(1) the spiral wound tube heat exchanger is highly efficient and saves energy (steam). Internal unique reverse winding spiral coil structure, heat exchange in a current way, make fully condensing steam in the heat exchange tube bundle, do not need a second heat exchange, so it can save a lot of steam; (2) spiral wound tube heat exchanger is stainless steel welding, it can bear high temperature and high pressure. Because the heat exchange tube bundle and shell are all made of stainless steel material, with uniform expansion coefficient, the maximum pressure is1.6 MPa, the highest heat-resistant is 400 â??,it will not cause deformation of the heat exchanger because of pressure and temperature; so there is no need to prepare the equipment to reduce the pressure and temperature. (3) its structure is compact, with small size, saving infrastructure investment; Lightweight and easy to install, the equipment can be connected directly to the pipe, reducing installation cost. (4) the heat exchanger with Michael's (OWEN) turbulent buffeting frequency standard principle, the heat exchange tube bundle adopts the minimum clearance design, effectively eliminates the turbulent chattering phenomenon, prolongs the service life of the heat exchanger. (5) the heat exchanger is low in scale with a low maintenance cost, with unique structure, unique surface treatment technology, and on both sides of the counterflow heat exchange medium, not only improving the integrated heat transfer coefficient but also with self-cleaning function and low scale tend. The method of chemical descaling can be used to clean the heat exchanger, which can save time, power, cost and effect.
Shell and Tube Heat Exchanger
Shell and tube heat exchanger is made to transfer energy from high fluid heat transfer to the lower temperature fluid, the fluid temperature can reach the indexes of the flow rules, so as to meet the needs of process conditions, as well as one of the main equipment of improving energy efficiency. The heat exchanger industry deals with nearly 30 kinds of industries, such as HVAC, pressure vessel, and medium water treatment equipment, which form the industrial chain. The Shell and tube heat exchanger industry in china has achieved remarkable results in energy saving and efficiency, increasing heat transfer efficiency, reducing heat transfer area, lowering pressure drop, and improving thermal strength of a plant. Based on petroleum, chemical, electric power, metallurgy, shipbuilding, machinery, food, pharmaceutical, and other industries to stable demand growth of the heat exchanger.
What is a spiral wound tube heat exchanger? Spiral wound tube heat exchanger, also known as threaded tube heat exchanger, turbulent heat exchanger, double bellows heat exchanger. It is a new type of shell and tube heat exchanger. Each heat exchange tube is evenly wound in the heat exchanger shell according to a certain rule. According to the different interface structure, it is divided into L type and Y type. According to whether it can be disassembled, it can be divided into detachable type and non-detachable type. Type: Y type,T type,detachable,double tubesheet, cold trap, gas-liquid separation etc. Material:austenitic stainless steel 316L, double-phase stainless steel 2205, 2507, pure titanium, zirconium, Hastelloy alloy, etc. Tube type:Spiral wound tube/parallel tube/U type tube Tube: �¦8ï¼?�¦10ï¼?�¦12, �¦14ï¼?�¦16,�¦19ï¼?�¦25etc. Maximum working pressure:4Mpa Heat exchanger area:0.1-1000 square meters working temperature:-20-300 degree celsius (customizable) Applicable fluids:steam, circulating water, frozen brine, glacial refrigerant, glycol;. installation type:Horizontal/Vertical Function:Heater, cooler, condenser, evaporate, distillation, rectification Application:Distillation reflux system, concentration system, distillation system, waste gas and heat recovery system, traditional Chinese medicine extraction system, instantaneous sterilization at high temperature, CIP cleaning system, civil HVAC system,heating and cooling of process materials Customization:According to the technical requirements of customers, we can accurately customize the winding tube heat exchangers with various spacing. Package:Standard export wooden box,can be packaged according to customer requirements. Advantages: 1.High heat transfer coefficient :Unique wound tube bundle optimizes the flow state of the fluid on both sides 2.Long service life spiral :The elastic tube bundle can effectively absorb stress and vibration, prolong the service life of the heat exchanger 3.Low scaling tendency :Thereâ??s no dead angle in the heat exchanger, and the tube side and shell side can be emptied; the high flow rate design of the shell side can effectively reduce the probability of scaling on the surface of the heat exchange tube 4.small floor space: Compact structure,about 1/5 of the traditional heat exchanger 5.Low operating cost : Under heat conditons ,it can save the steam ;under the condensation conditions,it can improve the recovery rate. � Shandong Qinglei Environmental Technology Co.,Ltd is an equipment manufacturer integrating design, production and assembly. Our products include heat exchangers, heat exchange units, pressure vessels, storage tanks, TCU temperature control systems, reactors, distillation towers, VOCS purification and recovery systems, vacuum frying machine. If you need any of them,please donot hesitate to let me know,I will reply you ASAP.
Heat exchanger, spiral wound tube heat exchanger, shell and coil heat exchanger, tubular heat exchanger, double tube heat exchanger, intelligent temperature control system, waste heat recovery system, tank.Import & export
A spiral heat exchanger refers to a pair of flat surfaces that are coiled to form the two channels in a counter-flow arrangement. Each of the two channels has one long curved path. The main advantage of this device is its highly efficient use of space.
