Sodium naphthalene formaldehyde is high range water-reducing and an anion surface active agent based on polyalkyaryl- sulphonate. Technical spefication: Solid content 92% min Moisture 8.0 % max Fineness 5.0% max Ph value 7 - 9 Chlorides content 2.0% max Surface tension 68-72 mn/m Cement flowing rate 230mm min Concrete reducing water rate 18% min Sodium sulfate content 18% max (5%max is also available) Sodium naphthalene formaldehyde produces concrete with extremely workable characteristics referred to as high slump. Pns also allows concrete to be produced with very low water/cement ratios at low or normal slumps.Sodium naphthalene formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation. Addition ratessodium naphthalene formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.Sodium naphthalene formaldehyde directionprepare solutions as required.Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each.
Sodium Naphthalene Formaldehyde (SNF-Superplasticizer for Concrete) CAS Code: 36290-04-7 SNF a high range water reducer, commonly referred to as a super plasticizer, also named Naphthalene Sulphonate Formaldehyde Condensate (short name: SNF, PNS, NSF, etcâ?¦) SNF is made from naphthalene, sulfuric acid, formaldehyde and liquid alkali, through sulfonation, hydrolyzation, condensation and neutralization reaction and then drying to powder. SNF-A5% contains very small chloride. Thus, it meets the requirements of chemical admixture specifications for concrete: ASTM Designation C 494 as a Type F admixture, GB8076-2008 and GB50119-2003. Usage SNF produces concrete with extremely workable characteristics referred to as high slump. SNF also allows concrete to be produced with very low water/cement ratios at low or normal slumps. SNF is ideal for use in pre stress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation. SNF will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired. SNF is compatible with Portland Cement, Normal Portland cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc.
Description YL-SNF-A is a high range water reducer, high concentration naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate (NSF), SNF, PNS and FDN etc. YL-SNF-A (Na2SO4 less 5%) contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable. Thus, it meets the requirements of chemical admixture specifications for concrete, complying with ASTM C 494, Type F. ASTM C 1017, GB8076-2008 and GB50119-2003 etc. Uses 1.YL-SNF-A possesses the features of no retarding, no air-introducing, superplastic high water-reducing and strength enhancing. It has no chloride, low alkali content, low sulphonate, and high purity. It can be widely used in different concretes with less dosage and easy to use. 2.YL-SNF-A can be applied to make flowing, strong or steam-curing concrete. The minimum working temperature can be as low as zero centigrade degree. In steam curing, concrete with superplasticizer has to be strong enough before heating. The steam curing specification has to be pre-tested. It is particularly used as base material for compound admixtures. 3.It can prevent from the alkali-aggregate reaction because of the biggish alkali reactivity of aggregate or the alkali-aggregate reaction in the moist environment. Advantage 1.High water-reducing rate: YL-SNF-A can reduce water 20-30%. It has features of superplasticizer, effectively increases concrete fluidity and reduces water penetration and segregation and improves the encapsulation force of the concrete with reinforcing steel bar. 2.Strengthening: Given the same amount of cement and slump requirement, this product with the dosage 0.5-1.2% can increase the concrete early strength and reinforced effect by 50-100%, 40-70%, 25-60% and 20-60% on day 1, 3, 7, and 28 respectively. 3.High applicability: It can be used with different variety of cement. It is compatible with other admixtures. 4.Low sodium Sulfate content: The aqueous solution has no crystals in winter, which can avoid pipeline congestions when JK-01 NP applied. It is suitable for automatic working. 5.Effective durability: It can modify the structure of concrete and increase the property of anti-seepage, anti-freezing, and carbonization. 6.Easy to use: It can be added directly or used after dissolved in water. It can be used for different working condition and concrete mixer. Specifications Items Criteria Actual results(C¡¨¢0.75%) Appearance -- Brown powder Solid Content % 92 min 92.65 Moisture % 8.0 max 7.35 Fineness (0.315mm remains) % 15.0 max 9.2 PH value 7 - 9 8.5 Sodium Sulfate Content % 5.0 max 3.8 Chloride Content % 1.0 max 0.11 Surface Tension 68-72 Mn/m 71 Cement Flowing Rate 240mm 265mm Water Reducing Rate 20% min 22.3% Steel-bar Corrosion None None Dosage 0.5-1.2% by weight of cement. Exact dosage rates depend on the type of effect sought, quality of cement and aggregates, water/cement ratio and ambient temperature. Therefore, in many cases it is advisable to carry out trial mixes. YL-SNF-A can be added directly or added in after dissolved in water. It can be added during mixing and after-mixing (better). The after-mixing approach can achieve better result. Test Data Sheet Items Dosage rate (Cx%) Water (g) Slump (mm) Water reducing rate (%) Compressive strength (MPa) /Compressive strength rate (%) 1 day 3 days 7 days 28 days Reference concrete 0 2555 82 0 4.34/100 13.70/100 20.19/100 24.06/100 YL-SNF-A 0.75 1986 89 22.3 7.63/173.3 23.85/173.4 30.84/150.7 33.72/137.2 Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg.
