti-inflammatory that works as well as many anti-inflammatory drugs but without the side effects.
10. Has shown promise in slowing the progression of multiple sclerosis in mice.
11. Is a natural painkiller and cox-2 inhibitor.
12. May aid in fat metabolism and help in weight management.
13. Has long been used in Chinese medicine as a treatment for depression.
14. Because of its anti-inflammatory properties, it is a natural treatment for arthritis and rheumatoid arthritis.
15. Boosts the effects of chemo drug paclitaxel and reduces its side effects.
16. Promising studies are underway on the effects of turmeric on pancreatic cancer.
17. Studies are ongoing in the positive effects of turmeric on multiple myeloma.
18. Has been shown to stop the growth of new blood vessels in tumors.
19. Speeds up wound healing and assists in remodeling of damaged skin.
20. May help in the treatment of psoriasis and other inflammatory skin conditions.
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.
Specificatin:
grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3
AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.
Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.
Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Commodity:Sodium persulfate
Molecular Formula : Na2S2O8
Molecular weight : 238.13
Description
Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle.
Transportation
Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505
Water hazards class 1(slight water hazard)
All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed.
Package
(1) In 25kgs net multiple paper bags with one PE bag inner
(2) In 25kgs net PE bags
(3) In 25kgs net woven bags with two PE bags inner
(4) In 1000kgs net big woven bags with one PE bag inner
The above package is also with a pallet 1000kgs each.
Storage
NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect.
Application
Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc.
Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors;
cleaning and etching of printed circuits),activation of copper and aluminium surfaces.
Cosmetics : Essential component of bleaching formulations.
Paper : modification of starch,repulping of wet - strength paper.
Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans).
Others :
- Chemical synthesis
- Water treatment(decontamination)
- Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg)
- Disinfectant
ITEMS SPECIFICATIONS
Appearance white crystalline salt
Assay 99.0% w/w min
Active oxygen 6.65% w/w min
Chloride and chlorate(as CL) 0.005% w/w max
Ammonia (NH4) 0.05% w/w max
Manganese(Mn) 0.0001% w/w max
Iron(Fe) 0.001% w/w max
Heavy metals(as Pb) 0.001% w/w max
Moisture 0.05% w/w max
Decomposition of the product as supplied at above 65C
Recommended storage temperature Normal Temperature
Storage stability as from date of delivery 12 months
Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries.
About Raw Bauxite:
The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC).
About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same.
Application & Uses of Bauxite:
Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in :
- Aluminium
- Cement
- Chemical
- Blast Furnaces
- Iron/Steel Ladles, etc.
Advantages of Artha Bauxite:
Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
Padmaa is a Physically Modified starch, Vegan, Gluten-Free, Plant-based, Non-GMO starch. It is produced by Physical modification of starch to enhance its properties. It is used as functional food ingredient to enhance the texture of Pappad like products.
APPLICATIONS
As a texture enhancer:
Padmaa is primarily used to enhance the texture of Pappad related products such as Pappad, appalam, fryums. Padmaa form strong bonds, blending well with other ingredients. Hence it prevents the cracking of the product while drying. It also enhances the crispiness and enhances the mouth feel of the product.
As Natural Leavening agent:
Padmaa combines with the added leavening agent in the product and forms network like structure. This network formation traps the gases formed while kneading. Then the trapped gas is released instantly while frying in oil resulting in increased expansion of the product. It can also be used for Khakara.
FEATURES AND BENEFITS
*Padmaa enhances the texture of the product providing excellent crispiness
*It aids in uniform dispersion of all ingredients
*It can be used as Functional Food ingredient and label friendly product
*It is minimally processed starch with no residues of chemicals.
*It is highly bio-degradable and causes no harm to the Environment.
*Padmaa is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
*Padmaa contains no fat, protein, fiber, vitamins, or other minerals.
DOSAGE
Use 3 to 5% Padmaa of total batch size. For excellent results, maybe use upto 20% Padmaa of total batch size.
- The tray has wooden handle , is 3 dimensions for the customer option of 22.24, 28 cm
- Suitable dishes of food, fruit, decor house, etc
- Hardening with shiny material makes the product more beautiful
- It has 100% natural, eco-friendly materials
- Origin: Vietnam
- Production process:
* The pre-knitting cloud material is taken out of insects and treated for the best durability.
* Weave skillfully with the hand of a craftsman
* Burn the leftovers with fire, then codify the insects and clean them with a brush.
* Embellishing glue to help the product shape and increase beating strength
* Keep checking the dimensions and verifying them carefully.
* Sun exposure 1-2 days later put into the kiln to allow the freshly dried product to be bactericidal.
