Testing equipments, testing equipments manufacturers, testing equipments suppliers in saudi arabia
Vibration test chambers are versatile equipment designed to carry out vibration tests by following international standards. Custom build shaker testing machine to perform specific temperature, humidity, and vibration tests. And also to improve the reliability of test equipments
1. Application Ultraviolet aging test chamber uses ultraviolet lamp as light source. By simulating the ultraviolet radiation and condensation in natural sunlight, accelerated weatherability test of materials is carried out to obtain the results of weatherability of materials. It can simulate the environmental conditions such as ultraviolet, rain, high temperature, high humidity, condensation and darkness in natural climate. By reproducing these conditions, it can merge into a cycle and let it automatically execute the number of cycles. 2. Standards Conforms with ASTM G 153, ASTM G 154, ASTM D 4329, ASTM D 4799, ASTM D 4587, SAE J2020, ISO 4892, all current UV aging test standards. GB/T14522-93 National Standard of the People's Republic of China--Accelerated Test Method for Plastics, Coatings and Rubber Materials for Machinery Industry Products-Artificial Climate GB/T16585-1996 National Standard of the People's Republic of China-Test Method for Artificial Climate Aging of Vulcanized Rubber (Fluorescent Ultraviolet Lamp) GB/T16422.3-1997 standard design and manufacture of plastic laboratory light source exposure test method. 3. Product Parameters Standard Configuration Editor For Test Box (1) Install 8 UV ultraviolet lamps on both sides of the studio. (2) Sample holder number: 20 pieces. (3) Sample holder size: 404 x 105 (mm) (4) The heating mode is inner tank water heating, fast heating and uniform temperature distribution. (5) The drainage system uses the return vortex type and U type sedimentation device to drain the water. (6) The distance between the surface of the sample and the ultraviolet lamp is 50 mm and parallel. (7) The actual workroom is made up of test samples and brackets. (8) Internal water level automatic replenishment. (9) The box cover is bidirectional flip type, easy to open and close. (10) The bottom of the test box adopts high quality and fixed PU wheel. 4. Power Supply Condition Editor Power requirements: AC380V ± 10% 50 ± 0.5Hz three-phase five wire system. Preinstalled power: total power +2.0KW Users are required to install air or power switches for the equipment at the installation site.
The GF302D1 three phase portable energy meter test equipment consists of an integrated three phase current source(up to 500V/120A or 500V/20A) and built-in three-phase electronic reference standard of accuracy class 0.05%. Characteristic features of the GF302D1 are its wide measuring range, high accuracy and high tolerance to unwanted external influences. The equipment offers high functionality combined with an excellent menu guided operation via built-in keyboards and colored 7" touch LCD-display. Voltage & current harmonics output from 2 to 63 times. This model portable meter test equipment can be programmable by PC, automatic generation of energy meter error test report.
Professionals demand accurate and reliable testing equipment to trace problems, maintain critical processes and help resolve problems before they disrupt workflow or put the facility at risk. We have a wide inventory of test equipment that features the latest developments of the industry that technicians, engineers and electricians rely on every day. We have Digital multi meter, clamp meters,power quality meters,calibration tools,test tools and combo kits,air quality meter and hundreds of more products to analyze and solve problems
Mainly used in electrical performance auto test and resuit record of solar mono-si , poly-si or a-si cell module. 1, flash impulse continuous adjustable range 10~100ms 2, four lines measure;14-bit 4 channel high-speed synchronous collection card 3, 8000 dates collection points 4, irradiance automatically compensation;temperature automatically compensating 5, voice counts off and prompts;counting prompts of flash time 6, 24 continuous working , xeop lamp have 300, 000 times flash 7, touch-screen control. Ffective test area:2000*1200mm/5w~300w Effective test range:5w~240w Measuring voltage:0~100v( resolution ratio 1mv) Measuring current:0~20a( resolution ratio 1mv ) Test parameters:isc, voc, pmax, vm, im, ff, eff, temp, rs, rsh
ZDS series beer test equipment is consist mash system and fermentation system. They are connected with pipes.The mash system contained boiler tank, mash tank, filter tank, boiling tank, whirlpool tank and heat exchanger. They are connected with pipes. There is a raw material feed pipe between the boiler tank and mash tank; Fermentation system contained 6-8 fermentation tanks, between the fermentation tanks, there are wash and sterilization pipe, material pipe, coolant returning pipe and co2 pipe. At the same time, each fermentation tank attached a JMC-1 size yeast concentration detector which achieves the advanced international level 1 SET
Soil Testing Equipment Digital Triaxial Testing Machine. Autolevel Consolidometer. Bishop pore pressure apparatus. Coarse Sieves. Cone Penetrometer. Consolidation Test Apparatus. Constant Oil and Water Pressure Apparatus. Digital C.B.R. Apparatus.