Sodium naphthalene sulfonate formaldehyde.
Concrete admixture, sodium naphthalene sulfonate formaldehyde, sodium gluconate, polycarboxylate superplasticizer.
Concrete admixtures, textile chemicals, fertilizer, ceramic binders, coal water slurry additives, polycarboxylate, sodium naphthalene sulfonate formaldehyde, sodium gluconate, sodium & calcium lignosulfonate.
Concrete admixtures: Sodium naphthalene sulfonate formaldehyde, Polycarboxylate ether superplasticizer, Sodium gluconate, Polycarboxy monomer.
Concrete admixture, concrete additive, sodium naphthalene sulfonate formaldehyde, polycarboxylate superplasticizer, sodium gluconate, mono ethylene glycol.
Sodium naphthalene sulphonate fdn- 1 used for and widely for self-cured, vaporcured concrete and its formulations. At the early stage of Application, extremely prominent effects are shown. As the result, the modulus and siteutilization Can be drastically, the procedure of vapor cureis omitted in peak-heat summer days. Statistically 40-60 metric tons of coal willbe preserved when a metric ton of the material is consumed. 2 suitable for preparation of early-strength, high-strength, high-anti-filtration and selfsealing& pumpable concrete.
YL-SNF-C(Na2SO4 less than 18%) Sodium Naphthalene Sulfonate Formaldehyde This product, named -naphthalene sulfonate formaldehyde condensate, is non-air entraining superplasticizer. It has good dispersing performance to the cement particles. Compared with traditional plasticizer, it has higher water reducing rate, and good for preparing mass concrete, fresh concrete required for early strength and high strength, and precast concrete and parts. It also has good adaptability to commonly used cement, and widely used in roads, bridges, dams, power engineering, civil construction, steam and natural curing precast parts and other projects. Advantage: * Higher water reducing rate. By the recommended dosage, the water reducingrate can reach 15% -20%. * Improve the workability of concrete, such as compression, long-term strength, flowability, etc., and enhance the reinforcement of steel and concrete. * Reduce costs. In the case of maintaining the same workability and strength, cement amountcan be reduced. * Wide adaptability, cost-effective. Good adaptability to all kinds of cement, such as Portland cement, slag cement, volcanic ash cement, etc. * Be mother material to formulate other admixtures.(like early strength, set retarder, pumping agent, antifreezing agent).
Concrete admixtures, textile chemicals, fertilizer, ceramic binders, coal water slurry additives, Polycarboxylate, sodium naphthalene sulfonate formaldehyde, sodium gluconate, sodium & calcium lignosulfonate.
Product Name:Naphthalene based superplasticizer/Sodium Naphthalene sulfonate/sodium naphthalene sulfonate formaldehyde condensation/sulfonated naphthalene formaldehyde/sodium naphthalene sulfuric acid formaldehyde CAS No.: 9084-06-4 HS No.:382440100 Chemical Formula:(C11H7O4SNa)n Payment:T/T Delivery:Within 15 days after payment. Raw materials:crude naphthalene,concentrated sulfuric acid,formaldehyde,liquid alkali Specification: Appearance yellow powderyellow powder yellow powder Solid content 92% min 92% min 92% min Sodium sulfate content 5% max 10% max 18% max Chloride content 0.3% max0.4% max 0.5% max PH 7~97~9 7~9 Fluidity of cement paste 250 mm min 240 mm min 230 mm min Package and Storage: Package:25 kg plastic bags with PP liner,Alternative package may be available upon request. Storage:Shelf-life time is 2 years if kept in cool,dried place.Test should be done after expiration.
