2-zone thermal shock chamber consists of two chambers, one is hot chamber and one is cold chamber. Rapid sample elevator transfers between cold chamber to hot chamber to achieve temperature shock test. Thermal shock chambers are available in a variety of sizes and configurations to meet specific test requirements.
Goods lifts The iso-max is a goods only lift with two fixed cabin areas of 1, 00 x 1, 40 m (capacity 300, 500, 750 and 1000 kg) or 1, 275 x 1, 50 m (capacity 750 and 1000 kg) and a variable cabin height from 1, 20 - 2, 00 m. Lift unit complies to eu-directive for machines and has a eu-declaration of conformity of german t_v hanover / sachsen-anhalt e.V. Compared to a similar hydraulic freight elevator the iso-max will offer you some significant advantages and savings: Corrosion-proof Self-supporting galvanized steel structure Shaft pit depth 270 mm only Machine room less lift Accessible spaces underneath the shaft possible Easy mounting steel shaft cladding deliverable (no fire protection) Space saving installation - compact construction Pre-assembled for easy installation No brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors Manual operated hinged doors, made of galvanized steel in accordance to din 18090, production controlled by t_v-authorities With side frames made of galvanized steel according to drawing Door locks type-tested by t_v-authorities Machine room door Double hinged door with sash lock With side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor ip 54 disc brake and hand wheel, 3 x 400 v /50 hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control with 24 v, safety circuit 230 v Pre-wired with plugs Adjustable and time-limited despatch delay device (1-5 s) Electronic overload contact Acoustic arrival signal Position indicator on each entrance Thermal motor protection as main switch pre-wired on control panel Machine room light with socket
Goods lifts ISO-MAX Capacity: 300 / 500 / 750 / 1000 kg The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity 750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m Lift unit complies to EU-Directive for machines and has a EU-Declaration of conformity of German T_V Hanover / Sachsen-Anhalt e.V. Compared to a similar hydraulic freight elevator the ISO-MAX will offer you some significant advantages and savings: corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Machine room door double hinged door with sash lock with side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller call and send control with 24 V, safety circuit 230 V pre-wired with plugs adjustable and time-limited despatch delay device (1-5 s) electronic overload contact acoustic arrival signal position indicator on each entrance thermal motor protection as main switch pre-wired on control panel machine room light with socket ISO-PM 1000 Capacity: 1000 kg Goods lift along directive 95/28/EG with max. 2 persons corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only cabin push button with send control - landing push buttons with call and send control machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) reducing of interference prone by setting a safety feature instead of cabin door space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffet 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides safety light curtain cabin light - cabin ventilation type tested safety gear special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call special safety gear (type tested) special cabin apron (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Maintenance room door hinged door with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control Cabin push button with send control Landing push buttons with call and send control Micro-processor technique in controller cabinet Selector with absolute encoder
ROTARY FEEDER FOR BUCKET ELEVATOR BOTTOM ASH XG-100(300X300) Steam turbine parts is a research and development, production, sales, import agents in one of the manufacturing and processing enterprises. Our company was established in 2004. For more than 20 years, our company's products are widely used in electric power, petroleum, chemical, environmental protection, refractory materials, metallurgy, fire fighting equipment, natural gas, electronics, nuclear industry and other fields. Our company is willing to work with colleagues from all walks of life at home and abroad wholeheartedly cooperation to create a better future power plant, steel spare parts are as follows: can offer many spare parts for power plants as below: DF-ROTARY FEEDER FOR BUCKET ELEVATOR BOTTOM ASH XG-100(300X300)-DF sensor lvdt B152.33.01.01(2) temperature probe sensor WZP2-235 Liquid level transmitter LS15 S3F560A Gear speed sensor CS-3F-M16 1-L20 thermal resistance testing WZPK2-213 PT100 thermocouple replacement WRNK-221 platinum rhodium thermocouple wire WRNK2-331T lvdt displacement sensor 5000TDGN-30-01-01 LVDT Displacement Transducer Sensors HL-3-20-15 heating tube element HY-GYY-2.4-380V liquid level gauges 617279-SFQZQ13 linear displacement transducer TDZ-1-44 differential pressure switch 4NN-K5-N4-B1A linear variable displacement transducer ZD-7000TDA transmission speed sensor CS-3-M16-L185 stainless steel Thermocouple DZ3.1.2.7-1992 LVDT Measurement TDZ-1E-42 lvdt working principle C9231015 temperature sensor pt100 WZPK-646 Position indicator 6DR5220-0EN00-0AA0 displacement sensor 2000TDGN-15-01 Thermistor Sensor WZPK2-233 tachometer rpm D421.51UI heater cartridge JHG03SZ-380/6KW displacement transducer K156.36.06.005 Thermocouple Control TKWRE2-230T �?6 lvdt 0-300 ZD-4000TDA linear displacement transducer TDZ-1-04 displacement sensor sany ZDET-400B thermocouple wire TE-109 LVDT Displacement Sensors 7000TDZ-A Gear tooth sensor CS-3-M10-L120 type k thermocouple TE-104 LVDT Sensor TDZ-1E-013 3 wire rtd WZPM2-001 �¦6 lvdt sensor LVDT-150-3 DFYL-2023-4-14-MY