Application: This TP-6A water content tester adopts the global recognized classical moisture testing method - Karl Fischer Coulometric Method which is the most accurate method with low cost. With the universal standard and analyzing method, it can quickly analyze the moisture content in liquid, solid and gas and directly display testing results, with testing range from 0.0001%(1ppm) to 100%. Therefore, this testing method has been widely used in institutions and enterprises of petroleum, chemical industry, power, pharmaceuticals, pesticide, railways, research, etc. The whole testing process is automatically controlled by this tester itself. Its auto-stirring and analyzing would be finished within 60seconds, and results would be displayed directly. Totally closed titration system avoids damage to operator from reagent. Equipped with 500ml Karl Fischer Reagent, which could test about 1000 times sample continuously, completely avoiding big deviations of other moisture testing method and thus improving quality index of products.
PV Module Test Equipment Mechanical Load Test Apparatus of Crystalline silicon terrestrial photovoltaic (PV) modules Reference Standard: IEC 61215 Crystalline Silicon Terrestrial Photovoltaic (PV) Modules Size: 6425mm*2000mm*3490mm Samples: 1643mm*991mm~2009mm*1027mm (Customized) Source: Sandbag Load: 2400Pa 5400Pa 8100Pa 10000Pa(Customized) Precision: + 3% Power: 380V/50HZ 3000W Weight: 4500kg Yuanchen supply nonstandard metal stamping, sheet metal working, sheet metal fabrication, laser cutting service, safety glass testing equipment, metal bracket, sheet metal bending, sheet metal forming etc. Customized OEM service and Free Sample Confirmed.
Water solubility dissolvable frac plug is a total new block-off downhole tool developed from conventional bridge plug. It organically mixes the patent soluble material, polymer degradable material and high strength ceramic technology, thus gets an outstanding performance of mechanism, solubility and degradation for the multi-staged fracture operation in the oil and gas well. The body of dissolvable frac plug applies miscellaneous soluble metal materials, as well as that the rubber applies polymer degradable material; The dissolvable packer has 70Mpa pressure strength. According to different working condition, the dissolvable packer has tailored formula for different solubility time in order that releasing the reservoir block of horizontal well and highly deviated well automatically. Characteristics - Made of compound high strength soluble metals, guarantee the material strength under high temperature. - Customized formula and the solubility time is flexible. - Special high strength compound slips(max. Strength 1250Mpa), it is stable to long 15 days. - Special cracking technology - Good compatibility and inheritance, unnecessary to change existing strings structure, no risks resulted from drilling out and reduce the damage of casings.
Introduction These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc. These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar. The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system. Advantages - Standstill of the pump when reaching the set final pressure - No energy consumption in case of long pressure holding times - No dissipated heat during the pressure holding phase - Substitute of leakage by automatic re-delivery through the pump - Regulator to control inlet air supply - High pressure bleed valve and high pressure outlet - Simple air-driven pump - Test in the field or in the shop - Simple installation, operationally reliable, easy to maintain
Gas Cylinder External Measuring Testing Machine Our vast inventory of quality high pressure hydrostatic pressure testing equipment ensures we have the system you require. Suncenterâ??s hydrostatic pressure testing systems are safe and easy to operate for a vast variety of liquids and gases. Hydrostatic Pressure Testing Equipment Our vast inventory of quality hydrostatic pressure testing equipment ensures we have the system you require. Suncenters hydrostatic pressure testing systems are safe and easy to operate for a vast variety of liquids and gases. In addition to our standard equipment, we design and build custom hydrostatic pressure testing equipment to your specifications. Suncenter is a stocking distributor of all components in our systems enabling us to build a cost-effective, reliable system fully customized to your needs. A wide variety of safety devices are available with any of ourhydrostatic pressure testing equipment to ensure maximum safety for all of your operating personnel. Suncenters experienced engineering team is also available for on-site consultations as well as start-up services should you need.
