Blue Jay Electronic provide temperature & humidity logger solution, build on our temp. & RH controller can control environment condition and record the temp. vibration. The time interval is set by programming can be from 1 second to 2 hours. Use EEPROM s which can store up to 40,000 measurements. This could be one measurement every 30 seconds for 11 days for example. The control function with completed FUZZY algorithm provides very precise of temperature & humidity monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature curve by automatically. Display unit can show environment temperature and humidity as per configure by user. The user also can adjust environment condition very easily. Function & Feature ·DIN(48X48mm) or panel mounting ·High measurement indication and control accuracy 0.5?? and 3% RH ·Heat/Cool control and PID control mode ·All settings except time maintained permanently in non-volatile memory until changed by user ·Built-in digital filter reduce interfere ·Self calibration technology, keep stabilization ·Two line LED display show the data Independent, prevent dazzle, highly visible display ·Simple 4-Button user interface ·Switching power supply and low consumption ·Use large capacity relay ·RS 485 interface, easy to get raw data
Blue Jay Electronic provide temperature & humidity logger solution, build on our temp. & RH controller can control environment condition and record the temp. vibration. The time interval is set by programming can be from 1 second to 2 hours. Use EEPROM s which can store up to 40,000 measurements. This could be one measurement every 30 seconds for 11 days for example. The control function with completed FUZZY algorithm provides very precise of temperature & humidity monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature curve by automatically. Display unit can show environment temperature and humidity as per configure by user. The user also can adjust environment condition very easily. Function & Feature DIN(48X48mm) or panel mounting High measurement indication and control accuracy 0.5â?? and 3% RH Heat/Cool control and PID control mode All settings except time maintained permanently in non-volatile memory until changed by user Built-in digital filter reduce interfere Self calibration technology, keep stabilization Two line LED display show the data Independent, prevent dazzle, highly visible display Simple 4-Button user interface Switching power supply and low consumption Use large capacity relay RS 485 interface, easy to get raw data
Measurement Temperature Range:-50 ,100 (-58F,212F) Humidity Range:0 - 100% RH Measurement Temperature Range:-50 ,100 (-58F,212F) Humidity Range:0 - 100% RH Accuracy : Temperature:0.3 (32.54F) Humidity : 3% RH Power Supply: Power : AC220V Power Consumption: : ¡Â1VA Environment Work Condition : :-20,65 (-4F,149¨¬F) Storage Condition: : -40,85 (-40F,185¨¬F) Resolution Accuracy:0.1/0.1%RH Communication:RS485 MODBUS RTU Display : Programmable 1 Line LED Switch Display Memory Capacity: Up to 20000 data points Data Sampling Interval:1s to 9 h (user selectable) Safe Protection : : Voltage Tolerance : Input & Power Supply >2 KV Input & Output > 2 KV Power Supply & Output >1 KV insulation : >5 M¥Ø. SIZE: 89X1.89X3.15 inch G.W/N.W: 500g/400g per piece Dimensions: 48X48X80 mm.
Ld 9104 high accuracy temperature & humidity data logger has internal high-precision sensors for temperature and humidity measurements. This device stores maximum 65000 measuring data automatically with selectable sampling intervals from 1s to 24h. It is equipped with intelligent data analysis and management software for data download, graph checking and analysis, ect. It is designed with lcd, led indicators and buttons. Realtime readings and alarm informations can be displayed on lcd. The two leds flash in red, green and yellow colors to indicate the status of working and alarming. It’s easy to operate with the two buttons to browse realtime readings, start/ stop logging and power on/off, etc. Features: 1. Mini size, easy to use 2. Water proof ip65 3. High accuracy 4. Alarm function 5. Including smart software for data analysis 6. Real time monitoring 7. Record 65000 data 8. Lcd display Specifications: Temperature range:-30?~70?(-22?~158?) Accuracy:±0.5? Humidity range: 0-100%rh Accuracy:±2.0%rh Temperature resolution: 0.1? Humidity resolution: 0.1%rh Data port:usb Sampling rate: 1s~24hours selectable Power: 3v cr2450 battery Size: 92x35x20mm G.W: 60g Accessories: battery, holder, software cd, manual & giftbox package
Features: small volume and convenient installation, probe fault indicator, 220v power supply. Power consumption: less than 3w Measurement range:-30~+110¡ã c Accuracy: 1% Display eee ntc sensor failure (short circuit or open circuit) Power supply: 220v Dimension: 64(l) x31(w) Mounting hole dimension: 58.4(l) x 25.7(w) mm Display eee ntc sensor failure (short circuit or open circuit) Power supply: 220v Dimension: 64(l) x31(w) Mounting hole dimension: 58.4(l) x 25.7(w) mm
Usb temperature data logger, temperature recorder, temperature monitor, temperature and humidity data logger.OEM and ODM
Spaghetti, temperature and humidity data loggers, pu security shoes, automatic truck weighing scada systems.
Microcomputer temperature and humidity controller, temperature and humidity ( data ) logger, refrigeration unit electrical control box, digital thermometer, intelligent halogen leak detector.
