Thermal Shock Test Chamber Suppliers and Manufacturers

2-zone thermal shock chamber consists of two chambers, one is hot chamber and one is cold chamber. Rapid sample elevator transfers between cold chamber to hot chamber to achieve temperature shock test. Thermal shock chambers are available in a variety of sizes and configurations to meet specific test requirements.

Features for thermal shock test chamber: 1, thermal shock test chamber - - two-zone is designed to provide two opposite extreme temperature environments for temperature cycling and thermal shock testing of electronic components and assemblies to military specifications. 2, thermal shock testing is achieved by quickly and repeatedly transferring a specimen between a hot chamber and a cold chamber by means of an automatic carriage transport system. The hot chamber is on the left side and the cold chamber is on the right. The cold chamber can be used as a full range test chamber. 3, touch screen programmable controller is produced in korea, perfect performance and stable. Memory capacity is 120 patterns, 999 segments per pattern, and each seg. Can be cyclied 999 times. 4, rs-232 communication interface, it can control / edit / record through computer. 5, all processes are precisely controlled by plc. If any part in machine is malfunction, the whole chamber will shut down and warning light will switch on. Chamber will shut down automatically in case of electrical power instabilities.

JOEO horizontal thermal shock test chamber,horizontal thermal shock machine,thermal cycling chambers,thermal cycle test chamber are ideal for batch testing and larger test loads. The chamber is designed for custom environmental stress screening of components and board level electronic components. The carrier basket transfers the load between the hot and cold zones in a two - or three-zone configuration. In the horizontal three zones, the product moves through the carrying basket between the cold zone and the environmental zone, and the hot zone moves to surround the carrying basket. A dual-effect thermal test systems (DTS) consists of three zones: a hot chamber at each end and a cold chamber in the middle. This design allows products to be moved between areas simultaneously through two product baskets - exposing twice as much product in one system to maximize your investment.

Thermal shock test chamber used to test the extent of the structure of materials or composite materials in an instant extremely high temperature and low temperature in a continuous environment in order to test chemical changes or physical damage in the shortest possible time caused by thermal expansion and contraction. Main parameters: Test method Pneumatic operated door switch 3 chambers Inner dimension (w*d*h) 500*450*450mm External dimension (w*d*h) 1380*1370*1980mm Temperature range -40 ~ +80 High temperature chamber pre-heating range 60 ~ 100 Heating speed +60+100 about 10 minutes Low temperature chamber pre-cooling range -65 ~ 0 Cooling speed Ambient -65 about 65 minutes Temperature deviation ±3 Thermal recovery time Within 5 minutes External material Antirust processing cold-rolled steel sheet Internal material Sus#304 stainless steel Thermal insulation material Polyurethane foam and fiberglass Coolant R404a / r23 Cooling method Air cooling Pressure 0.2 - 0.5mpa Power supply Three phase, 380v, 50hz Features: 1.Perfect appearance and easy to operate. 2.Japan lcd english microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs. 3.Three chamber structures, high temperature chamber, low temperature chamber and test chamber, control automatically, stay and switch time adjustable. 4.Perfect protection alarm functions: short-circuits, leakage, over temperature of work chamber; compressor over pressure, over load, short water?¦ 5.Control interface will display alarm reason and provide check methods, machine has emergency stop button. 6.Cold and hot shock temperature recover within 5 minutes, which complies with mtl, iec, jis, gjb and other international standards. 7.With rs-232c communication port for connecting pc to control, record and save test report.

Liquid Thermal shock test chamber Three Zone Thermal Shock Test Chamber Thermal Shock Test Chamber Liquid Thermal Shock Test Chamber,Cold and hot impact machine can be used to test material structure or composite material, in an instant by extremely high temperature and extremely low temperature continuous environment can endure degree, in order to in the shortest time test commits any heat bilges cold shrink caused by the chemical changes or physical damage. Applicable objects including metal, plastic, rubber, electronics, pv, solar... And other materials, the products can be used as a basis of improving or reference. Significant reductions in fluid usage make liquid thermal shock affordable Purchasing a liquid thermal shock chamber needs close consideration of the long term operating costs. The specialized liquids used can easily evaporate, causing the loss of thousands of dollars of fluid per year, if not properly contained. Liquid-to-liquid thermal shock testing is typically conducted to apply very strong, repetitive thermal stress to test pieces. It can model a product's ability to withstand thermally-induced size changes, crack resistance, hermetic integrity, and changes in electrical properties. This form of testing provides a very rapid temperature shock recovery of conditions, and it can significantly reduce testing time by requiring shorter soaks and less cycles. The liquid thermal shock chambers have been built to meet the demanding test requirements, which has become a defacto industrial standard for semiconductor devices.