Specifications Stainless steel pipe/tube 1.Grade:304, 304l, 316, 316l, 321, 317l, 310s, 904l and so on. 2. Standards: astm, jis, din, gb and so on. Standard export packing
Design Features & Benefits The spiral plate heat exchanger is made by rolling two long metal plates around a center core to form two concentric spiral flow passages, one for each fluid. The plate edges are welded shut so that each fluid stays within its own passage and there is no flow bypassing or intermixing. Channel plate width and spacing (gap between plates) are optimized for the specified duty, maximum heat transfer, and ease of access. The plate gap is maintained by welded spacer studs although some designs do not require them. Due to its inherent circular design and large surface area to volume ratio, the spiral heat exchanger offers unique advantages over other types of heat exchangers like the shell and tube. High Thermal Efficiency Single and long curving flow passages with a uniform rectangular cross-section ensure superior flow distribution, intense turbulence, and high heat transfer coefficients (50-100% greater than shell & tubes). Self-Cleaning Passages The spiral's single-flow passages induce high shear rates that scrub away deposits as they form. This self-cleaning effect reduces fouling and makes spiral heat exchangers ideal for handling tough fluids such as process slurries, sludge, and media with suspended solids or fibers. Countercurrent or Co-current Spiral heat exchangers normally operate in true countercurrent flow for close approaches and temperature crosses. Occasionally a co-current flow design has major benefits, especially in cooling or heating fluids prone to gelation, burn-on, freezing or similar skin temperature related fouling. Small Footprint & Easy Access The spiral heat exchanger is compact and requires minimal space for installation and servicing. Removable covers provide easy access to interior heat transfer surfaces for field inspections, routine maintenance, or manual cleaning if required.
Specifications Type : Automatic Material : Gun Metal, Mild Steel Certification : CE Certified Weight : 100-1000kg Voltage : 380V Power : 6-9kw Warranty : 1 Year Driven : Electric
Pushpak Are A Leading Manufacturer Of Heat Exchanger Tubes Cs-ss- Duplex-titanium And Condenser Tubes From Mumbai, India. Carbon Steel, Stainless Steel , Duplex Steel , Titanium Steel, Cupro Nickle Sa 179 / 304/316/321/ 347/ Ti Gr. 1 / 2/ 3 /2202/2304 / 90/30 & 70 /30a 210 Gr. A1/c /a 192 /a 334/ Carbon Steel, Stainless Steel , Duplex Steel , Titanium Steel, Cupro Nickle
Gireesh shell and tube heat exchanger is the most common type of heat exchanger designs. As its name implies, this type of heat exchanger consists of a shell with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) to transfer heat between the two fluids. The set of tubes is called a tube bundle, and may be composed by several types of tubes: plain, longitudinally finned, etc.
the cooling tube is made of cooper to roll fin outside individual box
My company is a professional supplier of high quality stainless steel heat exchanger tubes, finned tubes , u-tubes and copper alloys and titanium tubes in china, material grade include austenitic 304, 304l, 316l, 316ti, 310s, 317l, 347h, 321, 2205, 2507, s31803, s32750, s32760, t5, t11, t12, t22, a179, a209(t1), a333(gr6), a334(gr6) astm 338 grade 1 and grade 2. More information about my company please review our web: www.Fengtaiint.Com. My company has gotten iso2000 and ped97/23/ec certificates.
We produce shell and tube heat exchangers from carbon or stainless steel. Heat exchangers are thermal machines where the heat from one media is transferred to another. In practice, they are used for cooling oil, for steam condensation in central heating systems and as boilers for hot tap water. The heat exchangers can be made from steel or stainless steel. The pipes inside the heat exchanger are according to the TIG welding procedure welded to the flange of the heat exchanger. The heat exchangers are produced in various types: U-shaped, helical, with even pipes, conducting several parallel currents through the heat exchanger.
10 heat exchangers brand new for sale at 75 % discount due to cancelled project. Offered by one of the biggest Petrochemical plants in Saudi Arabia. The exchangers are located in Yanbu Industrial City , Saudi Arabia and ready to be shipped and used in a new project as an available opportunity. Save time, design and manufacturing costs.
Ss 316 Tube Type Heat Exchanger With Titanium Tubes In Ss 316 Grade
We at JC Equipments in coimbatore offer world class heat exchanger particularly shell type. We offer all types of shell and tube heat exchanger for all industrial applications. where ever the pressure and temperature is available its required our heat exchanger. In heat exchanger industry the most important type of usage in oil industries and chemical process. This shell and tube heat exchanger having two parts. One is Shell side and another one is Tube side. JC Equipments Offer the below types of shell and tube heat exchangers: JC Fixed Tube Sheet Heat Exchanger JC Removable Tube Bundle Heat Exchanger JC Vertical Shell and Tube Heat Exchanger JC Stainless Steel Shell and Tube Heat Exchanger JC U Tube Bundle Type Heat Exchanger
Murphy plate finned tube heat exchanger has some obvious advantages in operation, especially in the field of air to air heat transfer, especially in the field of ultra-high temperature air to air heat transfer. To a certain extent, it has become the upgrading product of the tube, heat pipe and finned tube heat exchanger. The main characteristics of Murphy plate finned tube heat exchanger: the finned tube heat exchanger can be designed with elastic structure, which can effectively solve the problem of its thermal expansion; there are rich test and actual operation data as support, through constant correction of the calculation formula, the calculation error is within 5%, and more than 95% of the equipment operation can reach the design parameters.
OD 15.88mm Heat Exchanger Tubing , Copper Finned Tube For Flooded Evaporator 1
Transense Heat Exchanger Tube , 25.4mm Air Conditioner Copper Pipes 1