Valve Test Equipment Valve test equipment can be used for a variety of applications, such as intermediate and final inspections by valve manufacturers, testing of new valves on delivery, and routine or post-maintenance testing of valves in service. These include, for example, pressure testing of valve housings, leakage testing of valve seats, and set pressure testing of safety valves. Other components can also be pressure tested, such as tanks, motor housings, pump housings, pipe fittings, insulators etc. Special clamping devices may be required to clamp these test pieces. Structure and working principle Valve test equipment is composed of hydraulic system, electrical control system, high and low pressure water pump pressure supply device system, oil pressure, water pressure instrument system, control valve system, clamping workbench system and hydraulic medium storage circulating water tank. The test process and results meet relevant regulations and requirements. The valve test equipment adopts flange end face sealing, holding pressure claw to directly clamp the valve, and the back of the flange is compressed. The clamping mechanism is directly driven by the clamping oil cylinder of the clamping claw. The axial direction of the clamping claw can move forward and backward, which is not limited by the thickness of the flange. The radial movement is composed of oil cylinder and lever to realize the radial synchronous movement of each clamping jaw. The radial clamping jaw can move forward and backward. It is not limited by the diameter of valve flange. There is no external force on the test valve. The left end of the test bench can move horizontally left and right, and the pressure test is not limited by the structural length of the test valve; The right end can be turned over 90 degrees to facilitate the sealing and air tightness test of the valve. The high-pressure water pump is powered by the 4-7 bar air pressure system and automatically reverses through the electrical control reversing valve to make the high-pressure water pump work automatically and reciprocally. The water suction check valve and water outlet check valve are interchanged to continuously supply pressure to the tested valve to meet the pressure requirements of the tested valve. It is applicable to the high-pressure water seal test of 1.1 times the nominal pressure, the high-pressure water shell test of 1.5 times the nominal pressure and the low-pressure air tightness test of 4-7bar for flange valves.
Burst testing equipment is specialized machinery and systems used to subject materials, components, or products to extreme pressure conditions to determine their resistance to rupture or bursting. This type of testing is crucial in industries where safety and reliability are paramount, such as manufacturing, aerospace, automotive, and more. Features of Burst Testing Equipment Pressure Generation: Burst testing equipment is designed to generate controlled and precisely measured pressures. This can be achieved through hydraulic, pneumatic, or other specialized systems. Pressure Monitoring: The equipment is equipped with sensors and gauges to monitor the pressure applied to the test specimen in real-time. This allows for accurate measurement of the point at which rupture occurs. Safety Measures: To ensure safe testing procedures, burst testing equipment often includes safety mechanisms such as pressure relief valves, emergency stop buttons, and protective enclosures. Data Collection: Modern burst testing equipment is often connected to data acquisition systems that record pressure values and other relevant data during the testing process. Test Specimen Holders: The equipment provides fixtures or holders to secure the test specimen in place during testing. These fixtures prevent movement or displacement that could affect the test results.
Model: DL3020, Stroke mm: 300 * 200 * 200, Boundary dimension mm: 625 * 777 * 1080, Workbench mm: 460 * 360, Total weight (kg): 280KG, Glass bearing capacity (kg): 15, Z-axis lifting distance: 200MM, Working distance: 90 mm, Measurement accuracy UM: XY (3+L/200) um, Resolution of grating ruler: 1um, CCD resolution industrial grade: 800 line high-definition, Zoom objective magnification: 0.7-4.5X, Total magnification: 20-180 times, optional 20-220 times, Object field of view: 7-1.1MM, Surface light and contour light of the light source: white LED, with continuously adjustable brightness, Power supply: 220V �± 10%, 50 Hz. Electrical equipment requires reliable grounding: the grounding resistance is less than 4 ohms, Working environment: temperature 20 â??�± 5 â??, temperature change ï¼? 2 â??/hr, humidity 30-80%, vibration ï¼? 0.002g and lower than 15Hz, Imager characteristics: Utilize optical principles for non-contact measurement; Suitable for all fields with the purpose of two-dimensional measurement; It is the best measurement solution for small, thin, soft, and component parts; Accurate measurement can be achieved for elements such as points, lines, circles, angles, etc; And it has powerful report output function, high-quality, economical, and practical; Ultra high cost-effectiveness with all functions of flat measurement. imager: measure all plane dimensions; Hardware, main features: Fully cast aluminum worktable, column combination lightweight body. Precision transmission equipment design for fast movement. Precision P-level linear guide rail and V-shaped guide rail, with extremely high straightness, Ensure machine accuracy and service life. Sony Color CCD from Japan, with higher definition measurement images. Flexible lighting with contour light, surface light, and coaxial light (optional), high clarity, and unparalleled measurement accuracy. High precision optical ruler, every 1 micron is crucial.