* Workers complete the final step of cleaning products and packaging
Caustic Soda Flakes Caustic Soda Pearls / Bead / Prill / Granule Caustic Soda solid Molecular formula: NaOH Molecule Weight: 40 H.S code: 28151100 CAS: 1310-73-2 UN number 1823 Dangerous Class 8 We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base
Specifications(Caustic Soda Pearls 99%min): 1. Item: STANDARD 2. NaOH: 99% 3. Na2CO3:0.5%max 4. NaCL:0.03%max 5. Fe2O3: 0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Flakes 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.5%max 4. NaCL:0.05%max 5. Fe2O3:0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Solid 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.9%max 4. NaCL:0.15%max 5. Fe2O3: 0.01%max Packing in 200KG net sheet metal drugs.
TL-2 model Direct burning furnace is consists of 6 parts: natural gas burner + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by full combustion of natural gas. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place.
4. Advantages/features
1. Simple structure and easy installation
2. Large air volume and small wind temperature fluctuation
3. Stainless steel high temperature resistant inner tank, durable
4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic),
5. High-density fire-resistant rock wool insulation box to avoiding heat loss
6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
7. left and right fans run alternately in cycles to ensure even heating
8. Automatically replenish fresh air
Carbon fish meat grill oven process:
A. special high temperature resisitant material,high heat deformation,the overall structure uses professtional plate ;
B.all into oxygen at the bottom of the damper desigh,fast burning heat rapidly ,at teh top of the air valve design,effective control of heat loss;
C. origianl putty separation technology,completely avoiding using process because of the putty mixed soot and open flame,ensure clean,health and safety ;
D.equipment applied double high temperature heat insulation material,insulation system,insulation with security,external direct touch with no hidden dangers.
Operation method:
A. all burning charcoal in the burning charcoal ,open at the top the smooke at the bottom of the mouth and damper;
B.charcoal burning closed 10 minutes to the degree of smoke-free smoke at the top of the mouth,the heat;
C.after the temperature reaches the standard,in the baking objects to buy object ;
D.5-10minutes,bake fish until brown on both sides,are taken from the furnace, the plate feeding .
Equipment advantages :
A. unique design principle ,the use of charcoal smoke all gathered in the grilled fish inside furnace,through the top of the exhaust pipe directly emitted;
B.rapid heat,guarantee the production speed,let the charcoal furnace cavity fully burning rapied heating up,wind valve,and through the top to the bottom of the design of air supply outlet temperature in the furnace in a 300-350 degree,put the fish in the distribution on the stove on content cabinet ,only 8-10 minutes can be produced;
C. a novel view and admire a gender ,the design of the gear type appeared in front of customers,the grilled fish process more transparent,more ornamental ,fish and clients directly face to face "communication " ;
D this design flexibility ,the real achieve a multi-purpose furnace, can bakering chicken duck cattle and sheep for equipment use diversification more rich .
Fuel: dual-use carbon box ,burning charcoal or alcohol (vegetable oil ) ,pump design.
Installation and commissioning
Overall production : have direct admission requiements,no installation commissioning ,one pace reachs the designated position .
1.Solve the smoke problem charcoal grilled fish
we are familiar with most of the fish appeared in the night street food stalls ,a rectangular fish furnace ,a big fan, the air is filled with smoke smell fish .
Commodity: Dry Coconut Shells Husk - Biofuel
Uses: (1). (for Heating, Energy Uses and to Power Mills to Generate Electricity End Applications), (2). Dry Coconut Shells Husk - for Carbonization in Charcoal Kilns - into Coconut Shells Husk Charcoal Lumps - natural sizes mesh for Production-of (BBQ- Briquettes, Hookah and Shisha- machine made Charcoal)
(3). Dry Coconut Shells Husk to Crush / Grind into Sawdust to Produce - Coconut Shells Pellets
Burning: Long Burning Time
Specification: Moisture: 10%
Ash Content: 2%
Calorific Value: 3500-4000kcal/kg
Bulk Density: 410kg/m3
Moisture - < 3%
Burning time - > 2.5 Hours
Heat Value (Calory) - > 7500J/kg
Fixed carbon - 80%~95%
Ash - < 2%
Color - Black
Packed in carton boxes 25x25x8 cm, avg. 2.7 kg per box. Any other packing on request.
Charcoal for hookah(Shisha)
1) Our hookah briquette is manufactured from high-quality grade â??Aâ?? birch coal.
2) During burning our product emits natural fine aroma that will be to the liking of true connoisseurs.
3) Due to special manufacturing technology our briquette burns longer and hotter than equivalents from other manufacturers.
4) When used our coal does not become loose and leaves minimum ash afterwards.
5) Environmentally friendly product that does not harm the environment.
6) We guarantee a stable quality of our product.
5040 Tl 3 Model Natural Gas Direct Burning Furnace Suppliers
Short on time? Let Tl 3 Model Natural Gas Direct Burning Furnace sellers contact you.