YL-PL-WR Polycarboxylate Superplasticizer (Water reducing type, 40-50% solid content) * High water reduction, low dosage. The water reducing rate can reach 20%-40% with recommended dosage. * Early and high strength. The early strengthand 28 day strength have been obviously improved. * Low slump loss: complywith the pumping agent standard, slump loss would besignificantly reduced. * High durability: This product can effectively reduce the W/C ratio, improve durability. * It can be used as a mother liquor to produce other functional admixture, such as early strengthtype, retarder, pumpingconcrete admixture, antifreezer, etc.; * Environmentalfriendly products: the production does not pollute the environment; * Non-corrosionon steelbar.
Yl-sg Sodium Gluconate Set Retarder (industrial grade & food grade) YL-SG is a set-retarding admixture, and it can slow down the hydration of cement, prolong setting time, and extend the working life of concrete for long periods without any negative influence on the concrete quality. Performance: * Extend concrete initial setting time during hot weather. * Increasethe workable time of concrete up to several hours. * Provideflexibility in planning and scheduling of concrete pours. * Applicable for massive concrete, precast concrete and large area construction.
Description YL-SG is a kind of sodium polyhydroxy carboxylate. Its appearance is white or light yellow crystal powder. It is easily soluble in water, slightly soluble in alcohol, and insoluble in ether. It can be used as a retarder in concrete industry, or chelating agent in textile dyeing, metal surface treatment and water treatment industries, as steel surface cleaning agent, or glass bottle detergent. Performance Used as a cement additive: it can slow down the hydration of cement, prolong the setting time and extend the service life of concrete, no negative effect on quality of concrete in hot weather; Used as steel surface cleaning agent; Used as a special detergent for glass bottles; Other industrial fields such as electroplating, film manufacturing, etc.
Product Description High Range Water-Reducing Admixture Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture Uses Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Sulphonate Formaldehyde Specification: Solid Content :96.42% PH value :8.3 Chlorides Content :0.25% Sodium Sulfate Content :4.4%. For powder: woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg.
Sodium lignosulfonate, calcium lignosulphonate, sodium gluconate, potassium lignosulfonate, sodium naphthalene formaldehyde sulfonate, soda ash.
Product Description High Range Water-Reducing Admixture Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture Uses Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Sulphonate Formaldehyde Specification: Solid Content :93% PH value :8.42 Chlorides Content :0. 39% Sodium Sulfate Content :16% Addition Rates Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%. Sodium Naphthalene Sulphonate Formaldehyde Direction Prepare solutions as required. Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg. 25kg in PP woven bag lined with plastic film
Product Description High Range Water-Reducing Admixture Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture Uses Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Sulphonate Formaldehyde Specification: Solid Content :96.42% PH value :8.3 Chlorides Content :0.25% Sodium Sulfate Content :4.4% Addition Rates Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%. Sodium Naphthalene Sulphonate Formaldehyde Direction Prepare solutions as required. Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg. 25kg in PP woven bag lined with plastic film
Product Description: High Range Water-Reducing Admixture Sodium Naphthalene Sulphonate Formaldehyde, Poly Naphthalene Sulfonate Formaldehyde Condensate,Concrete Admixture Uses: Sodium Naphthalene Sulphonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Sulphonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation Sodium Naphthalene Sulphonate Formaldehyde Specification: Solid Content :96.42% PH value :8.3 Chlorides Content :0.25% Sodium Sulfate Content :4.4% Addition Rates: Sodium Naphthalene Sulphonate Formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%. Sodium Naphthalene Sulphonate Formaldehyde Direction Prepare solutions as required. Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Sodium Naphthalene Sulphonate Formaldehyde Package, Storage & Handling. For powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.1 kg.
