Sodium lignosulphonate is modified nature lignin product, taking on powder, having a little fragrance, no poisonous, no harmful. Have a good moisture absorption ability, water solubility and high chemical stability, fair absorbability, dispersion, and humidification and lubrication. Sodium lignosulphonate can be widely used in construction, ceramics, mineral powder, chemical industry, metallurgical industry, petroleum industry, fire-retardant materials, and cws dispersion agent. 1, in the filed of concrete admixture, sodium lignosulphonate can improve the workability and water of concrete, reduce the initial heat of hydration of cement, as the common water reducing mixture.2, sodium lignosulphonate can increase the output of the mill, maintain the normallization of the system, reduce the power consumption, and improve the thickness of coal water slurry. Sodium lignosulphonate can be adopted as the adhesives in the briquetting procedure in the vertical retort zinc smelters. In the agriculture, sodium lignosulphonate can be used in the production of deflocculant , dispersant and bulking agent of pesticide to improve the suspensibility and wettability of wettable powder. 5. Sodium lignosulphonate series products can be applied as the dispersant of pesticides and pelleting adhesives of fertilizers and feedstuffs. 6, sodium lignosulphonate can be used as the refractory material and ceramics Packing of sodium lignosulphonate:packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each. Storage: It shall be stored in cool and dry place
Magnesium lignosulphonate is a kind of natural anionic surfactant of high molecular polymer Main performance: Remain the same concrete mix to improve workability of concrete mixture. To maintain the same amount of cement and workability, increase strength and durability of concrete; To maintain concrete workability and strength of the same 28 days, lower water-cement ratio, cement saving. Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each.
Sodium gluconate is the sodium salt of gluconic acid..It is white or pale yellow crystalline granules or powder; quite easily soluble in water, slightly soluble in alcohol, insoluble in ether. Calcium gluconate is retardation water-reducing agent , powder and low-air-entraining, and it is a kind of nature anionic surfactant of high molecular polymer. Main performance: 1 , sodium gluconate can be used as water quality stabilizer because it has excellent inhibiting capacity to scale. 2, sodium gluconate is used as surface cleaning agent of metal and glass. 3 , sodium gluconate can be used as water reducing 4, in the medicine field, sodium gluconatecan keep the balance of acid and alkali in the human body, and recover the normal operation of nerve. 5, sodium gluconateis able to prevent effectively sodium-deficit syndromes from occ Packing of calcium lignosulphonate: Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each. Storage It shall be stored in cool and dry place
Sodium naphthalene formaldehyde is high range water-reducing and an anion surface active agent based on polyalkyaryl- sulphonate. Technical spefication: Solid content 92% min Moisture 8.0 % max Fineness 5.0% max Ph value 7 - 9 Chlorides content 2.0% max Surface tension 68-72 mn/m Cement flowing rate 230mm min Concrete reducing water rate 18% min Sodium sulfate content 18% max (5%max is also available) Sodium naphthalene formaldehyde produces concrete with extremely workable characteristics referred to as high slump. Pns also allows concrete to be produced with very low water/cement ratios at low or normal slumps.Sodium naphthalene formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation. Addition ratessodium naphthalene formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.Sodium naphthalene formaldehyde directionprepare solutions as required.Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each.
Poly naphthalene sulfonate formaldehyde is high range water-reducing and an anion surface active agent based on polyalkyaryl- sulphonate. Technical spefication: Solid content 92% min Moisture 8.0 % max Fineness 5.0% max Ph value 7 - 9 Chlorides content 2.0% max Surface tension 68-72 mn/m Cement flowing rate 230mm min Concrete reducing water rate 18% min Sodium sulfate content 18% max (5%max is also available) Poly naphthalene sulfonate formaldehyde produces concrete with extremely workable characteristics referred to as high slump. Pns also allows concrete to be produced with very low water/cement ratios at low or normal slumps.Poly naphthalene sulfonate formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation. Addition ratespoly naphthalene sulfonate formaldehyde can be added directly or added in after melt. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.Poly naphthalene sulfonate formaldehyde directionprepare solutions as required.Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds. Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each.
Sodium Lignosulphonate
Supplier: Salt and salt chemicals, sodium chloride (salt), sodium sulphate, sodium sulfite, sodium bisulfite, sodium carbonate (soda ash), sodium metabisulphite
Appearance white granule Particle size 2-4mm Purity 99% min Nitrogen 15.5% min Nitrate Nitrogen 14.1%-14.4% Ammoniacal Nitrogen 1.1%-1.3% Calcium 19% min Moisture 0.8% max Water insoluble matter 0.2% max Nitric 0.05% max Iron 0.005% max PH 5.6-6.8
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide. Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity. Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3. Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials. Spillage Treatment Method:Simple cleaning and burying Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun. Packing :Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Other Information: Anti-caking agent can be added at the request of customers. Technical Specifications Analysis items Standard Na2SiF6 99% min Loss of weight on drying at 105â?? 0.3% max Free acid (as HCl) 0.1% max Chloride (as Cl) 0.1% max Sulphate (SO4) 0.3% max Iron(Fe) 0.02% max Water-insoluble matter 0.5% max Particle size distribution Passing through 40 mesh sieve 98% min Passing through 60 mesh sieve 90% min Passing through 325 mesh sieve 25% max