Ld 9121 series temperature and humidity data logger has internal high-precision sensors for temperature or temperature and humidity measurements. There is no need to install any software to automatically generate a pdf report. The device stores maximum 16000 measuring data automatically with selectable sampling intervals from 1s to 24h. It is equipped with intelligent data analysis and management software for data download, graph checking and analysis, etc. This device is designed with lcd, led indicators and buttons. Real-time readings and alarm information can be displayed on lcd. The two leds flash in red, green and yellow colors to indicate the status of working and alarming. Its easy to operate with the two buttons to check data, start logging and clear data.
Data logger, temperature recorder, chart recorder, pressure recorder, humidity recorder, temperature data logger, pressure data logger, humidity data logger.
Temperature controller
Ht-2 Features: Simultaneously displays temperature, humidity and time with digital lcd. Displays dry, moist or comfort according to different temperature and humidity. Length of the probe is up to 3 meters that can fit for most environments. Displays time with alarm function. Can efficiently protect the sensor from sun and rain so as to reduce the measuring error and, it can also reduce the influence from directly contacting with frozen foods when the equipment is used in a refrigerator. Can be placed on the table, nailed on the wall or fixed on iron plate with powerful magnetic Iron. Technical parameters: Indoor temperature : -30~+50 Outdoor temperature: -50~+70 Humidity measuring range: 20%rh~99%rh Accuracy: temperature: 0.1; humidity:1% Power supply: one 7# alkaline battery (1.5v) when voltage is low, it will show low bat.
Lt-2, technical parameters:, 1.Temperature range:-50~+300 (-58¡§h ~+572¡§h ), 2.Distinguishing rate: 0.1¡ê¡§&161;¨¹100¡ê&169;¡ê0.5¡ê¡§¡ê&190;100¡ê&169;, 3.Accuracy: (0~60)&161;¨¤1, &161;¨¤5(other range), 4.Power voltage:dc 1.5v, 7alkaline battery, , functions:, 1. Max.Min.Temperature memory;, 2.Max.Min.Temperature setting and alarm;, 3.Data holding;, 4.Switch between and ¡§h .
At-2 Features: In and out dual-way temperature measuring function of clock display
Dp-100 1.Specification: ¨®installing size: Panel size:64¨¢31mm Hole-opening size: 58.4¨¢25.7mm ¨® operating environment: Environment temperature range:0, 60 Environment humidity range:20%, 85%(no condensate) ¨® main function parameters: Temperature measuring and displaying range¡êo-40, 110 Display resolution¡êo¡ê¼100 0.1; y100 1 Accuracy¡êo¨¤1 Display eee when sensor error(short or open circuit) Power supply¡êo220vac¨¤10%¡ê¬50/60hz Power consumption¡êo, 3w Sensor:ntc Safety level of the front panel:ip54 Operating temperature¡êo0, 60 Storage temperature¡êo-30, 75 Relative humidity¡êo20, 85¡ê£¤¡ê¡§no condensate¡ê© 2.Features: ¨® led displays measuring temp.Values, clear, direct and not affected by the ray. ¨® inlaid panel, 220vac power supply, easy to install. ¨® wide temp, measuring range and high accuracy.
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Ld 9100 series temperature and humidity data logger has internal high-precision sensors for temperature or temperature and humidity measurements. The device stores maximum 65000 measuring data automatically with selectable intervals from 1s to 24h. It is equipped with intelligent data analysis and management software for data download, graph checking and analysis, ect. This device is designed with lcd, led indicators and buttons. Realtime readings and alarm information can be displayed on lcd. The two leds flash in red, green and yellow colors to indicate the status of working and alarming. It’s easy to operate with the two buttons to browse realtime readings, start & stop logging and power on or off, etc. Specifications: Model no.: Ld 9101, ld 9102, ld 9103, ld 9104 TemperatureRange-30~80?(-22~176?) Accuracy±0.5? Resolution0.1?(0.2?) Humidity range --0~100%rh Accuracy-±3.2%rh±2.2%rh±2.2%rh Resolution0.1%rh Data port Usb Waterproof levelIp65 Display Lcd Sampling rate1 second ~24 hours selectable Records 65000 data SoftwareStandard, compatible with windows/vista?windows2000/2003?windows7?8?10 systems Power supplyBattery type1*cr2450 3v Dimension92mm*35mm*20mm Weight Approx. 60g
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Technical data: Oxygen flow:0.5-5L/min Oxygen concentration:95.5%-87% Output pressure: 40-70kPa Pressure relief mechanism operational at: 250kPa + 25kPa Operation nose Level
1. Current overload or line surge shutdown 2. High temperature compressor shutdown. 3. High pressure alarm shutdown. 4. Low pressure alarm shutdown. 5. Low oxygen cocentrator alarm. Oxygen concentrator: 0.5-5L/min Purity: 95%+_3% Working system Continuous Power Supply AC230V.50Hz/AC220V.60HZ AC120V.60Hz Power: 390VA Net Weight: 16kg( Gross weight: 18.5kgs) Warranty: Long-life compressor designed for 1000 hours of maintenance-free use. Size: 33*26*54cm