-Brand: Labtek -Mode: LT-TS3 series -Volume: 70L ~ 300L -Thermal shock temperature range:-65°C+150°C -Temp constancy: within ±0.5 deg C -Temp tolerance: ±2.0°C High temperature zone -Pre-heat temp range: 60°C to 180°C -Rate of rise of temp: 60°C to 180°C within 60 min Ambient temperature zone Low Temperature Zone -Pre-cool temp range: -75°C+20°C -Cooling rate: +20°C -75°C Within 95 min -Recovery time: Within 5 min -More details, check with sales at labtek-inst dot com -Direct design and manufacture in Chinese factory, 1pc free design, customize at most competitive price.

-Brand: Labtek -Mode: LT-TS2 series -Volume: 50L ~ 1000L -Thermal shock temperature range:-65+150°C -Temp fluctuation: within ±0.5 deg C -Temp deviation: Within±2.0°C -More details, check with sales at labtek-inst dot com -Direct design and manufacture in Chinese factory, 1set free design, customize at most competitive price.

Our 3TS series thermal shock test chamber, it is just one chamber for the test room, it circulates cold and hot air through the pneumatic damper on the left and right sides. This design makes the external size smaller, and this 3TS series thermal shock chamber is pre-heated and pre-cooled to achieve faster test temperature. The test chamber can pre-record the programs so that customers can start test only click program numbers. Standard and custom models meet different requirements.

Stainless Steel Thermal Shock Test Chamber 1. Principles and methods   It uses the low temperature and high temperature storage hot trough, according to the movement need, uses the cylinder valve to switch the cold and hot air, thus achieves the fast temperature impact effect, balances the temperature control system (BTC) + the special design supply air circulation system, controls the SSR by the P.I.D. method, causes the heating amount of the system to be equal to the heat loss, therefore makes it long-term stable use.   2. Main Parameters   1. Performance: wind cooling type at room temperature ±25, no load.   (1) Impact temperature range: - 40 ~ 150   (2) Temperature setting range of high temperature cell: + 60 ~ + 200   The temperature rise time of the high temperature tank is about 35 minutes from RT (room temperature) to + 200 degrees (room temperature + 10 ~ + 30).   (3) The temperature setting range of cryogenic tank is from - 60 to - 10 .   The cooling time of the cryogenic tank is from RT (room temperature) to -60 , which takes about 90 min (room temperature + 10 ~ + 30 ).   (4) Laboratory temperature: - 40 - 100   (5) Temperature fluctuation: ±1 .   (6) Temperature uniformity: ±2 .   (7) Shock recovery time: - 40 ~ +100 takes about 3 minutes (no load), (high and low temperature shock isothermal time is more than 30 minutes each).

Three Zone Thermal Shock Test chamber Thermal Shock Test Chamber Liquid Thermal Shock Test Chamber Programmable Three Zones Thermal Shock Test Chamber is applied to aviation, military, ships, electrical, electronics, instruments and meters; medical equipment; civilian nuclear energy; colleges and universities; research laboratories; commodity inspection, arbitration, and technical supervision departments; building materials ceramic; petroleum and chemical products, For high and low temperature impact test. Three Zone models have higher performance, three-zone capability, and larger heating/cooling performance that fully benefits from Eco-mode innovations.Equipped with original Japan made true-color touch screen controller with software of both English and Chinese version.It consists of 3 Zones:1,High temperature Zone;2,Low temperature Zone;3,Testing Zone.Adopts unique thermal-break-structure class heating & cooling storage method,then leads hot or cold air to testing zone for thermal shock tests.It can be adjusted shock temperature by switching the hot and cold air flow. High memory capacity,can set 120 programs and each program can be repeated for max 9999 times.Each step can be proceeded for max 999 hours and 59 minutes.It's able to communicated with computer via RS485 port,so as to control,edit and record 2 groups of dynamic nodes,easy to operate.Proceeding with thermal shock conditions,users can select either 2 Zone or 3 Zone test mode.All operations are controlled by PLC.Equipped with automatic circuit and alarm signal in case of emergency,machine will be shut down in urgent situation. New Eco-Mode is standard for all models. Eco-mode manages the pre-conditioning and modulates refrigeration systems to reduce energy usage. Savings of up to 50% over previous models is possible, or as much as $2,000 a year. Two Zone models are lower cost models with only two-zone capability, lower performance, and partial savings of Eco-modGrande�??s Exclusive Touch-Screen

Model Number: L-BATH series Function: For testing small, middle, large sized battery Volume: 30L 1500L Temperature range:-70 180 C Humidity range: 20%RH~98%RH Hazard Level: Designed to meet the safety functions of EUCAR hazard level up to 6. Standards: Battery Test Chambers meet IEC, UL and a variety of other battery test specifications. Equipped with safety functions that protect again fire and bursting of the battery, including a Magnetic lock, pressure relief vent, forced exhaust and fire extinguisher.