Equipment Description Test rig for rotation testing on seating furniture according to EN 1335, EN14073-2, DIN 38878 and BIFMA X5.1, load controlled with loading pad. The pneumatic test axis operates from PLC. GENERL SPECIFICATIONS Machine Dimensions: (W x D x H) 1680*890*1840mm Power supply source: single-phase, AC220V±10%, 50/60Hz (can be appointed) Gross Weight: 400kg STANDARD FEATURES Framework 1 framework with traverse member and base plat 1200mm �1200 mm , 12mm thick, galvanized steel Rotation test axis 1 electromotive test axis for the rotation of the turning knob, position-controlled, rotation angle +/- 360° Pneumatic test axis 1 pneumatic test axis for seat, load controlled, position diameter 80mm, stroke 500mm Load Load up to 1900N, 2 � Load Cell 2KN. Load is transmitted vertically to the seat with lateral adjusting range Limit Control Operating pressure and cylinder limit switch control Emergency Button 1 emergency button Number and Cycles Can be set by PLC ( 0- 99,999) Accessories (Optional) 1 load pad diameter 200mm DIN EN 1335
Overview: The RT6103B Multi-function single phase energy meter test instrument adopts internationally advanced new-generation digital power source technology, integrates all the technological advantages of both domestic and foreign watt-hour meter calibration software, and is introduced to global market by Rowwin Test in a powerful and sensational way. The Multi-function single phase energy meter test instrument comprises of PWM power source, standard digital energy meter, error processor and PC processing software, this energy meter test instrument can test 3 to 60 various watt-hour meters of Grade 0.5 or lower simultaneously, also is an ideal new-generation multi-position energy meter testing instrument. Technical Parameters: 1. Accuracy class: 0.1/0.05 2. Reference standard energy meter£ºSingle phase wide-measurement range standard energy meter(Accuracy class:0.1/0.05), Multi-path voltage transformer: Accuracy class:0.01;Rated load per path:10VA. 3. Voltage range:220v(240V option),Output range:0~125%,Resolution:0.01%full range. 4. Current measurement range:0.1~100A(200A option),Output range:0~120%,Resolution:0.0001A(minimum). 5. Phase angle:0~360¡ã,Resolution of phase angle setting:0.01¡ã. 6. Frequency:45Hz~65Hz,Resolution:0.01Hz. 7. Output waveform distortion: Both voltage and current
Overview: The RT6303-S Three Phase Energy Meter Test Instrument(Split Type) adopts internationally advanced new-generation digital power source technologt,integrates all the technological advantages of both domestic and foreign watt-hour meter calibration software, and is introduced to global market by Rowwin Test in a powerful and sensational way.The Three phase energy meter test instrument¡¯s power source uses MCU single chip microprocessor as its core technology and adopts various techniques as digital synthesis,digital frequency modulation,digital amplitude modulation,digital phase-shifting,pulse width modulation and so on to bring you such important features as high reliability and good load characteristics.Its more humane and intelligent meter calibration software makes it possible for an ordinary,heavy and boring calibration to be carried out more easily and efficiently. Technical Parameters: 1. Accuracy class: 0.1/0.05 2. Reference standard energy meter: Three phase wide-measurement range standard energy meter,Accuracy class:0.1/0.05 3. Output voltage: 3* 57.7/100/220/380V Y/¡÷,0~120%Adjustment fineness:0.01% full range,adjustable phase by phase 4. Output current: 3* 0.1~100A(200A also available),0~120%Adjustment fineness:0.0001A(minimum),adjustable phase by phase 5. Phase shift:0~360¡ãAdjustment fineness:0.01¡ã,adjustable phase by phase 6. Frequency:45Hz~65Hz,Adjustment fineness:0.01Hz 7. Output waveform distortion:Both voltage and current
Optional accessories Cable port: two size of cable port is available: diameter: 50mm, diameter:100mm. Double door Pass room: provided to avoid disturbance of atmospheric temperature and humidity while opening the door. Floor reinforcement: can be fixed if heavy specimen placed in the chamber for test. Carry-in inclined platform: provided below the door to facilitate moving of specimens in and out through the door. normal running, a malfunction running or stand by occurs. Water purifier
