Product Description MOQ: 1 Set Certificate: ISO/CE/SGS Warranty: 13 Months Packaging: by Plywood case Payment: T/T, Western Union, Credit card. Transaction method: EXW, FOB, DDP, CIF, CFR Delivery Time: Within 10-15 working days after received deposit.
Hydraulic Pressure Testing Machine A hydraulic pressure testing machine is a device used to test the strength and integrity of various components and systems by subjecting them to hydraulic pressure. These machines are commonly used in industries such as manufacturing, automotive, aerospace, and oil and gas. The purpose of a hydraulic pressure testing machine is to simulate real-world conditions and determine if a component or system can withstand the specified pressure without failure or leakage. The operation of a hydraulic pressure testing machine involves the following steps: Preparation: The component or system to be tested is securely mounted in the test chamber or fixture. Proper connections, seals, and safety measures are ensured. Pressure Setting: The desired pressure level is set on the control panel. The pressure control system adjusts the hydraulic power unit to achieve and maintain the specified pressure. Pressurization: The hydraulic power unit generates hydraulic pressure, which is then applied to the component or system under test. The pressure is gradually increased to the specified level and maintained for a specific duration, allowing for observation and evaluation. Testing and Monitoring: During the pressurization phase, the operator monitors the pressure readings on the control panel. Any abnormalities, leaks, or failures are observed and recorded. Pressure relief valves ensure the pressure does not exceed the specified limit, ensuring safety. Test Completion: Once the testing is complete, the pressure is gradually released, and the component or system is carefully inspected for any signs of damage or leakage. Test results are recorded for analysis and documentation. Hydraulic pressure testing machines can be customized to accommodate a wide range of testing requirements, including different pressure ranges, test durations, and specific testing standards. They are an essential tool in quality control, product development, and ensuring the reliability and safety of components and systems under high-pressure conditions.
pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.
Air Driven Liquid Pump The air driven liquid pump is pneumatically driven reciprocating piston pumps. These pumps are proportional devices that utilize low pressure compressed air to drive a larger diameter piston (area x pressure) that is linearly connected to a smaller hydraulic piston/plunger. Utilizing this ratio principle, higher hydraulic pressure can be generated. Materials of construction include standard all stainless steel wetted ends and polyurethane pressure seals. Specialized materials of construction and special seals are also available upon request. Compact and lightweight, this liquid pump requires no air lubrication and is suitable for water, oil and most chemical applications. Applications High pressure pneumatic liquid pumps are available in a variety of sizes for use in many industries including oil and gas, mining, construction, aviation, aerospace, automotive, biomedical, vegetable oil extraction, alternative energy, chemical, defense, food processing, hydraulic fracturing, and more.
DGG Series Air Hydraulic Pump Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated. Air Hydraulic Pump An air hydraulic pump is a device that utilizes compressed air to generate hydraulic pressure, which is then used to power various hydraulic machinery and tools. This type of pump combines the principles of both pneumatic (air) and hydraulic systems to create a versatile and efficient power source. Features of an Air Hydraulic Pump Compressed Air Source: An air hydraulic pump requires a supply of compressed air, typically from an air compressor. This air is used to pressurize hydraulic fluid, usually oil, within the pump's reservoir. Hydraulic Pressure Generation: The compressed air drives a piston or diaphragm inside the pump, which in turn pressurizes the hydraulic fluid. This pressurized fluid is then directed to hydraulic actuators, cylinders, or tools to perform work. Adjustable Pressure: Air hydraulic pumps often feature pressure adjustment mechanisms that allow users to control the output pressure. This adjustability is crucial for different applications that require varying levels of force. Multiple Fluid Compatibility: These pumps are designed to work with various types of hydraulic fluids, including mineral oil-based fluids and synthetic hydraulic fluids, making them versatile for different industries.
Chemical Injection Pump Chemical reagent injection system is widely used in the world oil production and processing industry. Using the Air / gas driven system to filling chemicals to the oil wells, gas wells and pipelines, restore the normal work of the oil (gas) well, also can be used for delivery of raw materials to the high-pressure reaction kettle quantitative. Liquid Injection Pump A liquid injection pump is a device used to deliver a controlled amount of liquid into a system or process. This type of pump is commonly utilized in various industries such as manufacturing, chemical processing, pharmaceuticals, and agriculture. It serves the purpose of accurately injecting liquids, often chemicals or additives, into a larger flow or system. Key features of a liquid injection pump include Precision Control: Liquid injection pumps are designed to provide precise control over the amount of liquid being injected. This is crucial in processes where accurate dosing is required to achieve specific outcomes. Accurate Metering: These pumps are built with mechanisms that ensure accurate measurement and delivery of the liquid. This accuracy is essential in scenarios where even slight deviations in dosage can have significant impacts. Compatibility: Liquid injection pumps are engineered to handle a wide range of liquids, from viscous chemicals to corrosive substances. They are often made from materials that can withstand the chemical properties of the liquids being pumped. Automation: Many liquid injection pumps are designed to be integrated into automated systems. This allows for consistent and controlled injections without the need for manual intervention. Versatility: Liquid injection pumps can be used in various applications, including water treatment, chemical dosing, fertilizer injection in agriculture, and additive injection in manufacturing processes. Types: There are different types of liquid injection pumps available, including diaphragm pumps, piston pumps, peristaltic pumps, and gear pumps. The choice of pump type depends on factors like the characteristics of the liquid being injected, the required flow rate, and the pressure conditions. Maintenance: Regular maintenance is important to ensure the proper functioning of liquid injection pumps. This includes cleaning, checking for wear and tear, and replacing any components as needed.