Model Number: L-HH series Function: Temperature, High humidity Volume: 100L ~ 1500L Temperature range:-70 ~180 °C Ramp rate: 1 °C/min Humidity range: 20%RH~98%RH Main test points: 85%RH @ 85 °C, 90%RH @ 60 °C

Model Number: L-BT series Function: Temperature, humidity Volume: 40L ~ 64L Temperature range:-70 ~180 °C Ramp rate: 1 °C/min Humidity range: 20%RH~98%RH

Environmental test chamber, test chamber, salt spray test chamber, temperature humidity test chamber, thermal shock test chamber, temperature test chamber, high and low temperature test chamber, ip grade test equipment, battery test equipment, dry oven, battery short circuit tester.

-Brand: Labtek -Model Number: L-VTH series -Function: Temperature, humidity, Combined with Vibration -Volume: 500L ~ 2000L -Temperature range:-70 to 180C -Ramp rate: 1C/min,3C/min,5C/min, 10C/min,15C/min, -Humidity range: 20%RH~98%RH, 10%RH~98%RH for optional -More details, check with sales at labtek-inst dot com -Free design of Temperature Humidity Vibration chamber to cooperate with any existing vibration system -Direct design and manufacture in Chinese factory, 1pc free design, customize at most competitive price.

Model: lrhs-855-pl/lrhs-2551-pl Dimension of working room:950*1000*900mm/1280*1440*1870mm Overall room:1350*1400*1350mm/1520*1830*2100mm Swiping pipe radius:400mm/600mm Pipe diameter:18mm Orifice diameter:0.4mm Water jet :50~100kpa Distance between holes:interval 50mm a nozzle Sample frame speed:1~3±1r/min Swing tube swinging degree:±45°, ±60°, ±90°, ±180° Power:2.5kw Power supply requirement:ac220v±10% 50±0.5hz

Model Dimension of working room Overall dimension Power Lrhs-512-ps 800*800*800mm 1280*1260*1770mm 2.5kw Lrhs-800-ps 800*1000*1000mm 1280*1460*1970mm 2.5kw Lrhs-1000-ps 1000*1000*1000mm 1480*1460*1970mm 2.5kw Lrhs-1500-ps 1000*1500*1000mm 1540*1960*2100mm 2.5kw Time setting range:1~999h adjustable Air speed:not exceed 2m/s Lowing dust method:continous, period blowing dust time setting is optional Sand and dust concentration:2~4kg/m3 Test dust:dry talcum powder, silicate cement, smoke ash, etc. Dust heat:use stainless steel mica heating coil constant control to prevent dust adhesion Vibration time:1~99h59m59s Power supply requirement:ac380v±10%50±0.5hz

Thermal Coal $200.00 per MT X12 months, trial shipment 10,000 MT to 50,000 MT, and monthly shipment maximum 50,000 Coking Coal $156.00 per MT X12 months, trial shipment 10,000 MT to 50,000 MT, and monthly shipment maximum 50,000 Steam Coal $$126 per MT X12 months, trial shipment 10,000 MT to 50,000 MT, and monthly shipment maximum 50,000 I have contact with Indonesia coal seller as well and its price for Steam Coal is $215 per MT We also have Manganese Ore as well Once I got your contact information, I will send you the Specification, selling procedures, and or SCO to you for your review

Temperature only test chamber/High and low temperature test chamber Temperature Only Test Chambers High And Low Temperature Test Chamber Temperature chamber models designed to save lab space The Temperature chamber series provides an economical and space-saving solution for a variety of temperature testing requirements. Lowest temperature: -20 or -70�C (-4 or -100�F) Highest temperature: 180�C (354�F) The extended temperature ranges of the Standard series make testing at extreme conditions possible without buying a larger, stand-alone chamber. Two chamber sizes are available, as well. The programmer includes a temperature alarm as just one part of Grande's three-tiered over-temperature protection system. A thermal fuse and a user-set independent limit are also included. In addition, a specimen power terminal allows the user to safely operate powered equipment inside or with the chamber. Features High performance and quiet operation (65 dBa) Space-saving footprint, designed for flush installation to wall Stainless steel exterior Full thermal break around doorframe One 50mm (2") or 100mm (4") diameter cable port on left, with flexible silicone plug Three levels of overheat protection, plus overcool protection Easy lift-off service panels, electrical access on left Detachable eight-foot power cord with plug ETL listed electrical panel conforming to UL 508A Touch-screen programmer/controller with Ethernet Save 120 profiles with up to 1200 steps each (ramp, soak, jump, auto-start, end) One event relay for external device control, plus specimen power interlock relay for safety Grande exclusive options include: Web Controller for full remote access; Chamber Connect software for basic data logging and monitoring. USB and RS-232 ports available, as well.