Oxygen Gas Pump An oxygen gas pump is a device used to transfer or deliver oxygen gas from a storage container or source to another location. These pumps are designed specifically for handling oxygen, which is a critical gas used in various applications such as medical oxygen supply, industrial processes, and scientific research. The working principle of an oxygen gas pump depends on the specific type of pump being used. Here are two common types of oxygen gas pumps: Reciprocating Piston Pump: This type of pump utilizes a reciprocating piston to draw in and compress the oxygen gas. The pump consists of a cylinder, a piston, and inlet and outlet valves. During the suction stroke, the piston moves away from the cylinder head, creating a vacuum that draws in oxygen gas through the inlet valve. On the compression stroke, the piston moves towards the cylinder head, compressing the gas and forcing it out through the outlet valve. Diaphragm Pump: A diaphragm pump for oxygen gas uses a flexible diaphragm to generate the pumping action. Compressed air or a motor-driven mechanism causes the diaphragm to move back and forth, creating suction and compression cycles. When the diaphragm moves away from the pumping chamber, it creates a vacuum that draws in oxygen gas. As the diaphragm moves towards the pumping chamber, it compresses the gas and expels it through the outlet. In both types of pumps, it is crucial to ensure the materials used in their construction are compatible with oxygen gas. Oxygen is a highly reactive gas and can pose a fire hazard if it comes into contact with certain substances, such as oil, grease, or flammable materials. Therefore, oxygen gas pumps are typically made from oxygen-compatible materials, such as stainless steel or brass, and designed to minimize the risk of contamination or ignition. Oxygen gas pumps may also include safety features like pressure relief valves, gauges, and filtration systems to ensure the proper handling and delivery of oxygen gas. These safety measures help prevent overpressurization, monitor pressure levels, and remove impurities that could potentially affect the quality and safety of the delivered oxygen. Compressed Air Driven Gas Booster Pump- DGA/DGD/DGT Series Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.
Air Driven Liquid Pump An air-driven liquid pump, also known as an air-operated diaphragm pump (AODD), is a type of pump that uses compressed air as its power source to transfer liquids. It is a versatile and efficient pump commonly used in various industries for applications such as transferring fluids, emptying containers, and dosing liquids. The working principle of an air-driven liquid pump involves the reciprocating motion of a diaphragm. When compressed air is introduced into one side of the pump, it pushes the diaphragm in one direction, creating a vacuum on the other side. This vacuum causes the liquid to be drawn into the pump through an inlet valve. As the diaphragm moves back in the opposite direction, it compresses the liquid and forces it out through an outlet valve. One of the advantages of air-driven liquid pumps is their ability to handle a wide range of liquids, including corrosive and abrasive fluids, viscous substances, and liquids with solid particles. They are also capable of dry running without damage, making them suitable for applications where occasional dry operation may occur. The benefits of using air-driven liquid pumps include: Versatility: Air-driven liquid pumps can handle various types of liquids, making them suitable for a wide range of industrial applications. Self-priming: These pumps can self-prime, meaning they can draw liquid from a lower level without the need for external priming. Ability to handle solids: The diaphragm design of these pumps allows them to handle liquids containing solids or particles without clogging or damage. Simple operation and maintenance: Air-driven liquid pumps have a relatively simple design, making them easy to operate and maintain. They are often constructed from durable materials, ensuring long-term reliability. Adjustable flow and pressure: The flow rate and discharge pressure of air-driven liquid pumps can be easily adjusted by regulating the air pressure, allowing for precise control of liquid transfer.
pneumatic gas boosters can provide pressures of up to 80Mpa (11,600 psi). These intensifiers are used for almost all known gases. These technically superior pumps offer high efficiency, low noise, low NPSH and reduced axial and radial forces. They also offer less wear than sliding vane pumps and higher efficiency than side channel pumps. The pumps are ideal for transfer systems and for loading and unloading vessels, railcars, trucks, etc
pumps are air driven at a drive air pressure of 2 to 10bar (29 to145 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve. pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios. model numbers reflect the pumps nominal pressure ratios while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.
